Post on 19-Jul-2015
transcript
OD: Wall thickness: 159.0 up to 630.0 mm 3.0 up to 22.0 mm 6.25” up to 24.8” 0.12” up to 0.86” Lengths from 6 m (20 ft) up to 18 m (60 ft)
Pipe Range
Linepipe Supply
Steel grades PSL1: A (L210); B (L245);X42 (L290); X46 (L320);X52 (L360); X56 (L390);X60 (L415); X65 (L450);X70 (L485) PSL2: BN (L245N); BM (L245M);X42N (L290N); X42M (L290M);X46N (L320N); X46M (L320M); X52N (L360N); X52M (L360M);X56N (L390N); X56M (l390M);X60N (L415N); X60M (415M); X65M (L450M); X70 (L485M);X80M (L355M)
Outer diameter, inch (mm) 4 ½ (114,3) – 24 (610)
Wall thickness, inch (mm) 0.120 (3,05) –0.844 (21,44)
Pipe length, ft (m) 20(6,0) - 60(18,0)
API 5L (45th Edition)
ASTM A 53/A53M
Steel grades А, В
Outer diameter, inch (mm) 4 ½ (114,3) – 24 (610)
Wall thickness, inch (mm) 0.125 (3,18) – 0.844 (21,44)
Pipe length, ft (m) 20 (6,0) – 60 (18,0)
Linepipe Supply
Pipe dimensions in accordance with ASME B36/10M
Pipe dimensions in accordance with ISO 4200
Outer diameter, inch (mm)
Wall thickness, inch (mm) Outer diameter, inch (mm)
Wall thickness, inch (mm)
4 ½ (114,3) 0.120 – 0.237 (3,05 – 6,02) 4 ½ (114,3) 0.126 – 0.221 (3,2 – 5,6)
– – 6 ¼ (159,0) 0.158 – 0.315 (4,0 – 8,0)
6 5/8 (168,3) 0.172 – 0.312 (4,37 – 7,92) 6 5/8 (168,3) 0.158 – 0.315 (4,0 – 8,0)
8 5/8 (219,1) 0.203– 0.625 (5,16 – 15,88) 8 5/8 (219,1) 0.197 – 0.630 (5,0 - 16,0)
– – 9 5/8 (244,5) 0.197 – 0.630 (5,0 - 16,0)
10 ¾ (273,0) 0.203 – 0.844 (5,16 – 21,44) 10 ¾ (273,0) 0.197 – 0.787 (5,0 - 20,0)
12 ¾ (323,9) 0.203 – 0.844 (5,16 – 21,44) 12 ¾ (323,9) 0.197 – 0.787 (5,0 - 20,0)
14 (355,6) 0.250 – 0,312 (6,35 – 7,92) 14 (355,6) 0.248 – 0.787 (6,3 - 20,0)
– – 16 (406,4) 0.248 – 0.787 (6,3 - 20,0)
18 (457,0) 0.250 – 0.812 (6,35 – 20,62) 18 (457,0) 0.248 – 0.787 (6,3 - 20,0)
20 (508,0) 0.250 – 0.812 (6,35 – 20,62) 20 (508,0) 0.248 – 0.787 (6,3 - 20,0)
22 (559,0) 0.281 – 0.812 (7,14 – 20,62) 22 (559,0) 0.280 – 0.787 (7,1 - 20,0)
24 (610,0) 0.281 – 0.812 (7,14 – 20,62) 24 (610,0) 0.280 – 0.787 (7,1 – 20,0)
Plain-end casing pipes
API 5CT (9th Edition) Grades H40, J55, K55
Outer diameter, inch (mm) 6 5/8 – 20 (168,3 – 508,0)
Wall thickness, inch (mm) 0.264 – 0.656 (6,71 – 16,66)
Pipe length, ft (m) 25,0 – 42,0 (7,62 – 12,8)
Threaded casing pipes API 5CT (9th Edition)
Grades H40, J55, K55
Outer diameter, inch (mm) 6 5/8 – 10 3/4 (168,3 – 273,1)
Wall thickness, inch (mm) 0.231 – 0.450 (5,87 – 11,43)
Type of connection SC, LC, BC
Pipe length, ft (m) 25,0 – 42,0 (7,62 – 12,8)
Outer diameter, inch Outer diameter, mm
Wall thickness, inch
Wall thickness, mm Type of connection
H40 J55, K55
6-5/8 168,3 0.288 7,32 SС SС, LС, BС
0.352 8,94 — SС, LС, BС
7 177,8 0.231 5,87 SС —
0.272 6,91 SС SС
0.317 8,05 — SС, LС, BС
8-5/8 219,1 0.264 6,71 — SС
0.304 7,72 SС —
0.352 8,94 SС SС, LС, BС
0.400 10,16 — SС, LС, BС
9-5/8 244,5 0.312 7.92 SС —
0.352 8,94 SС SС, LС, BС
0.395 10,03 — SС, LС, BС
10-3/4 273,1 0.279 7,09 SС —
0.350 8,89 SС SС, BС
0.400 10,16 — SС, BС
0.450 11 ,43 — SС, BС
SС — short round thread casing, LС — long round thread casing, BС — buttress thread casing
Pressure pipe
EN 10217-1, EN 10217-2, EN 10217-3
Steel grades EN 10217-1: P195TR1, P195TR2; P235TR1, P235TR2; P265TR1, P265TR2 EN 10217-2: P195GH; P235GH; P265GH EN 10217-3: P275NL1; P275NL2;P355N; P355NH; P355NL1; P355NL2
Outer diameter, mm 168,3 – 610,0
Wall thickness, mm 4,0 – 20,0
Pipe length, m 6,0 – 18,0
Steel pipe for combustible fluids
EN 10208-1, EN 10208-2 Steel grades EN 10208-1:
L210GA, L290GA, L360GA EN 10208-2: L245NB, L290NB, L360NB, L290MB, L360MB, L415MB, L485MB
Outer diameter, mm 168,3 – 610,0
Wall thickness, mm 4,0 – 20,0
Pipe length, m 6,0 – 18,0
Outer diamater, mm Wall thickness, mm
4,0 4,5 5,0 5,6 6,3 7,1 8,0 8,8 10,0 11,0 12,5 14,2 16,0 17,5 20,0
168,3 ● ● ● ● ● ● ●
219,1 ● ● ● ● ● ● ● ● ●
273,0 ● ● ● ● ● ● ● ● ●
323,9 ● ● ● ● ● ● ● ● ●
355,6 ● ● ● ● ● ● ●
406,4 ● ● ● ● ● ● ●
457,0 ● ● ● ● ● ● ●
508,0 ● ● ● ● ● ● ● ● ●
559,0 ● ● ● ● ● ● ● ● ● ●
610,0 ● ● ● ● ● ● ● ● ● ●
It is possible to produce another pipe dimensions which will differ from those specified in the above table.
Structural round hollow sections
EN 10219-1, EN 10219-2 Steel grades S235JRH; S275J0H; S275J2H; S355J0H; S355J2H; S355K2H
Outer diameter, mm 114,0 – 610,0
Wall thickness, mm 3,0 – 20,0
Pipe length, m 6,0 – 18,0
Outer diamater, mm Wall thickness, mm
3,0 4,0 5,0 6,0 6,3 8,0 10,0 12,0 12,5 16,0 20,0
114,3 ● ● ● ●
168,3 ● ● ● ● ●
219,1 ● ● ● ● ● ● ●
244,5 ● ● ● ● ● ● ●
273,0 ● ● ● ● ● ● ●
323,9 ● ● ● ● ● ● ●
355,6 ● ● ● ● ● ● ● ●
406,4 ● ● ● ● ● ● ● ●
457,0 ● ● ● ● ● ● ● ●
508,0 ● ● ● ● ● ● ● ●
610,0 ● ● ● ● ● ●
ASTM A500/A500M
Steel grades А, В, С
Outer diameter, inch (mm) 4 ½ (114,3) – 24 (610)
Wall thickness, inch (mm) 0.125 (3,18) – 0.844 (21,44)
Pipe length, ft (m) 20 (6,0) – 60 (18,0)
Square and rectangular hollow sections
GOST 30245, GOST 25577, ASTM A500/A500M, EN 10219-1, EN 10219-2 Steel grades Carbon and low-alloy steel grades
Dimensions, mm Square hollow sections: 80х80 – 500х500 Rectangular hollow sections: 100х50 – 500х400
Wall thickness, mm 3,0 – 22,0
Pipe length, m 6,0 – 18,0 Dimensions of square hollow sections produced in accordance with GOST 30245, GOST 25577, GOST 13663, GOST R 54157, ASTM A500/A500M, EN 10219-1, EN 10219-2
Dimensions, mm
Wall thickness, mm
3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 7,0 7,5 8,0 8,5 9,0 9,5 10,0 10,5 11,0 11,5 12,0 12,5 14,0 16,0 19,0 20,0 22,0
80х80 ● ● ● ● ● ● ●
90х90 ● ● ● ● ● ● ●
100х100 ● ● ● ● ● ● ● ● ●
120х120 ● ● ● ● ● ● ● ● ●
140х140 ● ● ● ● ● ● ● ● ●
150х150 ● ● ● ● ● ● ● ● ●
160х160 ● ● ● ● ● ● ● ● ●
180х180 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
200х200 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
250х250 ● ● ● ● ● ● ● ● ● ● ● ● ●
300х300 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
350х350 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
400х400 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
450х450 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
500х500 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Square and rectangular hollow sections Dimensions of rectangular hollow sections produced in accordance with GOST 30245, GOST 25577, GOST 13663, GOST R 54157, ASTM A500/A500M, EN 10219-1, EN 10219-2
Dimensions, mm
Wall thickness, mm 3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 7,0 7,5 8,0 8,5 9,0 9,5 10,0 10,5 11,0 11,5 12,0 12,5 14,0 16,0 19,0 20,0 22,0
100х50 ● ● ● ● ● 100х60 ● ● ● ● ● ● ● 100х80 ● ● ● ● ● ● ● 120х60 ● ● ● ● ● ● ● 120х80 ● ● ● ● ● ● ● ● ● 140х60 ● ● ● ● ● ● ● ● ● 140х100 ● ● ● ● ● ● ● ● ● 140х110 ● ● ● ● ● ● ● 140х120 ● ● ● ● 150х50 ● ● ● ● ● ● ● 150х100 ● ● ● ● ● ● ● 150х130 ● ● ● ● ● ● ● ● ● 160х80 ● ● ● ● ● ● ● 160х120 ● ● ● ● ● ● ● ● ● 160х140 ● ● ● ● ● ● ● ● ● 180х60 ● ● ● ● ● ● ● ● ●
180х100 ● ● ● ● ● ● ● ● ● 180х120 ● ● ● ● ● ● ● ● ● 180х140 ● ● ● ● ● ● ● ● ● 200х80 ● ● ● ● ● ● ● ● ●
200х100 ● ● ● ● ● ● ● ● ●
Square and rectangular hollow sections Dimensions of rectangular hollow sections produced in accordance with GOST 30245, GOST 25577, GOST 13663, GOST R 54157, ASTM A500/A500M, EN 10219-1, EN 10219-2
Dimensions, mm
Wall thickness, mm
3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 7,0 7,5 8,0 8,5 9,0 9,5 10,0 10,5 11,0 11,5 12,0 12,5 14,0 16,0 19,0 20,0 22,0
200х120 ● ● ● ● ● ● ● ● ●
200х160 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
220х140 ● ● ● ● ● ● ●
240х120 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
240х150 ● ● ● ● ● ● ●
240х160 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
250х140 ● ● ● ● ● ● ●
250х150 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
260х130 ● ● ● ● ● ● ● ● ●
260х140 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
260х240 ● ● ● ● ● ● ● ● ● ● ● ● ●
300х100 ● ● ● ● ● ● ● ● ● ● ● ● ●
300х200 ● ● ● ● ● ● ● ● ● ● ● ● ●
350х150 ● ● ● ● ● ● ● ● ● ● ● ● ●
350х250 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
400х200 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
400х300 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
450х350 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
500х300 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
500х400 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Quality Assurance URALTRUBPROM products quality is certified to the national and international standards, QA system is approved by the international certification bodies.
API Spec Q1 certification API Spec 5L certification for PSL 1 and PSL 2 ISO 9001 : 2008 by TUV NORD, Germany ISO/TS 29001 by API Pressure Equipment Directive 97/23/EC Production control according to DIN EN 10219-1:2006 CE mark Customer approvals from companies in the oil & gas and construction industries