Post on 24-Oct-2014
transcript
Private and Confidential -EniT Group
Training on ABAQUS
Private and Confidential -EniT Group
Tasks fsdsfsd
Private and Confidential -EniT Group
1. Introduction.
2. Options for Geometric Entities.
3. 2D and 3D FE Generations using ABAQUS/CAE.
4. Pre processing.
5. Solving the problems.
6. Post Processing.
7. Results and Discussions.
ABAQUS6.10 Version
TRAINING ON ABAQUS
Presentations jhhkhk
Results and Discussions ABAQUS
Private and Confidential -EniT Group
Introduction
ABAQUS Performances Faster in calculation time even for second order
element type. Definition of contacts. Good and validated contact methodologies. You can do the tasks with geometry and mesh. Also, it has optimization methods.
ABAQUS will have two ways to model analysis deck.
• Interactive Edition.• Keyword Edition.
Private and Confidential -EniT Group
Introduction
ABAQUS will have two solvers. ABAQUS/Standard (Static L and NL) ABAQUS/Explicit (Dynamic L and NL)
ABAQUS can be used for both Static and Dynamic analysis of linear and nonlinear types.
ABAQUS will have good capability in handling contacts.
Also, it has CFD capabilities.
Private and Confidential -EniT Group
Following operations can be done for the geometries in ABAQUS/CAE
Creation of simple geometry. You can import the geometry (from CATIA,
UG etc). Edit/Cleaning up the geometries. Do the Booleans operations of geometry. Modifications of geometries even after the
mesh. (like resizing of fillets, holes and cut –outs etc).
Geometrical Entities
Private and Confidential -EniT Group
Following FE methods in ABAQUS/CAE 2D Mesh. (Auto/Mapped)
Line mesh. 2D Mesh.
3D Mesh. (Auto/Mapped) 2D to 3D Mesh. 3D Mesh, Sweep Mesh, Drag/Bottom up mesh etc.
Mesh Modifications like edit, move, offset a node etc.
Check the mesh qualities etc. Create the sets/groups for nodes and elements
and also element faces etc.
FE Modeling
Private and Confidential -EniT Group
• Materials and properties assignments• Steps/Analysis type.• Loads and BCs applications.• Results/database output requests.• MPCs (RBE2/RBE3), Contacts creations.• Lunching and Monitoring the
calculations.• Post Results.
Preprocessing
Private and Confidential -EniT Group
• Simple Examples to validate.• Material non linear type.• Geometric non linear type.• Boundary non linear type.
• Contact non linear type.
Examples