Post on 31-Aug-2020
transcript
Design ● Manufacture ● Install
Trolley Hoists
4-5 4-5
CONTENTS
Manual Trolley HoistsHook-Suspension ‘Chain’ Hoists & Hand Geared Trolleys 4-6Low-Headroom (Spark-Proof) 7-8Ultra-Low Headroom (Spark-Proof) 9-10
Pneumatic Trolley HoistsStandard Headroom 12-13Low Headroom 14-15Ultra-Low-Headroom 16-17Rack & Pinion 18-19
Electric Trolley HoistsWire-Rope 21-24Chain 25-27
www.jbarnsleycranes.com
Copyright J.Barnsley Cranes LTD, 2019. Reproduction, including extracts, only with written permission from the publisher. No liability assumed for errors.
4-5 4-5
MANUALManual Trolley Hoists
Low Headroom(Spark-Proof)
Hook-Suspension‘Chain’ Hoists and
Hand-Geared Trolleys
Ultra-Low Headroom(Spark-Proof)
MANUALHook Suspension Chain Hoists &Hand Geared Trolleys (YHSY)
Designed according to;BS EN 13157 Supply of Machinery (Safety) Regulations, • 1992 (S.I. 1992/3073) ATEX Directive 2014/34/EU•
Hoisting/Lowering | TravellingManually operated by endless pendant Brass hand chain•
EnvironmentHazardous Area Zone 1 & 2. IIA/IIB T3. ATEX•
Safety FeaturesOverload protection device• Stainless Steel Slack Chain Collector•
Load Chain Material-Grade ’T’ High Tensile steel• According to DIN EN 818-7 (ASTM A391/A391M-07)•
Spark-Resistant Materials:Brass | Hand Chains• Bronze | Trolley • Wheels,Load Chain Sprocket, Idler chain Rollers, Brake Ratchet Wheel, Brake Hub (8-Start Threaded Nut)Bronze Coated High-Tensile • Forged-Steel, Hook & Safety Catch
Anti-Corrosion Protection:Galvanised • Load-Chain, Cast-Steel Hand-Chain wheels, Hand-Chain Guide, Stay-Bars, Washers & Nuts
Stainless and galvanised • fasteners
Surface Treatment:3-Coat Epoxy Marine • Painting SystemType: OSPS-1• Shot blast to SA 2.5• Total DFT: 220 • Colour: 08E51 Golden • Yellow
Hook-Suspension Chain-Hoists & Hand-Geared Trolleys
SWL (Te) A(Min) B C D E F G FALLS EFFORT TO HOIST (kg)
VELOCITY RATE
WEIGHT (3m HOL)
(kg)
EXTRA PER METER
(over 3m HOL)(kg)
0.5 335 175 157 242 87 70 29 1 25 49:1 16 1.8
1 335 175 157 242 87 70 29 1 30 49:1 16 1.8
2 520 250 204 335 109 95 40 1 33 87:1 33 3.1
3 520 250 204 335 109 95 40 1 38 87:1 33 3.1
5 654 250 204 352 109 95 47 2 34 174:1 43 5.3
8 825 383 204 436 109 95 68 3 35 261:1 79 7.5
10 825 383 204 436 109 396 68 3 44 261:1 79 7.5
20 1010 555 250 501 125 1012 64 6 2 * 44 522:1 208 15
EXAMPLE TECHNICAL DRAWING & DATA
NOTE: ‘A’ dimension increases on low temparature models
Hook-Suspension Chain-Hoists & Hand-Geared Trolleys
SWL (Te) A(Min) B C D E F G FALLS EFFORT TO HOIST (kg)
VELOCITY RATE
WEIGHT (3m HOL)
(kg)
EXTRA PER METER
(over 3m HOL)(kg)
0.5 335 175 157 242 87 70 29 1 25 49:1 16 1.8
1 335 175 157 242 87 70 29 1 30 49:1 16 1.8
2 520 250 204 335 109 95 40 1 33 87:1 33 3.1
3 520 250 204 335 109 95 40 1 38 87:1 33 3.1
5 654 250 204 352 109 95 47 2 34 174:1 43 5.3
8 825 383 204 436 109 95 68 3 35 261:1 79 7.5
10 825 383 204 436 109 396 68 3 44 261:1 79 7.5
20 1010 555 250 501 125 1012 64 6 2 * 44 522:1 208 15
MANUALHand Geared Trolleys (HGT)
SWL(Te) A B C D E F G H J K L M N P WT (kg)
0.5 50 150 16 195 8 65 22 140 70 13 35 80 300 15 20
1 60 160 12 195 10 80 27 160 85 23 45 90 340 15 32
2 70 160 12 195 15 80 32 160 85 30 60 90 340 15 35
3 85 185 13 195 15 100 32 192 107 30 60 106 404 15 50
4 100 195 13 195 15 100 32 192 107 40 80 106 404 15 90
5 100 195 14 195 20 125 32 228 132 40 80 128 484 15 90
6 100 195 14 195 20 125 32 228 132 40 80 128 484 15 90
8 100 195 14 195 30 125 32 228 132 40 100 128 484 15 120
10 125 230 17 320 30 160 40 288 165 55 100 177 642 40 180
12 125 230 17 320 30 160 40 288 165 65 120 177 642 40 180
16 125 230 17 320 40 160 40 288 165 65 120 177 642 40 320
20 150 230 34 380 40 200 45 344 200 65 120 204 752 40 320
SWL (Te)
WEIGHT(3m HOL)
(kg)
EXTRA PER METER(over 3m HOL)
(kg)
EFFORT TO HOIST VELOCITY EFFORT TO
TRAVELVELOCITY
RATIOMINIMUM TRACK
RADIUS
0.5 37 2 25 49:1 5 3.7:1 900
1 37 2 30 49:1 7 3.7:1 900
2 88 4 33 87:1 10 4.3:1 1500
3 88 4 38 87:1 12 4.3:1 1500
5 142 6 34 174:1 15 5.0:1 2000
10 186 8 44 261:1 20 4.6:1 1800
20 565 16 2 *44 522:1 25 7.2:1 7500
Flange Widths available;SWL (Te) mm0.5 / 1 / 2 75 - 3053 / 4 90 - 3055 / 6 / 8 / 10 / 12 100 - 30516 / 20 125 - 305Note: Trolleys set to suit at factory. Please specify beam size with order.
MANUALLow-Headroom Spark-Proof (YCLHY)
SWL(Te) A B C D E F G H J K L M N P WT (kg)
0.5 50 150 16 195 8 65 22 140 70 13 35 80 300 15 20
1 60 160 12 195 10 80 27 160 85 23 45 90 340 15 32
2 70 160 12 195 15 80 32 160 85 30 60 90 340 15 35
3 85 185 13 195 15 100 32 192 107 30 60 106 404 15 50
4 100 195 13 195 15 100 32 192 107 40 80 106 404 15 90
5 100 195 14 195 20 125 32 228 132 40 80 128 484 15 90
6 100 195 14 195 20 125 32 228 132 40 80 128 484 15 90
8 100 195 14 195 30 125 32 228 132 40 100 128 484 15 120
10 125 230 17 320 30 160 40 288 165 55 100 177 642 40 180
12 125 230 17 320 30 160 40 288 165 65 120 177 642 40 180
16 125 230 17 320 40 160 40 288 165 65 120 177 642 40 320
20 150 230 34 380 40 200 45 344 200 65 120 204 752 40 320
SWL (Te)
WEIGHT(3m HOL)
(kg)
EXTRA PER METER(over 3m HOL)
(kg)
EFFORT TO HOIST VELOCITY EFFORT TO
TRAVELVELOCITY
RATIOMINIMUM TRACK
RADIUS
0.5 37 2 25 49:1 5 3.7:1 900
1 37 2 30 49:1 7 3.7:1 900
2 88 4 33 87:1 10 4.3:1 1500
3 88 4 38 87:1 12 4.3:1 1500
5 142 6 34 174:1 15 5.0:1 2000
10 186 8 44 261:1 20 4.6:1 1800
20 565 16 2 *44 522:1 25 7.2:1 7500
SWL (Te) A(Min) B C D E F G H J K L M FALLS
0.5 310 130 345 153 192 110 205 MAX 77 92 60 24 29 1
1 310 130 345 153 192 110 205 MAX 77 92 60 24 29 1
2 400 180 480 207 273 112 220 MAX 132 107 112 32 40 1
3 400 180 480 207 273 112 220 MAX 132 107 112 32 40 1
5 550 209 560 260 300 117 242 148 150 125 30 47 2
10 784 200 465 187 278 158 270 169 113 150 55 68 3
20 1400 344 752 376 376 146 380 240 295 200 45 64 6
SWL (Te)
Effortto Hoist (kg)
Hoisting Velocity
Ratio
Effort to travel (kg)
Travel VelocityRatio
Minimum Track Radius (mm) Falls Weight (kg)
3m HOL+/M
1 17 174 14 15:1 2500 2 85+5/M
2 19 174 16 15:1 2500 2 90+5/M
3 21 326 18 18:9 4000 2 140+7/M
4 23 326 20 18:9 4000 2 165+7/M
5 25 326 17 14:9 4500 2 195+7/M
6 25 653 19 14:9 4500 4 230+11/M
8 27 653 21 14:9 5000 4 190+11/M
10 29 653 23 17:8 6500 4 370+11/M
12 35 979 26 17:8 6500 6 445+16/M
16 45 1305 30 17:8 8000 8 625+2-/M
20 48 1305 35 14 8000 8 700+20/M
MANUALUltra-Low Headroom Spark-Proof (YLHY)
SWL (Te) A(Min) B C D E F G H J K L M FALLS
0.5 310 130 345 153 192 110 205 MAX 77 92 60 24 29 1
1 310 130 345 153 192 110 205 MAX 77 92 60 24 29 1
2 400 180 480 207 273 112 220 MAX 132 107 112 32 40 1
3 400 180 480 207 273 112 220 MAX 132 107 112 32 40 1
5 550 209 560 260 300 117 242 148 150 125 30 47 2
10 784 200 465 187 278 158 270 169 113 150 55 68 3
20 1400 344 752 376 376 146 380 240 295 200 45 64 6
SWL (Te)
Effortto Hoist (kg)
Hoisting Velocity
Ratio
Effort to travel (kg)
Travel VelocityRatio
Minimum Track Radius (mm) Falls Weight (kg)
3m HOL+/M
1 17 174 14 15:1 2500 2 85+5/M
2 19 174 16 15:1 2500 2 90+5/M
3 21 326 18 18:9 4000 2 140+7/M
4 23 326 20 18:9 4000 2 165+7/M
5 25 326 17 14:9 4500 2 195+7/M
6 25 653 19 14:9 4500 4 230+11/M
8 27 653 21 14:9 5000 4 190+11/M
10 29 653 23 17:8 6500 4 370+11/M
12 35 979 26 17:8 6500 6 445+16/M
16 45 1305 30 17:8 8000 8 625+2-/M
20 48 1305 35 14 8000 8 700+20/M
SWL (Te) A B C D E F G H J K L M N FALLS
1 155 100 80 570 320 100 150 260 310 200 150 25 100 1
2 190 100 80 570 320 100 150 260 310 200 150 25 100 1
3 220 123 100 780 510 130 140 365 415 250 170 35 100 1
4 240 123 100 780 510 130 140 365 415 250 170 35 100 1
5 280 153 125 815 510 165 140 400 415 260 170 35 100 1
6 305 153 125 815 490 165 160 410 405 260 180 35 100 2
8 345 153 125 880 530 210 140 475 405 260 180 35 100 2
10 370 192 160 900 530 195 175 460 440 270 190 35 100 2
12 390 192 160 905 480 210 215 440 465 290 220 35 100 3
16 500 192 160 1105 670 235 200 570 535 300 230 35 100 4
20 530 240 200 1105 670 235 200 570 535 350 240 35 100 4
PNEUMATICPNEUMATICPneumatic Trolley Hoists
Standard Headroom Low Headroom
Ultra-Low Headroom Rack & Pinion
SWL (Te) A B C D E F G H J K L M N FALLS
1 155 100 80 570 320 100 150 260 310 200 150 25 100 1
2 190 100 80 570 320 100 150 260 310 200 150 25 100 1
3 220 123 100 780 510 130 140 365 415 250 170 35 100 1
4 240 123 100 780 510 130 140 365 415 250 170 35 100 1
5 280 153 125 815 510 165 140 400 415 260 170 35 100 1
6 305 153 125 815 490 165 160 410 405 260 180 35 100 2
8 345 153 125 880 530 210 140 475 405 260 180 35 100 2
10 370 192 160 900 530 195 175 460 440 270 190 35 100 2
12 390 192 160 905 480 210 215 440 465 290 220 35 100 3
16 500 192 160 1105 670 235 200 570 535 300 230 35 100 4
20 530 240 200 1105 670 235 200 570 535 350 240 35 100 4
PNEUMATICPNEUMATICStandard Headroom
SWL(Te) MODEL FALLS
AIR FLOW (L/sec)
FULL LOAD LIFTING SPEED
(m/min)
MINIMUM HOSE DIA (I/D)
(inches)
0.25 TCR-250 1 13 15 9.3 0.5
0.25/0.5 TCR-500 1 25 27 12/10.5 0.5
0.5 TCR-500/2 2 13 15 4.6 0.5
0.5 TCS-500 1 28 33 17 0.5
0.98 TCS-980 2 28 33 8.5 0.5
1 TCR 1000/2 2 25 27 5.3 0.5
1 TCR-1000 1 25 28 6 0.5
2 TCR-2000/2 22 25 30 3 0.5
3 TCR-3000 1 33 43 2.8 0.75
6 TCR-6000/2 2 33 43 1.4 0.75
9 TCR-9000 3 33 43 0.9 0.75
10 TNC 10TW LFE 2 90 100 1.5 1
12 TCR-12000/4 4 33 43 0.6 0.75
15 TCR-15000/5 5 33 43 0.5 0.75
15 TNC 15TW/3 3 90 100 1 1
20 TNC 20TW/4 4 90 100 0.75 1
25 TNC 25TW LPE 2 90 100 0.6 1
37.5 TNC 37.5TW/3 3 90 100 0.35 1
50 TNC 50TW/4 4 90 100 0.3 1
J.Barnsley pneumatic hoists have safe working loads ranging from 250kg to 50 tonne and con-form with the EC Machinery Directive and the European Standard for hoists BS EN 14492-2.
The TCR, TCS and TNC series of pneumatic hoists offers a comprehensive range of hoists suited to all types of industrial and marine environments. For use in areas where there is a risk of explosion due to flammable gases or dust, we can offer a range of ATEX classifications to suit your requirements.
As standard, our hoists are able to work within a temperature range of -10°C to +70°C, with some slight modifications we can make the hoists suitable to be used at -20°C.
TOKU high quality vane motor and epicycle gearbox with long life grease• Overload protection• High strength cast steel housing for durability• Compact and lightweight for easy handling• Extended duty cycles and frequent reversals• Variable speed for raising and lowering accurately• Alloy steel hooks with safety catches (Bottom hook fitted with thrust bearing for easy • operation)Automatic adjustable load limiter capacities (Not for TMM, TCR Mini or TCS)• Failsafe automatic disk brake (fully enclosed) ensures the load cannot fall if power is lost• Emergency stop• Mechanical upper and lower hoist limits• Lifting heights to meet your needs• Choice of cord, pendant control or control systems• Low noise level down to 80 dB (Silencer and filter easily changed)• Low air consumption (TCR model)• Air pressure from 4.5 to 6 Bar (7 Bar maximum)• Durable in harsh environments• Self cooling air motor with the exhaust over the motor• Low maintenance• Easily available spares at a realistic price• Hoist body manufactured in Japan, all other parts in Europe• High quality calibrated load chain of European/Japanese manufacture with 5:1 FOS• High speed (TCS model)• Special designs of hoists and trolleys• Ex classification to EC directive 94/9/EC (ATEX models)• Various paint specifications and colours•
DESIGN FEATURES
PNEUMATICPNEUMATICAVAILABLE OPTIONS
Marine specification• Collision bumpers•
ATEX specification ZONE 1 & 2• Articulated trolleys• Rack & pinion drive•
Travel limits• Air Service units• Festoon systems•
Radio control remote• Main air shut off valve• Special paint systems•
Beam brake• Other travel speeds•
Low Headroom
MODEL TCR-500-LHR
TCR-1000/2-LHR
TCR-1000-LHR
TCR-2000-LHR
TCR-3000-LHR
TCR-6000-LHR
TCR-12000-LHR
SWL (Te) 0.5 1 1 2 3 6 12
Chain Falls 1 2 1 2 1 2 4
Lifting Speed Full Load (m/min) 10.5 5.3 6 3 2.8 1.4 0.6Lifting Speed
without Full Load (m/min) 16 9.5 11.3 5.7 5.7 2.9 1.4
Lowering Speed Full Load(m/min) 17.9 9 10.3 5.2 4.6 2.3 1.1
Travel Speed (m/min) 9 9 9 9 6 6 8
Hoist Air Consumption (L/sec) 25 25 25 25 33 33 33
Travel Air Consumption(L/sec) 25 25 25 25 25 25 50
Inlet Connection (Inches) 0.5 0.5 0.5 0.5 0.75 0.75 1
Weight with 3M HOL (kg) 85 90 90 105 295 310 400
Additional Metre HOL (kg) 0.8 1.6 1.1 2.2 2.7 5.4 10.8
Flange Min. (mm) 60 60 60 60 110 110 110
Flange Max. (mm) 300 300 300 300 300 300 300
MODEL TCR-500-LHR
TCR-1000/2-LHR
TCR-1000-LHR
TCR-2000-LHR
TCR-3000-LHR
TCR-6000-LHR
TCR-12000-LHR
SWL (Te) 0.5 1 1 2 3 6 12
Chain Falls 1 2 1 2 1 2 4
Lifting Speed Full Load (m/min) 10.5 5.3 6 3 2.8 1.4 0.6Lifting Speed
without Full Load (m/min) 16 9.5 11.3 5.7 5.7 2.9 1.4
Lowering Speed Full Load(m/min) 17.9 9 10.3 5.2 4.6 2.3 1.1
Travel Speed (m/min) 9 9 9 9 6 6 8
Hoist Air Consumption (L/sec) 25 25 25 25 33 33 33
Travel Air Consumption(L/sec) 25 25 25 25 25 25 50
Inlet Connection (Inches) 0.5 0.5 0.5 0.5 0.75 0.75 1
Weight with 3M HOL (kg) 85 90 90 105 295 310 400
Additional Metre HOL (kg) 0.8 1.6 1.1 2.2 2.7 5.4 10.8
Flange Min. (mm) 60 60 60 60 110 110 110
Flange Max. (mm) 300 300 300 300 300 300 300
MODEL A B C D E F G HØ I J K
TCR-500-LHR 570 520 115 340 21 TBC 135 70 30 480 590
TCR-1000/2-LHR 570 520 115 340 21 TBC 135 70 30 480 590
TCR-1000-LHR 570 520 115 340 21 TBC 135 70 30 480 590
TCR-2000-LHR 570 520 115 340 21 TBC 135 70 30 480 590
TCR-3000-LHR 880 830 132.5 565 33 TBC 115 150 35 675 790
TCR-6000-LHR 880 830 132.5 565 33 TBC 115 150 35 675 790
TCR-12000-LHR 1050 1000 132.5 735 33 TBC 185 150 50 635 810
- L M N O P Q R Ø S T U
TCR-500-LHR 340 180 25 20 295 30 40 186 156 30
TCR-1000/2-LHR 375 135 25 42 320 30 40 186 156 30
TCR-1000-LHR 340 180 25 20 296 29 40 177 157 30
TCR-2000-LHR 390 125 30 53 320 28 40 175 160 40
TCR-3000-LHR 400 215 37 38.5 480 37 50 202 230 47
TCR-6000-LHR 495 138 37 72 525 43 62 202 230 49
TCR-12000-LHR 600 95 52 200 605 58 84 202 230 67
PNEUMATICAVAILABLE OPTIONS
Marine specification• Collision bumpers•
ATEX specification ZONE 1 & 2• Articulated trolleys• Rack & pinion drive•
Travel limits• Air Service units• Festoon systems•
Radio control remote• Main air shut off valve• Special paint systems•
Beam brake• Other travel speeds•
Ultra-Low Headroom
MODEL TCR-6000-ULHR TCR-12000-ULHR TCR-20000-ULHR
SWL (Te) 6 12 20
Chain Falls 2 4 4
Lifting Speed Full Load (m/Min) 1.4 0.6 0.75
Lifting Speed Without Full Load (m/Min) 2.9 1.4 1.25
Lowering Speed Full Load (m/Min) 2.3 1.1 1.15
Travel Speed (m/Min) 9 6 6
Hoist Air Consumption (L/sec) 33 33 90
Trolley Air Consumption (L/sec) 25 50 50
Inlet Connection (inches) 0.75 1 1
Weight with 3M HOL (kg) 380 480 1440
Additional Metre HOL (kg) 5.4 10.8 22.8
Flange Min. (mm) 170 215 220
Flange Max. (mm) 300 300 305
MODEL A B C D E F G H I JØ K
TCR-6000-ULHR 1115 1065 132.5 535 128 108 TBC 150 160 150 50
TCR-12000-ULHR 1200 1150 132.5 620 128 103 TBC 220 90 150 50
TCR-20000-ULHR 1620 1570 200 890 185 158 TBC 265 145 225 50
- L M N O P Q R S T Ø U
TCR-6000-ULHR 530 645 355 347.5 107.5 37 500 43 62 49
TCR-12000-ULHR 530 645 400 367.5 130 52 540 58 84 67
TCR-20000-ULHR 780 950 500 550 165 64 915 78 110 80
MODEL TCR-6000-ULHR TCR-12000-ULHR TCR-20000-ULHR
SWL (Te) 6 12 20
Chain Falls 2 4 4
Lifting Speed Full Load (m/Min) 1.4 0.6 0.75
Lifting Speed Without Full Load (m/Min) 2.9 1.4 1.25
Lowering Speed Full Load (m/Min) 2.3 1.1 1.15
Travel Speed (m/Min) 9 6 6
Hoist Air Consumption (L/sec) 33 33 90
Trolley Air Consumption (L/sec) 25 50 50
Inlet Connection (inches) 0.75 1 1
Weight with 3M HOL (kg) 380 480 1440
Additional Metre HOL (kg) 5.4 10.8 22.8
Flange Min. (mm) 170 215 220
Flange Max. (mm) 300 300 305
PNEUMATICOur pneumatic rack and pinion trolleys have been
developed with high efficiency gearboxes with a rack and pinion drive mechanism to drive the trolley and hold in the required position for use on vessels or floating installations. We can supply trolleys with capacities from 500 kg to 25 tonne to suit various beam and rack modules for monorail trolley hoists and overhead travelling cranes.
The trolleys can either be geared or air driven with operating speeds to match our standard trolleys and can be fitted on to our low headroom, ultra-low headroom or BOP trolleys.
SAFE WORKING LOAD - 0.5Te to 25Te
AVAILABLE OPTIONSVarious speeds available• Offshore version with corrosion protection• Special paint systems• Available on low headroom and ultra-low • headroom trolleysSpecial designs• Travel limits• Explosion proof ATEX ZONE 1 or 2• Temperature range -20°C to +70°C (-10°C to • +70°C as standard)
Rack & Pinion
MODEL A B C D E F G H I JAT2S-RP 21 TBC 115 70 30 460 410 175 174 495/530
AT2S-RP 21 TBC 115 70 30 460 410 175 174 555
AT3S-RP 25 TBC 115 100 30 485 435 185 180 645
AT6S-RP 28 TBC 115 150 30 600 550 250 180 765
AT10S-RP 33 TBC 115 150 30 600 550 250 180 765
AT15S-RP 40 TBC 185 150 50 690 640 260 280 1190
AT20S-RP 53 TBC 215 240 55 1020 970 400 340 1250
AT25S-RP 53 TBC 215 240 55 1020 970 400 340 1400
- K L M N O P Q R S1 S2
AT2S-RP 29 40 186 156 29.5 25 20 113 139 32
AT2S-RP 29 45 185 155 37 30 54 140 139 32
AT3S-RP 34 50 240 200 45 35 31 135 139 32
AT6S-RP 42 65 250 200 49 42 72 180 139 32
AT10S-RP 40 60 310 250 62 55 107 255 177 22
AT15S-RP 58 84 310 250 67 52 197 465 177 30
AT20S-RP 78 110 315 245 80 64 265 535 177 35
AT25S-RP 80 125 345 365 103 82 165 315 177 35
MODEL CAPACITY(Te)
TRAVELSPEED (m/min)
AIR FLOW(l/sec)
AIRPRESSURE
FLANGERANGE
HOSE I/DTROLLEY (inches)
AT2S-RP 0.5 + 1 6 25 6 80-300 0.5AT2S-RP 2 6 25 6 80-300 0.5AT3S-RP 3 6 25 6 120-300 0.5AT6S-RP 6 6 25 6 130-300 0.5
AT10S-RP 10 6 40 6 150-300 0.75AT15S-RP 15 6 40 6 150-300 0.75AT20S-RP 20 4 80 6 150-300 0.75AT25S-RP 25 4 80 6 150-300 0.75
MODEL A B C D E F G H I JAT2S-RP 21 TBC 115 70 30 460 410 175 174 495/530
AT2S-RP 21 TBC 115 70 30 460 410 175 174 555
AT3S-RP 25 TBC 115 100 30 485 435 185 180 645
AT6S-RP 28 TBC 115 150 30 600 550 250 180 765
AT10S-RP 33 TBC 115 150 30 600 550 250 180 765
AT15S-RP 40 TBC 185 150 50 690 640 260 280 1190
AT20S-RP 53 TBC 215 240 55 1020 970 400 340 1250
AT25S-RP 53 TBC 215 240 55 1020 970 400 340 1400
- K L M N O P Q R S1 S2
AT2S-RP 29 40 186 156 29.5 25 20 113 139 32
AT2S-RP 29 45 185 155 37 30 54 140 139 32
AT3S-RP 34 50 240 200 45 35 31 135 139 32
AT6S-RP 42 65 250 200 49 42 72 180 139 32
AT10S-RP 40 60 310 250 62 55 107 255 177 22
AT15S-RP 58 84 310 250 67 52 197 465 177 30
AT20S-RP 78 110 315 245 80 64 265 535 177 35
AT25S-RP 80 125 345 365 103 82 165 315 177 35
ELECTRIC
Short Headroom
ELECTRIC Trolley Hoists
Standard Headroom ArticulatedStandard Headroom
Standard, Low and Ultra-Low Headroom Articulated Trolleys
Wire Rope Hoists
Chain Hoists
ELECTRIC
J.Barnsley Cranes has been supplying the SH Wire Rope Hoist Model into the Oil & Gas, Phar-maceutical, Chemical, Nuclear and Automotive Industries for over 25 years. The SH wire rope hoist programme has been the embodiment of perfection in lifting and crane technology all over the world for many years.
As a market leader in the explosion proof crane industry we appreciate the modular system based on field proven, low maintenance components.
Series manufacture of the standard components means economic advantages for the client. This combined with precise manufacture of off-standard components makes the SH wire rope hoist a widely acknowledged top quality product.
The SH Monorail series is available for the load capacity range 500-25000 Kg in five frame sizes with 26 load capacity variants.
Various off-standard designs are available for use in particular conditions. IP66 protection for ex-ample is required for outdoor use when the hoist can be exposed to the harsh environment. Space heaters can be added if there is a danger of formation of condensation or in arctic temperatures.
Facts5 frame sizes, 26 load capacity • varientsStationary design or different trollies • and crabs for cranes and system manufactureCompact Design• Largely Maintenance Free, Low-wear • service lifeEquipped as standard with 2 hoisting • and travel speedsParticularly smooth starting and • braking characteristicsStandard high quality safety • components
Wire-Rope Trolley Hoists
The SH EX wire-rope hoist is available for gas explosion protection Zone 1 and Zone 2 and dust explosion protection Zone 21 & 22. It meets the technical, normative and practical requirements specified by ATEX and IECEx.
USE CATEGORY PROTECTION AGAINST EXPLOSION PROTECTION CLASS
Zone 1 Ex II 2 G Gas Ex de IIB T4 or Ex de IIC T4Zone 2 Ex II 3 G Gas Ex de nA IIB T3 (T4) or Ex de nA IIC (T4)
Zone 21 Ex II 2 D Dust Ex tD A21 IP 66 T 120degCZone 22 Ex II 3 D Dust Ex tD A22 IP 66 T 120degC
AVAILABLE ON REQUEST
• Various configurations (including Low
Headroom and Articulated Trolleys
Various lifting speeds & lift heights•
Greater lifting capacities•
Electric Trolley Hoists | Wire Rope | Short Headroom
SWL(Te) MODEL
LIFTING HEIGHTAvailable on Drum
(m)
LIFTING SPEED(m/min) HEADROOM
(mm)APPROX. WEIGHT
(kg)FAST SLOW
1 SH 3005-25 2/1 20 12.5 2 470 280
1.6 SH 3008-20 2/1 20 10 1.6 470 280
2 SH 4010-25 2/1 30 12.5 2 580 332
3.2 SH 4016-16 2/1 30 8 1.3 620 357
5 SH 5025-32 2/1 40 16 2.6 600 970
8 SH 5020-40 4/1 20 10 1.6 600 990
10 SH 6050-16 2/1 60 8 1.3 930 2100
12.5 SH 6063-20 2/1 60 6.3 1 930 2200
16 SH 6040-20 4/1 30 5 0.8 980 3140
Extensive range with lifting capacities from 125kg to • 6,300kgPatented suspension directly on chain guide• Equipped with two hoisting speeds as standard• Extremely short and compact construction ensures that • space can be utilised to the maximum
High standard classification in accordance with FEM• Modern Kanban production, available fast• Available as an option in explosion-protected design • ATEX and IECEx Compliance•
Chain Trolley HoistsELECTRIC
J.Barnsley Cranes have been supplying the ST chain hoist model into the Oil & Gas, Pharmaceutical, Chemical, Nuclear and Automotive Industries for over 25 years. The ST chain hoist programme continues to be the embodiment of perfection in lifting and crane technology all over the world;ranking amongst the most distinctive and comprehensive range of chain hoists on the market.
ST chain hoists are suitable for Safe and Hazardous Area Zones 1, 21 & 22 (note: The ST hoist was the first on the market to convert to ATEX)
Our extensive range of chain hoists are available in 13 SWL ranges; from 125 kgs to 6,300 kgs. The hoist can be designed with ‘Standard’, ‘Short’ and ‘Ultra-Low’ Headroom Trolleys along with articulated trolleys for curved beams with tight radii.
Chain hoists are used on our ‘Bridge’, ‘Goliath’ and ‘Jib’ Cranes and are also used on numerous monorail applications around the world.
Suitable for Safe Areas and • Hazardous Areas - Zone 1 & 2
AVAILABLE ON REQUEST
• Various configurations (including Low
Headroom and Articulated Trolleys
Various lifting speeds & lift heights•
Greater lifting capacities•
Electric Trolley Hoists | Chain | Short Headroom
SWL(Te) MODEL LIFTING HEIGHT
Maximum (m)
LIFTING SPEED(m/min) HEADROOM
(mm)WEIGHT(3m HOL)
FAST SLOW
0.5 ST 1005-8/2 1/1 60 8 2 242 61
1 ST 2010-8/2 1/1 40 8 2 311 104
1.6 ST 3016-8/2 1/1 30 8 2 352 109
2 ST 2010-8/2 2/1 20 4 1 390 112
3.2 ST 3216 12/3 2/1 40 6 1.5 475 184
5 ST 5025-6/1 2/1 25 3.2 0.75 524 197
6.3 ST 6032-6/1 2/1 25 3.2 0.75 600 207
J.Barnsley Cranes LtdInternational Specialist for Explosion Protection Technology
One of the most extensive chain hoist ranges for Zone 1, Zone •
2, Zone 21 and Zone 22 worldwide
Certification available in accordance with ATEX, IECEx, CSA, •
CuTr and NEC/UL codes.
Tel: +44 (0) 1384 484811 Fax: +44 (0) 1384 484333
Email: sales@jbarnsleycranes.com