Post on 14-Feb-2018
transcript
TwisTlocks for The TransporT indusTryA Twistlock for every application ...
Retractable Twistlocks
Retractable Twistlock Type WCI 151/2.A fully retractable twistlock designed to secure ISO and special containers to rigid, skeletal and platform vehicles/chassis. The securing head retracts below deck level to allow non-containerised loads to be carried.
Retractable Twistlock Type WCI 151/3. Designed to secure ISO and special containers to rigid, skeletal and platform vehicles/chassis. Allows non-containerised loads to be carried by retracting below deck level. It has a cost effective fabricated steel body and is designed for interchangeability of spare parts.
Retractable Twistlock Type WCI 148 RNS. Designed to secure ISO and special containers to rigid, skeletal and platform vehicles/chassis. The securing head retracts below deck level to allow the carriage of non-containerised loads. On the Mk1 version the head can be raised with the container in position.
Retractable Screwdown Twistlock Type WCI 148 RS.This heavy duty twistlock is available with third lock providing the ultimate in load security. On the Mk1 version the head can be raised with the container in position.
Retractable Screwdown Twistlock Type WCI 162 RSB.A fully retractable screwdown twistlock designed specifically for demountable applications. The head can be raised with the container in position and will screwdown onto any thickness aperture plate. Available with weld on or bolt on back plate. Simple to operate.
Non-Retractable Twistlocks
Non-Retractable Twistlock Type WCI 149 2NR.A non-retractable twistlock simply fitted to vehicle/chassis. The securing head remains permanently proud of the deck for loading containers in the shortest possible time. It has a weldable cast steel body and is designed for interchangeability of spare parts.
Non-Retractable Screwdown TwistlockType WCI 149 NRS.The securing head remains permanently proud of the deck for loading containers in the shortest possible time. The screwdown facility and an optional vertical bolt ensures safety for loads during transportation.
Special Applications
Cushion-Lok Type WCI 1058.Specifically designed to meet the stringent demands made by the military for the operation of containerised and demountable units in combat areas. It has specially formed polymer pads bonded to the contact face which reduces noise and vibration.
Double Retractable TwistlockType WCI 1313.Based on WCI 151/3 fabricated twistlock design. For central location on 40’-0” trailers. Twistlock centres are pre-set to ISO dimensions, keeping assembly costs to a minimum.
Marine Twistlock Type WCI 1515.Designed for multiple stacking of containers or swap bodies.
william cook Intermodal
+44 (0)1388 528 24822BS EN ISO 9001:2008
LRQ 4006347
001
William Cook Stanhope_p22_p23.indd 1 17/02/2012 11:59
UIC Twistlock Type WCI 623.This ruggedly constructed twistlock has been designed to secure ISO and special containers to railway wagons. It can be hinged back when not in use, and can be supplied with the locating spigot in the longitudinal position for side attachment.
Rail Wagon Twistlock Type WCI 1965.Interchangeable UIC type design incorporating “twistlock” features. Can be used in multiple positions. Ideal for use on swap body carrying wagons. Accepted for use by National Rail.
Container Corner Castings.Steel corner casting to ISO dimensions and ratings.
Mini-Box Corner Fitting Type WCI 1073.Designed to suit off-shore and mini containers, this mini-type corner fitting is supplied as a one-piece casting, thereby overcoming the inconsistencies commonly associated with fabricated designs.
Weldseal Door Hinge Type WCI 500.This William Cook Intermodal patented door hinge completely seals against water ingress. When normal welding takes place the heat causes a mastic type sealant on the rear face to expand thus eliminating this known corrosion trap.
RO-RO Twistlock Type WCI 1075.This swingdown twistlock is suitable for most Roll-on Roll-off applications. Its rugged design ensures long life and serviceability.
Non-Retractable Twistlock Type WCI 1650.Specially designed non-retractable twistlock without D-dent indexing system.
Container Corner Fitting.Aluminium corner fittings to ISO dimensions and ratings.
Mini-Box Corner Casting Type WCI 4620.Designed for 10’ x 8’ offshore and mini containers. S.W.L. of 20 Tonnes per set of 4.
Twistlock Aperture Casting Type WCI 1035.This casting has been designed for fabrication into demountable body systems for twistlock securing applications.
The assurance of choice and performance.William Cook Intermodal have been supplying twistlocks to the freight haulage industry since 1972 and have established an enviable reputation for design, innovation, quality and service. The William Cook Intermodal range of twistlocks have been designed to secure ISO and special containers to rigid vehicles, trailer chassis and rail wagons in environmental conditions ranging from tropical to sub-zero. By using William Cook Intermodal twistlocks, you can be assured of that extra security your vehicles need while hauling expensive cargos. In addition to supplying its wide range of “off-the-shelf” twistlocks, William Cook Intermodal offers a specialist design service to meet customers’ specific requirements.Product Development.Due to our policy of continuous product design and development we are regularly expanding our product range.
... and other Transport products
william cook Intermodal
william cook IntermodalStanhope Co Durham DL13 2YR Englandphone +44 (0)1388 528 248 fax +44 (0)1388 528 879web www.william-cook.co.uk email intermodal@william-cook.co.uk 23
William Cook Stanhope_p22_p23.indd 2 17/02/2012 11:59
TwisTlock ProducTs
william cook Intermodal
+44 (0)1388 528 248
Skeletal Trailer
Rail Car
Ro Ro TrailerPlatform Trailer
Chassis Truck
WCI 149 2NRNon Retractable Twistlock
WCI 148 RSRetractable ScrewdownTwistlock
WCI 1075Ro Ro Twistlock
WCI 623U.I.C. Twistlock
WCI 1965Non-RetractableRail Twistlock
WCI 148 RNSRetractableNon-ScrewdownTwistlock
WCI 149 RNSNon-RetractableScrewdown Twistlock
WCI 148 RSRetractable(Screwdown)Twistlock
WCI 151/2Retractable Twistlock
WCI 151/3FabricatedRetractable Twistlock
WCI 4405U.I.C. Spigot
Retractable Screwdown Twistlock162 RSB
24
WCI 4716U.I.C. Spigot
BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p24.indd 1 17/02/2012 12:00
RetRactable twistlock - Type WCI 148 RNS Mk1
Type WCI 148 RNS Mk1
©
william cook Intermodal
+44 (0)1388 528 248
this twistlock offers the user the following important advantages:
• Simplyfittedtothevehicle/chassis,usuallybywelding.
• Weldablecaststeelbodyandforgedsteelstemtoensureruggedstrength anddurability.
• Securingheadretractsbelowdeckleveltoallowthecarriageofnon containerisedloads.
• Headcanbeengagedwithcontainerinposition,anadvantagetoswop-body builders.
NB:notrecommendedfortippingapplications.SeeWCI149NRS3HTS.
Operational Procedure to LockTwistlockinretractedpositionwithhandleturnedtoleft.1. Turnhandlebackthrough90ountilindexisengaged andhandleisfacingoutward.2. Loadcontainerontovehicle.3. Fullyraiseheadandturnhandle90ototheleftuntilindex isengaged.
To Unlock1. Fullyraisehead,turnhandle180ototherightuntilindex isengaged.2. Turnhandlebackthrough90ountilindexisengagedand handleisfacingoutward.3. Headwillnowretract.4. Removecontainerfromvehicle.5. Turnhandle90otoleft.
The William Cook Intermodal range of Twistlocks has been designed to secure ISO and special containers to rigid vehicles, trailer chassis and rail wagons in environmental conditions ranging from tropical to sub-zero.
25BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p25_p26.indd 1 17/02/2012 12:05
technical infoRmation
Roundhandleasshownissuppliedasstandard,handleoptionsareavailabletosuitcustomerrequirements.
Weight 8.9kg (19.6lbs)
FINISH:Selfcolour.
©
william cook Intermodal
william cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879webwww.william-cook.co.ukemailintermodal@william-cook.co.uk
Description
Body
Stem
Shearblock
SupportPlate
Collar
Handle
Sleeve
Spring
SteelBall
GroovedPin
SpringPin
Item
1
2
3
4
5
6
7
8
9
10
11
Qty
1
1
1
1
1
1
1
2
4
1
1
RoundHandle
WCI1014
WCI1098
WCI1015
WCI1011
WCI987
WCI988
WCI989
WCI990/1
WCI1236
WCI999
WCI1245
FlatHandle
WCI1014
WCI1099
WCI1015
WCI1011
-
WCI1026
WCI1031
WCI990/1
WCI1236
WCI999
WCI1245
TwistlockAssembly
©
26
William Cook Stanhope_p25_p26.indd 2 17/02/2012 12:05
RetRactable twistlock - Type WCI 148 RNS Mk2
this twistlock offers the user the following important advantages:
• Simplyfittedtothevehicle/chassis,usuallybywelding.
• Weldablecaststeelbodyandforgedsteelstemtoensureruggedstrength anddurability.
• Securingheadretractsbelowdeckleveltoallowthecarriageofnon- containerisedloads.
NB:notrecommendedfortippingapplications.SeeWCI149NRS3HTS.
Operational Procedure to LockTwistlockinretractedpositionwithhandleturnedtoleftorright.1. Fullyraiseheadandturnhandlethrough90ountilindexisengagedand handleisfacingoutward.2. Loadcontainerontovehicle.3. Turnhandle90oineitherdirectionuntilindexisengaged.
To Unlock1. Raiseheadandturnhandle90ountilindexis engagedandhandleisfacingoutward.2. Removecontainerfromvehicle.3. Turnhandle90oineitherdirectionandhead willretract.
The William Cook Intermodal range of Twistlocks has been designed to secure ISO and special containers to rigid vehicles, trailer chassis and rail wagons in environmental conditions ranging from tropical to sub-zero.
Type WCI 148 RNS Mk2
©
william cook Intermodal
+44 (0)1388 528 24827BS EN ISO 9001:2008
LRQ 4006347
001
William Cook Stanhope_p27_p28.indd 1 17/02/2012 12:06
technical infoRmation
Weight 8.5kg (18.7lbs)
FINISH:Selfcolour.
FlatHandleOption.
©
©
Description
Body
Stem
Shearblock
SupportPlate
Collar
Handle
Sleeve
Spring
SteelBall
Item
1
2
3
4
5
6
7
8
9
Qty
1
1
1
1
1
1
1
1
2
RoundHandle
WCI1021
WCI1094
WCI1015
WCI1011
WCI987
WCI988
WCI989
WCI990/1
WCI1236
FlatHandle
WCI1021
WCI1096
WCI1015
WCI1011
-
WCI1026
WCI1031
WCI990/1
WCI1236
TwistlockAssembly
william cook Intermodal
william cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 28
William Cook Stanhope_p27_p28.indd 2 17/02/2012 12:06
RetRactable twistlock -Type WCI 148 RS and WCI 148 RS3 Mk1 (Third Lock)
Type WCI 148 RS
©
william cook Intermodal
+44 (0)1388 528 248
Operational Procedure to LockTwistlock in retracted position with handle turned to left.1. Fully unscrew handnut.2. Turn handle through 90o until index is engaged and handle is facing outward.3. Load container onto vehicle.4. Fully raise head and turn handle 90o to the left until index is engaged5. Tighten handnut.6. Lower pin between handnut spokes (WCI 148/RS3 only).
To Unlock1. Lift pin clear of handnut spokes (WCI 148 RS3 only).2. Fully unscrew handnut.3. Raise head, turn handle 180o to the right until index is engaged.4. Turn handle back through 90o until index is engaged and handle is facing outwards.5. Head will now retract.6. Remove container from vehicle.7. Turn handle 90o to left.8. Tighten up handnut.
this twistlock offers the user the following important advantages:
• Simply fitted to the vehicle/chassis, usually by welding.• Weldable cast steel body and forged steel stem to ensure rugged strength and durability.• Securing head retracts below deck level to allow the carriage of non-containerised loads.• Head can be engaged with container in position, an advantage to swop-body builders.• Third lock prevents accidental unscrewing of handnut, an additional safety feature. (WCI 148 RS3 only).
NB: not recommended for tipping applications. See WCI 149 NRS 3HTS.
The William Cook Intermodal range of Twistlocks has been designed to secure ISO and special containers to rigid vehicles, trailer chassis and rail wagons in environmental conditions ranging from tropical to sub-zero.
29BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p29_p30.indd 1 17/02/2012 12:07
technical infoRmation
Round handle as shown is supplied as standard, handle options are available to suit customer requirements.Weight WCI 148 RS 10kg (22lbs) WCI 148 RS3 10.2kg (22.4lbs)
FINISH: Self colour.
©
©
william cook Intermodal
Description
Body
Stem
Shearblock
Support Plate
Handnut
Handle
Sleeve
Spring
Steel Ball
Grooved Pin
Spring Pin
3rd Lock Assembly
Item
1
2
3
4
5
6
7
8
9
10
11
12*
Qty
1
1
1
1
1
1
1
2
4
1
1
1
Round Handle
WCI 1014
WCI 1016
WCI 1015
WCI 1011
WCI 20160
WCI 988
WCI 989
WCI 990/1
WCI 1236
WCI 999
WCI 1245
WCI 1286
Flat Handle
WCI 1014
WCI 1065
WCI 1015
WCI 1011
WCI 20160
WCI 1027
WCI 1031
WCI 990/1
WCI 1236
WCI 999
WCI 1245
WCI 1286
Twistlock Assembly
*3rd lock assembly fitted to 148 RS3 Twistlock model only.
william cook IntermodalStanhope Co Durham DL13 2YR EnglandPhone +44 (0)1388 528 248 fax +44 (0)1388 528 879web www.william-cook.co.uk email intermodal@william-cook.co.uk 30
William Cook Stanhope_p29_p30.indd 2 17/02/2012 12:07
William Cook Intermodal
RetRaCtable tWistloCk -Type WCI 148 RS Mk2 and WCI 148 RS3 Mk2 (Third Lock)
The William Cook Intermodal range of Twistlocks has been designed to secure ISO and special containers to rigid vehicles, trailer chassis and rail wagons in environmental conditions ranging from tropical to sub-zero.
this twistlock offers the user the following important advantages:
• Simplyfittedtovehicle/chassis,usuallybywelding.
• Weldablecaststeelbodyandforgedsteelstemto ensureruggedstrengthanddurability.
• Screwdownfeatureprovidesextrasecurity.
• Optionalverticalboltpreventsaccidental unscrewingofthehandnut,anadditionalsafety feature.(WCI148RS3only).
NB:notrecommendedfortippingapplications.SeeWCI149NRS3HTS.
Operational Procedure to LockTwistlockinretractedpositionwithhandleeithertoleftorright.1. Fullyunscrewhandnut.2. Fullyraiseheadandturnhandlethrough90ountil indexisengagedandhandleisfacingoutward.3. Loadcontainerontovehicle.4. Turnhandle90oeitherleftorrightuntilindexis engaged.5. Fullytightenhandnut.6. Lowerpinbetweenhandnutspokes(WCI148RS3 only).
To Unlock1. Liftpinclearofhandnutspokes(WCI148RS3 only).2. Fullyunscrewhandnut.3. Raiseheadandturnhandle90ountilindexis engagedandhandleisfacingoutward.4. Removecontainerfromvehicle.5. Turnhandle90otoleftorrightandheadwillretract.6. Tightenuphandnut.7. Lowerpinbetweenspokes(WCI148RS3only).
Type WCI 148 RS Mk2
©
+44 (0)1388 528 24831BS EN ISO 9001:2008
LRQ 4006347
001
William Cook Stanhope_p31_p32.indd 1 17/02/2012 12:08
teChniCal infoRmation
Roundhandleasshownissuppliedasstandard,handleoptionsareavailabletosuitcustomerrequirements.Weight WCI 148 RS 9.7kg (21.3lbs) WCI 148 RS3 9.8kg (21.6lbs)
FINISH:Selfcolour.
©©
William Cook Intermodal
Description
Body
Stem
Shearblock
SupportPlate
Handnut
Handle
Sleeve
Spring
SteelBall
3rdLockAssembly
Item
1
2
3
4
5
6
7
8
9
10*
Qty
1
1
1
1
1
1
1
1
2
1
RoundHandle
WCI1021
WCI1095
WCI1015
WCI1011
WCI20160
WCI988
WCI989
WCI990/1
WCI1236
WCI1287
FlatHandle
WCI1021
WCI1099
WCI1015
WCI1011
WCI20160
WCI1027
WCI1031
WCI990/1
WCI1236
WCI1287
TwistlockAssembly
*3rdlockassemblyfittedto148RS3Mk2Twistlockmodelonly.
William Cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879Webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 32
William Cook Stanhope_p31_p32.indd 2 17/02/2012 12:08
NoN-RetRactable twistlock - Type WCI 149 2NR
Type WCI 149 2NR
©
william cook Intermodal
+44 (0)1388 528 248
this twistlock offers the user the following important advantages:
• Simplyfittedtovehicle/chassis,usuallybywelding.
• Weldablecaststeelbodyandforgedsteelstemtoensureruggedstrength anddurability.
• Securingheadremainspermanentlyproudofthedeckforloadingcontainers intheshortestpossibletime.
NB:notrecommendedfortippingapplications.SeeWCI149NRS3HTS.
Operational Procedure to LockTwistlockinloadpositionwithoutcontainer,handlefacingoutward.1. Loadcontainerontovehicle.2. Turnhandle90oineitherdirectionuntilindexisengaged.
To Unlock1. Turnhandle90ountilindexisengagedandhandleisfacingoutward.2. Removecontainerfromvehicle.3. Turnhandle90otoleftorright.
The William Cook Intermodal range of Twistlocks has been designed to secure ISO and special containers to rigid vehicles, trailer chassis and rail wagons in environmental conditions ranging from tropical to sub-zero.
33BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p33_p34.indd 1 17/02/2012 12:09
techNical iNfoRmatioN
Roundhandleasshownissuppliedasstandard,handleoptionsareavailabletosuitcustomerrequirements.
Weight 6.9kg (15.2lbs)
FINISH:Selfcolour.
©
©
william cook Intermodal
Description
Body
Stem
Collar
Handle
Sleeve
SteelBall
Spring
GrubScrew
Item
1
2
3
4
5
6
7
8
Qty
1
1
1
1
1
1
1
1
RoundHandle
WCI1066
WCI1067
WCI987
WCI988
WCI989
WCI1236
WCI990/2
WCI1237
FlatHandle
WCI1066
WCI1068
-WCI1026
WCI1031
WCI1236
WCI990/2
WCI1237
TwistlockAssembly
william cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 34
William Cook Stanhope_p33_p34.indd 2 17/02/2012 12:09
NoN-RetRactable ScRewdowN twiStlock -Type WCI 149 NRS and NRS3 (Third Lock)
Type WCI 149 NRS3
©
william cook Intermodal
+44 (0)1388 528 248
Operational Procedure to LockTwistlock in load position without container, handle facing outwards.1. Fully unscrew handnut.2. Load container onto vehicle.3. Turn handle 90o until index is engaged.4. Fully tighten handnut.5. Lower pin between handnut spokes (WCI 149 NRS3 only).
To Unlock1. Lift pin clear of handnut spokes (WCI 149 NRS3 only).2. Unscrew handnut.3. Raise head and turn handle 90o until index is engaged and handle is facing outward.4. Remove container from vehicle.5. Turn handle 90o to left or right.6. Tighten up handnut.
this twistlock offers the user the following important advantages:
• Simply fitted to vehicle/chassis, usually by welding.
• Weldable cast steel body and forged steel stem to ensure rugged strength and durability.
• Securing head remains permanently proud of the deck for loading containers in the shortest possible time.
• Screwdown feature provides extra security.
• Optional third lock prevents accidental unscrewing of the handnut, an additional safety feature. (WCI 149 NRS3 only).
NB: The Twistlock is suitable for tipping applications but must be fitted with High Tensile Stem, Twistlock type 149 NS3 HTS.
The William Cook Intermodal range of Twistlocks has been designed to secure ISO and special containers to rigid vehicles, trailer chassis and rail wagons in environmental conditions ranging from tropical to sub-zero.
35BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p35_p36.indd 1 17/02/2012 12:10
Round handle as shown is supplied as standard, handle options are available to suit customer requirements.
Weight NRS 7.9kg (17.4lbs) NRS3 8.1kg (17.8lbs)
FINISH: Self colour.
©
©
techNical iNfoRmatioN
william cook Intermodal
Description
Body
Stem
Handnut
Handle
Sleeve
Steel Ball
Spring
Grub Screw
3rd Lock Assembly
Item
1
2
3
4
5
6
7
8
9*
Qty
1
1
1
1
1
1
1
1
1
Round Handle
WCI 1023
WCI 1024
WCI 20160
WCI 988
WCI 989
WCI 1236
WCI 990/2
WCI 1237
WCI 1285
Flat Handle
WCI 1023
WCI 1025
WCI 20160
WCI 1027
WCI 1031
WCI 1236
WCI 990/2
WCI 1237
WCI 1285
Twistlock Assembly
*3rd lock assembly fitted to 149 NRS3 Twistlock model only.
william cook IntermodalStanhope Co Durham DL13 2YR EnglandPhone +44 (0)1388 528 248 fax +44 (0)1388 528 879web www.william-cook.co.uk email intermodal@william-cook.co.uk 36
William Cook Stanhope_p35_p36.indd 2 17/02/2012 12:10
RetRactable twistlock - Type WCI 151/2
Type WCI 151/2
©
william cook Intermodal
+44 (0)1388 528 248
this twistlock offers the user the following important advantages:
• Simplyfittedtovehicle/chassis,usuallybywelding.
• Weldablecaststeelbodyandforgedsteelstemtoensureruggedstrength anddurability.
• Securingheadretractsbelowdeckleveltoallownon-containerised loadstobecarried.
NB:notrecommendedfortippingapplications.SeeWCI149NRS3HTS.
Operational Procedure to LockTwistlockinretractedpositionwithhandleturnedtoleftorright.1. Fullyraiseheadandturnhandle90osohandle facesoutward.2. Loadcontainerontovehicle.3. Tolockturnhandle90otoleftorrightuntilindex isengaged.
To Unlock1. Turnhandle90ountilindexisengagedandhandleis facingoutward.2. Removecontainerfromvehicle.3. Raiseheadandturn90otoleftorrighttoretract.
The William Cook Intermodal range of Twistlocks has been designed to secure ISO and special containers to rigid, skeletal and platform vehicles/chassis, in environmental conditions ranging from tropical to sub-zero.
37BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p37_p38.indd 1 17/02/2012 12:11
technical infoRmation
Roundhandleasshownissuppliedasstandard,handleoptionsareavailabletosuitcustomerrequirements.
Weight 7.2kg (15.8lbs)
FINISH:Selfcolour.
©
©
william cook Intermodal
Description
Body
Stem
Shearblock
Handle
Sleeve
Pin
SteelBall
Spring
Pin
Item
1
2
3
4
5
6
7
8
9
Qty
1
1
1
1
1
1
2
1
1
RoundHandle
WCI1074
WCI1090
WCI1000
WCI988
WCI989
WCI999
WCI1236
WCI990/1-
FlatHandle
WCI1074
WCI1089
WCI1000
WCI1026
WCI1031
WCI999
WCI1236
WCI990/1-
RaveHandle
WCI1074
WCI1090
WCI1000
WCI1055
WCI1031
WCI999
WCI1236
WCI990/1
WCI1246
TwistlockAssembly
william cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 38
William Cook Stanhope_p37_p38.indd 2 17/02/2012 12:11
RetRactable twistlock - Type WCI 151/3
Type WCI 151/3
william cook Intermodal
+44 (0)1388 528 248
this twistlock offers the user the following important advantages:
• Simplyfittedtovehicle/chassis,usuallybywelding.
• Fabricatedsteelbodyandforgedsteelstemtoensureruggedstrength anddurability.
• Securingheadretractsbelowdeckleveltoallownon-containerisedloads tobecarried.
NB:notrecommendedfortippingapplications.SeeWCI149NRS3HTS.
Operational Procedure to LockTwistlockinretractedpositionwithhandleturnedtoleftorright.1. Fullyraiseheadandturnhandle90osohandlefacesoutward.2. Loadcontainerontovehicle.3. Tolockturnhandle90otoleftorrightuntilindex isengaged.
To Unlock1. Turnhandle90ountilindexisengaged andhandleisfacingoutward.2. Removecontainerfromvehicle.3. Raiseheadandturn90otoleftorright toretract.
The William Cook Intermodal range of Twistlocks has been designed to secure ISO and special containers to rigid, skeletal and platform vehicles/chassis, in environmental conditions ranging from tropical to sub-zero.
39BS EN ISO 9001:2008LRQ 4006347
001
©
William Cook Stanhope_p39_p40.indd 1 17/02/2012 12:12
technical infoRmation
Description
Body
Stem
Shearblock
Handle
Sleeve
Pin
SteelBall
Spring
Pin
Item
1
2
3
4
5
6
7
8
9
Qty
1
1
1
1
1
1
2
1
1
RoundHandle
WCI1642
WCI1090
WCI1000
WCI988
WCI989
WCI999
WCI1236
WCI990/1-
FlatHandle
WCI1642
WCI1089
WCI1000
WCI1026
WCI1031
WCI999
WCI1236
WCI990/1-
RaveHandle
WCI1642
WCI993
WCI1000
WCI1055
WCI1031
WCI999
WCI1236
WCI990/1
WCI1246
TwistlockAssembly
Ravehandleasshown.Handleoptionsareavailabletosuitcustomerrequirements.
Weight 6.7kg (14.7lbs)
FINISH:Selfcolour.
©
©
william cook Intermodal
william cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 40
William Cook Stanhope_p39_p40.indd 2 17/02/2012 12:12
RetRactable ScRewdown twiStlock -Type WCI 162 RSB and WCI 162 RSW
william cook Intermodal
+44 (0)1388 528 248
this twistlock offers the user the following important advantages:
• Fullyretractabletoallowthecarriageofnon-containerisedloads.
• Screwdownfacility,eliminatesmovementbetweencontainerandchassis.
• Variableheightshearblockwillacceptanythicknessapertureplate.
• Headcanbeengagedwithcontaineralreadyinposition,anadvantageto swapbodybuilders.
• Simpletooperate.
• Boltonorweldonbackplates.
• Safetythirdlockpreventsaccidentalunscrewingofhandnut.
• Ideallysuitedtodemountableapplications.
NB:fortippingapplicationsusetheWCI149NRS3HTS.
The William Cook Intermodal range of Twistlocks has been designed to secure ISO and swap body containers to rigid vehicles, demountable systems and trailer chassis.
41BS EN ISO 9001:2008LRQ 4006347
001
©
William Cook Stanhope_p41_p42.indd 1 17/02/2012 12:13
technical infoRmation
Description
Body
Shearblock
Stem
SupportCollar
Handnut
3rdLockAssembly
Spring
Ball
GroovePin
Handle
Sleeve
Item
1
2
3
4
5
6
7
8
9
10
11
Qty
1
1
1
1
1
1
1
2
1
1
1
PartNo
WCI4599
WCI4567
WCI4600
WCI4635
WCI20161
WCI4608
WCI990/01
MF4510000
WCI999
WCI988
WCI989
WCI162
©
Weight 8.6kg (19lbs)
FINISH:Selfcolour.
william cook Intermodalwilliam cook Intermodal
william cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 42
©
©
©
William Cook Stanhope_p41_p42.indd 2 17/02/2012 12:13
William Cook Intermodal
U.I.C. SPIGOT CASTING - Type WCI 623
This product is made from special William Cook Intermodal steel designed for low temperature working at -40°C as standard.
• DesignedtosecureISOandspecialcontainerstorailwaywagons.
• U.I.C.Standard.
This casting offers the user the following important advantages:
• Weldablecaststeelconstructiontoensureruggedstrength anddurability.
• Hingesbackwhennotinuse.
©
© ©
Type WCI 623 SM
View of underside
WCI 623 EM Wagon end location type shown
U.I.C. Standard
Weight 10.8kg (23.8lbs)
FINISH:Selfcolour.
+44 (0)1388 528 24843BS EN ISO 9001:2008
LRQ 4006347
001
William Cook Stanhope_p43_p44.indd 1 17/02/2012 12:18
• DesignedtosecureISOandspecialcontainersandSwapBodies torailwagons.
• AcceptedbyNationalRail.
This Twistlock offers the user the following important advantages:
• Weldablecaststeelbodyensuresruggedstrengthanddurability.
• InterchangableU.I.C.typedesignincorporating‘twistlock’features.
• Hingesbackwhennotinuse.
NB:operatinghandleoptionalextra.
William Cook Intermodal
©©
©
Twistlock shown in locked position
Twistlock shown in unlocked position
Weight 10.0kg (22.0lbs)
FINISH:Selfcolour.
RAIL WAGON TWISTLOCK - Type WCI 1965
This product is made from special William Cook Intermodal steel designed for low temperature working at -40°C as standard.
©
Type WCI 1965
William Cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248Fax+44(0)1388528879Webwww.william-cook.co.ukEmailintermodal@william-cook.co.uk 44
William Cook Stanhope_p43_p44.indd 2 17/02/2012 12:18
Ro-Ro TwisTlock - Type WCI 1075
Type WCI 1075
©
william cook Intermodal
+44 (0)1388 528 248
This Twistlock offers the user the following important advantages:
• Swingdowntypesuitableformostroll-onroll-offapplications.
• Ruggeddesignensureslong-lifeandserviceability.
Operational Procedure to Lock1. Raisetwistlockbodyintoloadposition.2. Loadcontainer.3. Turnhandletolock.
To Unlock1. Turnhandletorelease.2. Unloadcontainer.
The William Cook Intermodal range of Twistlocks has been designed to secure ISO and special containers to rigid vehicles, trailer chassis and rail wagons in environmental conditions ranging from tropical to sub-zero.
45BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p45_p46.indd 1 17/02/2012 12:19
©
©
Weight 5kg (11lbs)
FINISH:Selfcolour.
william cook Intermodal
Technical infoRmaTion
Description
Body
Stem
Collar
Spring
SteelBall
Handle
Sleeve
Item
1
2
3
4
5
6
7
Qty
1
1
1
1
2
1
1
PartNo
WCI1637
WCI1639
WCI1638
WCI900/1
WCI1236
WCI1641
WCI989
william cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 46
William Cook Stanhope_p45_p46.indd 2 17/02/2012 12:19
Marine TwisTlock - Type WCI 1515
©
william cook Intermodal
+44 (0)1388 528 248
• Designedasacontainer-to-deckandcontainer-to-containerlockingdevice.
• Secureswithsafety,deck-bornecontainersstackedthree-highupto stackloadof45tons.
• Castbodyandforgedsteelheadsgivesruggedstrengthanddurability.
• Handlepositionactsasvisualindicatorastolocked/unlockedposition.
47BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p47_p48.indd 1 17/02/2012 12:20
Technical inforMaTion - Type WCI 1515 Marine Twistlock
Operational Procedure1. Engagetheloweroffsetheadintothetopcontainers cornerfitting.
2. Alignupperheadtoacceptthenextcontainer.
3. Operateleverthrough90°thusindexingthetwistlockheads withintheirrespectivecornercastings.
Weight 6.5kg (14.3lbs)
william cook Intermodal
william cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 48
©
©
William Cook Stanhope_p47_p48.indd 2 17/02/2012 12:20
Interconnector - Type WCI 1212
William cook Intermodal
+44 (0)1388 528 248
this Interconnector offers the user the following important advantages:
• Easeofoperation.
• Provenin-serviceuse.
• Robustdesign.
• ApprovedbyUSNavalCivilEngineeringLaboratory.
NB:TheWCI1212canbeusedintheendwallapertureoflowercornerfittingsorthesidewallaperturesofupperandlowercornerfittings.
Operational Procedure1. Indexhandletooneofthetwoloadpositions.2. InsertInterconnectorheadintoapertureofcornerfitting.3. Indexhandletosecondloadposition.4. Positionsecondcontainersothattheconnector protrudesthroughthecornerfittingaperture.5. Indexhandletothelockposition.
Designed and developed to connect military quadcons and tricons into a single 20’ unit. Also used for connecting 2 x 10’ tank containers into single 20’ unit.
49BS EN ISO 9001:2008LRQ 4006347
001
©
William Cook Stanhope_p49_p50.indd 1 17/02/2012 12:21
technIcal InformatIon
Weight 6kg (13.2lbs)
FINISH:Selfcolour.
William cook Intermodal
©
©
©
William cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879Webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 50
William Cook Stanhope_p49_p50.indd 2 17/02/2012 12:21
William Cook Intermodal
Cushion-Lok TWisTLoCk - Type WCI 1058
This Twistlock offers the user the following important advantages:
• Reduceshock,vibrationandnoise,idealfortransportingsensitiveloads.
• Simplyfittedtovehicle/chassis,usuallybywelding.
• Weldablecaststeelbodyandforgedsteelstemtoensureruggedstrength anddurability.
• Securingheadremainspermanentlyproudofthedeckforloading containersintheshortestpossibletime.
• Screwdownfeatureprovidesextrasecurity.
• Thirdlockpreventsaccidentalunscrewingofthehandnut,an additionalsafetyfeature.
Operational Procedure to LockTwistlockinloadpositionwithoutcontainer,handlefacingoutward.1. Fullyunscrewhandnut.2. Loadcontainerontovehicle.3. Turnhandle90°untilindexengaged.4. Fullytightenhandnut.5. Lowerpinbetweenhandnutspokes.
To Unlock1. Liftpinclearofhandnutspokes.2. Unscrewhandnut.3. Raiseheadandturnhandle90ountilindexis engagedandhandleisfacingoutward.4. Removecontainerfromvehicle.5. Turnhandle90otoleftorright.6. Tightenuphandnut.
The Cushion-Lok Twistlock has been designed to secure ISO and special containers to rigid vehicles and trailer chassis. Special polymer pads reduce the metal-to-metal contact between the corner fitting and twistlock, thereby reducing the shock and vibration together with noise.
+44 (0)1388 528 24851BS EN ISO 9001:2008
LRQ 4006347
001
©
William Cook Stanhope_p51_p52.indd 1 17/02/2012 12:21
William Cook Intermodal
TeChniCaL informaTion
Description
Body
Stem
Handnut
Handle
Sleeve
SteelBall
Spring
Grubscrew
3rdLockBracket
3rdLockBolt
Item
1
2
3
4
5
6
7
8
9
10
Qty
1
1
1
1
1
1
1
1
1
1
PartNo
WCI1076
WCI1079
WCI20160
WCI988
WCI989
WCI1236
WCI990/2
WCI1237
WCI949
WCI960
©
© ©
©
William Cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879Webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 52
William Cook Stanhope_p51_p52.indd 2 17/02/2012 12:21
Dovetail twistlock - Type WCI 4483, 4484, WCI 20032
william cook Intermodal
+44 (0)1388 528 248
this twistlock offers the user the following important advantages:
• Removabletwistlock.• Lowprofilebaseonly28mmhigh.• Designedforasafeworkingloadof15,000kg.
Operational Procedure to Lock1. WeldWCI4484sockettodeck.2. SlideWCI4483twistlockintosocket.3. Indexhandlesothatstemheadisinlinewithshearblock.4. Loadcontainer.5. Indexhandletolocktwistlockhead.
To Unlock1. Indexhandletounlock twistlockhead.2. Unloadcontainer.
A removable Twistlock ideally designed for use on-board a ship’s deck.
53BS EN ISO 9001:2008LRQ 4006347
001
©
©
William Cook Stanhope_p53_p54.indd 1 17/02/2012 12:22
technical information
Weight 10kg (22lbs)
FINISH:Selfcolour.
william cook Intermodal
william cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 54
©
©
©
©
William Cook Stanhope_p53_p54.indd 2 17/02/2012 12:22
Steel CaStingS for ContainerSEckbeschläge fur Containers/Pièces de coin des conteneurs
Design and Survey
Entwurf und Begutachtung
Modele et Classification
Chemical Properties
Chemische Eigenschaften
Proprietes Chimiques
Mechanical Properties - Minimum
Mechanische Eigenschaften - Minimum
Proprietes Mecaniques - Minimum
Tensile Tests
Zerreissproben
Essais de Tension
Branding-Identification
Markenbezeichnung - Kennzeichnung
Impression au fer Chaud- Identification
Radiography
Radiografie
Radiographie
The Castings we supply shall be in accordance with the technical requirements of I.S.O. 1161, also the survey of Lloyd’s Register of Shipping or Germanischer Lloyd, as undernoted.
Die Guss-Stücke, die wir beliefern, müssen den technischen Anforderungen von I.S.O. 1161 entsprechen, und underliegen ebenfalls der Begutachtung von Lloyds Schiffsregister, oder Germanischem Lloyd, wie unten erwahnt.
Les pièces que nous fournissons remplissent les conditions techniques requises par I.S.O. 1161, et conformes à la classification de Lloyds Register of Shipping ou Germanischer Lloyd.
The steel used shall contain a minimum of 1.0% Manganese, with Carbon Equivalent of 0.45% maximum calculated by the following formula: Mn + Cr + Mo + V + Ni + CuCarbon Equiv. % = C +
6 5 15
Der verwandte Stahl muss einen Minimumgehalt an 1.0% Mangen aufweisen sowie einen Maximal gleichwert von 0.45% Kohlenstoff, der sich aus folgender Formel errechnet: Mn + Cr + Mo + V + Ni + CuKohlenstoff Gleichwert % = C +
6 5 15
L’acier employé contiendra un minimum de 1% de manganèse avec un maximum de 0.45% d’equivalent de carbone, calculé d’après la formule suivante: Mn + Cr + Mo + V + Ni + CuEquiv. carbone % = C +
6 5 15
Ultimate Tensile Strength -430 - 600 N/mm2 Yield Stress -220 N/mm2
Elongation on 71 mm -25% Reduction of Area -40%
Absolute Dehnungsfestigkeit -430 - 600 N/mm2 Streckpannung -220 N/mm2
Bruchdehnung bei 71 mm -25% Flächenverminderung -40%
Effort de traction maximal -430 - 600 N/mm2 Limite de résistance -220 N/mm2
Elongation sur 71 mm -25% Réduction de superficie -40%
The number of tensile tests taken shall be as agreed between the inspection authority and ourselves.
Die Anzahl der vorgenommenen Zerriessproben soIl so gross sein, wie sie in Ubereinstimmung mit der Aufsichtsbehörde und uns selbst vereinbart wird.
La classification de l’autorité d’inspection et nous-mêmes conviendrons du nombre d’essais de tension à appliquer.
Each casting shall be branded with the mark of the inspection authority, maker’s mark, cast number and I.S.O. 1161.
Jeder Gussteil muss mit dem Kennzeichen von der Aufsichtsbehörde, dem Herstellerkennzeichen, der Gussnummer und I.S.O. 1161 eingerbrannt versehen sein.
Chaque moulage portera l’estampille au fer chaud, de l’autorité d’inspection, du fabricant, le numéro du moulage et le I.S.O. 1161.
An agreed representative quantity of castings shall be selected at random and subjected to the form of examination approved by the inspection authority.
Eine vereinbarte repräsentative Guss-stückmenge muss aufs Geratewohl ausgewählt und sodann einer Metalluntersuchung unterworfen werden, die von der Aufsichtsbehörde gebilligt werden kann.
On conviendra d’une quantité représentative de moulages qui seront sélectionnés au hasard et soumis à l’examen approuvé par I’autorité d’inspection.
Information Sheet No.18, Mitteilungsblatt Nr.18, Feuille d’information 18
William Cook Intermodal
+44 (0)1388 528 24855BS EN ISO 9001:2008
LRQ 4006347
001
William Cook Stanhope_p55_p56.indd 1 17/02/2012 14:38
Non-Destructive Tests - Interpretation
Zerstörungsfreie Werkstoffprofüngen - Auswertung
Essais Non-Destructeurs - Interpretation
Examination - Visual
Prüfung - Optisch
Examen Visuel
Tolerances - Overall Sizes
Gesamt - Einpassgrössen
Tolerances - Dimensions Globales
Inspection - Independent
Einzel - Nachprüfung
Inspection Impartiale
Test Certificates
Prüfungsatteste
Certificats D’essais
Impact Properties
Stossfestigkeits - Eigenschaften
Proprietes D’impact
The interpretation of examination shall be related to our normal quality standard for this type of casting.
Die Auswertung muss im Einklang mit dem normalen Qualitäts-standard für derartige Gussteiltypen vorgenommen werden.
L’interprétation de l’examen sera en rapport avec notre norme habituelle de qualité pour ce type de moulage.
Each casting shall be visually examined for surface defects.
Jeder Gussteil muss optisch geprüft werden, ob nicht Oberflächenmängel vorliegen.
Chaque moulage sera examiné visuellement pour détecter les défaults de surface.
All castings shall be gauged to ensure that they conform to the tolerances and notes on our drawings.
Alle Gussteile müssen abgemessen werden um sicherzustellen, dass sie den Einpassgrössen und Bemerkungen in unseren Zeichnungen entsprechen.
Tous les montages seront calibrés pour garantir qu’ils répondent effectivement aux tolérances et aux notes qui figurent sur nos schémas.
Independent inspection shall be at our Works by Lloyd’s Register or Germanischer Lloyd.
Einzelprüfung wird in unseren Werken von Lloyds Schiffsregister oder Germanischem Lloyd vorgenommen.
Lloyds Register ou Germanischer Lloyd effectuera une inspection impartiale a nos usines.
A certificate, signed on behalf of the inspection authority, shall be sent to the Customer after the castings have been despatched, if requested on order.
Ein Attest, welches im Auftrag von der Aufsichtsbehörde erteilt werden soIl, wird dem Kunden zugesandt, nachdem die Gussteile versandt worden sind.
Un Certificat au nom de la classification de l’autorité d’inspection sera délivré au client aprés expédition des moulages.
The steel shall be of the kind which, with Charpy Vee Notch Tests taken upon separately prepared test bars, gives minimum impact figures of 20.3 Joules at minimum of minus 40°c. If the Corner Castings are intended for service at temperatures below minus 40°c, impact tests shall be carried out in accordance with the inspection authority. In such cases the service temperature is to be specified on the purchase order for Corner fittings.
Der Stahl muss derart beschaffen sein, dass er, bei Charpy Scharfkerbprüfungen, die auf separat bereiteten Prüfungsstangen vorgenommen werden, eine Stossfestigkeit mit einem Minimum von 20,3 in Jouleschen Ziffern aufweist und dies bei einer Minimumtemperatur von minus 40° Celcius. Sollten die Eck-guss-stücke für Dienstleistung bei Temperaturen unter minus 40° Celsius in Betracht gezogen werden, so müssen die Stossfestigkeits-prüfungen im Einklang mit der Aufsichtsbehorde ausgefOhrt werden. In solchen Fällen muss die Leistungs-temperatur im Kaufauftrag für die Eckverbundstücke genau spezifiziert werden.
L’acier, après avoir subi des essais ‘Charpy Vee Notch’ sur des barres d’essai préparées séparemént, doit offrir une résilience minimum de 20,3 Joules à un minimum de température de -40°c. Si les moulages en coin sont destinés a être utilisés à des températures en-dessous Qe -40°c, les essais de choc devront s’effectuer selon la classification de l’autoité d’inspection. Dans ce cas, la temperature d’utilisation prevue doit etre specifiee sur le bulletin de commandes des moulages en coin.
*In respect of this information no warranties may be implied in any manner whatsoever.
*Mit Bezug auf diese Information ist keine Gewährleistung irgenwelcher Art dabei miteinbegriffen.
*Aucune garantie, quelle qu’elle soit, ne peut être impliquée en ce qui conceme ces renseignements.
Steel CaStingS for ContainerSEckbeschläge fur Containers/Pièces de coin des conteneurs
William Cook Intermodal
William Cook IntermodalStanhope Co Durham DL13 2YR EnglandPhone +44 (0)1388 528 248 fax +44 (0)1388 528 879Web www.william-cook.co.uk email intermodal@william-cook.co.uk 56
William Cook Stanhope_p55_p56.indd 2 17/02/2012 12:24