Post on 07-Dec-2015
description
transcript
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 1/22
Valve Standards 08000010
ANSI Valve StandardsAn overview of American National Standards Institute ANSI valve standards .API Valve StandardsAn overview of the American Petroleum Institute API valves standards.ASME Valve StandardsAn overview of The American Society of Mechanical Engineers ASME valvestandards.BS British Standard Valves An overview of British BS valve standards.Chinese and International Valve StandardsChinese valve standards compared with the international ISO, ASTM , ASME, ANSI,MSS, API and JIS standards.Chinese Valve StandardsChinese standards for steel, cast iron and metal valves.
ANSI Valve StandardsAn overview of American National Standards Institute ANSI valve standards
ANSI StandardCode Name ANSI Standard Name
ANSI A126 Grey iron castings for valves flanges and pipefittingsStandard specifications for forged or rolled steel
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 2/22
ANSI A181 pipe flanged forged fittings and valves and partsfor general service
ANSI B16.10 Face to face and end to end dimension offerrous valves
ANSI B16.34 Steel valvesANSI B127.1 Constant level oil valvess
API Valve StandardsAn overview of the American Petroleum Institute API valves standards
APIStandard
CodeName
API Standard Name
APISPEC6D
Supplement 1 to api spec 6D (sixteenth edition )specification for pipeline valves
APISTD6D
Steel gate plug ball and check valves for pipelineservice
APISTD6D
API Specification for flanged steel gate and plug valvesfor drilling and production service
APISPE14D
API Specification for wellhead surface safety valves foroffshore service
API 526 Flanged steel safety relief valves
API 527 Commercial seat tightness of safety relief valves withmetal to metal seats
API 528 API standard for safety relief valve nameplatenomenclature
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 3/22
API 529 Cast forged Steel plug valves flanged endsAPI 594 Wafer type check valvesAPI 595 Cast iron gate valves flanged endsAPI 597 Steel venturi gate valves flanged or butt welding endsAPI 598 Valve inspection and testAPI 599 Steel plug valves flanged or butt welding ends
API 600 Flanged and butt welding end steel gate and plugvalves for refinery use
API 602 Compact design carbon steel gate valves for refineryuse
API 603 150 pound light wall corrosion resistant gate valvesfor refinery use
API 604 Ductile iron gate valves flanged ends
API 607 Fire resistant testing of ball valves with soft contactfaces
API 609 Butterfly valves to 150 psig and 150 FAPI SPEC
6FA Specification for fire test for valves
API SPEC6FC
Specification for fire test for valves with automaticbackseats
API BULL6RS
Bulletin on referenced standards for committee 6,standardization of valves and wellhead equipment
API RP11V6
Recommended practice for design of continuous flowgas lift installations using injection pressure operatedvalves first edition
API RP11V7
Recommended practice for repair , testing, and settinggas lift valves
API RP520 PT 1
Sizing, selection and installation of pressure relievingdevices in refineries part 1 sizing and selection
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 4/22
API RP574
Inspection of piping, tubing, valves and fittings firstedition, replaces guide for inspection of refineryequipment Chapter XI
API RP576 Inspection of pressurerelieving devices first edition
API STD608 Metal ball valvesflanged, threaded and welding end
ASME Valve StandardsAn overview of The American Society of MechanicalEngineers ASME valve standards
ASME ValveStandard ASME Standard Name
ASMEA105/105M
Standard Specification for Carbon Steel Forgings forpiping applications
ASMEA181/181M
Standard Specification for Carbon Steel Forgings forGeneral purpose piping
ASMEA182/182M
Standard Specification for forged or rolled alloysteelpipe flanges, forged fittings and valves and parts forhightemperature service
ASMEA727/727M
Standard specification for carbon steel forgings forpiping components with inherent notch toughness.
ASME A961Standard Specification for Common Requirements forSteel Flanges, Forged Fittings, valves, and Parts forPiping ApplicationsStandard Specification for Forged or Rolled UNSN08020, UNS N08024, UNS N08026, UNS N08367,
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 5/22
ASME B462 and UNS R20033 Alloy Pipe Flanges, Forged Fittings,and Valves and Parts for Corrosive HighTemperature Service
ASME B834
Standard Specification for Pressure ConsolidatedPowder Metallurgy IronNickel ChromiumMolybdenum (UNS N08367) and Nickel ChromiumMolybdenum Columbium (Nb) (UNS N06625) AlloyPipe Flanges, Fittings, Valves, and Parts
ASMED5500
Standard Test Method for Vehicle Evaluation ofUnleaded Automotive Sparkignition Engine Fuel forIntake Valve Deposit Formation
ASME F885 Standard Specification for Envelope Dimensions forBronze Globe Valves NPS 1/4 to 2 El1996 R(1996)
ASME F992 Standard Specification for Valve Label Plates El1997R(1997)
ASME F993 Standard Specification for Valve Locking Devices El1997 R(1997)
ASME F1020 Standard Specification for LineBlind Valves formarine Applications El1996 RI'1996)
ASME F1098 Standard Specification for Envelope Dimensions forButterfly Valves NPS 2 to 24 EI1993 R(1993)
ASME F1271Standard Specification for Spill Valves for Use inMarine Tank Liquid Overpressure ProtectionsApplications EI1995 R (1995)
ASME F1370 Standard Specification for Pressure Reducing valvesfor Water Systems, Shipboard
ASME F1508 Standard Specification for Angle Style, Pressure ReliefValves for Steam, Gas, and Liquid Services
ASME F1565 Standard Specification for PressureReducing Valvesfor Steam Service
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 6/22
ASME F1792 Standard Specification for Special Requirements forValves Used in Gaseous Oxygen Service
ASME F1793Standard Specification for Automatic ShutOff Valves(Also Known as Excess Flow Valves, EFV) for Air orNitrogen Service
ASME F1794Standard Specification for Hand operated, GlobeStyle Valves for Gas (Except Oxygen Gas), andHydraulic Systems
ASME F1795 standard Specification for PressureReducing Valvesfor Air or Nitrogen Systems
ASME A230 Standard specification for steel wire oil temperedcarbon valve spring quality
ASME A232 Standard specification for chromium vanadiumalloy steel valve spring quality
ASME A350Standard specification for forged or rolled carbon andalloy steel flanges forged fittings and valves and partsfor low temperature service
ASME A338 Standard specification for ultrasonic examination ofheavy steel forgings
ASME A694Standard specification for forgings carbon and alloysteel for pipe flanges fittings valves and parts for high pressure transmission service
ASME A404Standards specification for forged or rolled alloy steel pipe flanges forged fittings and valves and partsspecially heat treated for high temperature service
ASME A522 Forged or rolled 8% and 9% nickel alloy steel flangesfittings valves and parts for low temperature service
BS British Standard Valves
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 7/22
An overview of British BS valve standards
BritishStandard
CodeName
BS
British Standard Name
BS 1212 Ball valves (Portsmouth type ) excluding floats
BS 1123 Specification for safety valves, gauges and other safetyfittings for air receivers and compressed air installations
BS 1414Specification for steel edge gate valves ( flanged and buttwelding ends ) for the petroleum, petrochemical andallied industries
BS 1552 Control plug cocks for low pressure gases
BS 1570Specification for Flanged and Butt welding ends steelplug valves for the petroleum industry (excluding well Head and flow line valves)
BS 1735Specification for Flanged cast iron outside screw and yoke edge gate valves class 125, size 1.5 in to 24 in for thepetroleum industry
BS 1868Specification for steel check valves (flanged and buttwelding ends ) for the petroleum, petrochemical andallied industries
BS 1873Specification for Steel globe and globe stop and checkvalves (flanged and buttwelding ends ) for thepetroleum, petrochemical and allied industries
BS 1952 Specification for copper alloy gate valves for generalpurposes
BS 1953 Copper alloy check valves for general purposesBS 1968 Floats for Ball valves ( copper )
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 8/22
BS 2060 Copper alloy screw down stop valves for generalpurposes
BS 2080
Specification for Face to face, centre to face end to end and centre to end dimensions of flanged and buttwelding ends steel valves for the petroleum,petrochemical and allied industries
BS 2591PT.1
British standard glossary for valves and valve parts (forfluids ) part 1.screw down stop ,check and gate valves
BS 2591PT.2
British standard glossary for valves and valves parts ( forfluids) part,2 safety valves and relief valves
BS2591PT.3
British standard glossary for valves and valve parts (forfluids ) part 3, Plug valves and cocks
BS2591PT.4
British standard glossary for valves and valves (for fluids) part4, butterfly valves
BS2591PT.5
British standard glossary for valves and valve parts ( forfluids ) part5, Ball valves
BS 2995Specification for cast and forged steel wedge gate, glove,check and plug valves screwed and socket Weldingsizes 2 in and smaller for the petroleum industry
BS 3464 Specification for cast iron gate valves for generalpurposes
BS 3808Specification for cast and forged steel flanged, screwedand socket welding Wedge gate valves (compact design) sizes 2 in and smaller for the petroleum industry
BS 3948 Specification for cast iron parallel slide valves for generalpurposes
BS 3952 Specification for cast iron butterfly valves for generalpurposes
BS 3961 Specification for cast iron screw down stop valves andstop and check valves for general purposes
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 9/22
BS 4090 Cast Iron check valves for general purposesBS 4133 Flanged steel parallel slide valves for general purposes
BS 4312 Flanged steel screw down stop valves and stop andcheck valves for general purposes
BS 4460 Steel Ball valves for the petroleum industry
BS 5146 Specification for inspection and test of steel valves for thepetroleum petrochemical and allied industries
BS 5150 Cast iron wedge and double disk gate valves for generalpurposes
BS 5151 Cast iron gate (parallel slide ) valves for general purposes
BS 5152 Cast iron globe and globe stop and check valves forgeneral purposes
BS 5153 Cast Iron check valves for general purposes
BS 5154 Copper alloy globe stop and check, check and gate valvesfor general purposes
BS 5155 Cast iron and carbon steel butterfly valves for generalpurposes
BS 5156 Screw down diaphragm valves for general purposesBS 5157 Steel gate (parallel slide ) valves for general purposes
BS 5159 Specification for cast iron and carbon steel ball valves forgeneral purposes
BS 5160Specification for Flanged steel globe valves, globe stopand check valves and lift type check valves for generalpurposes
BS 5351 Steel ball valves for the petroleum petrochemicals andallied industries
BS 5417 Test of genera purpose industrial valvesBS 5418 Marking of general purpose industrial valves
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 10/22
Chinese and International ValveStandardsChinese valve standards compared with theinternational ISO, ASTM , ASME, ANSI, MSS, API andJIS standards
ChineseStandard Code
Num.Chinese Standard Name Adopting
Standard
GB12220 General valve marking ISO 5209
GB12221 Flanged ends metal valve facetoface dimensions ISO 5752
GB12222 Multiturn valve connection ofdriving device ISO 5210/1 3
GB12223 Partturn valve connection ofdriving device ISO 5211/1 3
GB12224 Steel valve general requirements ANSI B16.34
GB12225General valve copper alloy
casting ware technologyrequirements
ASTM B584
GB12226 General valve gray casting irontechnology requirements
ISO 185,BS1452
GB12228 General valve carbon forgingsteel technology requirements
ASTM A105,A181
GB12229 General valve carbon castingsteel technology requirements ASTM A703
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 11/22
GB12230 General valve Ao casting steeltechnology requirements
ASTM A351
GB12232 General valve flanged ends irongate valve
ISO59961982,API 595
GB12233 General valve iron gate valveand lift check valve BS5152,5153
GB12234 General valve flanged and buttwelding ends copper gate valve API 600
GB12237 General valve flanged and buttwelding ends steel ball valve
ISO7121, API607
GB12238 General valve flanged and waferends butterfly valve BS5155
GB12239 General valve diaphragm valve BS5156,NFE29GB12240 General valve iron plug valve API 593
GB12241 Safety valve generalrequirements ISO 4126
GB12242 Safety valve characteristic testingsolution
ANSI/ASMEPTC25.3
GB12243 Direct spring loaded safety valve JIS B 8210
GB12244 Pressure reducing valve generalrequirements
JIS B8372,B8410
GB12245 Pressure reducing valve characteristic testing solution
JIS B8372,B8410
GB12246 Pilot operated pressure reducingvalve
JIS B 8372,DSS405
GB12247 Steam trap valve classification ISO 6704
GB12248 Steam trap valve technologyterms ISO 6552
GB12249 Steam trap valve marking ISO 6553
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 12/22
GB12250 Steam trap valve facetofacedimensions
ISO 6554
GB12251 Steam trap valve testing solution ISO6948,7841,7842
GB/T13927 General valve pressure testing ISO 5208JB/T689993 Valve fireproof test ISO10497
JB/T792795 Valve casting steel ware outformquality requirements MSS SP55
ZBJ1600690 Inspection and testing of valve API 598
Chinese Valve StandardsChinese standards for steel, cast iron and metal valves
Chinese Standard Code Num. Chinese Standard NameGB12220 General valve marking
GB12221 Flanged ends metal valve facetoface dimensions
GB12222 Multiturn valve connection ofdriving device
GB12223 Partturn valve connection ofdriving device
GB12224 Steel valve general requirements
GB12225 General valve copper alloy castingware technology requirements
GB12226 General valve gray casting irontechnology requirements
GB12227 General valve ductile casting irontechnology requirements
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 13/22
GB12228 General valve carbon forging steeltechnology requirements
GB12229 General valve carbon casting steeltechnology requirements
GB12230 General valve a casting steeltechnology requirements
GB12232 General valve flanged ends irongate valve
GB12233 General valve iron gate valve andlift check valve
GB12234 General valve flanged and buttwelding ends copper gate valve
GB12235 General valve flanged steel stopand lift check valve
GB12236 General valve steel swing checkvalve
GB12237 General valve flanged and buttwelding ends steel ball valve
GB12238 General valve flanged and waferends butterfly valve
GB12239 General valve diaphragm valveGB12240 General valve iron plug valveGB12241 Safety valve general requirements
GB12242 Safety valve characteristic testingsolution
GB12243 Direct spring loaded safety valve
GB12244 Pressure reducing valve generalrequirements
GB12245 Pressure reducing valve
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 14/22
characteristic testing solution
GB12246 Pilot operated pressure reducingvalve
GB12247 Steam trap valve classification
GB12248 Steam trap valve technologyterms
GB12249 Steam trap valve marking
GB12250 Steam trap valve facetofacedimensions
GB12251 Steam trap valve testing solutionGB/T13927 General valve pressure testing
GB/T13932 General valve iron swing checkvalve
GB/T15185 Iron and copper ball valve
GB/T15188.1 Valve facetoface dimensions buttwelding ends valve
GB/T15188.2 Valve facetoface dimensions wafer ends valve
GB/T15188.3 Valve facetoface dimensions female screwdown valve
GB/T15188.4 Valve facetoface dimensions male screw down valve
JB93 HandleJB94 Spanner
JB106 Valve marking and identifyingpaint
JB308 Valve type establishing way
JB/T450PN16.032.0Mpa forging angle typehighpressure valve, fastener and
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 15/22
technology requirements
JB451 Lever type safety valve technologyrequirements
JB1308 Pg(2500kgf/cm2)valve type and base
specification
JB1309 Pg(2500kgf/cm2)valve pipe andfastener technology requirements
JB/T1691 Valve key construction elementdimension of stem head
JB1692 Umbrella type hand wheelJB1693 Plane hand wheelJB1694 Valve stem nut (1)JB1695 Valve stem nut (2)JB1696 Valve stem nut (3)JB1698 Valve stem nut (5)JB1699 Valve stem nut (4)
JB1700.1 Locking nut (1)JB1700.2 Locking nut (2)JB1701 Valve stem nut (6)
JB1702.1 Bearing gland (1)JB1702.2 Bearing gland (2)JB1703 Sleeve linerJB1706 Pressing sleeve nutJB1708 GlandJB1709 T type boltJB1712 Asbestos packingJB1713 Packing seat(1)
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 16/22
JB1716 Packing seat(2)
JB/T1717 Valve construction key elementback seat ring dimensions
JB1718 Spacer (1)JB1719 Spacer (2)JB1720 Spacer (3)JB1721 Spacer (4)JB1726 Valve disc seatJB1727 Folio circleJB1728 Stop collar
JB/T1732 Valve construction key elementtaper sealing face dimensions
JB/T1733Valve construction key elementvalve body copper sealing facedimensions
JB/T1734Valve construction key elementwedge disc and valve disc coppersealing face dimensions
JB1735 Foot valve disc sealing ringJB1736 Swing check valve disc sealing ring
JB1737 Swing check valve disc sealing ringpressing board
JB/T1738
Valve construction key elementdimensions of wedge gate valvebody slide way and slide waygrooveValve construction key elementdimensions of wedge gate valvebody sealing plane clearance and
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 17/22
JB/T1739 wedge angle
JB/T1740Valve construction key elementdimensions of wedge disc sealingplane
JB1741 ThimbleJB1742 Adjusting ringJB1747 Packing ringJB1749 Ammonia valve disc
JB/T1750Valve construction key elementammonia valve body sealing planedimensions
JB/T175192Valve construction key elementsocket welding and fitting pipehead dimension
JB/T175292 Valve construction key elementmale screw ends head dimensions
JB175391 Joint ringJB175491 JointJB175591 Joint nut
JB/T175692 Valve construction key elementdimensions of bayonet joint ends
JB175791 BayonetJB175891 Bayonet nutJB175991 Bearing ringJB1760 91 Sixangle boltJB176191 Bolt ring
Valve construction key element
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 18/22
JB/T176292 spanner dimensions
JB220277 Direct spring loaded safety valvespecification
JB220377 Direct spring loaded safety valvefacetoface dimensions
JB220577 Reducing valve facetofacedimensions
JB220677 Reducing valve technologyrequirements
JB231178 Ball valve technology requirementsJB276581 Valve technology terms
JB276692 PN16.0 32.0Mpa dimensions offorging highpressure valve
JB/T276892 PN16.0 32.0Mpa Pipe, pipingfitting, valve head dimensions
JB/T276992 PN16.0 32.0Mpa screw flangeJB/T277092 PN16.0 32.0Mpa joint nutJB/T277192 PN16.0 32.0Mpa jointJB/T277292 PN16.0 32.0Mpa Blind plateJB/T277392 PN16.0 32.0Mpa double head bolt
JB/T277492 PN16.0 32.0Mpa double bolt endsand thread hole dimensions
JB/T277592 PN16.0 32.0Mpa nutJB/T277692 PN16.0 32.0Mpa lens ringJB/T277792 PN16.0 32.0Mpa Nonhole lens ring
JB/T277892 PN16.0 32.0Mpa temperaturemarking of pipe and fastener
JB332883 Air jar valve and pipeline valve
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 19/22
JB333983 Little type medical air jar frametype valve connection dimensions
JB5206.191 Packing gland (1)JB5206.291 Packing gland (2)JB5206.391 Packing gland (3)JB520791 Packing pressing plateJB520891 Separating circleJB520991 Plastics packingJB521091 Back sealing ringJB521191 Gate valve seat ring
JB/T529691General valve testing way of flowrate coefficient and flow resistantcoefficient
JB/T529891 Steel plate gate valve for pipe lineusing
JB/T529991 General valve Hydraulic actuatorbutterfly type check valve
JB/T530091 General valve material
JB/T643892 Valve sealing face plasma arcwelding technology requirements
JB/T643992Valve pressing casting steel ware magnetism powder flaw detectorinspection
JB/T644092 Valve pressing casting steel ware rax irradiating inspection
JB/T644192 Safety valve for compressorpurposeValve construction key elementGate valve (or disc) T type groove
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 20/22
JB/T649592 dimensions
JB/T649692 Valve construction key elementpacking dimensions
JB/T649792 Valve construction key elementstem head dimensions
JB/T649892Valve construction key element discand stem connection groovedimensions
JB/T689993 Valve fireproof testJB/T690093 Draught valveJB/T690193 Seal type glasses valve
JB/T690293 Valve casting steel ware hydraulicpenetrating inspection way
JB/T690393 Valve forging steel ware superwave inspection way
JB/T690493 Inspection and testing of air jarvalve
JB/T724894Technology terms of lowtemperature casting steel for valvepurpose
JB/T774495 Valve sealing face alloy powder forplasma arc welding
JB/T774595 Pipe line ball valve
JB/T774695 Diametershrinking forging steelvalve
JB/T774795 Needle type stop valve
JB/T774895Valve clearance degree andinspection way
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 21/22
JB/T774995 Technology terms of subzero valve
JB/T792795 Valve casting steel ware outformquality requirements
JB/T792895 General valve offer requirements
JB/Z24385 Gate valve static pressure length oflife test rules
JB/Z24485 Stop valve static pressure length oflife test rules
JB/Z24585 Plug valve static pressure length oflife test rules
JB/Z24685 Ball valve static pressure length oflife test rules
JB/Z24785 Valve electrically device length oflife test rules
JB/Z24885 Butterfly valve static pressurelength of life test rules
ZBJ1600287 Valve electrically driving apparatustechnology terms
ZBJ1600488 Reducing valve type and basingcoefficient
ZBJ1600690 Inspection and testing of valveZBJ1600790 Steam trap valve technology terms
ZBJ1600890Hydraulic petroleum gas deviceurgent shut down valve technology terms
ZBJ1600990 Valve pneumatic actuatortechnology terms
JB/T847396 Instrument valve series
10/2/2015 Valve standards
http://www.aalarm.no/valve%20standards.htm 22/22
JB/T852897 General valve electric actuator technology terms
JB/T852797 Metal sealing butterfly valve
JB/T852997 Explosionproof type valve electricactuator technology terms
JB/T853097 Valve electric actuator typeestablishing way
JB/T853197 Valve manual actuator technologyterms
JB/T867097
YBDF2 series explosionproof threephase asynchronous generator forvalve electric actuator purpose technology terms
13.12.2005