Post on 12-Sep-2021
transcript
Updated on 21-Oct-2010 Page 1 of 10
2010 © True Internet Co., Ltd. All rights reserved.
Manual
Traffic Exchange
Updated on 21-Oct-2010 Page 2 of 10
2010 © True Internet Co., Ltd. All rights reserved.
Index
Pages
1. To access the Traffic Exchange 3
2. Checking User Log 5
3. Change Password 7
4. Troubleshooting 9
Updated on 21-Oct-2010 Page 3 of 10
2010 © True Internet Co., Ltd. All rights reserved.
Access to Traffic Exchange
The Traffic Exchange can access from web browser such as Internet Explorer, Safari and Firefox
(recommended).
Computer system requirement
- Microsoft Windows XP, OR Microsoft Windows 2000 Server, Advanced Server, or Professional
- Internet Explorer 7.0 or higher, Safari 3.0 or higher and Mozilla Firefox 3.0 or higher(recommended)
- CPU 700 MHz Pentium III or higher
- RAM: 256 MB (minimum); 512 MB(recommended) or higher
- Bandwidth: 256 kbps (minimum); 512kbps (recommended) or higher
How to access the Traffic Exchange as follows,
1. Open web browser and type the URL -> https://trafficexchange.trueinternet.co.th as Figure 1.
Figure 1
Updated on 21-Oct-2010 Page 4 of 10
2010 © True Internet Co., Ltd. All rights reserved.
2. Enter User Name and Password and click Sign in as Figure 2.
Figure 2
3. When user sign in successfully, the screen will be shown as figure 3.
Figure 3
Updated on 21-Oct-2010 Page 5 of 10
2010 © True Internet Co., Ltd. All rights reserved.
Checking User Log
If the Traffic Exchange system works normally, user's equipment will sent traffic data to Traffic Exchange
Server (203.44.144.52) as real time by using Fixed IP Address that user assigned when activated service. And
User can check the internet access log as step below.
How to check the user log as follows,
1. When user sign in successfully, Click on the Search menu as Figure 4.
Figure 4
2. The screen will be shown as figure 5.
Figure 5
Updated on 21-Oct-2010 Page 6 of 10
2010 © True Internet Co., Ltd. All rights reserved.
3. Click on Host and click on IP Addresss of user equipment for checking log as Figure 6.
Example IP Addresss of user equipment is 61.91.250.35
Figure 6
4. The screen will show log detail from user equipment such as date, time, IP Address, etc. And IP
Addresss of user equipment: 61.91.250.35 will display on the left top of the screen automatic as figure 7.
Figure 7
Updated on 21-Oct-2010 Page 7 of 10
2010 © True Internet Co., Ltd. All rights reserved.
Change Password
How to change password as follow,
1. When user sign in successfully, Click on the Manage on the right top search menu of the screen as
Figure 8.
Figure 8
2. The screen will be shown as Figure 9.
Figure 9
Updated on 21-Oct-2010 Page 8 of 10
2010 © True Internet Co., Ltd. All rights reserved.
3. Click on Users, the screen will be shown as figure 10.
figure10
4. Click on the User for set new password and click Save as figure 11.
figure11
Updated on 21-Oct-2010 Page 9 of 10
2010 © True Internet Co., Ltd. All rights reserved.
Troubleshooting
If the Traffic Exchange system works normally, user's equipment will sent internet traffic data to Traffic
Exchange Server (203.44.144.52) as real time.
If the user equipment is not sent internet traffic log to the Traffic Exchange Server. The following are possible
causes of problems,
1. Case: User internet connection has some problems. (May be physical link or internet)
Description
- Check user traffic log at Traffic Exchange Server not found, and users can not use the Internet.
Remedy
- Solve problems by using troubleshooting process for internet issue. When user can use internet
normally, check the traffic log at Traffic Exchange Server again.
2. Case: The user equipment failure occurs or user equipment configuration is modified or Splunk
Forwarder configuration is modified.
Description
- Check user traffic log at Traffic Exchange Server not found, and users can use the internet normally.
Remedy
• In case of user log sender is Firewall equipment.
- Check firewall equipment configuration.
- Check firewall equipment performance such as high CPU and etc.
- Check log sending policies of firewall equipment.
• In case of user log sender is Spunk Forwarder (Windows Agent).
- Check Spunk Forwarder configuration. Open Splunk Forwarder program and click on menu
Manager > Forwarding and receiving > Forward data as figure 12. The host must be
202.44.144.52:9997 and status is enabled.
Updated on 21-Oct-2010 Page 10 of 10
2010 © True Internet Co., Ltd. All rights reserved.
figure12