Post on 23-Mar-2019
transcript
SustainableArchitecturalSolutionsGreen Sustainable Building Products or eco-friendly products refer to building materials and its manufacturing process which is environmentally responsible and resource efficient throughout a product’s life cycle, from raw material processing stage , energy consumption during manufacturing process till delivery, packaging and disposal. Green Building Products are durable and high in performance which directly or indirectly increases the efficiency of the construction and performance of a building.
TPI Wood & Board are fiber cement mineral plank / board products made from recycle cellulose fibers, sand, water and cement. TPI wood and board are sustainable building siding / paneling products which are more durable than wood and has longer life span as compared to conventional timber plank or timber board.Hence, indirectly reduced the maintenance and resources. TPI Wood collections are designed to replicate the real wood appearance with woodgrains to substitute natural timber wood / plank especially for external facade or application which are subjected to rough weather condition and moisture.
thinkeco
withwith
Eco-friendly!
Sustainable.
Lightweight&easytoinstall.
Durable&longlasting.
Resistanttorot&insects,muchbetterthannaturaltimber.
Doesnotrequireanywoodchemicaltreatments.
Naturallyfireresistant.
Durableinharshweather.
Alarming FACTS About Timber :
WeatherResistant
TermiteResistant
DimensionallyStable
HighWorkability
EnvirontmentFriendly
Water�&�MoistureResistance
FireResistance
NONASBESTOS
If we don’t stop
DEFORESTATION,80 to 90% of tropical rainforest systemwill be destroyed by the
year2020hectare1
In Merbau rich forests,
Merbau Trees
only10 to15are seen in aHECTARE OF LAND.
20% 13%
Deforestation and forest degradationRepresent up to 20% of globalANTHROPOGENIC Co2 EMISSIONS,MORE THAN THE ENTIRE GLOBAL TRANSPORTSECTOR (wHICH ACCOUNTS FOR 13%)
2 soccerfields
Bahan Binaan
KELAS�ʻOʼ
CERT. NO: FL000047BS 476 : PART 6 : 1989 + A1 :2009
BS 476 : PART 7 : 1997
WOOD
TPI Wood Profile Plank is termite and rot resistant, making it an ideal interior and exterior siding. Its cassia texture in addition to the elegant wall grooves makes it an excellent and wood look substitute for the timber stone cut.
WOOD PLANK
Smooth Texture
TPI Wood Plank is synthetic wood manufactured from fibre cement. The wood plank gives high-class texture finishing that enhances the beauty of realistic wood surfaces, which can be used perfectly for both indoor and outdoor applications. Additionally, it is free of asbestos.
TEXTURE
TEXTURE
Cassia Texture
Smooth Texture
UNCOLOURED
UNCOLOURED
120 mm
SPECIFICATION
TPI-PPS10150SCTPI-PPC10150SC
10 x 150 x 3,00010 x 150 x 3,000
245245
SmoothCassia
Stone CutStone Cut
6.76.7
2.572.57
Packing(Pcs/Plt)Item Code Dimension (Thk x W x L) mm Pcs/SqmTexture Weight
(Kg/Pcs)Profile/Edge
SPECIFICATION
TPI-WPC150TPI-WPT150TPI-WPC200TPI-WPT200TPI-WPT230TPI-WPS230TPI-WPT12230TPI-WPS12230
8 x 150 x 3,0008 x 150 x 3,0008 x 200 x 3,0008 x 200 x 3,0007.5 x 230 x 3,6607.5 x 230 x 3,66012 x 230 x 3,66012 x 230 x 3,660
420420300300240240144144
CassiaTeak
CassiaTeakTeak
SmoothTeak
Smooth
Square CutSquare CutSquare CutSquare CutSquare CutSquare CutSquare CutSquare Cut
5.45.47.27.29.49.415.115.1
2.672.672.002.001.181.181.181.18
Packing(Pcs/Plt)Item Code Dimension (Thk x W x L) mm Pcs/SqmTexture Weight
(Kg/Pcs)Profile/Edge
10
mm
20
mm
Stone Cut Prole(Shiplap)
PROFILE PLANK
SmoothStone Cut
CassiaSquare Cut
SmoothSquare Cut
TeakSquare Cut
30
mm
Cassia Texture
Teak Texture
CassiaStone Cut
WOOD STRIP
WOOD FENCE
TPI Wood Skirt
To be installedwith nails oradhesive.
WOOD SKIRT
TPI Wood Strip used for both indoor and outdoor strip ceil ing and routing-line ceil ing. It can be painted with any color and stil l as beautiful as real wood. TPI Wood Strip can help reducing the temperature under roofs from ventilation. It is made with high quality, strong, durable material and easy-to-install . Moreover, it is also termite and insect resistance.
TPI Wood Fence beautiful l ike real wood with greater endurance against impact, high heat, humidity, decay, and changes in climate. Even though, TPI Wood Fence have high strength, they are easy-to-install because they can be pierced or sawn effortlessly. In addition, they have light weight, which makes them easy to handle and deliver.
TPI Wood Skirt used for covering the junction occurred between flooring and paneling once the floor is laid, which helps preventing dust from entering. TPI Wood Skirt are specially designed to create the simple, yet modern looks by using smooth curves and perfect edging. Moreover, the skirting boards have high resistance against moisture and insects.
Smooth Texture
Teak Texture
TEXTURE
Smooth Texture
TEXTURE
Teak Texture
TEXTURE
Straight Grain Texture
UNCOLOURED
UNCOLOURED
UNCOLOURED
Square Cut:
V-Cut:
ClassicProle
BevelProle
TeakSquare Cut
SmoothV-Cut
SPECIFICATION
TPI-WSKS850BTPI-WSKS850C
8 x 50 x 3,0008 x 50 x 3,000 540
SmoothSmooth
BevelClassic
1.81.8
540
TPI-WSKS12100BTPI-WSKS12100C
12 x 100 x 3,00012 x 100 x 3,000
144 4.32144 4.32
SmoothSmooth
BevelClassic
Packing(Pcs/Plt)Item Code Dimension (Thk x W x L) mm Texture Weight
(Kg/Pcs)Profile/Edge
SPECIFICATION
TPI-WSTT850TPI-WSTT875TPI-WSTT8100TPI-WSTS875VTPI-WSTS8100V
8 x 50 x 3,0008 x 75 x 3,0008 x 100 x 3,0008 x 75 x 3,0008 x 100 x 3,000
880840600840600
TeakTeakTeak
SmoothSmooth
Square CutSquare CutSquare Cut
V-CutV-Cut
1.82.73.82.73.8
6.674.443.334.443.33
Packing(Pcs/Plt)Item Code Dimension (Thk x W x L) mm Pcs/SqmTexture Weight
(Kg/Pcs)Profile/Edge
Straight GrainSquare Cut
TeakSquare Cut
BevelProle
ClassicProle
SPECIFICATIONPacking(Pcs/Plt)Item Code Dimension (Thk x W x L) mm Texture Weight
(Kg/Pcs)Profile/Edge
TPI-FSG12100 12 x 100 x 3,660 300Straight Grain Square Cut 6.8TPI-FSG1275 12 x 75 x 3,660 420Straight Grain Square Cut
TPI-FT12100 12 x 100 x 3,660 300Teak Square Cut 6.8
5.1
*good for decorative fencing with recommended batten support spacing 300-600mm c/c for better performance.
BOARD CEILING
BOARD FLOOR
TPI Flooring Boards have high quality as composed with the best quality of TPI cement. With the attributes, the boards can bear loads of weight and will not be ruined by termites or other pest . Also, the boards do not absorb moisture so they will not swell or mold, which can extend their l ife expectancy to the maximum level.
TPI Ceiling Boards have special attributes including flat and smooth surface, l ightweight, easy-to-install and the abil ity to withstand all weather conditions because the boards are composed of the fire and humid retardant materials. Therefore, the ceil ing boards can be used for both interior and exterior applications.
BOARD WALL
TPI Wall Boards that have exceptional characteristics including lightweight, high resistantance against heat and humidity, and sonic insulation. The paneling boards are adjustable and can easily be painted, tiled, and plastered as required.
Smooth Texture
UNCOLOURED
Smooth Texture
UNCOLOURED
Smooth Texture
UNCOLOURED
Recessed Edge
Square Cut
SPECIFICATION
TPI-CB4.0 4.0 x 1,220 x 2,440 135Smooth Square Cut 0.3417.8*
* - by orderSquare CutTPI-CB4.5 4.5 x 1,220 x 2,440 120Smooth 20 0.34
Packing(Pcs/Plt)Item Code Dimension (Thk x W x L) mm Pcs/SqmTexture Weight
(Kg/Pcs)Profile/Edge
TPI-WB6TPI-WB8TPI-WB9TPI-WB10TPI-WB12TPI-RB6TPI-RB8
6 x 1,220 x 2,4408 x 1,220 x 2,4409 x 1,220 x 2,440
10 x 1,220 x 2,44012 x 1,220 x 2,4406 x 1,220 x 2,4408 x 1,220 x 2,440
90686054459068
Smooth Square CutSquare CutSquare CutSquare CutSquare Cut
Recessed Edge
Recessed Edge
26.735.6
35.6
40.144.553.426.7
0.340.340.340.340.340.340.34
SmoothSmoothSmoothSmoothSmoothSmooth
SPECIFICATION
*
*
* - by order
Packing(Pcs/Plt)Item Code Dimension (Thk x W x L) mm Pcs/SqmTexture Weight
(Kg/Pcs)Profile/Edge
TPI-FB15TPI-FB18TPI-FB20
15 x 1,220 x 2,44018 x 1,220 x 2,44020 x 1,220 x 2,440
363027
SmoothSmoothSmooth
Square CutSquare CutSquare Cut
69.386.392.4
0.340.340.34
SPECIFICATIONPacking(Pcs/Plt)Item Code Dimension (Thk x W x L) mm Pcs/SqmTexture Weight
(Kg/Pcs)Profile/Edge
Tables below show the wide range of different applications TPI can be used.
Technical Data
Application
TPI Board and TPI Wood are complete mineral cement solution for your residential, commercial and institutional needs. It is certified to international
standards. Refer to the table for the physical, mechanical, fire and durability properties of TPI Mineral Cement Products.
Properties Standard Board Plank
Physical
Mechanical
Fire
Durability
Thickness Tolerance ASTM C1185 ± 6% ± 6%
Density ASTM C11853
1,300 ± 50 kg/m3
1,300 ± 50 kg/m
Water Absorption ASTM C1185 ≤ 35% ≤ 35%
Moisture Content ASTM C1185 ≤ 15% ≤ 15%
Mold Resistance ASTM D3272 Pass Pass
PH Value ISO 10390:2005 7-8 7-8
Water Tightness ASTM C1185 Pass Pass
Modulus Of Rupture at Machine Direction (EMC) ASTM C1185 ≥ 10 MPa ≥ 15 MPa
Modulus Of Elasticity on Machine Direction (EMC) ASTM C1185 ≥ 5,000 MPa ≥ 5,000 MPa
Ignitability BS 476 Part 5 Pass Pass
Fire Propogation Index BS 476 Part 6 Pass Pass
Surface Spread of Flame BS 476 Part 7 Pass Pass
Heat / Rain Resistance ASTM C1185 Pass Pass
Warm Water Resistance ASTM C1185 Pass Pass
Freeze / Thaw Resistance ASTM C1185 Pass Pass
Soak / Dry Resistance BS EN 12467:2000 Pass Pass
Application Ceiling (mm) Wall (mm) Floor (mm)
Interior Ceiling
6 104 8 124.5 9 15 18 20
Exterior Ceiling (Eave, Attic, Arch)
Interior Partition, Wet Area Partition
Subroof, Floor on Slab
Exterior Partition, Wet Area Partition
High Rise Building Partition
Underlay
Raised Floor, Elevated Floor
Weight (kg per sheet) 17.8 20 26.7 35.6 40.1 44.5 53.4 69.3 86.3 92.4
90
0m
m
400mm400mm
1,20
0mm
600mm (max)
1,2
00
mm
(m
ax)
600mm (max)
600mm (max)
Frame Type·�Galvanized Frames (0.4mm thk Double Furring, 0.8mm thk Carrying Channel)·�Treated Wood Frames (2” x 2”)
Frame Spacing·�Double Furring spaced at 400mm.·�Carrying Channel spaced at 900mm·�Timber Frames spaced at 600mm x 600mm
CEILING BOARD INSTALLATIONFrame Type·�Galvanized Frames (0.5mm thk Studs and tracks)·�Treated Wood Frames (2” x 2”/ 2” x 4”)
·�600mm x 1,200mm (max)
WALL BOARD INSTALLATIONFrame Type·�Steel Frames (2.5mm thk RHS, 2mm thk C-Purlin Frames)·�Treated Wood Frames (2” x 4” / 3” x 4” / 4” x 6”)Size and span of the frames should be designed to carry the appropriate load.
Frame Spacing·�300mm x 300mm·�400mm x 400mm·�600mm x 600mm (max)
FLOOR BOARD INSTALLATION
TPI-ver.2-08/2017
TPI MALAYSIA
www.suriwong.com.my
Available at your nearest TPI dealer
First Coat
Second Coat
Finishing Coat
Perforated reinforcing paper tape
or self-adhering fiberglass mesh tape
200 mm
200 mm
200 mm
50 mm50 mm50 mm
300 mm
300 mm
300 mm
60 mm
Storage & Handling
Should be kept in a shady dry place
and use 5 pieces of wooden planks
with the size of 1.5” x 3” as the
foundation. 4mm. boards can be
piled up to 200 pieces and 130
pieces for 6 mm. boards.
The TPI Wood & Board
should be lifted on both
sides horizontally and
paralelly to the floor.
Recommended Tools
Drilling MachineFor fixing screw with speed0-2, 500 rpm and 550 watts.
Cutting BladeDiamond blade 4 inch is recommendedfor handling machine and 7 inchfor cutting table.
Cutting MachineFor cutting TPI Wood and Board withspeed 13,000 rpm and 1,200 watts.
Accessories
SDWR
STEEL
SCR
WOOD
-Suitable for fastening timber (plywood) or fiber cement board to STEEL structure.
CODE SIZE #8
SDWR - 832
SDWR - 845
SDWR - 855
BMT< 3.0MM
(#8 X 1 1/4”)
(#8 X 1 3/4”)
(#8 X 55MM)
-Suitable for fastening timber (plywood) or fiber cement board to WOOD structure.
SCR - 832
SCR - 845
SCR - 855
(#8 X 1 1/4”)
(#8 X 1 3/4”)
(#8 X 55MM)
CODE SIZE #8
TPI Ceiling Board
Fig. 1
TPI Wall Board
TPI Floor Board
All board are available in 1220 mm x 2440 mm (4’ x 8’)
Frame Spacing
Fig. 2 Fig. 3
Fig. 4 Fig. 5
38 mm. (min) 38 mm. (min)
12 mm.
3 mm.Polyurethane sealant
12 mm.
3 mm.