Post on 22-Mar-2018
transcript
About us
With over 15 years’ experience in the research, design and manufacture of transformers and reactors, Fdueg is now a leading company in the field of electromechanics.
The company is situated near the border between the two provinces of Novara and Vercelli and it extends for 3000 square meters as part of a 18000 square metre property.
In the long run Fdueg has earned a reputation for highly efficient solutions in the design and making of particular products in all the application fields, from power electronics, to distribution, energy generation, offshore plants and alternative energy production.
Our close cooperation with our customers has allowed us to meet their requirements all over the world.
Ongoing staff training and investment in research guarantee that our customers will always find in Fdueg an extremely competent and competitive partner.
History
Fdueg was founded in 1995 thanks to the partners’ established experience in electromechanics. Ever since its foundation the company has found a niche in various sectors where machines for particular applications that require highly competent design are needed. In the long run it has built lasting relationship with some manufactures of power electronics and has developed competitive solutions in the field of transformers and reactors in series. In the last few years Fdueg has strengthened its position with special applications by employing well-qualified engineers and training staff in new production methods so as to guarantee the greatest competitiveness both for special products and mass produced ones. Our competitiveness is based in the constant improvement of technological processes. Our mission is to match our customers’ requirements to the most update design and manufacturing techniques to offer the best possible product.
People
We believe our staff; they are our most valuable asset. Our attitude spurs us to invest in non-stop training to excel in each professional field. Every day is a new challenge, but we do not feel put off by the complexity of the solutions we have to come up with. Challenges appeal to us and lead us to do our best in each situation, because we are aware that our efforts will have positive results for our customers and the community, too. We spur our staff to their utmost to improve Fdueg because they are Fdueg. Our activity involves listening to and trying to understand our customers in order to meet their requirements and turn them into the best engineering solutions.
Our MISSION is to match our customers’ needs to the most up-to-date design and manufacturing technology to guarantee the best technical product by developing a flexible entrepreneurial activity based on an efficient use of resources coupled with top-quality research and competitive products and services that are respectful of people and the environment.
The valves that encourage us, support our decisions and actions are:
QUALITY, that is the improvement of all our activities in order to satisfy the whole community that revolves around the company (customers, staff, suppliers).
EFFICACY, each and single action is geared to achieve a well-defined result in live with our objectives.
CUSTOMER SATISFACTION and guidance allow us to fully understand and foresee any needs to fulfil objectives jointly.
ONESTY and INTEGRITY are at the basis of our business mission.
LEADERSHIP, all our efforts are aimed to improve our performance so as to become a point of reference and a model for anyone; our efforts are addressed towards ambitious goals in all the sectors we are involved in.
INNOVATION it is our outmost care to offer our customers more and more innovative products and to be an integral part of them.
TEAM WORK, we value and promote team work by asking our staff to take an active part in the attainment of our goals.
Production
Fdueg has always focussed on customers’ requirements and, in the long run, we have come to realize that our trump card has been our ability to customize products to meet customers’ needs: Fdueg has always built up close relationships with customers in order to offer and guarantee the best possible product, service and solution.
By targeting the sector of special/particular solutions, Fdueg has risen above its main competitions in the electrotechnical field: our high competence in design and manufacture has allowed us to study and make lots of unique items perfectly meeting customers’ needs. The fact that such products are not often mass-produced underlines that, the product itself, which can be seen as a prototype, must meet certain requirements from the very beginning, and here again Fdueg has always been able to do the best. Fdueg has developed its own design software and it also makes use of solution systems for finished components in order to validate calculations and projects. The application fields in which the most particular fittings have been developed are: offshore applications, test labs, alternative energy production, conversion and rectification, metallizing and plating plants.
DRY TYPE
Up to 5MVA
Up to 36 kV
CAST RESIN
Up to 5MVA
Up to 36 kV
WATER COOLING
Up to 50 kA
Up to 36 kV
OIL IMMERSED
Up to 12MVA
Up to 36 kV
Production
Dry type
Dry type transformers and reactors represent one of Fdueg’s strong point; thanks to a wide database, which has been upgraded in the long run, and to our designers’ experience, we are in a position to develop each machine for it to respond to specific installation requirements, in a range between a few tens of VA and thousands of KVA, in low or medium voltage, with both copper and aluminum windings, trying to optimize costs and size in the development of these products, which are already advantageous as result of maintenance reduction, great attention has been paid to performance, with a thorough assessment of losses and cooling systems.
Dry type transformer for circuit breaker test 120 kVA - 350/20V - 6070A - 50 Hz - AN - 650 kg
Three-phase transformer 1000 kVA – 400/500 V 50Hz - AN – 2600kg
Neutral-earthing transformer Lightning impulse withstand voltage 125 kV - 25 kVA - 20000/400 V - Overload at 108 kVA for 60 sec. - AN - 300 kg
Interbridge reactor Output overload at 5 kA for 2 hours - 0.312 mH - 3300 A - 300 Hz - AN - 300 kg
Three-phase transformer 37,5 kVA – 416/216 V
400Hz - AF – 100kg
Dry type
Three-phase transformer 2000 kVA – 15000/407-408 V 50 Hz – AN – 4900kg
Choke integrated three-phase transformer 510 kVA – 246/217 V 50 Hz – AN – 1900kg
Transformer with box IP23 300 kVA – 220/440 V
50 Hz – AN – 935 kg
Shunt reactor withstand voltage 20 kV 60-51-42 mH - 249 A - 50 Hz - AN - 2000 kg
Short-circuit current limiting reactor 1.2 mH - 1600 A on 15kV line - 50 Hz - AN - 850 kg
Cast resin
Cast resin transformer 630kVA - 15000/400V - 50Hz - AN - 1850kg
Cast resin transformer 500kVA - 20000/400V - 50Hz - AN - 1600kg
Cast resin transformers can meet special insulation and environmental needs and be installed even in polluted or damp places. This type of product is easy to maintain and it makes plant management easier by eliminating any problems related to fine hazards. During the design stage our technicians assess carefully losses and cooling systems such as natural or forced ventilation, to obtain the beat cost-quality ratio.
Cast resin smoothing reactor 3,6 mH – 3000A – DC – AN - 3260kg
Water cooled
Cast resin smoothing reactor 4,9 mH – 1900A – DC – ANWF - 2225kg
If there are reactors which exhibit very high current (from a few hundreds to a few thousands of amperes) or in which the winding is extremely compact and does not allow the circulation of natural or forced air to cool the system, Fdueg offers a wide range of devices cooled by the water which flows inside the hollow conductor; detailed studies have been carried out on load losses in relation to the shape of the coils to optimize dissipative phenomena.
Air core reactor 0,267 mH – 150A – 550Hz - ANWF - 44kg
Smoothing reactor 3 mH – 2000A – DC – ANWF - 2500kg
Smoothing reactor 1,9 mH – 1200A – DC - ANWF - 1080kg
Oil immersed
For very high power (MVA) and voltage, we recommend oil immersed transformers. This solution guarantees the best possible resistance to dielectric stresses and, by using special heat exchangers, the elimination of losses, which allows the machine to cool. This type of product is particularly suitable for energy distribution networks or installations subject to severe weather or environmental conditions. In new of the specificity of the applications, each product is customized to determine the characteristics that can best satisfy the customer’s needs.
Three-phase transformer 1250 kVA – 15/0,4 kV – Dyn11
50Hz - ONAN – 2900kg
Three-phase transformer 250 kVA – 15/0,4 kV – Dyn11 50Hz - ONAN – 1000kg
Special products
Thanks to our designers’ wide experience and flexibility, not only does Fdueg make transformers and reactors, but it also deals with the development of all the accessories related to this core business, cooperation with customers to understand their needs and offer the best solutions is an essential prerequisite for the design and manufacture process. These conditions have made it possible for Fdueg to develop specific applications in test labs. Such projects are seen as a challenge that broadens and upgrades the store of knowledge and competence that represents the strong point of our company.
Portable equipment for making measurements of earth resistance, step voltage and contact voltage. 2.5 KVA power, 220 V output adjustable from 0 to 500 V with phase inverter and overcurrent protection
Welding machine
power factor correction bank, up to 200A 850µF
Voltage combiner for capacitor banks
Industry applications - UPS
Products belonging to continuity groups usually work at low voltage. Transformers and reactors are dimensioned keeping into account customers’ special needs to obtain the modulation of output current which is the most suitable for the circuit in which UPS have to be fitted. An efficient design solutions is to build the transformer and reactance as a single component, thus decreasing weight and size. Generally speaking, excellent performance and top-quality standards are required.
Choke integrated three-phase transformer 680 kVA – 246/217 V – Dzn0 50Hz - AN – 2200kg
Choke integrated three-phase transformer
150 kVA – 220/445 V – Dzn0 - 50Hz - AN – 450kg
HF reactor 0,25 mH – 120 A 50Hz - AF – 12kg
Filter reactor 0,09 mH – 700 A - 50Hz -
AN – 392 kg
Industry applications
The problems of plants in which the current that starts up the motor might damage some electrical components, is solved by inserting a motor starting reactor that must be dimensioned keeping into account the specific characteristics of the motor and the parameters of the plant. Current limiting reactors are also adopted to protect plant components, such as switches, from damage caused by short circuit overcurrents; in each single case the product must be designed according to specifications supplied by the customer.
Pump station
Short-circuit current limiting reactors 1,2 mH – 1600 A a 15000V
50Hz – AN – 850 kg
Short circuit air core reactor for 15 kV line
16 mH - 218 A - 1180 A short circuit current - 50 Hz - AN - 900 kg
Motor starting transformer Possibility of operating from 2 Hz to 233Hz 100 kVA - 2000/350V - AN - 4700 kg
Industry applications
In many cases, this type of application envisages the passage from medium to low tension and vice versa, for both safety reasons and the productive cycle; great attention is paid to insulation problems (insulating materials and insulating distances). A very special sector our company has been dealing with is the manufacture of rectifier bridges. Our product are designed to restrain the quality materials to stand difficult environmental conditions.
Heavy and chemical industry
Choke integrated transformer for 24-pulse rectifier 600 kVA – 220/430 V – Dz±15° 50Hz - AN – 1600kg
Transformer for rectifier with box IP21 1000 kVA – 400/480/480 V – Dd0yn11
50Hz - AN – 3200kg
Dry type transformer with on load tap changer Six secondary windings - 2700kVA
11000/from 204 to 725 V - Yd1 - 50Hz - AF - 5800kg
Industry applications
In induction furnaces the fusion of the material is obtained by joule effect, due to the induced current that runs through a conductor immersed in a varying electric field generated by one more windings carrying current. The features of such plants are extremely variable depending on their work load, capacity, cooling system and presence or absence of a core; in this field Fdueg has developed special expertise in the design of smoothing reactance, where high currents and the insertion of tapping to control the inductive value are extremely important. Each application needs to be customized to meet the customer’s needs.
Induction furnace
Smoothing reactor 3,6 mH – 3000A – DC – ANWF - 3260kg
Ripple sovrapposto di 300 A a 170 Hz
Smoothing reactor 1,2 mH – 2200A – DC – ANWF – 1095kg
Industry applications
The products made for test labs must meet specific requirements in terms reliability and precision to guarantee the validity of the results obtained. Transformers and reactors for this type of application must adapt to numerous test condition and be designed with several switches to obtain variable transformation ratios with restrictive tolerance limits.
Testing lab
Test lab reactor for short circuit test 1.5 mH - 15 kA for 0.5 sec every 10 minutes - 50 Hz - AN - 850 kg
Transformer for electric cables test 100kVA - 400/50-25-12.5V - 8000A max - 50Hz - AN - 550kg
Transformer for circuit breakers test 2 kVA - 440/1.2V - 1670A - 50Hz - AN - 60kg
Transformer for short circuit test with 15 kA 23000/231-420-438-463-527-725V
50Hz - AN - 2550kg
Offshore applications
In the field of offshore applications, the design of transformers and reactors is characterized by high power; besides taking into account all the adjustment options to suit the needs of the plant, these products must be developed keeping an eye on their remarkable mechanical and electric stressed as well as unfavourable environment conditions (dampness and salinity); they come with enclosure protection boxes with an air treatment system. Possible inefficiency would cause serious economic repercussions and therefore high reliability in required.
Shunt reactor withstand voltage 20 kV 60-51-42 mH - 249 A - 50 Hz - AN - 2000 kg
Shunt reactor withstand voltage 70 kV 305-265-215 mH - 320 A - 50 Hz - AN - 11500 kg
Power plant
Traditional plants for the production of energy generally need components suitable for high power as well as continuous and constant working conditions; transformers used in such applications are designed to increase or decrease the voltage depending on the characteristics of the line; the design of this kind of product requires a careful assessment of losses to guarantee the best possible performance.
Three-phase transformer with box IP21 400 kVA – 400/420 V – Dyn11 50Hz - AN – 1600kg
Three-phase transformer 962,5 kVA – 220/409 V – Yyn0
50Hz - AN – 2506kg
Three-phase transformer 250 kVA – 10400/400 V – Dyn5
50Hz - AN – 1300kg
Renewable energy
In new concept plants (solar, wind), transformers and reactors are mainly used for AC/DC conversion. The components of these applications must be developed with a view to their discontinuous working with variable parameters. In order not to compromise the performance of the plant, it is essential to ensure optimum efficiency, assessing in a reliable way losses in operating and non-operating conditions. In most cases transformers are protected by an enclosure protection box designed to meet customers’ needs.
Choke integrated three-phase transformer 125 kVA – 400/300 V – Dyn11 50Hz - AN – 680kg
Three-phase transformer 250 kVA – 220/409 V – Dyn11
50Hz - AN – 200kg
Three-phase transformers with box IP21 - 80 kVA – 400/400 V – AN
Standard production
As the name itself suggests, these products have common features and can be classified according to small differences in accessories or part that are not related to any electric features of the machines.
Standard enclosure
Three-phase transformer- 2500 kVA – 6600/250-350-470-735 V 60Hz - AFWF – 8800kg BOX IP44
All our products can be equipped with enclosure boxes ranging from IP21 up to IP66. If necessary, suitable filtering and cooling systems are supplied.
Fdueg S.r.l. Registered office: Via Garibaldi N° 24
13030 GHISLARENGO (VC) Offices and destination goods: Via Torino N° 33
28064 CARPIGNANO SESIA (NO)
Tel.: +39 0321 824131 Fax.: +39 0321 824222
www.fdueg.com E-mail: fdueg@iol.it
E-mail: info@fdueg.com