Post on 19-Oct-2020
transcript
ase gmbh
ASE GmbH ∙ Schwedenstraße 24 ∙ 85051 Ingolstadt ∙ + 49 841 76229 ∙ asegermany.com ∙ mail @ asegermany.com
USB Type C Introduction
ase gmbh
ASE GmbH ∙ Schwedenstraße 24 ∙ 85051 Ingolstadt ∙ + 49 841 76229 ∙ asegermany.com ∙ mail @ asegermany.com
Cable Gen2 C Plug to C PlugC Plug to A Plug
Plug, R/A
Receptacle, Vertical
201620152014
USB 2.0
Receptacle, R/A: CH - 1.70 ~ 4.00
Plug, Formed Shell
Plug, Drawn Shell
Cable 5AC Plug to C PlugC Plug to A PlugC Plug to Micro-B Plug
Cable 3AC Plug to C PlugC Plug to A PlugC Plug to Micro-B Plug
Receptacle, R/A: CH - 1.70 ~ 4.00
Plug, Drawn Shell Cable Gen1C Plug to C PlugC Plug to A PlugC Plug to Micro-B Plug
Adapter Gen1C Plug to A Receptacle
USB 3.1
Plug, Vertical
Adapter:C Plug to HDMI ReceptacleC Plug to Displayport ReceptacleC Plug to VGA ReceptacleC Plug to Audio Jack ReceptacleC Plug to RJ45 Receptacle
Gen3 20G:PlugReceptacleCableAdapter
Cable:C Plug to HDMI PlugC Plug to Displayport PlugC Plug to VGA PlugC Plug to Audio Jack PlugC Plug to RJ45 Plug
Cable/Adapter with Optical Fiber
USB Type C
ase gmbh
ASE GmbH ∙ Schwedenstraße 24 ∙ 85051 Ingolstadt ∙ + 49 841 76229 ∙ asegermany.com ∙ mail @ asegermany.com
Spec Pix Mount Type CH (mm) Footprint
USB 3.1
Top Mount 1.60 ~ 3.60 2-Row DIP + 1-Row SMT
Middle Mount 0.85 ~ 1.45 2-Row DIP + 1-Row SMT
Middle Mount 0.00 ~ 0.70 2-Row DIP + 1-Row SMT
Middle Mount -1.65 ~ -0.45 2-Row DIP + 1-Row SMT
USB 3.0 Top Mount 4.00 2-Row DIP + 1-Row SMT
USB 2.0 Middle Mount 0.85 2-Row DIP + 1-Row SMT
Product list
ase gmbh
ASE GmbH ∙ Schwedenstraße 24 ∙ 85051 Ingolstadt ∙ + 49 841 76229 ∙ asegermany.com ∙ mail @ asegermany.com
EMI Pad
Insert Molding
Ground Plate
Shell
Insert Molding
EMI PadProduct structure
ase gmbh
ASE GmbH ∙ Schwedenstraße 24 ∙ 85051 Ingolstadt ∙ + 49 841 76229 ∙ asegermany.com ∙ mail @ asegermany.com
Production flow
Upper-molding Structure
Bottom-molding Structure
Insert Molding
Insert Molding
Assemble
ase gmbh
ASE GmbH ∙ Schwedenstraße 24 ∙ 85051 Ingolstadt ∙ + 49 841 76229 ∙ asegermany.com ∙ mail @ asegermany.com
1. Full covered metal shell for EMC improvement
2. Multiple shell DIPs to enhance overall strength
3. Protrusion on the main shell to stabilize the mated plug,
securing contact of the pins
4. Chamfer structure on the front edge of the main shell to smoothen insertion/withdrawal process and prevent the plastic
tongue from wear
5. Laser welding to increase the product structure strength
Design feature
ase gmbh
ASE GmbH ∙ Schwedenstraße 24 ∙ 85051 Ingolstadt ∙ + 49 841 76229 ∙ asegermany.com ∙ mail @ asegermany.com
Waterproof Class:IPX7: protected against immersion up to 1 m
CH (mm):0.65
L x W x H (mm):8.10 x 9.80 x 3.52
Footprint:2-Row SMT
Status:Sample available
I. Complete main shell with all holes sealed
Mylar
II. Edge of the main structure sealed with cement
Waterproof solution
ase gmbh
ASE GmbH ∙ Schwedenstraße 24 ∙ 85051 Ingolstadt ∙ + 49 841 76229 ∙ asegermany.com ∙ mail @ asegermany.com
Product list
ase gmbh
ASE GmbH ∙ Schwedenstraße 24 ∙ 85051 Ingolstadt ∙ + 49 841 76229 ∙ asegermany.com ∙ mail @ asegermany.com
Two types of shell
stamped shell
Stamped Shell Type
Drawn Shell Type
plastic Housing to locate PCB
clamp structure
drawn shell
ase gmbh
ASE GmbH ∙ Schwedenstraße 24 ∙ 85051 Ingolstadt ∙ + 49 841 76229 ∙ asegermany.com ∙ mail @ asegermany.com
Production flow
Assemble the main structureAssemble the side latches
Assemble the EMI RingsMylar
Assemble the main shell
ase gmbh
ASE GmbH ∙ Schwedenstraße 24 ∙ 85051 Ingolstadt ∙ + 49 841 76229 ∙ asegermany.com ∙ mail @ asegermany.com
Product list
de ResistanceepSepyT
Cable Type-C Plug to Type-A PlugFormed Shell USB 2.0/USB 3.1 Gen 1/Gen 2 3A/5A
Cable Type-C Plug to Type-A PlugDrawn Shell USB 2.0/USB 3.1 Gen 1/Gen 2 3A/5A
Cable Type-C Plug to Micro-B PlugFormed Shell USB 2.0 3A/5A
Cable Type-C Plug to Micro-B PlugDrawn Shell USB 2.0 3A/5A
Cable Type-C Plug to Type-C PlugFormed Shell USB 3.1 Gen 1/Gen 2 3A/5A
Cable Type-C Plug to Type-C PlugDrawn Shell USB 3.1 Gen 1/Gen 2 3A/5A
Adapter Type-C Plug to Type-A Recep.Forming Shell USB 2.0/USB 3.1 Gen 1/Gen 2 3A/5A
Adapter Type-C Plug to Type-A Recep.Drawn Shell USB 2.0/USB 3.1 Gen 1/Gen 2 3A/5A
Type
ase gmbh
ASE GmbH ∙ Schwedenstraße 24 ∙ 85051 Ingolstadt ∙ + 49 841 76229 ∙ asegermany.com ∙ mail @ asegermany.com
USB Type C capacity
Product Line Q2’15 (pcs/M) Q3’15 (pcs/M) Q4’15 (pcs/M)
Receptacle
Manual 800,000 1,000,000 1,000,000
Auto 1,000,000 2,000,000
Total 800,000 2,000,000 3,000,000
Plug (Drawn)
Manual 600,000 800,000 1,000,000
Auto 1,000,000 2,000,000
Total 600,000 1,800,000 3,000,000
Plug (Stamped)
Manual 400,000 400,000 800,000
Auto 500,000 1,000,000
Total 400,000 900,000 1,800,000
StartUSB Type CProduct listProduct structureProduction flowDesign featureWaterproof solutionProduct list 2Two types of shellProduction flowProduct list 3USB Type C capacity