Post on 27-Mar-2016
description
transcript
The Radiant Rollout™ Mat features a prefabricated, pre-pressurized network of Uponor crosslinked polyethylene (PEX-a) tubing for
efficient commercial radiant installations.
For Immediate Release Aug. 9, 2010 Contact: Ingrid Mattsson Brand Management Senior Manager (800) 321-4739, ext. 4249 ingrid.mattsson@uponor.com
Uponor Radiant Rollout™ Mat Offers 85% Installation Efficiency for Commercial Projects
A custom-designed,
prefabricated, pre-pressurized
network of Uponor crosslinked
polyethylene (PEX-a) tubing,
the Uponor Radiant Rollout™
Mat is the ideal solution for
faster, more consistent
installations for large
commercial radiant heating
and cooling applications — saving up to 85% in installation time.
The mat consists of Wirsbo hePEX™ (oxygen barrier) or Uponor
AquaPEX® (non-barrier) PEX-a tubing connected with ProPEX® engineered
plastic (EP) fittings, which are safe for burial in the slab and offer fast onsite
customization when necessary.
“Because it’s pre-packaged and pre-pressurized, the Radiant Rollout
Mat provides hassle-free commissioning of a radiant heating and cooling
system,” says Dan Sullivan, senior product manager, Commercial Radiant
Heating and Cooling, at Uponor. “Couple that with the built-in quality that
comes with Uponor systems, building professionals can feel confident they
are specifying a product that reduces mistakes and liabilities.”
Uponor Radiant Rollout™ Mat Page 2
At an Albuquerque, N.M. installation, the Radiant Rollout Mat allowed contractors to install the tubing in a matter of
days for a 15,000-square-foot pipe fabrication shop.
With the Radiant Rollout Mat, workers simply roll out tubing and fasten it down, requiring less strain on their muscles and backs.
The mat can install
about eight times faster than
conventional radiant tubing
installation methods,
potentially shaving weeks off
an installation schedule. For
example, six contractors can
install 35,000 square feet (16
to 19 mats) per day, as
opposed to 4,500 square feet
per day using conventional
installation methods.
Contractors will also appreciate less time on their hands and knees with the
Radiant Rollout Mat, saving on muscle and back strain.
“We didn’t have to
step through rebar squares
and bend over to attach it,”
says Steve Zamora, piping
foreman, Miller Bonded,
Inc. of Albuquerque, N.M.
“It was much better on the
back.”
For more
information about the Uponor Radiant Rollout Mat, including an informational
video, visit www.uponorpro.com.
Radiant Rollout Mat Construction Options
Length Customizable
Width 4½' for 9" on-center spacing; 5' for 6" on-center spacing; double mat option also available at 10' for 6" on-center spacing
Tubing Wirsbo hePEX (oxygen barrier) or Uponor AquaPEX (barrier free)
Distribution Flow Options
• In-slab with 3⁄4" reverse-return header • Wall manifold featuring the Uponor TruFLOW™ Classic
Supports Acetal polymer support braces every 7 feet and pre-drilled holes for stake and anchor supports
Uponor Radiant Rollout™ Mat Page 3
Uponor, Inc. is a leading supplier of plumbing, fire safety and radiant
heating and cooling systems for the residential and commercial building
markets in the United States. Uponor, Inc. employs 380 people at its North
American headquarters in Apple Valley, Minn. For more information, visit
www.uponor-usa.com or call (800) 321-4739.
For more information about Uponor, visit the Uponor media room
at http://uponor.oreilly-depalma.com/
For editorial assistance, contact John O’Reilly c/o O’Reilly/DePalma
at (815) 469-9100; e-mail: john.oreilly@oreilly-depalma.com
Hi-res versions of a photograph to accompany this release are
available for immediate download in .tif format by using this link:
http://uponor.oreilly-depalma.com/2010/efficient_radiant_heating_mat.shtml
© 2010 Uponor, Inc.
Uponor, Wirsbo, hePEX, AquaPEX, ProPEX, TruFLOW and Radiant Rollout are
trademarks or registered trademarks of Uponor Corporation and Uponor, Inc.