Turbo Separator front2 - Scott Equipment · Turbo Separator Versatility • Interchangeable screens...

Post on 06-Jun-2018

217 views 0 download

transcript

Turbo Separator

B A C

E

F

D

H

COLLECTIONHOPPER

RECLAIMEDPRODUCT

WASTEDISCHARGE

HINGED ACCESS DOORS

SCREEN AREA

For more information, please contact us:605 4th Avenue NW, New Prague MN 56071Phone: (800) 394-2591 (952) 758-2591 605 4th Avenue Northwest • New Prague, Minnesota 56071 • (800) 394-2591 • www.scottequipment.com

The Scott Turbo Separator was developed to remove products from their packaging, allowing for disposal or recycling. Through a combination of centrifugal forces, self-generated air flow and mechanical action, up to 99% of dry or liquid materials can be removed from their packaging.

Product/Package Recycling

Anaerobic Digestion

Separation for Waste-to-Energy

Product Destruction

Composting

Organics Recovery

Turbo Separator Specifications and Measurements - Inches (cm)

Model Body Size A B C D E F G H

2096 20x96 96 20 12 14 15 26 40 18

3096 30x96 96 20 14 18 20 32 50 24

42120 42x120 120 21 15 24 26 38 60 24

Fax: (952) 758-4377E-mail: Sales@ScottEquipment.comOr visit our website at www.scottequipment.com

When compared with other methods of separation, the Turbo Separator achieves higher separation efficiencies with lower power consumption which results in reduced operating costs.

The Turbo Separator is also ideal for separating out of specification, out of date and mislabeled products from a variety of packaging including cans, plastic bottles and boxes.

NOTE: Dimensions are for reference only

Support stand and collection hopper built to customer specifications

Screens are removable

D

H

G

Turbo Separator Versatility • Interchangeable screens

• Adjustable paddle configurations

• Custom designed for various processing applications

• Liquid Spray Systems

• Optional Collection & Discharge Hoppers

• 304, 316L Stainless Steel, or Carbon Steel

Scott Turbo Separator SystemThe Scott Turbo Separator includes a variable-speed shaft which is fitted with paddles, and the shaft rotates above the screen area. The screens are available in a number of different sizes and designs.

Various types of paddles are available, each designed to perform a specific function. One type generates air flow, others are more efficient at opening particular types of packaging with further designs used to convey or retain material within the separation chamber.

The Turbo Separator shaft typically runs between 100 RPM to 1,000 RPM, generating airflow as well as providing the mechanical forces required for packaging separation.

The material to be separated enters the separation chamber and comes into contact with the primary paddles which open the packaging. Paddles and screens are configured so that maximum separation is achieved with minimum damage to the packaging.

before after

ApplicationsCanned GoodsCartonsCereal BoxesDry SacksGrocery Store WasteLoose Products

Organic WastePlastic BottlesPlastic PotsRestaurant WasteSheet RockSSO’s

Waste Packaging Conveyor

Organics Conveyor

Infeed ConveyorFeed Hopper

Organics Pump

Turbo Separator