Post on 14-Dec-2015
transcript
Today’s Solution
• QMI 3-Step Fuel System Cleaning
Two-Stage Cleaning
1. Light volatiles quickly clean gum and varnish deposits
2. Thermally stable components remain to soften and remove hard carbon deposits– Also lubricate while cleaning
– Condition to reduce future deposits
Test Proven – Reduced Emissions
Before Test ResultsExhaust Emissions Test Results (Before): Vehicle H.C. (PPM) CO% CO2% O2% NOx (PPM) 96 Tarus GL 130 0.80 13.80 0.60 863 V-6 3.0L 68K miles 99 Dodge Dakota P/U 86 0.60 14.80 0.30 1239 V-8 5.0L 28K miles Exhaust Emissions Test Results (After): Vehicle H.C. (PPM) CO% CO2% O2% NOx (PPM) 96 Tarus GL 3 0.20 15.10 0.10 193 V-6 3.0L 68K miles 99 Dodge Dakota P/U 2 0 14.90 0 240 V-8 5.0L 28K miles
Vehicle HC (PPM) CO (%) CO2 (%) O2 (%) NOX (PPM)
96 Taurus GL
V-6 3.0L 68K mi.
130 0.80 13.80 0.60 863
99 Dodge Dakota P/U
V-8 5.0L 28K mi.
86 0.60 14.80 0.30 1239
After Test ResultsVehicle HC (PPM) CO (%) CO2 (%) O2 (%) NOX (PPM)
96 Taurus GL
V-6 3.0L 68K mi.
3 0.20 15.10 0.10 193
99 Dodge Dakota P/U
V-8 5.0L 28K mi.
2 0 14.90 0 240
1. QMI Fuel System Cleaner
• Cleans fuel tank to exhaust– Fuel tank, pump, fuel delivery
system, fuel injectors, valves, combustion chambers, etc.
• Especially injector deposits
1. QMI Fuel System Cleaner
• Powerful water scavenging
– No Alcohol or Methanol
1. QMI Fuel System Cleaner
• Water droplets– Cause rust, corrosion, freezing
– One droplet destroy diesel injector tip
• Super-heated steam pressure
• Ever-Wear water scavengers– Create hydrogen bond between
water and fuel molecules
1. Permanently solubilizes water into fuel
2. Micronizes water into fuel
1. QMI Fuel System Cleaner
• Solubilized / micronized water– Eliminates rust, corrosion, freezing– Will not damage injector tip
• Convert water from “problem” into “combustion improver”
• Squelches hot spots• Reduces “knock”• Improves combustion,
performance
1. QMI Fuel System Cleaner
• Combustion modifiers – Slow the fuel burn
• More complete combustion
– Increase power– Improve fuel efficiency– Reduce pinging– Reduce emissions
1. QMI Fuel System Cleaner
• Top oils– Lubricate fuel pump, injectors,
valves, upper cylinder area and top rings
• Elastomer rejuvinators– Restore seal and o-ring elasticity – Reduces failures
• Helps extend engine life
2. QMI Oil System Treatment
• Cleans piston ring land deposits
– Reduces blow-by, oil consumption
– Improves compression
• Frees sticky valves & lifters
• Restores seal elasticity
• Lubricates, prevents wash-down
• Conditions while cleaning
3. QMI Induction Cleaner
• Cleaning solution introduced through a vacuum source
• Cleans intakemanifold, runnersintake valves, combustion chambers
• Restores free “breathing”
3. QMI Induction Cleaner
• Easy to install– No expensive
equipment
• Restores performance and fuel economy, reduces emissions
– No multiple adapters,one fits all
QMI 3-Step Fuel System Cleaner
• We hope you’ll enjoy our fuel system cleaning products that provide:– Satisfied technicians
• Safe
– Satisfied customers• Effective
• Thank you!