Usb Driver Installation Guide

Post on 12-Jul-2016

248 views 3 download

description

Upa Usb Driver Installation Guide

transcript

IContents

I

© 2010 ELRASOFT Ltd.

Table of ContentsPart I Introduction 2

Index 0

USB Driver Installation Guide2

© 2010 ELRASOFT Ltd.

1 Introduction

1. Log on as an Administrator in Windows2. Open Windows Control Panel >System >System Properties >Hardware tab.3. Click the Device Manager button.

Introduction 3

© 2010 ELRASOFT Ltd.

USB Driver Installation Guide4

© 2010 ELRASOFT Ltd.

3. Connect the usb module (UUSP, UUCAN or UULA) to the PC with an USB cable /Max. length 1.8m/4. Find UPA-USB in listed devices and click by right mouse button over it.5. Select Üpdate Driver Software.

Introduction 5

© 2010 ELRASOFT Ltd.

USB Driver Installation Guide6

© 2010 ELRASOFT Ltd.

6. Select Browse my computer for driver Software.7.Windows XP/Vista/7 32-bit:go to Program Files\ELRASOFT\UPA-USB Suite\USB Driver\Win_Xp_Vista_7_x32Windows XP/Vista/7 64-bit:go to Program Files\ELRASOFT\UPA-USB Suite\USB Driver\Win_Xp_Vista_7_x648. Select upausb.inf from the folder

Introduction 7

© 2010 ELRASOFT Ltd.

USB Driver Installation Guide8

© 2010 ELRASOFT Ltd.

Introduction 9

© 2010 ELRASOFT Ltd.

Windows Vista/7 32-bit and Windows XP 32-bit/64-bit

USB Driver Installation Guide10

© 2010 ELRASOFT Ltd.

Windows Vista/7 64-bit

Introduction 11

© 2010 ELRASOFT Ltd.

USB Driver Installation Guide12

© 2010 ELRASOFT Ltd.

9. Restart Windows and continuously press F8 when Windows is booted up until you get theAdvanced Boot Options, then select Disable Driver Signature Enforcement.

10. If he driver is installed successful you should see it in Device Manager

Introduction 13

© 2010 ELRASOFT Ltd.