Post on 10-Apr-2018
transcript
8/8/2019 Torque Tech Prod Catalog
1/38
The Product Catalog
of Torque Technology
8/8/2019 Torque Tech Prod Catalog
2/38
Starting TorcUPten years ago was a natural extension
of my love and passion for creating,and of my desire to design somethingcompletely new and entrepreneurial.
At the time, customers were having a hard time nding reliable,
consistent, and innovative bolting tools. I realized that a great number
of people were seeking a unique product that was user friendly and
robust in design. I had a innate belief that in order to establish a
successful company it would have to be strictly focused on
functionally and technologically advanced torque tools with proven
performance benets. This was the founding principle of TorcUP and
today remains our guarantee to customers all over the world.
Regards,
John Kovacs - President
TorcUP Inc., USA
8/8/2019 Torque Tech Prod Catalog
3/38
INSIDE
TU Series Square Drive Hydraulic Wrenches
TU SerieS AcceSSorieS And dATA
TX Series Low Profle Hydraulic WrenchesTX SerieS AcceSSorieS And dATA
TBW Series BackUP Wrenches
TBT Specialized Turbine Tooling
EP/AP Series Hydraulic Pumps
ep/Ap SerieS dATA
Industrial Impact Sockets
TT Series Pneumatic Wrenches
TT SerieS AcceSSorieS And dATA
TN Series Hydraulic Nut Splitters
Tn SerieS dATA
TFS Series Flange Spreaders
TFS SerieS dATA
8/8/2019 Torque Tech Prod Catalog
4/38
TU SERIES FEATURES
Patented Mono-Body HousingThis eature allows or direct reaction
against the housing o the tool, as wellas a signicant reduction in housing
fex and torsion.
Dual Independent Swivels360 x 360 swivels allow or individual
movement o duplex hoses. Steelconstruction adds durability.
Push Through Square DriveChange the direction o the tool
rom loosen to tighten by pushingthe Vascomax square drivethrough the tool.
Laser Engraved Torque ChartThe torque chart or the square
drive tool is laser engraved directlyon the shroud to allow or quick
reerence. It also reversesrom Ft/lbs-PSI to Nm-Bar.
Quick Connect CouplersEach tool is tted with quick connect,no-drip, threadless saety couplers, with
4:1 saety ratio.
Reaction ArmSmaller diameter, multi-position reactionarm allows or tool to be positioned better
in tighter applications. The arm is tted witha eld replaceable steel reaction boot.
Reaction Arm Release ButtonProtected within the reaction arm housing,this eature allows or sae and simple
removal and replacement o the multi-position reaction arm.
Body MaterialThe TU Series housing is manuacturedrom 7075 Aircrat Quality lightweight alloy.
U.S. Patent No. 6,068,068
w w w . t o
8/8/2019 Torque Tech Prod Catalog
5/38
1. Extended Reacton Boot 25mm/1 nch: TU-2 ATU-2-03-EXT1 TU-3 ATU-3-03-EXT1 TU-7ATU-7-03-EXT1 TU-11 ATU-11-03-EXT1 TU-27ATU-27-03-EXT1 51mm/2 nches: TU-2 ATU-2-03-EXT2 TU-3 ATU-3-03-EXT2 TU-7ATU-7-03-EXT2 TU-11 ATU-11-03-EXT2 76mm/3 nches: TU-2 ATU-2-03-EXT3 TU-3 ATU-3-03-EXT3 TU-7ATU-7-03-EXT3 TU-11 ATU-11-03-EXT32. End Cap Protector TU-2 ATU-2-03-EC TU-3 ATU-3-03-EC TU-7ATU-7-03-EC TU-11 ATU-11-03-EC TU-27ATU-27-03-EC
3. Extended Reacton Tube TU-2 ATU-2-03-ERT TU-3 ATU-3-03-ERT TU-7ATU-7-03-ERT TU-11 ATU-11-03-ERT TU-27ATU-27-03-ERT4. Non-Push Through Square Drve TU-2 TU-2-11C TU-3 TU-3-11C TU-7TU-7-11C TU-11 TU-11-11C5. Drect Hex Drve Adaptor
TU-2 ATU-2-11-### TU-3 ATU-3-11-### TU-7ATU-7-11-### TU-11 ATU-11-11-### TU-27ATU-27-11-###
6. Housng Reacton Pad 7. Tool Carryng Handle
TU-2 ARW-2 TU-3 ARW-3 TU-7ARW-7 All Tools ACC-TCH-8
TU SERiES Accessores
8/8/2019 Torque Tech Prod Catalog
6/38
TU SERiES Techncal and Dmensonal Data (Imperial/Metric)
SQUARE DRIVE
MIN TORQUE(Ft/lbs)
MAX TORQUE(Ft/lbs)
MIN TORQUE(Nm)
MAX TORQUE(Nm)
OUTPUT ACCURACY
REPEATABILITY
DUTY CYCLE
TOOL WEIGHT(lbs)
TOOL WEIGHT(Kg)
HEIGHT
LENGTH 1
LENGTH 2
RADIUS
WIDTH 1
WIDTH 2
WIDTH 3
TU-2
3/4
127
1270
172
1722
+/- 3%
100%
100%
3.9
1
4.20
4.82
6.34
0.98
2.00
2.79
4.42
TU-3
1
330
3330
447
4514
+/- 3%
100%
100%
9
4
5.30
6.20
8.20
1.29
2.63
3.68
5.81
TU-7
1 1/2
740
7400
1003
10031
+/- 3%
100%
100%
19
8
7.14
8.45
11.19
1.75
3.61
5.06
7.98
TU-11
1 1/2
1100
11010
1491
14925
+/- 3%
100%
100%
29
13
7.81
9.25
12.25
1.91
3.95
5.43
8.72
TU-27
2 1/2
2720
27200
3687
36872
+/- 3%
100%
100%
70
31
10.19
12.32
16.33
2.46
5.26
7.57
11.63
TU-60
2 1/2
5800
58000
7862
78625
+/- 3%
100%
100%
130
58
11.50
15.38
20.40
3.10
6.58
8.89
14.29
292.1
390.7
518.2
78.7
167.1
225.8
363.0
258.8
321.9
414.8
62.5
133.6
192.3
295.4
198.4
235.0
311.2
48.5
100.3
137.9
221.5
181.4
214.6
284.2
44.5
91.7
128.5
202.7
134.6
157.5
208.3
32.8
66.8
93.5
147.6
106.7
122.4
161.0
24.9
50.8
70.9
112.3
8/8/2019 Torque Tech Prod Catalog
7/38c u p . c o m
8/8/2019 Torque Tech Prod Catalog
8/38
TX SERIES FEATURES
Patented Peanut-Shaped PistonThis eature allows the cylinder and ratchet
link to be the same width. Friction reducingsliders prevent wear on the piston.
Dual Independent Swivels360 x 360 swivels allow or individual
movement o duplex hoses. Steelconstruction adds durability.
Hex Link CassettesSteel alignment pins connect lower
reaction area or added strength.
Quick Connect CouplersEach tool is tted with quick connect, no-drip,
threadless saety couplers, with 4:1 saety ratio.
Cylinder and Link MaterialBoth cylinder and link are manuacturedrom 4340 Aircrat Quality high strength
steel alloy.
Nose RadiusTight nose radius allows thistool to t in applications where
clearance constraints make
other tools too bulky.
In-Line Reaction PadThis design ensures torsion-
ree reaction every time.
Link PinOne pin or link to cylinder
engagement - no tool requiredor swapping ratchet links.
U.S. Patent No. 6,223,836
w w w . t o
8/8/2019 Torque Tech Prod Catalog
9/38
1. Hex Reducer
TX-1AHR1-###-### TX-2AHR2-###-### TX-4AHR4-###-### TX-8AHR8-###-###
TX-16AHR16-###-### TX-32AHR32-###-###
2. Low Pont Reacton Paddle
TX-1TX-1RP TX-2TX-2RP TX-4TX-4RP TX-8TX-8RP TX-16TX-16RP TX-32TX-32RP3. inlne Extenson Arm
TX-1TX-1-EXT TX-2TX-2-EXT TX-4TX-4-EXT TX-8TX-8-EXT TX-16TX-16-EXT TX-32TX-32-EXT
4. Hex To Square Drve Adaptor
TX-1AHS1-###-# TX-2AHS2-###-# TX-4AHS4-###-# TX-8AHS8-###-#
TX-16AHS16-###-# TX-32AHS32-###-#
TX SERiES Accessores
8/8/2019 Torque Tech Prod Catalog
10/38
HEX RANGE FROM
HEX RANGE TO
MIN TORQUE(Ft/lbs)
MAX TORQUE(Ft/lbs)
MIN TORQUE(Nm)
MAX TORQUE(Nm)
OUTPUT ACCURACY
REPEATABILITY
DUTY CYCLE
CYLINDER WEIGHT(lbs)
CYLINDER WEIGHT(Kg)
LINK WEIGHT FROM(lbs)
LINK WEIGHT TO(lbs)
LINK WEIGHT FROM(Kg)LINK WEIGHT TO(Kg)
LENGTH
WEIGHT
WIDTH 2
RADIUS
TX-1
5/8
1 5/8
45
560
61
759
+/- 3%
100%
100%
1
0.45
1
1
0.450.45
4.37
3.25
0.78
0.23
TX-2
3/4
2 3/8
192
1928
260
2614
+/- 3%
100%
100%
3.50
1.50
2.40
3.50
1.001.50
6.45
4.00
1.25
0.36
TX-4
1
3 1/8
395
3950
535
5355
+/- 3%
100%
100%
6.00
2.70
5.40
7.60
2.403.40
7.87
5.60
1.63
0.46
TX-8
1 7/8
4 1/8
830
8630
1125
11699
+/- 3%
100%
100%
11.70
5.00
11.90
14.50
5.506.50
10.20
7.00
2.05
0.54
TX-16
2 5/8
5 1/4
1560
16600
2115
22503
+/- 3%
100%
100%
16.00
7.30
21.00
28.00
9.5013.00
12.93
7.58
2.50
0.65
TX-32
3 1/8
6 1/2
3220
35650
4365
48327
+/- 3%
100%
100%
26.00
11.50
29.00
39.50
13.0017.90
15.80
9.50
3.24
0.93
17mm
41mm
111.0
82.6
19.8
5.8
TX-45
3 1/8
6 1/2
4850
47380
6575
64228
+/- 3%
100%
100%
29.00
13.00
29.00
39.50
13.0017.90
16.75
10.28
4.88
0.93
19mm
60mm
163.8
101.6
31.8
9.1
25mm
80mm
199.9
142.2
41.4
11.7
50mm
105mm
259.1
177.8
52.1
13.7
65mm
135mm
328.4
192.5
63.5
16.5
80mm
165mm
401.3
241.3
82.3
23.6
80m
165
425
261
124
23.6
TX SERiES Techncal and Dmensonal Data (Imperial/Metric)
8/8/2019 Torque Tech Prod Catalog
11/38c u p . c o m
8/8/2019 Torque Tech Prod Catalog
12/38
When requests for toolscome in, Brian steps up to the plate.For the past eight years Brian has taken charge of ensuring that
products on TorcUP shelves meet our high standards, and are on
hand to expedite to our customers.
Each time our engineering team releases a design, Brian is the
one to make it happen. From standard spare parts to application
specic custom tooling, he has the skill to turn an on-screen concept
image into an industry-ready tool. Brian truly revels in providing
the thousands of tools that ship worldwide. As tools leave
our facility Brian is there to lay the groundwork for the next
immediate shipment.
Brian Bricco - Director o Operations
w w w . t o
8/8/2019 Torque Tech Prod Catalog
13/38c u p . c o m
8/8/2019 Torque Tech Prod Catalog
14/38
TBW SERIES FEATURES
The Only Backup You NeedThe TorcUP TBW Series BackUP Wrench
eliminates the need or striker wrenches,shims and vice grip style backup wrenches.
Industrial ConstructionIts heavy duty industrial construction
is ergonomic and sae.
Totally MechanicalThe TBW Series backup wrench is totally
mechanical and has no hydraulics.
Ergonomic DesignEasy to release design.
TorcUP
Just between us,
there is no better backup.
w w w . t o
8/8/2019 Torque Tech Prod Catalog
15/38c u p . c o m
8/8/2019 Torque Tech Prod Catalog
16/38
TBT SERIES FEATURES
Large Line o ToolingOur Line o Turbine Tooling includes StandardSlugging Wrenches, Standard Stack Sockets,Castellated Slugging Wrenches, Castellated
Sockets and Castellated Stack Sockets.
High StrengthMade o the same high strength steel alloyas our Industrial Impact Sockets.
Up to Industry StandardsTorcUP Turbine Tools are made to the
specications o industry standards.
w w w . t o
8/8/2019 Torque Tech Prod Catalog
17/38
TorcUP
Show us your turbines,
well show you our tools.
c u p . c o m
8/8/2019 Torque Tech Prod Catalog
18/38
EP SERIES FEATURES
Clydesdale TechnologyCool running continuous duty action.
Powerul MotorPermanent Magnet Motor is available
in .5 HP and 1.5 HP versions.
Quick Connect CouplersEach pump and hose is tted with
quick connect, no-drip, threadless saetycouplers, with 4:1 saety ratio.
Efcient Motor DesignLower RPM requirements meana longer lie or your pump.
Lower Amp Requirement3,000 RPM Motor requires loweramperage and allows or
extension cord use.
Protected MotorCustom molded protective
shroud with carrying handleallows or ease o mobility.
Quadra-Torc FunctionAvailable in single and multi-portdesigns or running multiple
tools simultaneously.
w w w . t o
8/8/2019 Torque Tech Prod Catalog
19/38
RESERVOiR SiZE VALVE MOTOR SPEC FLOW RATE@115 VAC WEiGHT(LBS
CONTROL TYPE PERMANENT MAGNET 600 Psi 10,000 Psi
EP10001 GALLON
SOLENOID 4 WAY/3 POS. 1.5 HP SINGLE PHASE 700 in3/min 50 in3/min 56EP1000-Q
2 GALLON
EP5001 GALLON
SOLENOID 4 WAY/3 POS. 0.5 HP SINGLE PHASE 400 in3/min 20 in3/min 45
RESERVOiR SiZE VALVE MOTOR SPEC FLOW RATE@220 VAC WEiGHT(Kg)
CONTROL TYPE PERMANENT MAGNET 41,4 Bar 700 Bar
EP1000
3.8 LITER SOLENOID 4 WAY/3 POS. 1,1 Kw SINGLE PHASE 6,6 L 0,8 L 25,4EP1000-Q7.5 LITER
EP500
3.8 LITER SOLENOID 4 WAY/3 POS. 0,4 Kw SINGLE PHASE 6,6 L 0,3 L 20,4
EP SERiES Techncal and Dmensonal Data (Imperial/Metric)
8/8/2019 Torque Tech Prod Catalog
20/38
TorcUP
Under Pressure.
Even better than the song.
AP SERIES FEATURES
Clydesdale TechnologyCool running continuous duty action.
Protective Roll CageEach pump comes tted into a roll cage
or protection o the motor.
Quick Connect CouplersEach pump and hose is tted with quickconnect, no-drip, threadless saetycouplers, with 4:1 saety ratio.
Quadra-Torc FunctionAvailable in single and multi-port designs
or running multiple tools simultaneously.
Heavy Duty MotorPowerul 1.5 HP industrial duty air motor.
Low Air RequirementsRuns on as little as 50 cm/80 PSI.
c u p . c o m
8/8/2019 Torque Tech Prod Catalog
21/38
AP SERiES Techncal and Dmensonal Data (Imperial/Metric)
RESERVOiR SiZE VALVE MOTOR SPEC FLOW RATE@50cmf/90psi WEiGHT(LBS
CONTROL TYPE 600 Psi 10,000 PsiAP1000
2 GALLON SOLENOID 4 WAY/3 POS. 1.5 HP ROTARY AIR 600 in3/min 50 in3/min 54
RESERVOiR SiZE VALVE MOTOR SPEC FLOW RATE@3900L/min/6,2bar WEiGHT(Kg)
CONTROL TYPE 41,4 Bar 700 Bar
AP1000
7.5 LITER SOLENOID 4 WAY/3 POS. 1,1 Kw ROTARY AIR 6,6 L 0,8 L 24,5
8/8/2019 Torque Tech Prod Catalog
22/38
6)
10)
1)
2)5)
9)
1) Bolting and maintenance on the Golden Gate Bridge 2)
4) Construction in the U.S. 5) The TorcUP India Sales Team 6) Rus
Done in China 9) Big TU-60 Used in Germany10) Crane Manuact
w w w . t o
8/8/2019 Torque Tech Prod Catalog
23/38
3)4)
8)
P Exhibiting at the Hannover Fair 3) Repair Shop in Australia
efneries 7) Equipment Manuacturer in Norway 8) Demonstrations
China 11) Shipyard in Singapore 12) Flange Spreader in Power Plant
12)
c u p . c o m
7)
11)
8/8/2019 Torque Tech Prod Catalog
24/38
TSK SERIES FEATURES
Unbelievable StrengthAll TorcUP Industrial Impact Sockets aremade rom high strength alloy steel, heat
treated or the best combination o strength,and impact resistance.
Our Sockets Do What Others ClaimWith optimum wall thickness, TorcUP sockets
have the strength to withstand the necessarytorque and the access to reach the mostrestricted o nuts.
Accommodating DesignThe depth o the hex openings are designed
to accommodate the nut or ull engagement.
Free Corner DesignTorcUPs entire line o Industrial ImpactSockets eature ree corner design orfats above 5/8 (17mm).
Sae Attachment DesignO-ring and drive pin included with every
socket or sae square drive attachment.
w w w . t o
8/8/2019 Torque Tech Prod Catalog
25/38
TorcUP
Weve got your nuts covered.
c u p . c o m
8/8/2019 Torque Tech Prod Catalog
26/38w w w . t o
8/8/2019 Torque Tech Prod Catalog
27/38
He closes his eyes and imaginesdreams
Then he opens his eyes and makes his visions a reality!It is hard to conceive that this is how we begin inventing each of our products at TorcUP. For our tool
designer, Kevin, there is no other way.
Since Kevin was a teenager, he has always had a strong interest in creating industrial hydraulic bolting tools.
He spends countless hours glued to his computer, with the task of taking rough designs and actualizing them
into real-world performing tools. Utilizing computer programs like Auto-Cad, Solid Edge and Inventor,
along with his passion and experience, Kevins creations have become some of the most robust working
tools used in our industry today.
Kevin Kemmerer - Senior Engineer
c u p . c o m
8/8/2019 Torque Tech Prod Catalog
28/38
TT SERIES FEATURES
Square DriveDirect Socket Engagement.
Available in 3/4, 1 or 1 1/2 Square Drives.
Pistol GripFirm Pistol Grip Control.
Reaction MemberSturdy Non-Welded Construction.
Air DriveConstant Speed Rotation.
Internal Gear DriveRobust Planetary Design.
Operation TriggerFinger Controlled Forward/Reverse.
w w w . t o
8/8/2019 Torque Tech Prod Catalog
29/38
1. TT Seres Nose Extenson
AVAILABLE FOR ALL SIZE TOOLS
2. TT Seres Sldng Reacton Arm
CUSTOM ARM, MADE TO ORDER
3. TT-F/R/L Flter/Regulator/Lubrcator Unt
COMES STANDARD IN CARRYING CAGE, WITH 8 / 2.4m AIR HOSE
TT SERiES Accessores
8/8/2019 Torque Tech Prod Catalog
30/38
TT SERiES Techncal and Dmensonal Data (Imperial/Metric)
SQUARE DRIVE
MIN TORQUE(Ft/lbs)
MAX TORQUE(Ft/lbs)
MIN TORQUE(Nm)
MAX TORQUE(Nm)
TOOL WEIGHT(lbs)
TOOL WEIGHT(Kg)
DIAMETER D1
DIAMETER D2
DIAMETER D3
HEIGHT
PERFORMANCE(rpm)
TT-30
3/4
122
357
165
485
15.43
7
1.61
3.35
3.47
11.02
48
TT-80
1
269
796
365
1080
19.84
9
2.13
3.35
3.47
11.81
15
TT-120
1
435
1276
590
1730
19.84
9
2.13
3.35
3.47
11.81
10
TT-200
1
671
1969
910
2670
19.84
9
2.13
3.35
3.47
11.81
8
TT-320
1 1/2
1099
3231
1490
4380
26.46
12
2.84
3.86
3.86
11.81
4
40.9
85.1
88.1
279.9
54.1
85.1
88.1
299.9
54.1
85.1
88.1
299.9
54.1
85.1
88.1
299.9
72.1
98.0
98.0
299.9
8/8/2019 Torque Tech Prod Catalog
31/38c u p . c o m
8/8/2019 Torque Tech Prod Catalog
32/38
TN SERIES FEATURES
Easy to UseThe TN Series sets up in no timeand cuts within minutes.
The TN Does What Others CannotWhen you just cant turn the nut,
the TN Series Nut Splitter is theway to go.
A Very Sae ToolWith the TN Series, there is no worryin regards to sparks, fames, or fying
ragments. There are NONE.
A Time Saving ToolCuts nuts in seconds compared to the
hours youd spend with a torch.
Flexible DesignThe TN Series Nut Splitters have beendesigned to t all API and ANSI fanges.
A Versatile ToolCuts the hardest o nuts with absolutely
no damage to the stud.
w w w . t o
TNNutSplitterAngleHead(modelTN-100)
TNNutSplitter(m
odelTN-105toTN-505)
8/8/2019 Torque Tech Prod Catalog
33/38
TN SERiES Techncal and Dmensonal Data (Imperial/Metric)
TN-100
TN-105
TN-200
TN-205
TN-210
TN-310
TN-315
TN-405
TN-500
TN-505
A/F RANGE
1/2-1
5/8-1 7/16
1 7/16-2
1 13/16-2 3/8
2 1/4-2 3/4
2 3/4-3 1/2
3 1/8-3 7/8
3 3/4-4 1/4
4 1/2-5
4 7/8-5 3/8
12.7-25.4
15.9-36.5
36.5-50.8
46.0-60.3
57.2-69.9
69.9-88.9
79.4-98.4
95.3-108.0
114.3-127.0
123.8-136.5
A
11/16
1 1/2
1 1/2
2 1/4
2 1/4
3 1/16
3 1/8
3 3/4
4 1/8
4 1/8
17.5
38.1
38.1
57.2
57.2
77.8
79.4
95.3
104.8
104.8
B
10 1/4
10 7/16
11 5 /16
15 5/32
15 11/16
18 1/8
19 7/32
22 13/16
23 7/32
23 17/32
260.4
265.1
287.3
385.0
398.5
460.4
488.2
579.4
589.8
597.6
C
30
60
45
30
30
30
30
60
60
60
30
60
45
30
30
30
30
60
60
60
D
1/4
3/8
1/2
9/16
11/16
3/4
7/8
1 1/8
1 1/8
1 1/8
6.4
9.5
12.7
14.2
17.5
19.1
22.2
28.6
28.6
28.6
E
1 1/16
1 1/2
2 1/8
2 1/2
2 7/8
3 7/8
4 1/4
4 5/8
5 3/8
5 7/8
27.0
38.1
54.0
63.5
73.0
98.4
108.0
117.5
136.5
149.2
F
2 7/8
4 1/8
4 1/4
6 7/16
6 7/16
8 7/16
8 7/16
9 7/8
9 7/8
9 7/8
73.0
104.8
108.0
163.5
163.5
214.3
214.3
250.8
250.8
250.8
WEiGHT
8.20
21.60
22.90
71.50
72.30
158.66
163.94
251.20
256.56
262.90
3.72
9.80
10.39
32.43
32.79
71.97
74.36
113.94
116.37
119.25
8/8/2019 Torque Tech Prod Catalog
34/38
TFS SERIES FEATURES
Use the ForceThe TFS Series Flange Spreader can give
you over 10,000 lbs o spreading orce.
A Tool That Stays PutThis tool eatures parallel opening jawswithout drit. It stays where you set it.
Very Large SpreadWith a ull operation spread o 3, this
tool is a must when dealing with fanges.
Multiple VersionsThe TFS Series is always available in
both Hydraulic and Manual versions.
TorcUP
Hell o a set o jaws.
c u p . c o m
8/8/2019 Torque Tech Prod Catalog
35/38
SPECiFiCATiONS iMPERiAL METRiC
WEIGHT TFS-10H 15.5 LBS 7.0 KG
WEIGHT TFS-10M 17.0 LBS 7.7 KG
LENGTH TFS-10H 13.25 33.6 MM
LENGTH TFS-10M 14 35.5 MM
WIDTH OF FEET 4.5 114 MM
WIDTH OF BODY 4 101 MM
TIPS CLOSED 0.9 2.3 MM
TIPS OPEN 3 76.2 MM
TIP PENETRATION 1.5 38.1 MM
RATED FORCE 10,000 LBS 4,535 KG
TFS SERiES Techncal and Dmensonal Data (Imperial/Metric)
8/8/2019 Torque Tech Prod Catalog
36/38
We have created theworlds ultimate hydraulicbolting tools. Our productsare designed to perform withless parts, in order to gainless friction, and to decreasethe overall loss of power.
We provide ongoing support with operational training
and care of all tools, free repair of warranty tools,
and no-cost temporary replacements. At TorcUP,
we strive to become your total product solution.
The customer will be completely satised with theperformance, operation, support and overall value of
their TorcUP System.
The customers staff will be thoroughly trained tothe customers satisfaction on the proper operation and
care of their TorcUP System.
If the TorcUP System should fail to operate properlyunder normal usage within 13 months of purchase, the
system will be repaired at no charge.
If the TorcUP System cannot be repaired underwarranty at the customers site, TorcUP will furnish
the customer with loaner components as needed at no
charge during the warranty period.
w w w . t o r c u p . c o m
The TorcUP Comprehensive Factory Warranty
Take everything that you have ever known to be
true about hydraulic bolting tools and Torc it UP.
MoreACCURATE.MoreREPEATABLE.MoreCONSISTENT.
TorcUP. Like no other wrench. Like no other company.
The warranty does not cover improper use oroperation of tooling.
If during the warranty period, the tooling must bereturned to the TorcUP Repair Facility for warranty
maintenance, the customer will be provided with a
loaner unit at no charge for the duration of the repair.
TU Series Wrenches-13 Months rom Date o Purchase
TX Series Wrenches-13 Months rom Date o Purchase
TT Series Wrenches-13 Months rom Date o Purchase
EP and AP Series Pumps-13 Months rom Date o Purchase
TN Series Nut Splitters-13 Months rom Date o Purchase
TBW Series BackUP Wrenches-13 Months rom Date o Purchase
TFS Series Flange Spreaders-13 Months rom Date o Purchase
Accessories-13 Months rom Date o Purchase
TSK Sockets -Lietime
The Warranty covers factory defects for the
following lengths of time dependent upon
the tooling purchased:
8/8/2019 Torque Tech Prod Catalog
37/38
At TorcUP we are genuine.Our people and our tools deliver what others claim they can. We
hide absolutely nothing from our customers or our competitors.
We believe. From our humble beginnings in Easton, Pennsylvania,
our small group of employees built a tool brand from scratch. The
TorcUP brand is now an established worldwide supplier to some
of the largest industries on every continent.
We deliver uniqueness to our customers. We are certain that
customers all over the world will continue to benet from TorcUP,
not only as their trusted tool brand, but also as their tool
supplier. TorcUP still creates all of its tools in-house in Easton, PA.
And each of our tools still remain truly individual.
8/8/2019 Torque Tech Prod Catalog
38/38
For Worldwide Sales & Service, call TorcUP at 888 TORCUP1
w w w . t o r c u p . c o m
TorcUPBolting Your World
Worldwide Headquarters
1025 Conroy PlaceEaston, PA 18040
+1-610-250-5800
888-TORCUP-1
+1-610-250-2700
sales@torcup.com
Other Locations in:
Europe
China
Middle East
Australia