UV-5R.comFirst Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery.Programming Software... http://wouxun.us/Software/Baofeng/UV-5R Setup Files.zipUV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5rProgramming Manually... This is not covered in the owners manual, here’s how.

To program repeater 146.985, minus offset, 100 Hz tone, low power level, into Channel #010Turn on radio.If in Memory Mode switch to VFO Mode (VFO/MR)Select 5 KHz Step - (MENU + 1 + MENU) (Use the � � key for 5K) (MENU + EXIT)

Enter 146.985 The receive frequencyPress [MENU] + 2 + [MENU] Use the � � key to select Low PowerPress [MENU] + [EXIT] To accept and exitPress [MENU] + 5 + [MENU] Use the � � key to select Wide BandwidthPress [MENU] + [EXIT] To accept and exitPress [MENU] + 1 + 3 + [MENU] Use the � � key to select 100 Hz TonePress [MENU] + [EXIT] To accept and exitPress [MENU] + 2 + 7 + [MENU] Enter 010 or Use the � � key to select 010Press [MENU] + [EXIT] This stores the Receive Frequency

Radio prompts that REC FREQ has been storedEnter 146.385 The transmit frequencyPress [MENU] + 2 + 7 +[MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been stored

Return to Memory Mode (VFO/MR)

UV-5R.com

UV-5R.com

UV-5R.com

UV-5R.com

UV-5R.com

Please consider making a review of your radio on both our web site andeHam.net.

A favorable mention of UV-5R.com or Wouxun.US would be greatlyappreciated.

UV-5R.com