Post on 27-May-2020
transcript
UNIVERSAL
LIGHTING
www.hella.com/truck
www.hella.com/agriculture
2PS 013 305-011 2SB 013 399-021 2BA 013 333-021 2ZR 013 401-111 8RA 013 347-061
TRUCK
CUSTOMISED LIGHT DESIGN!
The great variety of shapes and various
combination options paired with a technically
optimised product design: the universal,
modularly conceived HELLA Shapeline light
series is a true innovation in vehicle lighting.
Whether the front, side or rear of a vehicle,
every vehicle series - whether big or small
– can have a unique and also consistent
look using a customised configuration and
arrangement of lights. Even small vehicle series
benefit from HELLA Shapeline's striking optics
and its great recognition value.
Alongside innovative technology and the familiar
high HELLA product quality, the variety of
Shapeline light shapes provides you with nearly
infinite design freedom.
Here, all HELLA Shapeline lights are available
in two different designs: the classic straight-line
Shapeline Tech design and the dynamic curved
Shapeline Style design.
2SD 013 342-121 8RA 013 347-061
AGRICULTURE
Configuration examples
Which bulb is the right one for each respective vehicle
and its area of use? The answers to these and many
other questions can be found thanks to the brand new
and completely innovative HELLA lamp configurator
with many additional functionalities. In addition to
comprehensive information on the HELLA lamp
program, the configurator allows you to identifying the
right one for your specific requirements in just a few
clicks - easy, quick and comfortable!
www.hella.com/bulbs
THE QUICKEST WAY
TO THE RIGHT HELLA LIGHT SOURCE
h ti hi l
Y
LLA LIGHT SOURCE
The HELLA Shapeline online configuration tool simply
turns customers into lighting designers:
With just a few clicks, make your own vehicle light
design for the front, sides and rear – and view the
result immediately as it gets applied elegantly to a
car outline.
www.hella.com/shapeline
THE SHAPELINE CONFIGURATOR:
DESIGN A LIGHT!
ALL-ROUND SATISFACTION:
UNIVERSAL LIGHTING BY HELLA
Good vehicle lighting knows many details.
It provides not just optimal workplace illumination and therefore
increased work efficiency but also results in a greater amount of safety
for all road users.
This rings true in particular also for the HELLA universal lighting
products for agricultural machinery, trucks and trailers. For strong
vehicles require strong lighting - and that's where HELLA is just the
right partner for you. From work lights and front, lateral and rear lighting
to auxiliary lamps: we offer a broad portfolio of high-quality products
characterised by fit accuracy, durability and innovative technologies.
Throughout, we use our longstanding OE expertise and successfully
apply it to the independent aftermarket.
This catalog will present you with a selection of universal lighting
products: efficient all-rounders that you can rely on.
A summary of our entire product portfolio in the area of universal parts
comprising lighting as well as electric and electronic products can be
found in our universal parts catalog - and online.
www.hella.com/upc
Experience the light distribution of the HELLA work and auxiliary lights
as well as beacons and optical warning systems in direct comparison -
with ELIVER, our unique online tool.
www.hella.com/eliver
ww
w.h
ell
a.c
om
/eli
ve
r
4
Work lights/Reversing lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Beacons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Front lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Auxiliary driving lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Rear lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Side marker lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Marker lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Order number overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
HELLA WORK LIGHTS
For more safety and comfort
Nighttime assignments, whether they be shunting manoeuvres, loading work or field work, have one thing in common:
they require optimal work area illumination. And good illumination requires good headlamps! This is the only way to
enable focused operations yielding efficient work results.
No problem for the new HELLA work lights! Thanks to our many years of experience, these generate the right
workplace illumination for any application area. Whether in agriculture, on trucks or trailers: HELLA work lights make
every operation in the dark simple.
Born to work in the toughest conditions!
Thanks to state-of-the-art technologies developed using our OE know-how, HELLA work lights withstand the most difficult of
environmental conditions. Especially its sophisticated thermal management and the lamps' corrosion resistance ensure a very long
service life. After all, only when the heat can be optimally dissipated from the high-power LED headlamps can high-power
illumination performance take place unhindered. Thanks to corrosion-resistant headlamps due to special coatings or plastic
housings, a long service life is guaranteed. Go for the best quality and rev up your working efficiency.
CoroSafe/NanoSafe
New process to combat corrosion in aluminium housings
With its new coating processes against corrosion, HELLA is once again
setting standards in work light durability and toughness of aluminium
housings. Two additionally implemented layers of surface coating on the
work lights greatly improve their durability. The sophisticated combination
of different coating methods ensures a high level of corrosion resistance
and improved protection against damage to the work lights. This means
that the housing is well-protected and ideal for use in harsh environments
with large amounts of salt and water. CoroSafe is used primarily in
HELLA LED reversing lights. When using the NanoSafe coating for special
applications, such as mines, an additional coating is added. It protects
against corrosion under particularly harsh conditions.
Compact Series
Corrosion-free and light plastic housings.
The innovative plastic housing of the Compact series boasts similar
thermal conductivity properties to aluminium. This means that the
LEDs can operate using the full power supply, even at high ambient
temperatures. Thanks to the innovative plastic material of the housing,
corrosion is averted and a long service life guaranteed. The Compact
series additionally impresses with its considerably reduced weight and
improved vibration characteristics.
Innovative heat-conducting plastic housing against corrosion
CoroSafe coating for work lights with
aluminium housing
NanoSafe coating for work lights with
aluminium housing for especially harsh
conditions, such as mines
Video clip - scan CoroSafe and Thermo Pro, then watch and learn more.
7
ZEROGLARE-technology for glare-free illumination
In order to expand the same safety and comfort from the automotive area
to other target groups, HELLA has developed a new optical system for
work lights. The ZEROGLARE system ensures that drivers of oncoming
vehicles are not glared. Unlike the usual LED work lights, the light/dark
cut-off line appears very sharp here and the light of the ZEROGLARE
headlamps is directed specifically onto the area in front of the vehicle.
Various series with this technology are already available.
HELLA solutions for more safety and comfort during the
daily work routine
Vehicle lighting plays an important role when it is a question of safety and a convenient working environment. Especially when it
comes to workplace safety, there still are many situations that are in need of improvement. It is for example important that danger
zones can be optically marked out or marked off whenever such a need arises so that everyone in the affected area can be warned
and protected in good time. Until, now, this had to be done by the driver or by other workers who would manually mark off the
concerned areas. This meant that it was not possible to demarcate individual sectors as required in a simple, swift and safe action.
With its VISIOTECH projection technology, HELLA has introduced products on the market, which can remedy exactly such situations.
Oncoming traffic should however not only be warned or made aware but also experience as little glaring as possible so that
accidents due to glaring and poor visibility can be avoided. This is why HELLA has developed the glare-free ZEROGLARE
illumination that does not glare oncoming traffic.
VISIOTECH technology – communicating with light
The new VISIOTECH projection technology from HELLA provides you with
a means of communicating with light. This technology uses light to project
various symbols and types of illumination onto the ground.
This application serves to warn other vehicles or pedestrians of an
oncoming vehicle. The lines projected in front of a vehicle can, however,
also be used as a means for simpler vehicle navigation. Projecting
symbols can also easily and safely mark work areas. The result is more
safety, comfort and convenience during the daily work routine.
The application of VISIOTECH technology products is approved for
applications outside the StVZO. For special applications
on the road, special permits are required.
Video clip – scan ZEROGLARE, then watch and learn more.
Glare-free ZEROGLARE illumination
Application examples: VISIOTECH technology
Compare traditional illumination (left) with ZEROGLARE illumination (right)
8
Close-range illumination Long-range illumination
Close-range illumination Long-range illumination
This LED product has the following features:
WORKLIGHTS
RokLUME 380 N
Light output (measured): up to 7,800 lumens, power requirement: 84 watts, colour temperature: 5,000 kelvins, multivolt, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof/ submersible), ECE-R10-approved, aluminium die-cast housing "NanoSafe non-stick easy to clean" – surface coating, DT connector*.
ZEROGLARE1) 1GA 996 197-0011)
Long-range illumination 1GA 996 197-0211)
Close-range illumination 1GA 996 197-0311)
Spot illumination 1GA 996 197-0411)
* recommended accessories:
2,000 mm cable with DT connector and bare cable heads
8KB 990 299-011
This LED product has the following features:
ZEROGLARE
1)
Ultra Beam LED Gen. II
Light output (measured): 4,000 lumens, power requirement: 56 watts, colour temperature: 6,500 kelvins, multivolt, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof / submersible), ECE-R10-approved, high-quality aluminium housing, ADR/GGVSEB upon request, DT connector*.
Close-range illumination
Upright or pendant surface mounting 1GA 995 606-001
Heavy-duty surrounding bracket 1GA 995 606-071
Long-range illumination
Upright or pendant surface mounting 1GA 995 606-011
Heavy-duty surrounding bracket 1GA 995 606-081
ZEROGLARE illumination
Upright mounting (available from November 2018) 1GA 995 606-1711)
* recommended accessories:
2,000 mm cable with DT connector and bare cable heads
8KB 990 299-011
ZEROGLARE
1)
1) The ZEROGLARE variants boast illumination with special lens optics. The ZEROGLARE system ensures that drivers of oncoming vehicles are not glared. The light/dark cut-off line is very sharp and the light of the ZEROGLARE work lights is directed specifically at the area in front of the vehicle.
Video clip – scan ZEROGLARE, then watch and learn more.
9
Close-range illumination Long-range illumination
Close-range illumination Long-range illumination
Close-range illumination Long-range illumination
WORKLIGHTS
Ultra Beam LED Gen. I
Light output (measured): 2,200 lumens, power requirement: 30 watts, colour temperature: 6,500 kelvins, multivolt, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof / submersible), ECE-R10 approved, high-quality aluminium housing, DT connector*, ADR/GGVS-tested.
Close-range illumination
Upright installation 1GA 995 506-001
Pendant surface mounting 1GA 995 506-011
Heavy-duty surrounding bracket 1GA 995 506-081
Long-range illumination
Upright or pendant surface mounting 1GA 995 506-031
* recommended accessories:
2,000 mm cable with DT connector and bare cable heads
8KB 990 299-011
This LED product has the following features:
Power Beam 1800 compact
Light output (measured): 1,850 lumens, power requirement: 26 watts, colour temperature: 6,500 kelvins, multivolt, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K8 (pressure cleaner-proof / submersible), ECE-R10-approved, heat-conducting plastic housing, total corrosion protection thanks to innovative plastic housing, DT connector*.
Close-range illumination 1GA 996 488-001
Long-range illumination 1GA 996 488-011
* recommended accessories:
2,000 mm cable with DT connector and bare cable heads
8KB 990 299-011
Power Beam 1000 compact
Light output (measured): 1,000 lumens, power requirement: 12 watts, colour temperature: 6,500 kelvins, multivolt, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K8 (pressure cleaner-proof / submersible), ECE-R10-approved, plastic housing, ADR / GGVS-tested, upright / pendant mounting, total corrosion protection thanks to innovative plastic housing, DT connector*.
Close-range illumination 1GA 996 188-501
Long-range illumination 1GA 996 188-511
Reversing lights 2ZR 996 188-521
* recommended accessories:
2,000 mm cable with DT connector and bare cable heads
8KB 990 299-011
This LED product has the following features:
This LED product has the following features:
10
WORKLIGHTS
This LED product has the following features:
Q90 compact LED
Light output (measured): 1,200 lumens, power requirement: 15 watts, colour temperature: 6,500 kelvins, multivolt, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof / submersible), ECE-R10-approved, upright / pendant mounting, total corrosion protection thanks to innovative plastic housing, DT connector*.
Close-range illumination
500 mm cable with open cable ends 1GA 996 284-001
150 mm cable with DT connector, ADR- / GGVSEB-tested
1GA 996 284-081
Long-range illumination
500 mm cable with open cable ends 1GA 996 284-011
150 mm cable with DT connector, ADR- / GGVSEB-tested
1GA 996 284-091
This LED product has the following features:
Oval 100 LED compact
Light output (measured): 1,850 lumens, power requirement: 26 watts, colour temperature: 6,500 kelvins, multivolt, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof / submersible), ECE-R10-approved, total corrosion protection thanks to innovative plastic housing, DT connector*.
Close-range illumination
Upright or pendant surface mounting 1GA 996 761-101
Side hinge 1GA 996 761-171
Long-range illumination
Upright or pendant mounting, without hinge 1GA 996 761-111
Side hinge 1GA 996 761-191
* recommended accessories:
2,000 mm cable with DEUTSCH connector and bare cable heads
8KB 990 299-011
Close-range illumination Long-range illumination
Close-range illumination Long-range illumination
For side mounting
For upright mounting
11
Close-range illumination Long-range illumination
Modul 70 LED Gen. IV
Light output (measured): 2,500 lumens, power requirement: 30 watts, colour temperature: 6,500 kelvins, multivolt, reverse polarity protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof / submersible), ECE-R10 approved, high-quality aluminium housing, upright / pendant mounting.
Close-range illumination
2,000 mm cable 1G0 996 476-001
Flush-mounting 1G0 996 476-121
Long-range illumination
2,000 mm cable 1G0 996 476-011
Flush-mounting 1G0 996 476-041
Extra-wide ground illumination
2,000 mm cable 1G0 996 476-031
Flush-mounting 1G0 996 476-131
This LED product has the following features:
Mounting
Flush-mounting
Modul 90 LED
Light output (measured): 3,400 lumens, power requirement: 36 watts, colour temperature: 6,500 kelvins, multivolt, reverse polarity protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof / submersible), ECE-R10 approved, high-quality aluminium housing, upright / pendant mounting, DT connector*.
Close-range illumination 1G0 996 263-031
Long-range illumination 1G0 996 263-051
* recommended accessories:
2,000 mm cable with DT connector and bare cable heads
8KB 990 299-011
This LED product has the following features:
WORKLIGHTS
Close-range illumination Long-range illumination
12
Close-range illumination Long-range illumination
Modul 70 LED – hand-held searchlight with handle and switch
With this variant of the Modul 70 LED series, HELLA introduces on the market a compact, handheld searchlight boasting a very powerful light output. The handheld searchlight can be used flexibly thanks to the very practical handle. In addition to a switch for continuous operation, the handle also has a touch switch for short-term operation also enabling Morse code. Thanks to its low energy consumption, the Modul 70 handheld searchlights are ideal for use in battery-powered vehicles. The multivolt electronics of the headlamps enable the use in vehicles with 12 and 24 volts of vehicle electric system voltage. Thanks to CoroSafe technology, the Modul 70 LED handheld searchlights are optimally protected against corrosion. Here, the aluminium housing of the work lights is additionally treated with special chemical processes so that it can withstand the toughest conditions.
Colour temperature: 6,500 kelvins, multivolt 9 – 32 volts, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof/ submersible), ECE-R10 approved, DT connector.
Long-range illumination, 2,500 lumens, 30 watts 1H0 996 476-501
Close-range illumination: 2,500 lumens, 30 watts 1H0 996 476-511
Extra long-range illumination, 800 lumens, 13 watts 1H0 996 376-491
This LED product has the following features:
Mounting
Modul 70 LED Gen. 3.2
Light output (measured): 1,800 lumens, power requirement: 20 watts, colour temperature: 6,500 kelvins, multivolt, reverse polarity protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof / submersible), ECE-R10 approved, high-quality aluminium housing.
Close-range illumination
2,000 mm cable with open cable ends 1G0 996 576-031
DT connector* 1G0 996 576-041
Long-range illumination
2,000 mm cable with open cable ends 1G0 996 576-001
DT connector* 1G0 996 576-011
This LED product has the following features:
WORKLIGHTS
Modul 70 LED handheld searchlights with handle and switch comprising 3 high-power LEDs as version with long-range illumination or close-range illumination
Modul 70 handheld searchlight with handle and switch comprising 4 high-power LEDs for extra long-range illumination
Close-range illumination Long-range illumination Extra long-range illumination
13
Modul 70 LED blue
The Modul 70 LED blue was specially developed for sprayers and snow ploughs. Less glare when illuminating spray mist, road salt or snow. In addition, the blue lens improves the nighttime perception of contrast.
Light output (measured): 800 lumens, power requirement: 13 watts, colour temperature: 5,000 kelvins, multivolt 9-32 volts, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof/ submersible), ECE-R10-approved, heat-conducting plastic housing, DT connector*.
Long-range illumination, recommended tilt angle 5°
1G0 996 276-701
* recommended accessories:
2,000 mm cable with DT connector and bare cable heads
8KB 990 299-011
This LED product has the following features:
WORKLIGHTS
Application example
Modul 70 with magnetic base and spiral cable
This variant of the Modul 70 work light is suitable for many application areas thanks to its magnet base and cigarette lighter lead. The magnet base enables flexible positioning on all magnetic surfaces and quick and simple mounting and removal. The spiral cable connection allows optimal work light flexibility and can also be stored neatly in glove compartment.
Light output (measured): 800 lumens, power requirement: 13 watts, colour temperature: 6,500 kelvins, multivolt 9-32 volts, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof/ submersible), ECE-R10-approved, spiral cable with cigarette lighter lead.
Close-range illumination (available from January 2019) 1G0 996 376-631
This LED product has the following features:
Close-range illumination
14
Modul 50 LED
Light output (measured): 800 lumens, power requirement: 15 watts, colour temperature: 6,500 kelvins, multivolt 9-48 volts, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof/ submersible), ECE-R10 approved, high-quality aluminium housing, ADR/GGVS-tested, DT connector*.
Close-range illumination
Upright installation 1G0 995 050-001
Pendant surface mounting 1G0 995 050-011
Long-range illumination
Upright or pendant surface mounting 1G0 995 050-021
* recommended accessories:
2,000 mm cable with DT connector and bare cable heads
8KB 990 299-011
This LED product has the following features:
WORKLIGHTS
166
150
106
75
Mounting
Flush-mounting
Oval 100 LED Gen. II
Light output (measured): 4,000 lumens, power requirement: 56 watts, colour temperature: 6,500 kelvins, multivolt, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof / submersible), ECE-R10-approved, high-quality aluminium housing, ADR/GGVSEB upon request, DT connector*.
Close-range illumination
Upright or pendant surface mounting 1GA 996 761-001
Flush-mounting 1GA 996 761-021
Long-range illumination
Upright or pendant surface mounting 1GA 996 761-011
* recommended accessories:
2,000 mm cable with DT connector and bare cable heads
8KB 990 299-011
This LED product has the following features:
Close-range illumination Long-range illumination
Close-range illumination Long-range illumination
15
Flat Beam 500
Light output (measured): 550 lumens, power requirement: 7 watts, colour temperature: 6,500 kelvins, multivolt, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof / submersible), ECE-R10-approved, impact-resistant plastic housing,2,000 mm cable with open ends.
Standard 45° downward illumination. The special lens optics enables perfect light projection into work area also for vertical mounting. The structure refracts the light in a downward 45° angle and thus provides good illumination in the direct near field area.
Close-range illumination
Upright mounting, standard bracket 1GA 995 193-001
Pendant mounting, standard bracket 1GA 995 193-011
Upright surface mounting, wall installation 1GA 995 193-021
Upright surface mounting, strap fixing 1GA 995 193-031
Upright surface mounting, wrap-around bracket 1GA 995 193-041
This LED product has the following features:
WORKLIGHTS
Flat Beam 1000
Light output (measured): 1,100 lumens, power requirement: 11 watts, colour temperature: 6,500 kelvins, multivolt, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof / submersible), ECE-R10-approved, impact-resistant plastic housing. Upright mounting, 2,000 mm connection with open cable ends.
Close-range illumination
Wall-mounted 1GD 996 193-001
Wrap-around bracket 1GD 996 193-011
45° illumination.
The special lens optics enables perfect light projection into work area also for vertical mounting. The structure refracts the light in a downward 45° angle and thus provides good illumination in the direct near field area.
Wall-mounted 1GD 996 193-051
This LED product has the following features:
Close-range illumination
Close-range illumination
16
Close-range illumination
LED light bar 350
Light output (measured): 2,200 lumens, power requirement: 25 watts, colour temperature: 5,000 kelvins, multivolt, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7 (pressure cleaner-proof / submersible), ECE-R10-approved, Thermo Pro plastic housing.
Close-range illumination
2,500 mm cable with open cable ends 1GJ 958 040-501
This LED product has the following features:
WORKLIGHTS 17
HELLA VALUEFIT PROVEN QUALITY.
GREAT PRICE.
Especially oriented toward the specific requirements
of the independent aftermarket, the work lights of
the HELLA VALUEFIT range provide the optimal
mix of reliable quality, excellent performance and
competitive pricing.
All HELLA VALUEFIT lamps meet the relevant
technical specifications, are safe and reliable while
enabling affordable repairs. What's more, there is no
need to go without important services.
GOING STRONG
FOR A POWERFUL PERFORMANCE
The HELLA VALUEFIT work lights not only impress
with their various designs but also their light output.
Equipped consistently with energy-efficient, bright
LED technology, the work lights and their up to 5,500
lumens provide outstanding workplace illumination.
Whether opting for the round or square housing
shape - or the extra-flat light bar, the robust
HELLA VALUEFIT headlamps are the ideal
partner for many application fields in the area of
agricultural and construction machinery as well
as trucks and trailers.
This LED product has the following features:
Close-range illumination
R900 LED
Light output (measured): 900 lumens, power requirement: 9 watts, protection type: IP 67 and IP 6K9K, aluminium housing, multivolt: 10-30 volts, polarity reversal protection, ECE-R10-approved.
Close-range illumination – upright and pendant mounting
800 mm cable with open cable ends 1G0 357 108-012
133
107 41,5
WORKLIGHTS
S800 LED
Light output (measured): 800 lumens, power requirement: 9 watts, protection type: IP 67 and IP 6K9K, aluminium housing, multivolt: 10-30 volts, polarity reversal protection, ECE-R10-approved and ECE-R23 reversing light-approved.
Close-range illumination – upright and pendant mounting
800 mm cable with open cable ends 1GA 357 107-012
3,000 mm cable with open cable ends 1GA 357 107-022
129
100 40
Close-range illumination
This LED product has the following features:
20
This LED product has the following features:
This LED product has the following features:
Close-range illumination
S1500 LED
Light output (measured): 1,500 lumens, power requirement: 15 watts, protection type: IP 67 and IP 6K9K, aluminum housing, multivolt: 10-30 volts, polarity reversal protection, ECE-R10-approved.
Close-range illumination – suspended and pendant mounting ECE-R23 reversing light-approved
800 mm cable with open cable ends 1GA 357 103-012
3,000 mm cable with open cable ends 1GA 357 103-022
With handle and switchClose-range illumination – upright and pendant mounting ECE-R23 reversing light-approved
DEUTSCH connector 1GA 357 103-082
129
100 40
WORKLIGHTS
R1500 LED
Light output (measured): 1,500 lumens, power requirement: 15 watts, protection type: IP 67 and IP 6K9K, aluminium housing, multivolt: 10-30 volts, polarity reversal protection, ECE-R10-approved.
Close-range illumination – upright and pendant mounting
800 mm cable with open cable ends 1G0 357 101-012
133
107 41,5
Close-range illumination
21
This LED product has the following features:
This LED product has the following features:
Close-range illumination
137
108 48S2500
Light output (measured): 2,500 lumens, power requirement: 25 watts, protection type: IP 67 and IP 6K9K, aluminium housing, multivolt: 10-30 volts, polarity reversal protection, ECE-R10-approved.
Close-range illumination – suspended and pendant mounting ECE-R23 reversing light-approved
800 mm cable with open cable ends 1GA 357 106-022
3,000 mm cable with open cable ends 1GA 357 106-032
137
114 41,5R2200
Light output (measured): 2,200 lumens, power requirement: 25 watts, protection type: IP 67 and IP 6K9K, aluminium housing, multivolt: 10-30 volts, polarity reversal protection, ECE-R10-approved.
Close-range illumination – upright and pendant mounting
800 mm cable with open cable ends 1G1 357 105-022
Close-range illumination
WORKLIGHTS22
This LED product has the following features:
WORKLIGHTS
S3000 LED
Light output (measured): 3,000 lumens, power requirement: 31 watts, protection type: IP 67 and IP 6K9K, aluminium housing, multivolt: 10-52 volts, polarity reversal protection, ECE-R10-approved, 800 mm cable.
Large-area terrain illumination
800 mm cable, DT connector enclosed 1GA 357 109-002
Close-range illumination
LBX LED Light bars
Light output (measured): up to 5,500 lumens, 9 - 32 volts, polarity reversal protection, overvoltage protection, IP 67 and IP 6K9K, ECE-R10-approved, aluminium housing, DT connector*, upright / pendant mounting.
Close-range illumination
LBX-220 LED, 1,000 lumens, 22 watts 1GE 360 000-002
LBX-380 LED, 2,000 lumens, 44 watts 1GJ 360 001-002
Long-range illumination
LBX-540 LED, 3,500 lumens, 66 watts 1GJ 360 002-002
LBX-720 LED, 5,500 lumens, 88 watts 1GJ 360 003-002
* recommended accessories:
2,000 mm cable with DT connector and bare cable heads
8KB 990 299-011
LBX-220 LED
LBX-380 LED
LBX-540 LED
LBX-720 LED
80
98
M8
80
98
M8
80
98
M8
80
98
M8 min 739 - max 759
704
min 574 - max 594
539
min 409 - max 429
374
min 244 - max 264
209
Close-range illumination Long-range illumination
LBX-220 LED LBX-540 LED
LBX-380 LED LBX-720 LED
This LED product has the following features:
23
WORKLIGHTS
HELLA VISIOTECH PROJECTION TECHNOLOGY
The new VISIOTECH projection technology from HELLA provides you with a means of communicating with light. This technology
uses light to project various symbols and types of illumination onto the ground. The result is more safety, comfort and convenience
during the daily work routine.
For the SL60 warning light, a special lens optic allows the light rays to converge so much that and a strip-shaped warning line is
projected onto the ground. Depending on the type of mounting, the warning line can be projected in front of the vehicle either
horizontally or vertically. This application serves to warn other vehicles or pedestrians of an oncoming vehicle. The lines projected in
front of a vehicle can, however, also be used as a means of simpler vehicle navigation.
But in both instances, occupational safety and also comfort and convenience are significantly ramped up and consequently
accidents are prevented from the outset.
Models of the SL60 LED warning light are available either with a red projection line or with a blue one, options which make it
suitable for the most diverse kinds of applications and target groups.
Application examples
Modul 50 LED spot
Power requirement: 15 watts, multivolt 9 – 52 V, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K8 (pressure cleaner-proof/ submersible), ECE-R10 approved, high-quality aluminium housing, ADR/GGVS-tested, DT connector*.
The new Modul 50 LED spot series by HELLA greatly contributes to workplace safety. These headlamps feature a special lens technology bundling light so much that a circular warning spot is projected onto the ground. Depending on the surface, colours white, blue, green or red are preferable.
White 1G0 995 050-051
Blue 1G0 995 050-061
Green 1G0 995 050-071
Red 1G0 995 050-081
* recommended accessories:
2,000 mm cable with DT connector and bare cable heads
8KB 990 299-011
This LED product has the following features:
24
WORKLIGHTS
SL60 LED
Compact warning light. A special lens optic allows the light rays bundles the light so much that a strip-shaped warning line is projected onto the ground. This allows alerting other vehicles and pedestrians. The lines can, however, also be used as a means for simpler vehicle navigation.
Power requirement: 8 watts, multivolt: 10-80 volts, ECE-R10-approved, connection: 1000 mm cable with open cable ends.
Illumination
Blue 1G0 996 210-001
Red 1G0 996 210-011
This LED product has the following features:
6370
M8 35
77
99
Application examples
The Modul 50 LED spot warning light projects a circular warning point on the ground. Once again, a special lens optic bundles the
LED light so much that a circular warning spot is projected onto the ground. This application is suitable for a wide variety of areas
(e.g. forklifts). Thanks to its compact dimensions, the Modul 50 LED spot is particularly well-suited when little space is available for
installation. These headlamps are used especially as warning lights to visually warn other vehicles or pedestrians about an
oncoming vehicle. But it can also be used for optically marking certain areas. The Modul 50 LED spot warning light is available in
the colours blue, green, red, and white.
Using the SL60 LED and Modul 50 LED spot warning light is permitted for applications outside the StVZO. For special applications
on the road, special permits are required.
25
REVERSING LIGHTS
Modul 70 LED reversing light
800 lumens, power requirement 13 watts, colour temperature 6,500 kelvins, extra-wide close-range illumination, IP 6K9< / IP 6K7 (presser cleaner-proof / submersible), upright/pendant mounting, high-quality aluminium housing with CoroSafe coating, ECE-R10- and ECE-R23-approved
2000 mm cable with open cable ends 2ZR 996 376-091
This LED product has the following features:
Power Beam 1000-compact reversing light
Light output (measured): 1,000 lumens, power requirement: 12 watts, colour temperature: 6,500 kelvins, multivolt, polarity reversal protection, overvoltage protection, thermal management, IP 6K9K / IP 6K8 (pressure cleaner-proof / submersible), ECE-R10- and ECE-R23-approved, plastic housing, ADR / GGVS-tested, upright / pendant mounting, DT connector.
DEUTSCH connector 2ZR 996 188-521
* recommended accessories:
2,000 mm cable with DT connector and bare cable heads
8KB 990 299-011
This LED product has the following features:
Close-range illumination
Close-range illumination
26
REVERSING LIGHTS
This LED product has the following features:
Q90 compact LED reversing light
1,000 lumens, power requirement: 15 watts, colour temperature: 5,000 kelvins, IP 6K9K / IP 6K7 (pressure cleaner-proof/ submersible), heat-conducting plastic housing, total corrosion protection thanks to innovative plastic housing, upright / pendant mounting, ECE-R10- and ECE-R23-approved.
2000 mm cable with open cable ends 2ZR 996 284-501
500 mm cable and DT connector, ADR- / GGVSEB-tested
2ZR 996 284-511
Repulse Pro reversing light
870 lumens, power requirement: 11 watts, colour temperature: 5,500 kelvins, IP 6K9K / IP 6K7 (pressure cleaner-proof, submersible), heat-conducting plastic housing, total corrosion protection thanks to Thermo Pro technology, upright/pendant mounting, ECE-R10- and ECE-R23-approved.
AMP-SUPERSEAL connector (2-pin) with 2,000 mm cable and open cable ends
2ZR 012 456-201
EasyConn connector (2-pin) with 1,000 mm cable and open cable ends
2ZR 012 456-211
6.3 mm flat receptacles with 3,500 mm cable with open cable ends
2ZR 012 456-221
This LED product has the following features:
Close-range illumination
Close-range illumination
27
Accessories
Product photo Description Part number
Bracket
Pipe socket fixing bracketFor combination with socket tubes 8HG 002 365-001. Suitable for mounting with 42 mm bracket width. Electrical contacting within the pipe socket via socket according to DIN 7 2 591.
With AMP connector or grommetModel series: Halogen: Ultra Beam, Mega Beam and Oval 100
8HG 990 320-001
with DT or grommetModel series: LED: Ultra Beam, Oval 100, Power Beam, and Modul 90Halogen: Ultra Beam
8HG 990 320-011
Mirror bracket attachmentRotatable universal bracket for mounting on tubes/pipes (diameter: 15-25 mm). For replacement on work lights with 36 mm or 42 mm bracket width.
36 mm bracket widthModel series: Oval 90, Module 70 and Flat Beam 500
8HG 990 263-111
42 mm bracket widthModel series: Ultra Beam, Mega Beam, Oval 100, Power Beam, Modul 90, Q90 LED and AP 1200 LED
8HG 990 263-131
Magnetic mounting bracketFor worklights with U-bracket. Contains 2 magnets and fastening materials.
Model series: All worklights with standard bracket
8HG 004 806-001
Four-point mountingMade from yellow chrome-plated steel
Model series: All worklights with standard bracket
9XD 990 298-001
Four-point mountingMade from stainless steel with oblong holes
Model series: All worklights with standard bracket
9XS 130 261-001
Angle bracketAngle attachment for work lights with 42 mm bracket width
Model series: Ultra Beam, Mega Beam, Oval 100, Power Beam, Modul 90, Q90 LED and AP 1200 LED
9XD 990 298-031
Plastic bracketGlass fibre-reinforced standard bracket for work lights
Model series: Ultra Beam, Mega Beam, Oval 100, Power Beam, Modul 90, Q90 LED and AP 1200 LED
42 mm bracket width 8HG 332 912-002
Standard bracket With extra space to the rear
Model series: Ultra Beam, Mega Beam, Oval 100, Power Beam, Modul 90, Q90 LED and AP 1200 LED
42 mm bracket width 8HG 992 377-042
Oblong hole bracketSpecial bracket with oblong hole for mounting
Model series: Oval 90, Module 70 and Flat Beam 500
36 mm bracket width 8HG 331 414-372
Forked bracketSpecial bracket for flush assembly
Model series: Oval 90, Module 70 and Flat Beam 500
36 mm bracket width 8HG 994 412-372
Standard bracket with eyeStandard bracket for extensions with restricted space to the rear
Model series: Ultra Beam, Mega Beam, Oval 100, Double Beam, AS 200, Power Beam, Module 90, Q90 LED and AP 1200 LED
42 mm bracket width 8HG 994 974-002
REVERSING LIGHTS28
Accessories
Plugs
The comprehensive product range of HELLA accessories for connector connections offers solutions for virtually every application area. Unwanted failures are frequently caused by faulty wiring, not the products themselves. The HELLA SUPERSEAL product range enables a waterproof and dustproof connection of the cable ends, therefore offering optimal working conditions in all kinds of weather.
DT connector set, 2-pin 8JA 201 022-801
DT connector set, 6-pin 8JA 201 022-831
AMP connector set (consisting of AMP connector and recessed-mounting grommet)
8JD 990 295-037
HB3 connector (10 units) 8JA 990 295-217
H9 connector (20 units) 8JD 158 175-807
SUPERSEAL, assortment case comprising various SUPERSEAL plug housings, pin/socket contacts, individual conductor seals and blind connectors (780 parts)
8JA 009 256-801
Cables
HELLA supplies various adapter cables as accessories for easy installation of headlamps.
2,000 mm cable with AMP connector and bare cable heads 8KB 990 299-001
2,000 mm cable with DEUTSCH connector and bare cable heads 8KB 990 299-011
2,000 mm cable with H9 connector, bare cable heads and rubber cap
8KB 990 299-311
2,000 mm cable with HB3 connector and bare cable heads 8KB 990 299-331
200 mm adapter cable from DEUTSCH to AMP connector 8KB 990 299-361
230-volt power supply (suitable for headlamps up to max. 45 watts) 8EN 332 584-001
REVERSING LIGHTS 29
HELLA BEACONS
Stay on the safe side – with HELLA beacons
Whenever a special optical warning against dangerous situations is required, beacons are in the limelight. This does
not only apply to rescue missions but also during assignments with large, heavy and/or slow vehicles, such as
harvesters or heavy-duty transporters. HELLA beacons have a powerful warning effect and thus signal to the other
road users: please be careful – work is going on all around this vehicle. Our beacons therefore do their part in providing
more safety. This safety is also achieved by the optimal light bundling and distribution, the long range achieved and
also the very high luminous intensity of the applied LED technology.
HELLA beacons are furthermore characterised by outstanding quality when it comes to workmanship and
stability – and their long service life proves it.
Don't leave safety up to chance – trust HELLA beacons.
BEACONS
This LED product has the following features:
KL 7000 LED
The KL 7000 LED is the logical development of the popular KL 700 and KL 7000 series. The beacon is characterised by its flat and compact design, long service life, and a high degree of efficiency in converting electric power into light. It allows an easy changeover from halogen to LED.
Fixed, rotating 2RL 011 484-001
Pipe socket, rotating 2RL 011 484-011
Magnet, rotating 2RL 011 484-021
Fixed, flashing 2XD 012 972-001
Pipe socket, flashing 2XD 012 972-011
Magnet, flashing 2XD 012 972-021
Type approval: ECE-R10, ECE-R65, SAE J845 Class 2
165±0.5
193.
9±5
75
ø30
165
118.
9
Pipe socket mounting
Fixed attachment
This LED product has the following features:
ROTA LED COMPACT
The RotaLED Compact is the LED successor to the existing Rotafix, Rotaflex and Rota Compact halogen beacon series. These can be replaced 1:1. No moving parts are required for the LED functions – so no wear and maximum reliability. Since LEDs are maintenance-free, they do not cause any additional costs for spare parts or maintenance. Downtimes are reduced to a minimum. The beacon is available in three different mounting versions. Flexible base protects from branch impact: the beacon bends and always returns to its original position. Now also available as rotating version.
Fixed, rotating 2RL 014 979-001
Pipe socket Flex, rotating 2RL 014 979-011
Magnet, rotating 2RL 014 979-021
Fixed, flashing 2XD 013 979-001
Pipe sockets Flex, flashing 2XD 013 979-011
Magnet, flashing 2XD 013 979-021
Type approval: ECE-R10, ECE-R65, SAE J845 Class 2
Magnetic attachment
Fixed attachment
84,8
±0,
5
Ø165,2 ±1
Ø138,8 ±1
118
±1
Ø5,5 (3x)
Ø150 ±0,5
Ø5,5 (3x)
Ø10 min Ø130 ±0,5
20°
120°
(3x)
120° (3x)
Pipe socket mounting Flex
118
±1
164
±1
165 ±1
84,8
±0,
5
Ø165 ±1
Ø138,8 ±0,5
130
±1
131.
2
ø165
31
BEACONS
This LED product has the following features:
K�LED BLIZZARD
The K-LED Blizzard is the successor generation to the popular and widespread K-LED FO. These can be replaced like-for-like. The new generation combines its predecessor's popular design with the latest LED technology. Alongside functional control, this beacon boasts the option of synchronising up to four beacons with one another. The beacon is available in three different mounting versions and has a flashing light function.
Fixed, flashing 2XD 012 980-001
Pipe sockets Flex, flashing 2XD 012 980-011
Magnet, flashing 2XD 012 980-021
Type approval: ECE-R10, ECE-R65, SAE J845 Class 2
Magnetic attachment
Pipe socket mounting Flex
Fixed attachmentØ 4,1 (3X)
Ø 130120° (3
X)20°
83,6
±1
132
±1,5
149 ±1
83,6
±1,5
95,5
±1,5
148,3 ±1
39 ±1
88 ±1
,5
ROTA LED
The Rota LED with rotating or flashing LED light function is impressive due to its high efficiency and its flat compact design. Due to the shock-absorbing rubber foot, it boasts a high resilience against vibration and is perfectly suited for challenging applications.
Fixed, rotating 2RL 010 979-001
Pipe socket Flex, rotating 2RL 010 979-011
Magnet, rotating 2RL 010 979-021
Fixed, flashing 2XD 012 878-001
Pipe sockets Flex, flashing 2XD 012 878-011
Magnet, flashing 2XD 012 878-021
Type approval: ECE-R10, ECE-R65, SAE J845 Class 2
This LED product has the following features:
ø55
ø135
29
5546
183
132
135
124.
142
.5
ø130ø3.5
R73.5
132
126.
144
.542
.5
135
R50.5
R73.5Magnetic attachment
Pipe socket mounting Flex
Fixed attachment
32
BEACONS
K�LED 2.0
The K-LED 2.0 is the first HELLA beacon where you can choose between rotating or flashing warning signals. Thanks to an integrated light sensor, switching between day and night mode happens automatically. This guarantees you the greatest warning effectiveness. Extremely flat design and impact-resistant dome. Radio signals are not disrupted by the K-LED 2.0.
Fixed mounting with silver base 2XD 011 557-101
Fixed mounting with black base 2XD 011 557-841
Pipe socket with silver base 2XD 011 557-201
Pipe socket with black base 2XD 011 557-811
Magnet with silver base 2XD 011 557-301
Type approval: ECE-R65, ECE-R10, SAE J845 Class 1
This LED product has the following features:
ø130ø150
20º169.3
87.6
ø165
160.
6
Magnetic attachment
Pipe socket mounting
Fixed attachment
K�LED 1.2
The K-LED 1.2 is an innovative expansion to the K-LED family. It is available in rotating and flashing versions. The dual lighting system in the K-LED 1.2 produces a larger light exit area, making it especially effective at providing a warning function. And the K-LED 1.2 needs no moving parts – replacement of wearing parts is unnecessary. As a result, the beacon features a long service life. The shock-resistant dome made of polycarbonate guarantees particularly reliable protection against impacts (e.g. from branches). Wireless signals are not disrupted by the K-LED 1.2 because it has a high resistance to electromagnetic interference and therefore EMC.
Fixed, rotating 2RL 012 983-301
Pipe socket, rotating 2RL 012 983-401
Fixed, flashing 2XD 012 984-301
Pipe socket, flashing 2XD 012 984-401
Type approval: ECE-R10, ECE-R65, SAE J845 Class 2
This LED product has the following features:
1600
±10
21
Ø146 ±0,5
85 ±1
115,
5 ±1
,5
123
±1,5
Ø6 ±0,1
Ø164,7 ±1
Ø169,3 ±1
Ø6
120°
(x3)
Ø150 ±0,5
Ø130 ±0,5
20°
42,8°
Fixed attachment
Ø 169,5 ±0,5
196,
5 ±1
146 ±1
115,
5 ±1
,5
85 ±1
125,
5 ±1
,5
Pipe socket mounting
33
BEACONS
Accessories
Product photo Description Part number PU
Socket pipe to weld on, straight, 100 mm long, with rubber stopper and socket according to DIN 14620
1-pin8HG 002 365-001
2-pole8HG 006 294-101
1
Socket pipe with screw-on base, total height 126 mm, with rubber stopper and socket according to DIN 14620
1-pin8HG 006 294-011
2-polepossible on request
1
Angled socket pipe with lateral screw-on base, clearance 90 mm, height 100 mm including rubber stopper, socket , 2 x hexagon screws M8 x 35, 2 x hexagon nuts M8, 2 x spring washers compliant with DIN 14620
1-pin8HG 006 294-021
2-polepossible on request
1
Angled socket pipe with lateral screw-on base, clearance 50 mm, height 100 mm including rubber stopper, socket , 2 x hexagon screws M8 x 35, 2 x hexagon nuts M8, 2 x spring washers compliant with DIN 14620
1-pin8HG 006 294-111
2-polepossible on request
1
Rotatable socket pipe, height approx. 105 mm incl. rubber stopper, socket, 2 x hexagon screws M8 x 35, 2 x hexagon nuts M8, 2 x spring washers according to DIN 14620
1-pin8HG 006 294-031
2-pole8HG 006 294-141
1
Socket pipe with screw attachment, height approx. 100 mm, with rubber stopper and socket according to DIN 14620
1-pin8HG 006 294-051
2-pole8HG 006 294-091
1
Socket pipe with 2 screw holes for attaching it to the rear of the cab, with telescope bracket, total height approx. 1,000 mm, Can be shifted up to 700 mm, with rubber stopper and socket according to DIN 14620
1-pin8HG 006 294-041
2-polepossible on request
1
Socket pipe to weld on, straight, height 100 mmCompatible with 8HG 002 365-001 / 8HG 006 294-101
8HG 096 531-007 2
Socket pipe, straight with screw-on base, total height 126 mm compatible with 8HG 006 294-011 / -121
8HG 096 531-107 2
Angled extension tube, with base for screwing onto side, clearance 90 mm Compatible with 8HG 006 294-021 / -221
8HG 096 531-117 2
Angled socket pipe, with base for screwing onto side, clearance 50 mm Compatible with 8HG 006 294-111 / -211
8HG 096 531-127 2
Swiveling extension tube, height approx. 105 mm compatible with 8HG 06 294-031 / -141
8HG 096 531-137 2
34
BEACONS
Installation examples
Socket pipe with base for screw attachment
Angled extension tube, with base for screwing onto side
Support pipe, pivotingSocket pipe for screw attachment
Product photo Description Part number PU
2-pole socket with cap, with 2 blade couplings 6.3 mm
8JB 004 777-001*8JB 004 777-002*
51
2-pole socket with cap, with 300 mm cable 2.5 mm2 and 2 blade couplings 6.3 mm
8JB 001 946-101* 1
2-pin aluminium alloy socket with cap and 1 screw connection, mass on housing
8JB 001 946-021* 10
2-pole socket with cap and 2 blade couplings 6.3 mm 8JB 004 123-031* 1
1-pin round socket with fillister head screw M4 x 8 8JB 850 434-011* 10
1-pin socket with cap 8JB 001 946-011* 10
12 V, test equipment to monitor the function of rotating beacons and flashing beacons, indicates the failure of a beacon
5KG 011 630-101 1
Rubber stopper /cap according to DIN 146209GH 096 532-0019GH 096 532-007
10200
* Sockets comply with DIN ISO 4165; installation opening: Ø 18.5 mm, control panel thickness max. 7 mm.
Accessories
35
WARNING LIGHTS
This LED product has the following features:
BST – FOR HORIZONTAL MOUNTING
Optimum signaling effect thanks to the combination of three power LEDs and a high-grade precision lens. Flat, compact design. In addition to steady light, a total of four flashing patterns (simple, double, triple and quadruple flash) can be set as synchronous or alternating signals. Power consumption 7-14 watts.
Fixed attachment
Blue (1 level), 2 units 2XD 014 561-001
Amber (1 level), 2 units 2XD 014 561-201
Red (1 level), 2 units 2XD 014 561-601
Holding attachment
Blue (1 level), 2 units 2XD 014 561-101
Amber (1 level), 2 units 2XD 014 561-401
Red (1 level), 2 units 2XD 014 561-701
Lighting homologation standard: ECE-R65 XA1, XB1, XR1
EMC: ECE-R10, CISPR 25 class 3
K-approved (§ 53a StVZO) only for yellow versions
Please observe the statutory mounting provisions. Use only to such an extent as is legally permitted. Mounting only at the side or to the rear.Front mounting requires special approval from the responsible regional authority.
BST�SLIM
Optimum signaling effect thanks to the combination of power LEDs and a high-grade precision lens. Especially flat and compact design (construction height 12.8 mm). In addition to steady light, a total of four flashing patterns (simple, double, triple and quadruple flash) can be set as synchronous or alternating signals. (Available from November 2018) Horizontal installation
With 6 LEDs, power consumption 13-17 watts (day-/nighttime mode)
Blue, 2 units 2XD 014 562-001
Amber, 2 units 2XD 014 562-201
Red, 2 units 2XD 014 562-601
With 3 LEDs, power consumption 6-9 W (1 level)
Blue, 2 units 2XD 014 563-001
Amber, 2 units 2XD 014 563-201
Red, 2 units 2XD 014 563-601
Vertical installation
With 6 LEDs, power consumption 13-17 watts (day-/nighttime mode)
Blue, 2 units 2XD 014 592-001
Amber, 2 units 2XD 014 592-201
Red, 2 units 2XD 014 592-601
Lighting homologation BST-Slim 3 LED: ECE-R65 XA1, XB1, XR1
Lighting homologation BST-Slim 6 LED: ECE-R65, XA2, XB2, XR2
EMC: ECE-R10, CISPR 25 class 5
K-approved (§ 53a StVZO) only for yellow versions
This LED product has the following features:
132 ±0,6
2,8
±0,7
32 ±
0,4
89,3 ±0,6
32 ±
0,4
12,8
±0,
713
2 ±0
,6
12,8 ±0,7
32 ±0,4
85,98 ±0,8
15,91 ±0,8
27,6
6 ±1
77,28 ±0,5
64.55 ±0,5
22.1
1 ±0
,8
Fixed attachment
Holding attachment
36
WARNING LIGHTS
This LED product has the following features:
BST-V – FOR VERTICAL MOUNTING
Optimum signaling effect thanks to the combination of six power LEDs and a high-grade precision lens. Flat, compact design. In addition to steady light, a total of four flashing patterns (simple, double, triple and quadruple flash) can be set as synchronous or alternating signals. Power consumption 7-14 watts.
Fixed attachment
Amber (1 level), 2 units 2XD 012 160-951
Blue (1 level), 2 units 2XD 012 160-901
Holding attachment
Amber (1 level), 2 units 2XD 012 160-961
Blue (1 level), 2 units 2XD 012 160-911
Lighting homologation standard: ECE-R65 XA1, XB1
EMC: ECE-R10, CISPR 25 class 5
K-approved (§ 53a StVZO) only for yellow versions
Please observe the statutory mounting provisions. Use only to such an extent as is legally permitted. Mounting only at the side or to the rear.Front mounting requires special approval from the responsible regional authority.
Fixed attachment
119,93 ±0,5
127,45 ±0,8
27,82 ±1
17,61 ±0,8
Holding attachment
This LED product has the following features:
BST – FOR HORIZONTAL MOUNTING
Optimum signaling effect thanks to the combination of six power LEDs and a high-grade precision lens. Flat, compact design. In addition to steady light, a total of four flashing patterns (simple, double, triple and quadruple flash) can be set as synchronous or alternating signals. Power consumption 7-14 watts.
Fixed attachment
Blue (day-time/night-time level), 2 units 2XD 014 560-001
Blue (1 level), 2 units 2XD 012 160-801
Amber (day-time/night-time level), 2 units 2XD 014 560-201
Amber (1 level), 2 units 2XD 012 160-851
Red (1 level), 2 units 2XD 012 160-821
Holding attachment
Blue (day-time/night-time level), 2 units 2XD 014 560-101
Blue (1 level), 2 units 2XD 012 160-811
Amber (day-time/night-time level), 2 units 2XD 014 560-401
Amber (1 level), 2 units 2XD 012 160-861
Red (1 level), 2 units 2XD 012 160-831
Lighting homologation standard: ECE-R65 XA1, XB1, XR1, CISPR 25 class 5
Lighting homologation Tag- / nighttime mode: ECE-R65 XA2, XB2, CISPR 25 class 3
EMC: ECE-R10, CISPR 25 classes 3 or 5
K-approved (§ 53a StVZO) only for yellow versions
Please observe the statutory mounting provisions. Use only to such an extent as is legally permitted. Mounting only at the side or to the rear.Front mounting requires special approval from the responsible regional authority.
107,11 ±0,8
22,1
1 ±0
,5
Holding attachment
Fixed attachment
119,93 ±0,5
127,45 ±0,8
27,8
2 ±1
17,61 ±0,8
107,11 ±0,8
22,11 ±0,5
37
HELLA FRONT LIGHTING
Look forward – with front lighting solutions from HELLA
Without power headlamps, nothing moves – neither on the road nor on the field. They are, so to speak, the eyes of the
vehicle and therefore an important safety feature when driving and working at night. The HELLA 90 mm front lighting
modules are specially attuned to the requirements of commercial and agricultural vehicles and are useful for virtually
all vehicles and situations due to their functional flexibility. The modules are small but powerful. Thanks to their
modular concept, they provide a high degree of flexibility allowing for many application areas especially in commercial
and agricultural vehicles.
The future-proof HELLA upgrade concept allows retrofitting the traditional halogen modules with efficient powerful
LED technology, which already characterises a large proportion of the modules.
90 mm modules
Range overview
LED Halogen
(conventional lighting technology)
Ma
in l
igh
t fu
nct
ion
s
� Low beam and high beam (bi-modules)
� Low beam
� Low beam with daytime running and position light
� High beam
� High beam with daytime running and position light
� Dipped beam and indicator
� Low beam and high beam (bi-modules)
� Low beam
� High beam
� High beam and position light
Au
xil
iary
lig
ht
fun
ctio
ns � Fog light
� Fog light and cornering light
� Fog light, daytime running light and position light
� Daytime running lights
� Daytime running light and position light
� Indicator, daytime running light and position light
� Fog light
� Fog light and cornering light
� Fog and daytime running light
� Daytime running light and position light
� Position light
� Indicator and position light
� Direction indicator
� For diverse applications and the highest demands
� Maximum design and technological freedom thanks to modular system
� More illumination and safety with innovative LED technology
In our 90 mm configurator, you can design and put together your own front lighting.
This process is aided by a simple menu guide. This results in a parts list, which
you can then send to HELLA directly from the tool.
www.hella.com/90mm-modules
90 mm modules
Configuration tool
FRONT LIGHTING 39
L 4060 LED low-beam headlamp*
Module headlamp with 40 x 60 mm polycarbonate lens, robust aluminium pressure die-cast housing, silver design cover (black design cover upon request), multivolt 9-32 volts.
Right-hand traffic/SAE version, FEP connector 1BL 012 488-0011)
Left-hand traffic, FEP connector 1ML 012 488-011
Right-hand traffic/SAE version, DT connector 1BL 012 488-1011)
Left-hand traffic, DT connector 1ML 012 488-111
Type approval: ECE-R112, ECE-R10, 1BL 012 488-001: 3831, 1ML 012 488-011: 4090, 1BL 012 488-101: 3881, 1ML 012 488-11: 4090
b) LED low beam headlamp L 4060 with daytime running /position light*
Module headlamp with 40 x 60 mm polycarbonate lens, robust aluminium pressure die-cast housing, silver design cover (black design cover upon request), multivolt 9-32 volts.
Right-hand traffic/SAE version, FEP connector 1BL 012 488-0211)
Left-hand traffic, FEP connector 1ML 012 488-031
Right-hand traffic/SAE version, DT connector 1BL 012 488-1211)
Left-hand traffic, DT connector 1ML 012 488-131
Type approval: ECE-R112, R87, R7, ECE-R10, 1BL 012 488-021: 3831, 1ML 012 488-031: 4090, 1BL 012 488-121: 3881, 1ML 012 488-131: 4090
90 mm: L 4060 LED low beam
This LED product has the following features:
Uniform illumination similar to daylight. Low beam,
daytime running light and position light in one module
or as a separate low beam. 40 x 60 mm polycarbonate
lens for a new design. Mounting points as for
Performance module, enabling like-for-like replacement.
Optionally FEP or DT connector. Hardened plastic cover lens.
Integrated electronics, robust aluminium pressure die-cast
housing, multivolt: 9-32 volts.
Exact adjusting screw for premium and performance mounting
included with delivery.
Performance module mounting
for like-for-like conversion of
existing halogen versions
143
22,4
14,733,9
Ø90
3
114,
2
114,2
* In areas where the ECE-R48 regulation applies, vehicles registered in accordance with ECE-R48, series 05 must incorporate suitable measures to safeguard active failure monitoring of an LED headlamp in the vehicle electrical system. For vehicles that are registered in accordance with ECE-R48, series 06, the failure monitor is no longer mandatory.
A 3A fuse from HELLA is required for all LED headlamps. A fuse of > 3A is not sufficient to safely interrupt the power supply in the event of a fault. If the degree of protection is unknown, an external safety switch (e.g. 8JD 743 557-021) must also always be used. If water gets in, incorrect protection can lead to damage ranging from melting to burning of the product.
1)
FRONT LIGHTING40
FRONT LIGHTING
LED spotlight L 4060
Module headlamp with 40 x 60 mm polycarbonate lens, robust aluminium pressure die-cast housing, silver design cover (black design cover upon request), multivolt 9-32 V.
Pre-mounted carrier frame 1F0 011 988-021
Performance mount 1F0 011 988-121
Type approval: ECE-R112, ECE-R10, 3831
L 4060 LED high-beam headlamp, with daytime running light/position light
Module headlamp with 40 x 60 mm polycarbonate lens, robust aluminium pressure die-cast housing, silver design cover (black design cover upon request), multivolt 9-32 volts.
Pre-mounted carrier frame 1F0 011 988-031
Performance mount 1F0 011 988-131
Type approval: ECE-R112, R87, R7, ECE-R10, 3831
L 4060 LED high-beam headlamp, with direction indicator
Module headlamp with 40 x 60 mm polycarbonate lens, robust pressure aluminium die-cast housing, silver design cover (black design cover upon request), multivolt 9-32 volts.
Pre-assembled carrier frame, with pulse generator* 1F0 011 988-081
Pre-assembled carrier frame, without pulse generator* 1F0 011 988-071
Performance attachment, with pulse generator* 1F0 011 988-181
Performance attachment, without pulse generator* 1F0 011 988-171
Type approval: ECE-R112, R6, ECE-R10, 3831
* SAE only up to vehicle width of 2,032 mm.
90 mm: L 4060 LED high beam
This LED product has the following features:
High-end illumination. High beam, daytime running and
position lights in one module, one high beam/direction
indicator combination or high beam as a separate
module. 40 x 60 mm polycarbonate lens for a new
design. Pattern-free and hardened plastic cover lens.
High beam headlamp with either pre-mounted carrier frame or
as a 90 mm Performance module mount, enabling like-for-like
replacement. Integrated FEP connector and driver electronics.
Robust pressure die-cast aluminium housing, multivolt,
9-32 volts.
85
85
Ø14(4x)
Ø6.5(6x)
52
51
52
50
With pre-mounted carrier frame Performance module mounting
for like-for-like conversion of
existing halogen versions
314.8
33.4
A 3A fuse from HELLA is required for all LED headlamps. A fuse of > 3A is not sufficient to safely interrupt the power supply in the event of a fault. If the degree of protection is unknown, an external safety switch (e.g. 8JD 743 557-021) must also always be used. If water gets in, incorrect protection can lead to damage ranging from melting to burning of the product.
Pulse generator: Malfunctions of the high beam with direction indicator module can usually be detected with the vehicle control unit. The detection stages are as follows: DI: < 400 mA; HB: < 800 mA. If your control unit cannot detect stage < 400 mA for DI, the pulse generator will increase the amperage in an interval of 100 to 120 ms to simulate the level consistent with a standard 12 volts (21 watts) bulb.
41
FRONT LIGHTING
With pre-mounted carrier frame
1N0 011 988-001
1N0 011 988-011
With preassembled carrier frame
1N0 011 988-051
1N0 011 988-061
LED fog light L 4060
Module headlamp with 40 x 60 mm polycarbonate lens, robust aluminium pressure die-cast housing, silver design cover (black design cover upon request), multivolt 9-32 volts.
Pre-mounted carrier frame 1N0 011 988-001
Type approval: ECE-R19 F3, ECE-R10, 3831
L 4060 LED front fog lamp, with daytime running light and position light
Module headlamp with 40 x 60 mm polycarbonate lens, robust pressure aluminium die-cast housing, silver design cover (black design cover upon request), multivolt 9-32 volts.
Pre-mounted carrier frame 1N0 011 988-011
Type approval: ECE-R19 F3, R87, R7, ECE-R10, 3831
L 4060 LED front fog lamp, with cornering light
Module headlamp with 40 x 60 mm polycarbonate lens, robust aluminium pressure die-cast housing, silver design cover (black design cover upon request), multivolt 9-32 volts.
Pre-assembled carrier frame, right 1N0 011 988-061
Preassembled carrier frame, left 1N0 011 988-051
Type approval: ECE-R19 F3, R119, ECE-R10, 3832
90 mm: L 4060 fog light
This LED product has the following features:
Uniform illumination similar to daylight. Fog light in
various combinations or as a separate module, with
daytime running light, position light and cornering light.
40 x 60 mm polycarbonate lens, pattern-free, hardened
cover lens made of plastic, integrated FEP connector
and driver electronics.
Robust pressure die-cast aluminum housing, multivolt,
9-32 volts.
A 3A fuse from HELLA is required for all LED headlamps. A fuse of > 3A is not sufficient to safely interrupt the power supply in the event of a fault. If the degree of protection is unknown, an external safety switch (e.g. 8JD 743 557-021) must also always be used. If water gets in, incorrect protection can lead to damage ranging from melting to burning of the product.
42
FRONT LIGHTING
90 mm: Bi-LED low beams and high beams
L 5570 bi-LED low beam and high beam headlamps2nd generation
Module headlamp with 55 x 70 mm polycarbonate lens, robust aluminium pressure die-cast housing, hardened plastic cover lens, no moving parts, multivolt 9-32 volts.
Right-hand traffic, FEP connector 1AL 012 758-001
Left-hand traffic, FEP connector 1LL 012 758-011
SAE version, FEP connector 1AL 012 758-0211)
Right-hand traffic, DEUTSCH connector 1AL 012 758-101
Left-hand traffic, DT connector 1LL 012 758-111
SAE version, DT connector 1AL 012 758-1211)
Type approval: ECE R112, ECE R10
This LED product has the following features:
2nd generation Bi-LED module with enhanced lighting/electronics. 55 x 70 mm polycarbonate lens, pattern-free hardened plastic
cover lens, no moving parts, passive cooling. FEP and DT connector, SAE version available. Integrated function output for failure
monitor. Multivolt: 9-32 volts.
134,4
120
85
179,2
* In areas where the ECE R48 regulation applies, vehicles registered in accordance with ECE R48, series 05, must incorporate suitable measures to safeguard active failure monitoring of an LED headlamp in the vehicle electrical system. For vehicles that are registered in accordance with ECE-R48, series 06, the failure monitor is no longer mandatory.
** Set versions comprising 1 control unit for function monitoring and 1 first-generation LED headlamp available upon request.
A 3A fuse from HELLA is required for all LED headlamps. A fuse of > 3A is not sufficient to safely interrupt the power supply in the event of a fault. If the degree of protection is unknown, an external safety switch (e.g. 8JD 743 557-021) must also always be used. If water gets in, incorrect protection can lead to damage ranging from melting to burning of the product.
1)
This LED product has the following features:
1ST GENERATION (SINCE 2012)L 70* BI-LED LOW BEAM AND HIGH BEAM HEADLAMPS
Module headlamp with 70 mm DE lens
Right-hand traffic 1AL 010 820-021**
Left-hand traffic 1LL 010 820-031**
Type approval: right-hand traffic: ECE 3351/6189, left-hand traffic: ECE 3352/6189
1ST GENERATION (SINCE 2011)L 70 LED LOW-BEAM HEADLAMP*
Module headlamp with 70 mm DE lens
Right-hand traffic 1BL 010 820-001**
Left-hand traffic 1ML 010 820-011**
Type approval: right-hand traffic: ECE 3359 / 6189, left-hand traffic: ECE 3160 / 6189
43
FRONT LIGHTING
Bi-Halogen® headlampsLow beam and spotlight
Halogen, low beam, and high beam in one headlamp, metal reflectors with clear DE lens. Ideal in combination with the matching spotlights and fog lights. Inc. light source.
12 V, right-hand traffic, H7, ECE 1AL 009 998-001
12 V, left-hand traffic, H7, ECE 1LL 009 998-011
12 V, right-hand traffic, H9, SAE 1AL 009 998-021
24 V, right-hand traffic, H7, ECE 1AL 009 998-041
24 V, left-hand traffic, H7, ECE 1LL 009 998-051
Type approval: ECE-R112, 2484 and 2485
Halogen low beam headlamp
Metal reflectors with clear DE lens. Ideal in combination with the matching spotlights and fog lights. Inc. light source.
12 V, right-hand traffic, H7, ECE 1BL 009 999-001
12 V, left-hand traffic, H7, ECE 1ML 009 999-011
12 V, right-hand traffic, H7, SAE 1BL 009 999-021
24 V, right-hand traffic, H7, ECE 1BL 009 999-041
24 V, left-hand traffic, H7, ECE 1ML 009 999-051
Type approval: ECE-R112, 2486 and 2487
90 mm Premium
High-end illumination. Low beam and high beam from
a single headlamp module. 70 mm DE lens. Pattern-free and
hardened glass cover lens. High-quality aluminium
reflector. Preassembled adjusting screws. Including light
source. Connection using 0.5 m shielded supply cable with
detachable plug connection.
Would you like to combine modules from the Premium and Performance series without having to commit yourself right at the start of the vehicle design process?
Then use the tried-and-trusted Premium carrier frame structure as a basis.
Alongside the complete Premium range, the following modules from the Performance series that are compatible with a Premium carrier frame can also be used.
Information
Premium mountings for Performance headlamps
90 mm high beam with PO, 12 V light bulb 1KO 247 043-117
90 mm high beam with 12 V light bulb 1KO 247 043-127
90 mm low beam with 12 V light bulb,Right-hand traffic 1BL 247 042-177
Left-hand traffic 1ML 247 042-187
24 V variants on request
If you have been using Classic modules so far, you can easily upgrade these to Performance modules.
The following Performance modules have the same module attachment as the Classic module and are therefore compatible and easy to replace – without having to modify the existing Classic carrier frame structure first.
Classic mountings for Performance headlamps
90 mm high beam with PO, 12 V light bulb 1KO 247 043-157
90 mm high beam with 12 V light bulb 1KO 247 043-167
90 mm low beam with 12-V light bulbRight-hand traffic 1BL 247 042-217
Left-hand traffic 1ML 247 042-227
24 V variants on request
These products have the following features:
44
FRONT LIGHTING
90 mm Performance low beam and high beam
Proven illumination. Modules in enhanced quality for use on
long hauls. Pattern-free and hardened closure lid. High-quality
aluminum reflector. With splash water-protected plug
connection. Exact adjustment crews contained in delivery.
Including light source. 24 V versions incl. heavy-duty long-life
bulbs. Low beam with 50 mm DE lens, high beam with free-
form reflector.
HALOGEN HIGH BEAM HEADLAMP
Module headlamp with an aluminum free-form reflector and a non-patterned cover lens, incl. light source.
12 V, with position light, H1, for Performance mounting 1K0 247 043-007
12 V, without position light, H1, for Performance mounting
1K0 247 043-017
12 V, with position light, H1, for Premium mounting 1K0 247 043-117
12 V, without position light, H1, for Premium mounting 1K0 247 043-127
Type approval: ECE 2397
24 V, with position light, H1 Heavy Duty Longlife, for Performance mounting
1K0 247 043-027
24 V, without position light, H1, for Performance mounting
1K0 247 043-037
12 V, with position light, H1, for Classic mounting 1K0 247 043-157
12 V, H1, for Classic mounting 1K0 247 043-167
Type approval: ECE 2397 and ECE 2398
HALOGEN LOW BEAM HEADLAMP
Module headlamp with an aluminum reflector and clear DE lens behind a pattern-free glass cover lens, incl. light source.
12 V, right-hand traffic, H1, for Performance mounting 1BL 247 042-007
12 V, left-hand traffic, H1, for Performance mounting 1ML 247 042-027
12 V, right-hand traffic, H1, for Premium mounting 1BL 247 042-177
12 V, left-hand traffic, H1, for Premium mounting 1ML 247 042-187
24 V, right-hand traffic, H1, for Performance mounting 1BL 247 042-017
24 V, left-hand traffic, H1, for Performance mounting 1ML 247 042-037
Type approval: ECE 2397 and ECE 2398
With a technical solution for so-called "tourist solution" for temporary use in left-hand traffic countries or, for the left-hand traffic versions in right-hand traffic countries.
These products have the following features:
45
HELLA AUXILIARY DRIVING HEADLAMP
For the extra bit of light
HELLA auxiliary headlamps offer that extra something: more light, so you can stay on top of the road in every driving
situation. This therefore increases the safety of every road user. The indisputable HELLA quality and use of state-of-
the-art technology are always included. Tried-and-tested standard solutions, powerful xenon technology or innovative
LED technology: whatever it may be, the HELLA headlamp series is specially tailored to the demands of the
commercial vehicle sector and continuously developed to offer the optimum solution for every application situation.
Light you can rely on.
AUXILIARY DRIVING LAMPS
LED Light Bars
AUXILIARY DRIVING LAMPS LED LIGHT BAR 470
16 high-power LEDs, power requirements: 35 watts, e.g. suitable for 12 and 24 volt systems, IP 6K7 (submersible), ECE type-approved R112 and EMC R10.
Ref. 25, with universal bracket 1FJ 958 130-111
Ref. 37.5, with universal bracket 1FJ 958 130-011
Type approval: ECE 0012 (ref. 25), ECE 0013 (ref. 37.5)
AUXILIARY DRIVING HEADLAMPS LED LIGHT BAR 470 SINGLE TWIN Dual headlamps for central vehicle mounting
2 x 8 high-power LEDs, power requirements: 2 x 18 watts, e.g. suitable for 12 and 24 volt systems, IP 6K7 (submersible) and IP 6K9K, ECE type-approved R112 and EMC R10.
Ref. 17.5 + 17.5, with universal bracket 1FJ 958 130-301
Type approval: ECE 0019 (Ref. 17.5 + 17.5)
This LED product has the following features:
* Only for offroad applications and for use as a work light – not approved for use in road traffic
5744
528
42
67
Offroad headlamp LED LIGHT BAR 470 COMBI* Headlamp with two light beams, wide and long-range
2 x 8 high-power LEDs, power requirements: 2 x 18 watts, e.g. suitable for 12 and 24 volt systems, IP 6K7 (submersible) and IP X9K, ECE type-approved EMC R10.
Offroad headlamp, with universal bracket 1GJ 958 130-461
Type approval: CE type-approved ECE R10 EMC (electromagnetic compatibility)
This LED product has the following features:
5744
528
42
67
Long-range illumination
Close-range illumination (wide)
Combination illumination
ACCESSORIES - PROTECTIVE CAPS FOR LED LIGHT BARS 470
Protective cap, transparent 8XS 958 337-021
Protective cap, amber (transparent) 8XS 958 337-031
Protective cap, black (with white HELLA logo) 8XS 958 337-111
The use of protective caps is not permitted within areas governed by the German Road Licensing Regulations (StVZO).Please observe the valid regulations.
Application example
47
AUXILIARY DRIVING LAMPS
AUXILIARY LAMP LED LIGHT BAR 350
12 high-power LEDs, power requirements: 25 watts, e.g. suitable for 12 and 24 volt systems, IP 6K7 (submersible), ECE type-approved R112 and EMC R10.
Ref. 20, with universal bracket 1FJ 958 040-072
Ref. 30, with universal bracket 1FJ 958 040-082
Type approval: ECE 0008 (ref. 20), ECE 0009 (ref. 30)
This LED product has the following features:
5744
408
42
67
SPARE PARTS / ACCESSORIES FOR LED LIGHT BAR SERIES
Bracket set (2 universal brackets) 8HG 958 139-841
Bracket (1 universal bracket without steel angle bracket, also for custom angles) 8HG 958 139-071
Bracket set (2 steel angle brackets for dual mounting) 8HG 958 128-811
This LED product has the following features:
AUXILIARY DRIVING LAMP HELLA VALUEFIT DLB 540
9 high-power LEDs, power requirements: 66 watts, e.g. suitable for 12 and 24 volt systems, IP 67, ECE type-approved R112 and EMC R10.
Ref. 37.5 including bracket 1FJ 360 002-502
Type approval: ECE, 0027
ROKLUME
This LED product has the following features:
AUXILIARY DRIVING LAMP ROKLUME 380 NFor heavy-duty applications with intense illumination of area in front of vehicle
12 high-power LEDs, power requirements: 85 watts, IP 6K9K, IP 6K8, fording ability: up to 1 m water-depth (max 60 min), ECE type-approved R112 and EMC R10.
Ref. 40 with stainless steel fixing bracket, 24 V 1FA 996 197-181
Ref. 40 with black stainless steel fixing bracket , 12 V (w/o Fig.)
1FA 996 197-151
Type approval: ECE, 4517
min 574 - max 594
539 80
98
M8
48
AUXILIARY DRIVING LAMPS
LUMINATOR
LUMINATOR LED
High beam headlamp, power requirement: 30 watts, e.g. suitable for 12 and 24 volt systems, ECE Ref. 50.
With position light and chrome design ring 1F8 011 002-211
Type approval: ECE 3967
This LED product has the following features:
This LED product has the following features:
SPARE PART
High-beam headlamp insert ref. 50 with position light 1F8 181 541-031
LUMINATOR COMPACT LED
High beam headlamp, power requirement: 11 watts, e.g. suitable for 12 and 24 volt systems, ECE Ref. 45.
with chrome design ring 1F3 011 815-001
With matt black design ring 1F3 011 815-011
Type approval: ECE 3738
SPARE PARTS/ACCESSORIES
Cover lens with chrome design ring 9AG 195 614-001
Cover lens with matt black design ring 9AG 195 614-011
This LED product has the following features:
LUMINATOR X LED
High beam headlamp, power requirement: 40 watts, e.g. suitable for 12 and 24 volt systems, ECE Ref. 37.5.
With chrome design ring 1F0 012 206-001
With matt black design ring 1F0 012 206-011
Type approval: ECE, 0417
SPARE PARTS
Cover lens with seal 9ES 199 813-001
Flat black design ring 9AG 199 812-011
49
AUXILIARY DRIVING LAMPS
LUMINATOR CHROMIUM WITH POSITION LIGHT
H1 high beam headlamp with position light (W5W);Housing, glass holder and bracket made of chromium-plated die-cast zinc
High beam headlamp, ECE Ref. 50 1F8 007 560-411
High beam headlamp, ECE Ref. 37.5 1F8 007 560-311
High beam headlamp, ECE Ref. 17.5 1F8 007 560-341
Type approval: ECE, 3099 (Ref. 50), 1928 (37.5), 2254 (17.5)
This product has the following features:
LUMINATOR CHROMIUM WITH LED POSITION LIGHT
H1 high beam headlamp with LED position light;Housing, glass holder and bracket made of chromium-plated die-cast zinc
High beam headlamp, ECE Ref. 25 1F8 007 560-451
Type approval: ECE, 3047
This LED product has the following features:
LUMINATOR COMPACT CHROMIUM
H1 high beam headlamp
High beam headlamp, ECE Ref. 37.5 1F3 009 094-031
High beam headlamp, ECE Ref. 17.5 1F3 009 094-071
Type approval: ECE, 1901 (Ref. 37.5) und 1902 (Ref. 17.5)
LUMINATOR CHROMIUM CELIS WITH LED POSITION LIGHT
H1 high beam headlamp with Celis LED position light
High beam headlamp, ECE Ref. 17.5 1F3 009 094-031
Type approval: ECE, 1753
This product has the following features:
This product has the following features:
LUMINATOR
50
AUXILIARY DRIVING LAMPS
JUMBO 320
JUMBO 320 FF
H7 spotlight
High beam headlamp (ECE Ref. 37.5) 1FE 008 773-001
High beam headlamp (ECE Ref. 17.5) 1FE 008 773-011
Type approval: ECE, 1655 (Ref. 37.5) and 1740 (Ref. 17.5)
JUMBO 320 FF WITH LED POSITION LIGHT
H7 high beam headlamp with LED position light
High beam headlamp (ECE Ref. 37.5) 1FE 008 773-081
Type approval: ECE, 1655
JUMBO 320 FF WITH POSITION LIGHT
H7 high beam headlamp with position light (W5W)
High beam headlamp (ECE Ref. 37.5) 1FE 008 773-041
Type approval: ECE, 1655
This LED product has the following features:
This product has the following features:
51
AUXILIARY DRIVING LAMPS
RALLYE 3003
RALLYE 3003 WIT CELIS POSITION LIGHT
With chrome design ring, H1 high beam headlamp with round Celis LED position light
High beam headlamp (ECE Ref. 17.5) 1F8 009 797-451
Type approval: ECE, 1753
RALLYE 3003 WITH LED POSITION LIGHT
H1 high beam headlamp with LED position light and chrome design ring
High beam headlamp (ECE Ref. 25) 1F8 009 797-431
Type approval: ECE, 3047
RALLYE 3003 WITH POSITION LIGHT
H1 high beam headlamp with position light (W5W) and chrome design ring
High beam headlamp (ECE Ref. 50) 1F8 009 797-341
High beam headlamp (ECE Ref. 37.5)1F8 009 797-101
(w/o Fig.)
Type approval: ECE, 3099 (Ref. 50) und 1928 (Ref. 37,5)
This LED product has the following features:
This LED product has the following features:
This product has the following features:
52
AUXILIARY DRIVING LAMPS
RALLYE 3003 COMPACT
H1 high beam headlamp with chrome design ring
High beam headlamp (ECE Ref. 37.5) 1F3 010 119-111
High beam headlamp (ECE Ref. 17.5) 1F3 010 119-101
Type approval: ECE, 1901 (Ref. 37,5), 1902 (Ref. 17,5)
This product has the following features:
Product photo Description Part number PU
Bulb H1
12 V, 55 W8GH 002 089-131
24 V, 70 W
8GH 002 089-251
1
1
Bulb H7
12 V, 55 W8GH 007 157-121
24 V, 70 W
8GH 007 157-241
1
1
Spare parts/accessories
53
AUXILIARY DRIVING LAMPS
LE
D L
igh
t B
ar
LE
D L
igh
t B
ar
47
0,
EC
E R
ef.
25
LE
D h
igh
be
am
he
ad
lam
p
12
/ 2
4 V
, 35
W
1FJ
95
8 1
30
-11
1
LE
D L
igh
t B
ar
47
0,
EC
E R
ef.
37
.5
LE
D h
igh
be
am
he
ad
lam
p
12
/ 2
4 V
, 35
W
1FJ
95
8 1
30
-01
1
LE
D L
igh
t B
ar
47
0 S
ing
le T
win
, E
CE
Re
f. 1
7.5
+ 1
7.5
2 x
LE
D h
igh
be
am
he
ad
lam
p
12
/ 2
4 V
, 2 x
18
W
1FJ
95
8 1
30
-30
1
1 x
EC
E R
ef.
17
.51
x E
CE
Re
f. 1
7.5
LE
D L
igh
t B
ar
35
0,
EC
E R
ef.
20
LE
D h
igh
be
am
he
ad
lam
p
12
/ 2
4 V
, 25
W
1FJ
95
8 0
40
-07
2
LE
D L
igh
t B
ar
35
0,
EC
E R
ef.
30
LE
D h
igh
be
am
he
ad
lam
p
12
/ 2
4 V
, 25
W
1FJ
95
8 0
40
-08
2
Lu
min
ato
r
Lu
min
ato
r L
ED
Ge
n.
II,
EC
E R
ef.
50
LE
D h
igh
be
am
he
ad
lam
p
wit
h L
ED
po
siti
on
lig
ht
12
/ 2
4 V
, 30
W
1F
8 0
11
00
2-2
11
Lu
min
ato
r C
om
pa
ct L
ED
, E
CE
Re
f. 4
5
LE
D h
igh
be
am
he
ad
lam
p
12
/ 2
4 V
, 11
W
Ch
rom
e d
esi
gn
rin
g
1F
3 0
11
81
5-0
01
Lu
min
ato
r, E
CE
Re
f. 5
0
LE
D h
igh
be
am
he
ad
lam
p
wit
h p
osi
tio
n l
igh
t
24
V
Ch
rom
ium
1F
8 0
07
56
0-4
11
Lu
min
ato
r, E
CE
Re
f. 2
5
Hig
h b
ea
m h
ea
dla
mp
wit
h L
ED
po
siti
on
lig
ht
12
/ 2
4 V
1F
8 0
07
56
0-4
51
Lu
min
ato
r C
om
pa
ct C
hro
miu
m,
EC
E R
ef.
37
,5
Hig
h-b
ea
m h
ea
dla
mp
24
V
1F
3 0
09
09
4-0
31
Ju
mb
o
Ju
mb
o 3
20
FF,
EC
E R
ef.
37
.5
Hig
h b
eam
hea
dlam
p, 1
2 /
24 V
wit
h L
ED
po
siti
on
lig
ht
1F
E 0
08
77
3-0
81
wit
h p
osi
tio
n l
igh
t W
5W
1F
E 0
08
77
3-0
41
Wit
ho
ut
po
siti
on
lig
ht
1F
E 0
08
77
3-0
01
54
AUXILIARY DRIVING LAMPSV
AL
UE
FIT
Ro
kL
UM
E
HE
LL
A V
AL
UE
FIT
DL
B,
EC
E R
ef.
37
.5
LE
D h
igh
be
am
he
ad
lam
p
12
/ 2
4V
, 66
W
1FJ
36
0 0
02
-50
2
Ro
kL
UM
E 3
80
N,
EC
E R
ef.
40
LE
D h
igh
be
am
he
ad
lam
p
24
V, 8
5 W
1F
A 9
96
19
7-1
81
Ra
llye
Ra
llye
30
03
Ce
lis,
EC
E / S
AE
Re
f. 1
7.5
Hig
h b
ea
m h
ea
dla
mp
wit
h L
ED
po
siti
on
lig
ht
12
/ 2
4 V
1F
8 0
09
79
7-4
51
Ra
llye
30
03
, E
CE
/ S
AE
Re
f. 2
5
Hig
h b
ea
m h
ea
dla
mp
wit
h L
ED
po
siti
on
lig
ht
12
/ 2
4 V
Silv
er-
colo
ure
d r
ing
1F
8 0
09
79
7-4
21
Ch
rom
e r
ing
1F
8 0
09
79
7-4
31
Ra
llye
30
03
, E
CE
Re
f. 5
0
LE
D h
igh
be
am
he
ad
lam
p
wit
h p
osi
tio
n l
igh
t
24
V
1F
8 0
09
79
7-3
41
Ra
llye
30
03
, E
CE
Re
f. 3
7,5
Hig
h b
ea
m h
ea
dla
mp
wit
h p
osi
tio
n l
igh
t
24
V
1F
8 0
09
79
7-1
01
Ra
llye
30
03
Co
mp
act
, E
CE
Re
f. 3
7.5
Hig
h-b
ea
m h
ea
dla
mp
24
V
1F
3 0
10
11
9-1
11
Ra
llye
30
03
Co
mp
act
, E
CE
Re
f. 1
7.5
Hig
h-b
ea
m h
ea
dla
mp
24
V
1F
3 0
10
11
9-1
01
He
ad
lam
p f
or
Hig
h B
eam
(in
teg
rate
d in
to t
he
he
ad
lam
p a
nd
au
xil
iary
dri
vin
g l
am
p)
Mo
un
tin
gR
eq
uir
ed
fo
r a
ll p
ass
en
ge
r ca
r cl
ass
es
Nu
mb
er
2 o
r 4
un
its,
fo
r N
3 v
eh
icle
s*, m
ax.
6 u
nit
sO
nly
use
hig
h b
ea
ms
wh
en
no
gla
rin
g o
f o
nco
min
g t
raff
ic
Mo
un
tin
g H
eig
ht
No
sp
eci
fic
reg
ula
tio
ns,
i.e
. ca
n b
e f
ree
ly s
ele
cte
d u
p t
o a
he
igh
t o
f 4
m.
Mo
un
tin
g w
idth
No
sp
eci
al r
eg
ula
tio
ns
bu
t m
ust
be
inst
alle
d in
su
ch a
wa
y th
at
the
dri
ver
is
no
t d
istu
rbe
d b
y re
fle
ctio
ns.
Ele
ctri
cal c
ircu
it
Th
e h
igh
be
am
he
ad
lam
ps
ma
y o
nly
be
sw
itch
ed
on
eit
he
r a
t th
e
sam
e t
ime
or
in p
air
s.
If t
wo
ad
dit
ion
al h
igh
be
am
he
ad
lam
ps
ha
ve b
ee
n m
ou
nte
d, t
he
n n
o m
ore
th
an
tw
o p
air
s m
ay
be
sw
itch
ed
on
at
the
sa
me
tim
e. D
uri
ng
th
e t
ran
siti
on
fr
om
low
be
am
to
hig
h b
ea
m, a
t le
ast
1 p
air
ne
ed
s to
be
sw
itch
ed
on
fo
r h
igh
b
ea
m. W
he
n t
he
low
be
am
is s
wit
che
d o
n, a
ll h
igh
be
am
he
ad
lam
ps
ha
ve t
o
be
ext
ing
uis
he
d s
imu
lta
ne
ou
sly.
Oth
er
Re
gu
lati
on
sT
he
su
m o
f th
e r
efe
ren
ce n
um
be
rs o
f a
ll th
e h
igh
be
am
he
ad
lam
ps
tha
t a
re
op
era
tio
na
l on
th
e v
eh
icle
ma
y n
ot
be
gre
ate
r th
an
10
0 .
* N
3 v
eh
icle
s: f
or
the
tra
nsp
ort
ati
on
of
go
od
s w
ith
a p
erm
issi
ble
to
tal w
eig
ht
of
> 1
2 t
4 m
Exa
mp
le –
N3ve
hic
le c
ate
go
ry >
12
t
Pe
rmit
ted
Mo
un
tin
g P
osi
tio
ns
Le
ge
nd
eF
S =
Hig
h-b
ea
m h
ea
dla
mp
| F
S L
ED
= H
igh
-be
am
he
ad
lam
p L
ED
| L
ED
-PO
= L
ED
po
siti
on
lig
ht
55
HELLA WIRING SYSTEMS –
ALWAYS WELL CONNECTED.
The EasyConn connector system is made up of
2, 7, and 15-pin connector housings and female
connector housings. For even easier mounting
on trailers, their diameter has been drastically
reduced. SUPERSEAL and 7-pin DIN bayonet plug
connectors can be used to expand the system.
This allows you to combine lighting systems
flexibly and retrofit or convert them, especially in
trailers.
The 15-pin front, central and rear main cables
in the wiring are still treated as a constituent
part of the tried-and-tested EasyConn system.
The wiring system makes it quick and easy to
connect new products to various systems that
are already present.
COLOURS WITH A SYSTEMStraightforward connection of all components with process reliability, thanks to the HELLA colour system.
7-pin EasyConn connector
Rear lamps are connected to the
EasyConn system using the 7-pin
connector housing and female
connector housing.
15-pin EasyConn connector
The 15-pin EasyConn connector
housing and female connector
housing connect the front adapter,
the main supply cable, and the
rear adapter to one another.
15-pin EasyConn connector II
The proven 15-pin plug connectors
are also available as a connector
set, through which customer-
specific requests as well as
repairs can be easily implemented.
7-pin DIN bayonet connector
Our round light system as well
as third-party products can be
connected via a 7-pin DIN bayonet
connector.
LED HYBRID REAR LAMPLED HYBRID ROUND LIGHT SYSTEMS
2-pin SUPERSEAL connector
With the 2-pin SUPERSEAL
connection, customers can fall
back on yet another reliable
product for the connecting of
single-function lights.
2-pin EasyConn connector
The 2-pin EasyConn connector
and female connector housing
enables, for example, SMLR,
position and clearance lights as
well as 2-pin additional functions.
Quick link
Our quick link press connection:
flexible and secure mounting
of single-function lights on our
HELLA flat conductor.
HELLA REAR COMBINATION LAMPS
A crowning completion for the rear of the vehicle
Also in the area of vehicle rear lighting, the introduction of LED lighting has resulted in a quantum leap in developing
new innovative lighting concepts – and HELLA has been a leader in this development from the very beginning.
The combination options of LED and innovative optics systems open up attractive styling options for a unique
brand-specific appearance playing an increasing role also for vehicles in the commercial and agricultural fields.
An impressive example "Made by HELLA" are the extraordinary KRONE hybrid or full LED rear combination lamp with
integrated logo.
REAR LAMPS
MAN FULL LED TRUCK REAR COMBINATION LAMP
Full LED rear combination lamp for horizontal mounting. With standard direction indicator. With glowing-body strip optics. Replaceable, non-patterned lens. Curved outer lens for optimal leak-tightness. Housing PC and ABS black, 2 fixing screws M8 (distance: 152 mm) wit impulse for direction indicator failure monitors. Protection class: IP 5K4K, IP X9K.
Tail light/reflex reflectors/stop light/indicator/rear fog light/reverse/side marker reflector light.
With 7-pin DIN connector.
Left, with licence plate light 2VD 012 381-0111)
Right, without licence plate light 2VP 012 381-0211)
Left, without licence plate light 2VP 012 381-0511)
Right, without licence plate light, with backup alarm 2VP 012 381-0611)
With 500 mm cable and 7-pin DIN connector
Left, with licence plate light 2VD 012 381-0311)
Right, without licence plate light 2VP 012 381-0411)
Right, without licence plate light, with backup alarm 2VP 012 381-0811)
Spare parts / Accessories:
Lens 9EL 208 551-011
LED direction indicator control unit 24 volts 5DS 227 488-101
Led flasher unit 24 volts 4DW 009 492-011
1)
300
13
0
This LED product has the following features:
Functions LEDs PowerCurrent
consumption
Tail light 12 red 24 V / 2.8 W 0.12 A
Stop light 18 red 24 V / 2.2 W 0.09 A
Direction indicator 6 amber 24 V / 4.2 W 0.18 A
Rear fog light 8 red 24 V / 2.5 W 0.10 A
Back-up light 4 white 24 V / 4.7 W 0.20 A
Side marker light 5 red 24 V / 2.8 W 0.12 A
Licence plate light 4 white 24 V / 1.7 W 0.07 A
Pin assignment
1 Ground (white)
2 Tail light (black)
3 Reversing light (pink)
4 Direction indicator (yellow/green)
5 Stop light (red)
6 Rear fog light (blue)
7 Vacant or backup alarm (...)
Application example
4
3
21
7
6
5
59
REAR LAMPS
DAF FULL LED TRUCK REAR COMBINATION LAMP
Full LED rear combination lamp for horizontal mounting. With dynamic direction indicator. With glowing-body C optics Replaceable, non-patterned lens. Curved outer lens for optimal leak-tightness. Housing P and ABS black, 2 fixing screws M8, with pulse for direction indicator failure monitor. Protection class IP 5K4K, IP X9K. Tail light/reflex reflector/stop light/indication/rear fog light/reverse light/ side marker reflector light.
With 8-pin HCSCS connector; fixing screw interval: 160 mm
With lateral connector
Left, with licence plate light 2VD 012 381-2112)
Right, without licence plate light 2VP 012 381-2212)
Right, without licence plate light, with backup alarm 2VP 012 381-2412)
With rear connector
Left, with licence plate light 2VD 012 381-2512)
Right, without licence plate light 2VP 012 381-2612)
Right, without licence plate light, with backup alarm 2VP 012 381-2812)
With 7-pin DIN connector; fixing screw interval: 152 mm
With lateral connector
Left, with licence plate light 2VD 012 381-3111)
Right, without licence plate light 2VP 012 381-3211)
Right, without licence plate light, with backup alarm 2VP 012 381-3411)
With rear connector
Left, with licence plate light 2VD 012 381-3511)
Right, without licence plate light 2VP 012 381-3611)
Right, without licence plate light, with backup alarm 2VP 012 381-3811)
Spare parts / Accessories:
Lens 9EL 208 551-001
LED direction indicator control unit 24 volts 5DS 227 488-101
LED flasher unit 24 volts 4DW 009 492-011
1)
300
13
0
This LED product has the following features:
Functions LEDs PowerCurrent
consumption
Tail light 12 red 24 V / 2.8 W 0.12 A
Stop light 18 red 24 V / 2.2 W 0.09 A
Direction indicator 6 amber 24 V / 4.2 W 0.18 A
Rear fog light 8 red 24 V / 2.5 W 0.10 A
Back-up light 4 white 24 V / 4.7 W 0.20 A
Side marker light 5 red 24 V / 2.8 W 0.12 A
Licence plate light 4 white 24 V / 1.7 W 0.07 A
Application example
Pin assignment
1 Ground (white)
2 Vacant or backup alarm (black)
3 Vacant (…)
4 Rear fog light (blue)
5 Tail light (black)
6 Reversing light (pink)
7 Direction indicator (yellow/green)
8 Stop light (red)
2)
4
3
2
1
7
8
6
5
60
REAR LAMPS
HYBRID AND FULL LED REAR COMBINATION LAMP WITH KRONE LOGO
Hybrid or a full LED rear combination lamp, tail light/stop light/direction indicator/rear fog lamp/reversing light with reflex reflector, with or without rubber arm. Series 340 960 / 340 961 with white frame.With pulse for direction indicator failure monitor (full LED versions).
Hybrid with EasyConn connector (7-pin)
With rubber arm (LED clearance light)
Left (amber) 2VP 340 961-5311)
Right (blue) 2VP 340 961-5411)
Without rubber arm (LED clearance light)
Left (amber) 2VP 340 961-5111)
Right (blue) 2VP 340 961-5211)
Full LED with EasyConn connector (7-pin)
With rubber arm (LED clearance light)
Left (amber) 2VP 340 960-2311)
Right (blue) 2VP 340 960-2411)
Without rubber arm (LED clearance light)
Left (amber) 2VP 340 960-2511)
Right (blue) 2VP 340 960-2611)
Type approval: ECE-R65, ECE-R10; GGVS / ADR: only full-LED 2VP 340 960- …
1)
This LED product has the following features:
Functions LEDs PowerCurrent
consumption
Tail light 7 red 24 V / 0.02 W 0.01 A
Stop light 7 red 24 V / 20 W 0.83 A
Direction indicator 7 amber 24 V / 3 W 0.13 A
Rear fog light 7 red 24 V / 2.5 W 0.10 A
Back-up light 6 white 24 V / 2.5 W 0.10 A
Clearance light 1 red / 1 white 24 V / 1.2 W 0.05 A
Side marker light 2 amber 24 V / 1 W 0.04 A
Also available: KRONE licence plate lamp
You can find more information on these products in
chapter licence plate lamps on page 78.
72
(32)#20
(93)
LED LICENCE PLATE LIGHT
With 2,000 mm cable and 6.3 mm flat connector 2KA 012 271-231
With 1,300 mm cable and 2-pin EasyConn angle plug 2KA 012 271-271
LENS
Left 9EL 183 432-031
Right 9EL 183 432-041
61
REAR LAMPS
This LED product has the following features:
LED hybrid rear lamp
Modular standard hybrid trailer rear combination lamp, 24 V, for horizontal mounting, tail/stop light always in LED, all other functions possible with bulb or by retrofitting to LED. Tail light/stop light/indicator/fog light/reversing light with triangular reflex reflector, with or without rubber arm. With black frame
Functions: LED tail light/stop light bulb: stop light, indicator, rear fog light and reversing light
Without rubber arm (LED clearance light)
Hybrid, left (amber) 2VP 340 961-0111)
Hybrid, right (blue) 2VP 340 961-0211)
With rubber arm
Left (amber) 2VP 340 961-4112)
Right (blue) 2VP 340 961-4212)
Functions: LED: tail light/stop light and rear fog light bulb: indicator and reversing light
Without rubber arm (LED clearance light)
Hybrid, left (amber) 2VP 340 961-0311)
Hybrid, right (blue) 2VP 340 961-0411)
With rubber arm
Left (amber) 2VP 340 961-4312)
Right (blue) 2VP 340 961-4412)
Functions: LED tail light/stop light and side marker light bulb: direction indicator light, rear fog light, reversing light and clearance light
With rubber arm (LED clearance light)
Hybrid, left (amber) 2VP 340 961-1111)
Hybrid, right (blue) 2VP 340 961-1211)
Functions: LED tail light/stop light and clearance light bulb: direction indicator light and rear fog light with rubber arm
Hybrid, left (amber) 2VP 340 961-1311)
Hybrid, right (blue) 2VP 340 961-1411)
Functions: LED tail light/stop light/rear fog and clearance light bulb: indicator light with rubber arm
Hybrid, left (amber) 2VP 340 961-1511)
Hybrid, right (blue) 2VP 340 961-1611)
Functions: LED: tail light/stop light, indicator and side marker light bulb: indicator, rear fog and reversing light, without rubber arm
Hybrid, left (amber) 2VP 340 961-2111)
Hybrid, right (blue) 2VP 340 961-2211)
Functions: LED: tail light/stop light and clearance light bulb: stop light, indicator and rear fog light with flash SMLR, without rubber arm
With integrated electronic for control of flashing LED side marker lights with rubber arm
Hybrid, left (amber) 2VP 340 965-1111)
Hybrid, right (blue) 2VP 340 965-1211)
Left (amber) 2VP 340 965-4312)
Right (blue) 2VP 340 965-4412)
Without rubber arm
Left (amber) 2VP 340 965-4512)
Right (blue) 2VP 340 965-4612)
1) 2)
Functions LEDs Power Current consumption
Tail light 7 red 24 V / 0.02 W 0,01 A
Stop light 7 red 24 V / 20 W 0,83 A
Direction indicator 7 amber 24 V / 3 W 0,13 A
Back-up light 6 white 24 V / 2.5 W 0,10 A
Rear fog light 7 red 24 V / 2.5 W 0,10 A
With rubber arm
Clearance light1 red,
1 white24 V / 1.2 W 0,05 A
Side marker reflex reflector light
2 amber 24 V / 1 W 0,04 A
62
REAR LAMPS
1)
Full LED combination rear light
Modular standard full LED trailer rear combination lamp, 24 V, for horizontal mounting, clear lens, with pulse for direction indicator failure monitor. Protection classes: lamp IP 5K4K, LED module IP 6K9K. Tail light/stop light/indicator/rear fog light and reversing light with triangular reflector, with or without rubber arm. With black frame
Functions LEDs Power Current consumption
Tail light 7 red 24 V / 0.2 W 0.01 A
Stop light 7 red 24 V / 20 W 0.83 A
Direction indicator 7 amber 24 V / 3 W 0.13 A
Back-up light 6 white 24 V / 2.5 W 0.10 A
Rear fog light 7 red 24 V / 2.5 W 0.10 A
With rubber arm
Clearance light 1 red 24 V / 1.2 W 0.05 A
Side marker light 2 amber 24 V / 1 W 0.04 A
Without rubber arm
Left (amber) 2VP 340 960-0111)
Right (blue) 2VP 340 960-0211)
Left 2VP 340 960-2712)
Right 2VP 340 960-2812)
With rubber arm
Left (amber) 2VP 340 960-1111)
Right (blue) 2VP 340 960-1211)
Flash encoder for SMLR and rubber armVersions with integrated electronics for control of flashing LED side marker lights. With rubber arm
Left (amber) 2VP 340 964-1111)
Right (blue) 2VP 340 964-1211)
Without rubber arm
Left (amber) 2VP 340 964-0111)
Right (blue) 2VP 340 964-0211)
2)
This LED product has the following features:
With rubber arm
Without rubber arm
63
"COLUNA" FULL LED REAR COMBINATION LAMP
Full LED five-chamber light. With triangular reflector for horizontal mounting to 24 V trailers. 12 red LEDs for tail light function arranged as a light curtain. With fastening bolts from the rear. With pulse for direction indicator failure monitor.
1,000 mm cable with EasyConn connector (7-pin)
Left (amber) 2VP 345 900-0111)
Right (blue) 2VP 345 900-0211)
1,000 mm cable with DIN bayonet connector AMP (7-pin)
Left 2VP 345 900-0912)
Right 2VP 345 900-1012)
3,000 mm cable with 6.3 mm flat receptacles
Left 2VP 345 900-1313)
Right 2VP 345 900-1413)
Type approval: 5879 and 5880, 10R 04 0071, EMC
1)3)
2)
300
40
13
0
This LED product has the following features:
Functions LEDs Power Current consumption
Tail light 12 red 24 V / 2.8 W 0.12 A
Stop light 6 red 24 V / 2 W 0.08 A
Direction indicator 6 amber 24 V / 3.8 W 0.16 A
Rear fog light 6 red 24 V / 2.4 W 0.10 A
Back-up light 6 white 24 V / 5.6 W 0.23 A
REAR LAMPS64
This LED product has the following features:
This LED product has the following features:
300
130
40
300
130
40
"COLUNA“ FULL-LED REAR COMBINATION LAMP
Full LED tail light, stop light, indicator, rear fog lamp, reversing light with reflex reflector. With 36 LEDs. With rectangular reflector for horizontal and vertical surface mounting. With 3,000 mm cable and 6.3 mm flat receptacles. Can be used on the left and right.
With pulse for direction indicator failure monitor
12 V/13.7 W, current consumption = approx. 1.14 A24V/16.6 W, current consumption = approx. 0.69 A
Mounted by inserting fixing screws from the front
12 V 2VP 345 900-441
24 V 2VP 345 900-241
Fixing bolts inserted from the rear
12 V 2VP 345 900-461
24 V 2VP 345 900-261
Type approval: 5879 and 5880, 10R 04 0071, EMC
"COLUNA" FULL LED REAR COMBINATION LAMP
Full LED tail light, stop light, indicator, rear fog lamp, reversing light with reflex reflector. With 36 LEDs. With rectangular reflector for horizontal and vertical surface mounting. With 3,000 mm cable and 6.3 mm flat receptacles. Can be used on the left and right.
Without pulse for direction indicator failure monitor
12 V/13.7 W, current consumption = approx. 1.14 A24V/16.6W, current consumption = approx. 0.69 A
Mounted by inserting fixing screws from the front
12 V 2VP 345 900-451
24 V 2VP 345 900-251
Fixing bolts inserted from the rear
12 V 2VP 345 900-471
24 V 2VP 345 900-271
Type approval: 5879 and 5880, 10R 04 0071, EMC
REAR LAMPS 65
REAR LAMPS
Ø 140,2 17 82
HYBRID AND FULL LED REAR COMBINATION LAMP
Can be mounted on left or right. Lens can be replaced in the event of damage. Tail light, brake and direction indicators are suitable for double mounting.
Functions LEDs Power Current consumption
Tail light 6 24 V / 0.25 W 0.01 A
Stop light 6 24 V / 2.45 W 0.10 A
Direction indicator 3 24 V / 1.9 W 0.08 A
Rear fog light 6 24 V / 2.45 W 0.10 A
Back-up light 3 24 V / 1.9 W 0.08 A
With bulb
Direction indicator – 24 V / 21 W 0.88 A
Accessories
Replacement lens 9EL 213 522-001
Cap 9XX 340 814-017
1) 2) 3)
This LED product has the following features:
Hybrid: a) Tail light, stop light (LED) and direction indicator (bulb)
300 mm cable, Y-adapter on 7-pole DIN bayonet connector and 7-pole DIN bayonet plug housing
With integrated resistor for stop light function
2SD 013 155-0011)
Without resistance 2SD 013 155-0111)
3,000 mm cable with 6.3 mm blade receptacle connector
With integrated resistor for stop light function
2SD 013 155-0213)
Without resistance 2SD 013 155-0313)
Full LED: b) Tail light, stop light and direction indicator (LED), with GGVS / ADR approval
300 mm cable, Y-adapter on 7-pole DIN bayonet connector and 7-pole DIN bayonet plug housing, without resistance
2SD 013 155-1011)
3,000 mm cable with 6.3 mm blade receptacle connector, without resistor
2SD 013 155-1113)
c) Rear fog light, reversing light (LED) with GGVS / ADR approval
300 mm cable, Y-adapter on 7-pole DIN bayonet connector and separate outflow 2-pole AMP SUPERSEAL (for connection of addition lighting functions)
2NR 013 155-2011), 2)
300 mm cable with 7-pole DIN bayonet connector
2NR 013 155-2111)
3,000 mm cable with 6.3 mm blade receptacle connector
2NR 013 155-2213)
Type approval: ECE-R10
Tail light
Stop light
Direction indicator
Rear fog light
Back-up light
66
REAR LAMPS
Universal rear combination lights
LED TAIL LIGHT/STOP LIGHT "STRIP LAMP"
Mounting variant, horizontal and vertical, low power consumption, 24 V, lens made from highly impact-resistant Grilamid®, with 300 mm cable.
24 V 2SB 980 887-211
Type approval: ECE 10R 04-2913 and 5891
This LED product has the following features:
"STRIP LAMP" LED DIRECTION INDICATOR
Ultra-flat design, mounting variant, without pulse for direction indicator failure monitor, low power consumption, 12 and 24 V, lens made from highly impact-resistant Grilamid®.
12 V, horizontal 2BA 980 888-311
12 V, vertical 2BA 980 888-511
24 V, horizontal 2BA 980 888-411
24 V, vertical 2BA 980 888-611
Type approval: ECE 5869 and ECE 5890
This LED product has the following features:
67
REAR LAMPS
LED DIRECTION INDICATOR "STRIP LAMP"
Without pulse for direction indicator failure monitor, mounting variant, horizontal and vertical, low power consumption, 12 and 24 V, lens made from highly impact-resistant Grilamid®, with 2,500 mm cable.
24 V 2BA 980 888-211
Type approval: ECE 10R 04-2910 (only 24 V) and 5891
This LED product has the following features:
LED ADDITIONAL STOP LIGHT "STRIP LAMP"
Mounting variant, horizontal and vertical, low power consumption, 12 and 24 V, lens made from highly impact-resistant Grilamid®, with 2,500 mm cable.
12 V 2DA 980 887-311
24 V 2DA 980 887-411
Type approval: ECE 10R 04-2910 (only 24 V) and 0087
This LED product has the following features:
68
REAR LAMPS
LED REVERSING LIGHT "STRIP LAMP"
Mounting variant, horizontal or vertical, low power consumption, 12 and 24 V, lens made from highly impact-resistant Grilamid®, with 2,500 mm cable.
12 V, horizontal 2ZR 980 889-011
12 V, vertical 2ZR 980 889-111
24 V, horizontal 2ZR 980 889-211
24 V, vertical 2ZR 980 889-311
Type approval: ECE 0027 (horizontal) and 0028 (vertical)
This LED product has the following features:
LED REAR FOG LIGHT "STRIP LAMP"
Mounting variant, horizontal and vertical, low power consumption, 12 and 24 V, lens made from highly impact-resistant Grilamid®, with 2,500 mm cable.
12 V 2NE 980 889-501
24 V 2NE 980 889-601
Type approval: ECE 10R 04-2910 (only 24 V) and 0010
This LED product has the following features:
69
REAR LAMPS
Auxiliary stop lights
This LED product has the following features:
LED ADDITIONAL STOP LAMPS
For horizontal or vertical mounting. Installation height 9.5 mm (installed condition). Screw fixing With 3,000 mm cable Approved for ECE.
Functions LEDs Power Current
consumption
Red lens
Auxiliary brake light
10 red 12 V / 0.7 W 0.06 A
Open cable ends 2DA 343 106-001
Auxiliary brake light
10 red 24 V / 1.4 W 0.06 A
Open cable ends 2DA 343 106-011
Smoked glass lens
Auxiliary brake light
10 red 12 V / 0.7 W 0.06 A
Open cable ends 2DA 343 106-021
Auxiliary brake light
10 red 24 V / 1.4 W 0.06 A
Open cable ends 2DA 343 106-031
Type approval: ECE 7696
This LED product has the following features:
LED ADDITIONAL STOP LAMPS
With red cover lens. Adhesive mount for horizontal mounting. With 200 mm cable and 6.3 mm flat receptacles Approved for ECE. IP 67.
Functions LEDs Power Current consumption
Auxiliary brake light
8 red 12 V / 1.7 W 0.12 A
Open cable ends 2DA 012 596-001
Auxiliary brake light
8 red 24 V / 1.7 W 0.24 A
Open cable ends 2DA 012 596-011
Type approval: ECE 4128, SAE, CCC
70
REAR LAMPS
This LED product has the following features:
LED ADDITIONAL STOP LAMPS
For horizontal mounting, with 12 red LEDs, in clear optics, with 3D depth effect. Each of the 12 LEDs is embedded in separate reflector. With 200 mm cable Approved for ECE.
Functions LEDs Power Current
consumption
Auxiliary brake light
12 red 12 V /1.8 W 0.15 A
Open cable ends 2DA 343 800-001
Type approval: ECE 7715
This product has the following features:
AUXILIARY STOP LIGHTS
For installation in car body or rear spoiler. Red cover lens and black housing. With 12 V bulb. Without cable Approved for ECE.
Functions Power Current consumption
Auxiliary brake light 12 V /1.8 W 0.15 A
Open cable ends 2DA 007 421-001
Type approval: ECE 02198, SAE
This LED product has the following features:
REPULSE PRO REVERSING LIGHT
870 lumens, power requirement: 11 watts, colour temperature: 5,500 kelvins,heat-conducting plastic housing, total corrosion protection thanks to Thermo Pro technology, upright/pendant mounting. With 3 LEDs.
AMP-SUPERSEAL connector (2-pole) with 2,000 mm cable 2ZR 012 456-001
EasyConn connector (2-pole) with 1,000 mm cable 2ZR 012 456-011
6.3 mm flat receptacles with 3,000 mm cable 2ZR 012 456-021
Type approval: ECE-R23, ECE-R10, 0017
71
HELLA SIDE MARKER LIGHTS
Side marker lights are an important safety feature enabling better visibility of the vehicle contours for other road users,
especially during darkness. Especially vehicles with large dimensions, such as harvesters, long transporters, etc. can
be better represented in this way. In some countries, active side marker lights are legally required for vehicles of a
certain length.
HELLA side marker lights meet the highest standards also for demanding applications while convincing thanks to the
durability and known HELLA quality.
SIDE MARKER LIGHTS
REFLEX REFLECTOR
For horizontal or vertical mounting. Effective reflector surface 22 cm2.Approved for ECE.
Per 20 units:
Red, self-adhesive 8RA 003 326-031
Red, screw fixing (w/o Fig.) 8RA 003 326-001
Amber, self-adhesive 8RA 003 326-041
Yellow, screw fixing (w/o Fig.) 8RA 003 326-011
White, self-adhesive 8RA 003 326-051
White, screw fixing (w/o Fig.) 8RA 003 326-021
Type approval: -001, -011, -021 ECE 0221395, -031, -041, -051 ECE 92031
Adhesive fixing Adhesive fixing: Ø 4.3 mm
REFLEX REFLECTOR
From PMAA material, with white base plate. Effective reflector surface 22 cm2.Approved for ECE.
Per 25 units:
Red, self-adhesive 8RA 002 014-281
Red, screw fixing (w/o Fig.) 8RA 002 014-231
Amber, self-adhesive 8RA 002 014-301
Yellow, screw fixing (w/o Fig.) 8RA 002 014-251
White, self-adhesive 8RA 002 014-291
White, screw fixing (w/o Fig.) 8RA 002 014-241
Type approval: -231, -241, -251 ECE 020030, -281, -291, -301 ECE 020031
Adhesive fixing Screw fixing
TRIANGULAR REFLEX REFLECTOR
Effective reflector surface 85 cm2. Approved for ECE.
Red, with plastic base plate and 2 holes Ø 6 mm, for fixing screws
8RA 002 020-001
Red, with plastic base plate and additional metal base plate, 2 fixing screws M5 x 20
8RA 002 020-051
Type approval: ECE 02346
73
SIDE MARKER LIGHTS
SIDE MARKER LIGHT
For horizontal or vertical recessed mounting, with reflex reflector, 12 V or 24 V bulb, white or yellow base plate. Approved for ECE.
White base plate, 12 V / 3 W 2PS 962 964-031
Yellow base plate, 24 V / 3 W 2PS 962 964-012
Type approval: 023153, 0004, SAE A P2 95, CCC 1090007
A
B
90 mm
51,2 mm
111,3 mm
B
A
20,9 mm
0,5 mm
LED SIDE MARKER LIGHT WITH REFLEX REFLECTOR
With light guide, passive electronics, and ADR/GGVS tested, mounting via 5.8 mm screw holes, operating temperature -40°C to + 60°C, protection class IP 5K9K. Tested to HELLA standard 67101 class 5.1. Approved for ECE.
Functions LEDs Power Current
consumption
Side marker light and reflex reflector
2 amber 1.2 W / 24 V ca. 0.05 A
With 500 mm cable, open cable ends 2PS 345 600-011
Type approval: 5881
This LED product has the following features:
This LED product has the following features:
74
SIDE MARKER LIGHTS
This LED product has the following features:
LED SIDE MARKER LIGHT WITH REFLEX REFLECTOR
For horizontal or vertical mounting, amber lens, amber light, black housing. With horizontal mounting, the optical field must point to the outer edge of the vehicle. With cellular rubber seal for sealing the light and 2 holes for fastening screws B4.2, or by using a bracket (to be ordered separately).Protection class IP 6K9K. Also suitable for flashing function. ADR/GGVS-tested.
Functions LEDs Power Current
consumption
Side marker light 1 amber 24 V / 1.2 W ca. 0.05 A
Mounting
Horizontal mounting, with 1,500 mm cable 2PS 008 645-0011)
Vertical mounting, with 1,500 mm cable 2PS 008 645-9911)
For horizontal mounting, with EasyConn connector housing (2-pin)
With 1,300 mm cable 2PS 008 645-3112)
For horizontal mounting, with quick-link wiring
With 1,300 mm cable 2PS 008 645-6213)
For horizontal mounting, with AMP SUPERSEAL plug connection
With 500 mm cable 2PS 008 645-8914)
Accessories
Bracket 8HG 160 409-002
Type approval: 021395, 001396, 021397, 001397, SAE AP2 01, CCC A047950
1) 3)2) 4)
75
HELLA MARKER LIGHTS
With HELLA marker, clearance, position and indicator lights, you can make sure your vehicle is also clearly visible to
all road users in the dark and when visibility is poor. A clear advantage for the safety of each individual situation,
whether on the road or during field work. Throughout, we always use greatest quality and innovative and efficient
technologies for the lights, such as LED technology.
With their up to 80% less power consumption than conventional bulb technology, our lights are thus paving the way
towards more design and safety with maximum service life. For especially in trucks and agricultural machinery with
high-mileages, frequent bulb replacement not only takes a lot of effort but is also costly. Retrofitting to the innovative
HELLA LED lamps is therefore an efficient choice in every way!
HELLA marker lights are furthermore characterised by outstanding quality when it comes to workmanship and
stability – and their long service life proves it.
Don't leave safety up to chance – trust HELLA marker lights.
MARKER LIGHTS
This LED product has the following features:
LED LICENCE PLATE LIGHTS FOR LICENCE PLATE 520 X 120 MM
For installation above the licence plate (520 x 120 mm), 2 lights required to illuminate the licence plate, protection class: IP 6K9K.
Functions LEDs Power Current
consumption
Licence plate light 4 white 24 V / 1 W ca. 0.04 A
With frame, without cable, and blade terminal 6.3 x 0.8 mm 2KA 010 278-0111)
Functions LEDs PowerCurrent
consumption
Licence plate light 4 white 12 V / 1 W ca. 0.08 A
With frame, without cable, and blade terminal 6.3 x 0.8 mm 2KA 010 278-3111)
Type approval: 2609
1)
This LED product has the following features:
LED LICENCE PLATE LIGHT
For mounting on the right or left of the licence plate, with 4 LEDs, clear lens, housing made of black synthetic material, with CE and ECE type approval, with blade terminal 6.3 x 0.8.
For 520 x 120 mm licence plates, only 1 light required for illumination
12 V/1 W, current consumption = approx. 0.08 A 2KA 010 278-3211)
24 V / 1 W, current consumption = 0.04 A 2KA 010 278-0211)
Type approval: 2609
For 340 x 240 and 280 x 200 mm licence plates
12 V/1 W, current consumption = approx. 0.08 A 2KA 010 278-4211)
24 V / 1 W, current consumption = 0.04 A 2KA 010 278-1211)
Type approval: 2911
1)
77
LICENCE PLATE LIGHT
For licence plate 340 x 240 mm: Mounting above and below licence plate. (1 lamp)
For licence plate 520 x 120 mm:Mounting on side or above licence plate (2 lamps)
For licence plate 240 x 165 mm:Mounting on side of licence plate (1 or 2 lamps) Licence plate light 10 W for 6-V-, 12-V- or 24-V applications; delivery scope without bulbs
Housing colour: grey
For screw mounting, 6.3 mm blade terminal and grommet 2KA 003 389-001
Housing colour: black
For screw mounting, 6.3 mm blade terminal and grommet 2KA 003 389-061
Type approval: 22819, SAE, CCC (only -061)
Spare parts/accessories
R10 W bulb
12 V 8GA 002 071-131
24 V 8GA 002 071-251
24 V (HD) 8GA 002 071-271
MARKER LIGHTS
This LED product has the following features:
#20
(93)
72
(32)
LED LICENCE PLATE LIGHT
EMC approved class 3, operating temperature -40°C to +85°C, protection class IP 5K9K. Tested to HELLA norm 67001 class 5.1. Multivolt.
Functions LEDs Power Current
consumption
Licence plate light 2 white12 V / 0.3 W 24 V / 0.6 W
0.03 A
Housing colour: black
With 2,000 mm cable and 6.3 mm flat receptacles 2KA 012 271-0311)
With 1,300 mm cable and EasyConn connector 2KA 012 271-0513)
With 1,300 mm cable and SUPERSEAL connector 2KA 012 271-0612)
Housing colour: white
With 2,000 mm cable and 6.3 mm flat receptacles 2KA 012 271-231
With 1,300 mm cable and EasyConn connector, 90° bent
2KA 012 271-271
Type approval: 2609
1) 2) 3)
Also available: KRONE rear combination lamp
You can find more detailed information starting in
chapter on rear combination lamps, page 61.
78
CLEARANCE LAMPS
LICENCE PLATE LIGHT
For licence plate 340 x 240 mm: Mounting above licence plate (1 lamp)Mounting on side of licence plate (2 lamps)
For licence plate 520 x 120 mm:Mounting on side or above licence plate (2 lamps)
Housing colour: black, 2 units
For screw mounting, 6.3 mm blade terminal and grommet 2KA 001 386-231
Spare parts/accessories
C5EW bulb
12 V 8GM 002 092-121
Type approval: 12820
LED CLEARANCE LIGHT
LED rubber arm clearance light, vertical mounting, protection class IP 6K9K, operating temperature -40°C to +50°C.
Functions LEDs Power Current
consumption
Side marker, position and clearance light
4 12 / 24 V
0.9 / 1.8 Wca. 0.08 A
With 500 mm cable and EasyConn connector (2-pin), 90°
Left 2XS 011 744-0111)
Right 2XS 011 744-0211)
With 3,000 mm cable and 6.3 mm flat receptacles
Left 2XS 011 744-0312)
Right 2XS 011 744-0412)
With 2,000 mm cable and AMP SUPERSEAL connector
Left 2XS 011 744-0513)
Right 2XS 011 744-0613)
With 500 mm cable and quick link
Left 2XS 011 744-1914)
Right 2XS 011 744-1814)
Type approval: 11392, 10R-057951
This LED product has the following features:
1) 2) 3) 4)
This product has the following features:
79
CLEARANCE LIGHTS
This LED product has the following features:
LED CLEARANCE LIGHT
LED rubber arm clearance light, quick mounting, protection class IP 6K9K, operating temperature -40°C to +50°C.
Functions LEDs Power Current
consumption
Side marker, position and clearance light
4 12 / 24 V
0.9 / 1.8 Wca. 0.08 A
With 500 mm cable and Quick Link connector 2XS 011 768-0011)
With 1,000 mm cable and EasyConn connector (2-pin), non-angled
2XS 011 768-0212)
With 2,000 mm cable and AMP SUPERSEAL connector 2XS 011 768-0313)
With 400 mm cable and DT connector 2XS 011 768-1174)
3)2)1) 4)
This LED product has the following features:
LED CLEARANCE LIGHT
LED rubber arm clearance light, horizontal mounting, protection class IP 6K9K, operating temperature -40°C to +50°C.
Functions LEDs Power Current
consumption
Side marker, position and clearance light
4 12 / 24 V
0.9 / 1.8 Wca. 0.08 A
With 500 mm cable and EasyConn connector (2-pin)
Left 2XS 011 769-0111)
Right 2XS 011 769-0211)
With 670 mm cable and Quick Link connector
Left 2XS 011 769-0912)
Right 2XS 011 769-1012)
1) 2)
80
CLEARANCE LAMPS / DIRECTION INDICATORS
CLEARANCE LAMP REAR LOGIC
For mounting on side of trailer. Cover lens for clearance light clear to the front, clear, red to the rear, yellow side marker reflector light.
Housing made of black plastic, with grommet
Screw fixation, left 2XS 007 841-011
Screw fixation, right 2XS 007 841-021
When using towing vehicles, the clear cover lens must be replaced against a black cover lens 9EL 148 673-021.
AUXILIARY INDICATOR
For surface mounting on the side, category 5 and 6 for 12 V and 24 V / 21 W, with bulb, GGVS / ADR-compliant.
Left 2BM 006 692-011
Right 2BM 006 692-021
Type approval: 0152621
AUXILIARY INDICATOR
For mounting on the side, category 6 for 24 V/21 W, without bulb, extremely flat design, ECE- und SAE-tested.
Amber Lens 2BM 008 355-001
Type approval: 1059 (P21W), 1848 (PY21W), SAE
This product has the following features:
This product has the following features:
This product has the following features:
81
DIRECTION INDICATORS
This LED product has the following features:
LED AUXILIARY INDICATOR CATEGORY 6
With black frame
Functions LEDs Power Current
consumption
Additional turn indicator
7 amber12 V / 4.8 W24 V / 3.5 W
0.4 A0.15 A
12 V, direct screw connection, AMP SUPERSEAL 2BM 011 788-0112)
12 V, direct screw connection, 500 mm cable, with open cable end
2BM 011 788-0311)
24 V, direct screw connection, AMP SUPERSEAL 2BM 011 788-0012)
24 V, direct screw connection, 500 mm cable, with open cable end
2BM 011 788-0211)
Spare parts/accessories
Black frame 9AB 194 559-007
AMP SUPERSEAL mating connector (AMP no. 282080-1) 8JA 746 184-022
Type approval: 7506, ECE, SAE, CCC
1) 2)
Direction of travel →
Frame version
This LED product has the following features:
LED AUXILIARY INDICATOR CATEGORY 6
Without frame
Functions LEDs Power Current
consumption
Additional turn indicator
7 amber12 V / 4.8 W24 V / 3.5 W
0.4 A0.15 A
12 V, self-adhesive, AMP SUPERSEAL 2BM 011 788-0512)
12 V, self-adhesive, 500 mm cable, with open cable end 2BM 011 788-0711)
24 V, self-adhesive AMP SUPERSEAL 2BM 011 788-0412)
24 V, self-adhesive, 500 mm cable, with open cable end 2BM 011 788-0611)
Spare parts/accessories
AMP SUPERSEAL mating connector (AMP no. 282080-1) 8JA 746 184-022
Type approval: ECE
1) 2)
Direction of travel →
Self-adhesive version
82
DIRECTION INDICATORS / POSITION LAMPS
HAZARD WARNING LIGHT MODEL 3003 ACCU
When the engine is running, the rechargeable battery is charged through contacts in the charging bracket. Automatic vehicle electrical system voltage changeover 12/24°V, operating time in flashing mode 40 hours or 7 hours with work light. Charging bracket and rechargeable lead-gel battery included in scope of delivery.
Type tested 2XW 007 146-011
HAZARD WARNING LIGHT MODEL 3003
With fastening bracket (for battery operation via 5 mono cells, not included).
Type tested 2XW 007 146-001
This LED product has the following features:
LED POSITION LIGHT WITH REFLECTOR
For horizontal and vertical mounting, white light, black housing and black plastic base plate. With horizontal mounting, the LED field must point to the outer edge of the vehicle. With vertical mounting, the LED field may point upward or downward. The light is fixed using the lateral mounting holes (for B4.2 screws) or by means of a bracket (to be ordered separately). Protection class IP 6K9K. ADR/GGVS-tested.
Functions LEDs Power Current
consumption
Position light (with reflector)
1 white 24 V / 0.9 W ca. 0.04 A
With 500 mm cable and open cable ends 2PG 008 645-9711)
With 1,300 mm cable with Quick-Link coupling 2PG 008 645-5412)
Type approval: 021395
1) 2)
83
POSITION LIGHTS
1) 3)2)
This LED product has the following features:
LED POSITION LIGHT WITH REFLECTOR
For horizontal mounting, white light, black housing and black plastic base plate. The light is fixed using the lateral mounting holes (for B4.2 screws) or by means of a bracket (to be ordered separately). Protection class IP 6K9K.
Functions LEDs Power Current
consumption
Position light (with reflector)
1 white 24 V / 0.9 W ca. 0.04 A
With 450 mm cable and AMP SUPERSEAL connector 2PG 008 645-8311)
Type approval: 021395
1)
This LED product has the following features:
LED TAIL LIGHT WITH REFLEX REFLECTOR
For horizontal or vertical mounting, red light, red lens, black housing and 2 holes for fastening screws B 4.2. Possible to mount using a bracket (to be ordered separately). Can also be used as a clearance light with reflex reflector. With pulse for direction indicator failure monitor.
With horizontal mounting, the LED field must point to the outer edge of the vehicle.For vertical mounting, the LED field can point upwards or downwards.
Functions LEDs Power Current
consumption
Tail light with reflex reflector
1 red 24 V / 1.2 W ca. 0.05 A
With 5,000 mm cable and EasyConn connector housing (2-pin)
2TM 008 645-3512)
With 5,000 mm cable with Quick-Link coupling incl. clamping piece for contacting a 2-wire flat cable.
2TM 008 645-6613)
With 500 mm cable 2TM 008 645-9511)
Type approval: 021395, 021398, SAE
84
POSITION LIGHTS
This LED product has the following features:
LED TAIL LIGHT WITH REFLEX REFLECTOR
With light guide, passive electronics, and ADR/GGVS tested, mounting via 5.8 mm screw holes, operating temperature -40°C to +50°C, protection class IP 6K9K. Tested to HELLA norm 67001 class 2 Approved for ECE.
Functions LEDs Power Current
consumption
Tail light with reflex reflector
2 24 V / 1.2 W0.05 A0.05 A
With 5,000 mm cable 2TM 345 600-3111)
Type approval: 5881
1)
This LED product has the following features:
LED POSITION LIGHT WITH REFLECTOR
For horizontal mounting, with 2 x 5.8 mm holes, passive electronics, ADR / GGVS-tested, operating temperatures of -40 °C to +50 °C, protection class IP 6K9K. Approved according to HELLA norm 67101, class 6.3.
Functions LEDs Power Current
consumption
Position light 2 white 24 V / 1.2 W 0.05 A
With 500 mm cable 2PG 345 600-401
Type approval: 5881
1)
85
Worklights
RokLUME
Ultra Beam
Power Beam
Oval
Q90
Modul 50/70/90
Flat Beam
Beacons
Front lighting
L 4060
Bi-LEDDipped beam and high beam
Premium
Performance
Rota LED Compact
K-LED Blizzard
ROTA LED
86
PRODUCT OVERVIEW
Auxiliary headlamps
Jumbo 320 FF
LED Light Bar
Luminator LEDLuminator Compact LED/X
Luminator Chromium
Rallye 3003Rallye 3003 Compact
Trailer rear lighting
Marker and clearance lights
LED clearance light
LED side marker light
LED license plate lamp
Repulse Pro
Hybrid and full LED rear combination lamp with
KRONE logo
"COLUNA" full LED rear
combination lamp
Rear lighting for truck
Full LED truck rear combination lamp
LED hybrid rear combination lamp
Hybrid and full LED rear combination lamp
87
Part no. Page
1AL…
1AL 009 998-001 44
1AL 009 998-021 44
1AL 009 998-041 44
1AL 010 820-021 43
1AL 012 758-001 43
1AL 012 758-021 43
1AL 012 758-101 43
1AL 012 758-121 43
1BL…
1BL 009 999-001 44
1BL 009 999-021 44
1BL 009 999-041 44
1BL 010 820-001 43
1BL 012 488-001 40
1BL 012 488-021 40
1BL 012 488-101 40
1BL 012 488-121 40
1BL 247 042-007 45
1BL 247 042-017 45
1BL 247 042-177 44, 45
1BL 247 042-217 44
1FO…
1F0 011 988-021 41
1F0 011 988-031 41
1F0 011 988-071 41
1F0 011 988-081 41
1F0 011 988-121 41
1F0 011 988-131 41
1F0 011 988-171 41
1F0 011 988-181 41
1F0 012 206-001 49
1F0 012 206-011 49
1F3 009 094-031 50
1F3 009 094-071 50
1F3 010 119-101 53
1F3 010 119-111 53
1F3 011 815-001 49
1F3 011 815-011 49
1F8 007 560-311 50
1F8 007 560-341 50
1F8 007 560-411 50
1F8 007 560-451 50
1F8 009 797-101 52
1F8 009 797-341 52
1F8 009 797-431 52
1F8 009 797-451 52
1F8 011 002-211 49
1F8 181 541-031 49
1FA…
1FA 996 197-151 48
1FA 996 197-181 48
Part no. Page
1FE…
1FE 008 773-001 51
1FE 008 773-011 51
1FE 008 773-041 51
1FE 008 773-081 51
1FJ…
1FJ 360 002-502 48
1FJ 958 040-072 48
1FJ 958 040-082 48
1FJ 958 130-011 47
1FJ 958 130-111 47
1FJ 958 130-301 47
1G0…
1G0 357 101-012 21
1G0 357 108-012 20
1G0 995 050-001 15
1G0 995 050-011 15
1G0 995 050-021 15
1G0 995 050-051 24
1G0 995 050-061 24
1G0 995 050-071 24
1G0 995 050-081 24
1G0 996 210-001 25
1G0 996 210-011 25
1G0 996 263-031 12
1G0 996 263-051 12
1G0 996 276-701 14
1G0 996 376-631 14
1G0 996 476-001 12
1G0 996 476-011 12
1G0 996 476-031 12
1G0 996 476-041 12
1G0 996 476-121 12
1G0 996 476-131 12
1G0 996 576-001 13
1G0 996 576-011 13
1G0 996 576-031 13
1G0 996 576-041 13
1G1…
1G1 357 105-022 22
1GA…
1GA 357 103-012 21
1GA 357 103-022 21
1GA 357 103-082 21
1GA 357 106-022 22
1GA 357 106-032 22
1GA 357 107-012 20
1GA 357 107-022 20
1GA 357 109-002 23
1GA 995 193-001 16
1GA 995 193-011 16
Part no. Page
1GA 995 193-021 16
1GA 995 193-031 16
1GA 995 193-041 16
1GA 995 506-001 10
1GA 995 506-011 10
1GA 995 506-031 10
1GA 995 506-081 10
1GA 995 606-001 9
1GA 995 606-011 9
1GA 995 606-071 9
1GA 995 606-081 9
1GA 995 606-171 9
1GA 996 188-501 10
1GA 996 188-511 10
1GA 996 197-001 9
1GA 996 197-021 9
1GA 996 197-031 9
1GA 996 197-041 9
1GA 996 284-001 11
1GA 996 284-011 11
1GA 996 284-081 11
1GA 996 284-091 11
1GA 996 488-001 10
1GA 996 488-011 10
1GA 996 761-001 15
1GA 996 761-011 15
1GA 996 761-021 15
1GA 996 761-101 11
1GA 996 761-111 11
1GA 996 761-171 11
1GA 996 761-191 11
1GD…
1GD 996 193-001 16
1GD 996 193-011 16
1GD 996 193-051 16
1GE…
1GE 360 000-002 23
1GJ…
1GJ 360 001-002 23
1GJ 360 002-002 23
1GJ 360 003-002 23
1GJ 958 040-501 17
1GJ 958 130-461 47
1HO…
1H0 996 376-491 13
1H0 996 476-501 13
1H0 996 476-511 13
1K0…
1K0 247 043-007 45
1K0 247 043-017 45
1K0 247 043-027 45
88
ORDER NUMBER OVERVIEW
Part no. Page
1K0 247 043-037 45
1K0 247 043-117 45
1K0 247 043-127 45
1K0 247 043-157 45
1K0 247 043-167 45
1KO 247 043-117 44
1KO 247 043-127 44
1KO 247 043-157 44
1KO 247 043-167 44
1LL…
1LL 009 998-011 44
1LL 009 998-051 44
1LL 010 820-031 43
1LL 012 758-011 43
1LL 012 758-111 43
1ML…
1ML 009 999-011 44
1ML 009 999-051 44
1ML 010 820-011 43
1ML 012 488-011 40
1ML 012 488-031 40
1ML 012 488-111 40
1ML 012 488-131 40
1ML 247 042-027 45
1ML 247 042-037 45
1ML 247 042-187 44, 45
1ML 247 042-227 44
1N0…
1N0 011 988-001 42
1N0 011 988-011 42
1N0 011 988-051 42
1N0 011 988-061 42
2BA…
2BA 980 888-211 68
2BA 980 888-311 67
2BA 980 888-411 67
2BA 980 888-511 67
2BA 980 888-611 67
2BM…
2BM 006 692-011 81
2BM 006 692-021 81
2BM 008 355-001 81
2BM 011 788-001 82
2BM 011 788-011 82
2BM 011 788-021 82
2BM 011 788-031 82
2BM 011 788-041 82
2BM 011 788-051 82
2BM 011 788-061 82
2BM 011 788-071 82
Part no. Page
2DA…
2DA 343 106-001 70
2DA 343 106-011 70
2DA 343 106-021 70
2DA 343 106-031 70
2DA 343 800-001 71
2DA 980 887-311 68
2DA 980 887-411 68
2KA…
2KA 001 386-231 79
2KA 003 389-001 78
2KA 003 389-061 78
2KA 010 278-011 77
2KA 010 278-021 77
2KA 010 278-121 77
2KA 010 278-311 77
2KA 010 278-321 77
2KA 010 278-421 77
2KA 012 271-031 78
2KA 012 271-051
2KA 012 271-061 78
2KA 012 271-231 61, 78
2KA 012 271-271 61, 78
2NE…
2NE 980 889-501 69
2NE 980 889-601 69
2NR…
2NR 013 155-201 66
2NR 013 155-211 66
2NR 013 155-221 66
2PG…
2PG 008 645-541 83
2PG 008 645-971 83
2PS…
2PS 008 645-001 75
2PS 008 645-311 75
2PS 008 645-621 75
2PS 008 645-891 75
2PS 008 645-991 75
2PS 345 600-011 74
2PS 962 964-012 74
2PS 962 964-031 74
2RL…
2RL 010 979-001 32
2RL 010 979-011 32
2RL 010 979-021 32
2RL 011 484-001 31
2RL 011 484-011 31
2RL 011 484-021 31
Part no. Page
2RL 012 983-301 33
2RL 012 983-401 33
2RL 014 979-001 31
2RL 014 979-011 31
2RL 014 979-021 31
2SB…
2SB 980 887-211 67
2SD…
2SD 013 155-001 66
2SD 013 155-011 66
2SD 013 155-021 66
2SD 013 155-031 66
2SD 013 155-101 66
2SD 013 155-111 66
2VD…
2VD 012 381-011 59
2VD 012 381-031 59
2VD 012 381-211 60
2VD 012 381-251 60
2VD 012 381-311 60
2VD 012 381-351 60
2VP…
2VP 012 381-021 59
2VP 012 381-041 59
2VP 012 381-051 59
2VP 012 381-061 59
2VP 012 381-081 59
2VP 012 381-221 60
2VP 012 381-241 60
2VP 012 381-261 60
2VP 012 381-281 60
2VP 012 381-321 60
2VP 012 381-341 60
2VP 012 381-361 60
2VP 012 381-381 60
2VP 340 960-011 63
2VP 340 960-021 63
2VP 340 960-111 63
2VP 340 960-121 63
2VP 340 960-231 61
2VP 340 960-241 61
2VP 340 960-251 61
2VP 340 960-261 61
2VP 340 960-271 63
2VP 340 960-281 63
2VP 340 961-011 62
2VP 340 961-021 62
2VP 340 961-031 62
2VP 340 961-041 62
2VP 340 961-111 62
2VP 340 961-121 62
2VP 340 961-131 62
89
Part no. Page
2VP 340 961-141 62
2VP 340 961-151 62
2VP 340 961-161 62
2VP 340 961-211 62
2VP 340 961-221 62
2VP 340 961-411 62
2VP 340 961-421 62
2VP 340 961-431 62
2VP 340 961-441 62
2VP 340 961-511 61
2VP 340 961-521 61
2VP 340 961-531 61
2VP 340 961-541 61
2VP 340 964-011 63
2VP 340 964-021 63
2VP 340 964-111 63
2VP 340 964-121 63
2VP 340 965-111 62
2VP 340 965-121 62
2VP 340 965-431 62
2VP 340 965-441 62
2VP 340 965-451 62
2VP 340 965-461 62
2VP 345 900-011 64
2VP 345 900-021 64
2VP 345 900-091 64
2VP 345 900-101 64
2VP 345 900-131 64
2VP 345 900-141 64
2XD…
2XD 011 557-101 33
2XD 011 557-201 33
2XD 011 557-301 33
2XD 011 557-811 33
2XD 011 557-841 33
2XD 012 160-801 37
2XD 012 160-811 37
2XD 012 160-821 37
2XD 012 160-831 37
2XD 012 160-851 37
2XD 012 160-861 37
2XD 012 160-901 37
2XD 012 160-911 37
2XD 012 160-951 37
2XD 012 160-961 37
2XD 012 878-001 32
2XD 012 878-011 32
2XD 012 878-021 32
2XD 012 972-001 31
2XD 012 972-011 31
2XD 012 972-021 31
2XD 012 980-001 32
2XD 012 980-011 32
2XD 012 980-021 32
2XD 012 984-301 33
Part no. Page
2XD 012 984-401 33
2XD 013 979-001 31
2XD 013 979-011 31
2XD 013 979-021 31
2XD 014 560-001 37
2XD 014 560-101 37
2XD 014 560-201 37
2XD 014 560-401 37
2XD 014 561-001 36
2XD 014 561-101 36
2XD 014 561-201 36
2XD 014 561-401 36
2XD 014 561-601 36
2XD 014 561-701 36
2XD 014 562-001 36
2XD 014 562-201 36
2XD 014 562-601 36
2XD 014 563-001 36
2XD 014 563-201 36
2XD 014 563-601 36
2XD 014 592-001 36
2XD 014 592-201 36
2XD 014 592-601 36
2XS…
2XS 007 841-011 81
2XS 007 841-021 81
2XS 011 744-011 79
2XS 011 744-021 79
2XS 011 744-031 79
2XS 011 744-041 79
2XS 011 744-051 79
2XS 011 744-061 79
2XS 011 744-181 79
2XS 011 744-191 79
2XS 011 768-001 80
2XS 011 768-021 80
2XS 011 768-031 80
2XS 011 768-117 80
2XS 011 769-011 80
2XS 011 769-021 80
2XS 011 769-091 80
2XS 011 769-101 80
2XW…
2XW 007 146-001 83
2XW 007 146-011 83
2ZR…
2ZR 012 456-001 71
2ZR 012 456-011 71
2ZR 012 456-021 71
2ZR 012 456-201 27
2ZR 012 456-211 27
2ZR 012 456-221 27
2ZR 980 889-011 69
Part no. Page
2ZR 980 889-111 69
2ZR 980 889-211 69
2ZR 980 889-311 69
2ZR 996 188-521 10, 26
2ZR 996 284-501 27
2ZR 996 284-511 27
2ZR 996 376-091 26
4DW…
4DW 009 492-011 59, 60
5DS…
5DS 227 488-101 59, 60
5KG…
5KG 011 630-101 35
8EN…
8EN 332 584-001 29
8GA…
8GA 002 071-131 78
8GA 002 071-251 78
8GA 002 071-271 78
8GH…
8GH 002 089-131 53
8GH 002 089-251 53
8GH 007 157-121 53
8GH 007 157-241 53
8GM…
8GM 002 092-121 79
8HG…
8HG 002 365-001 34
8HG 004 806-001 28
8HG 006 294-011 34
8HG 006 294-021 34
8HG 006 294-031 34
8HG 006 294-041 34
8HG 006 294-051 34
8HG 006 294-091 34
8HG 006 294-101 34
8HG 006 294-111 34
8HG 006 294-141 34
8HG 096 531-007 34
8HG 096 531-107 34
8HG 096 531-117 34
8HG 096 531-127 34
8HG 096 531-137 34
8HG 160 409-002 75
8HG 331 414-372 28
8HG 332 912-002 28
8HG 958 128-811 48
8HG 958 139-071 48
90
ORDER NUMBER OVERVIEW
Part no. Page
8HG 958 139-841 48
8HG 990 263-111 28
8HG 990 263-131 28
8HG 990 320-001 28
8HG 990 320-011 28
8HG 992 377-042 28
8HG 994 412-372 28
8HG 994 974-002 28
8JA…
8JA 009 256-801 29
8JA 201 022-801 29
8JA 201 022-831 29
8JA 746 184-022 82
8JA 990 295-217 29
8JB…
8JB 001 946-011 35
8JB 001 946-021 35
8JB 001 946-101 35
8JB 004 123-031 35
8JB 004 777-001 35
8JB 004 777-002 35
8JB 850 434-011 35
8JD…
8JD 158 175-807 29
8JD 990 295-037 29
8KB…
8KB 990 299-001 29
8KB 990 299-0119, 10, 11, 12, 14, 15, 23 24, 26, 29
8KB 990 299-311 29
8KB 990 299-331 29
8KB 990 299-361 29
8RA…
8RA 002 014-231 73
8RA 002 014-241 73
8RA 002 014-251 73
8RA 002 014-281 73
8RA 002 014-291 73
8RA 002 014-301 73
8RA 002 020-001 73
8RA 002 020-051 73
8RA 003 326-001 73
8RA 003 326-011 73
8RA 003 326-021 73
8RA 003 326-031 73
8RA 003 326-041 73
8RA 003 326-051 73
8XS…
8XS 958 337-021 47
8XS 958 337-031 47
Part no. Page
8XS 958 337-111 47
9AB…
9AB 194 559-007 82
9AG…
9AG 195 614-001 49
9AG 195 614-011 49
9AG 199 812-011 49
9EL…
9EL 183 432-031 61
9EL 183 432-041 61
9EL 208 551-001 60
9EL 208 551-011 59
9EL 213 522-001 66
9ES 199 813-001 49
9GH…
9GH 096 532-001 35
9GH 096 532-007 35
9XD…
9XD 990 298-001 28
9XD 990 298-031 28
9XS…
9XS 130 261-001 28
9XX…
9XX 340 814-017 66
91
92
NOTES
93
FOCUS ON CUTTING
EDGE TECHNOLOGY.
As the technological leader for intelligent light
distribution systems, halogen, xenon and full-
LED headlights, and as a partner to renowned
international automotive manufacturers, HELLA
always meets the highest expectations and
quality standards. We have also applied the same
quality standard to our range of bulbs:
Top technology in uncompromising quality that
has undergone rigorous testing. On the road,
this means optimal visibility thanks to premium
light quality and minimum failure rates thanks to
durable and long-lasting products.
The HELLA light bulb portfolio covers a broad
application range - and thus provides the right light
source for every need.
PORTFOLIO:
THE RIGHT PRODUCT FOR YOUR NEEDS
Whether proved standard lights, lifetime for longer
service life, Performance for more light output or
design for special appearances: the HELLA program
has it all!
STANDARD BLUE LIGHT PERFORMANCE
+ 120
CHROME TOP 2.0
HELLA GmbH & Co. KGaA
Rixbecker Straße 75
59552 Lippstadt, Germany
Tel.: +49 2941 38-0
Fax: +49 2941 38-7133
Internet: www.hella.com
© HELLA GmbH & Co. KGaA, Lippstadt
9Z2 999 141-624 J01509/DRA/11.18/0.043
Subject to technical and price modifications
Printed in Germany