Post on 19-Mar-2020
transcript
Tailored solutions with highest efficiency
VDS Getriebe GmbHGewerbepark 6|4493 Wolfern/Steyr | Austria
Phone: +43 7253 88080-0 | Fax: +43 7253 88080-50e-Mail: office@vds-getriebe.at | Web: www.vds-getriebe.at
VDS Getriebe GmbH, located in Wolfern near Steyr in Austria, has specialized in the development of innovative driveline systems
for working machines.
The team of specialists, well experienced in developing CVTs from conceptual studies
to mass production, works out innovative solutions in latest driveline technology.
In addition to engineering services, VDS supplies powersplit components up to
complete CVT systems for niche markets.
Don‘t hesitate to get in touch with VDS to find a solution for your specific driveline request.
OUR
MOTIVATIONVTPVariable Twin Planet
Continuously variable transmissions for
• Agric tractors• Municipal vehicles• Telehandlers• Backhoe loaders• Wheel loaders• Handling machines• Forestry machines • ...
VPDVariable Power Divider
CVT module between engine and automatic T/M or synchrosplit T/M for
• ARFF trucks (Crash trucks)
• Sweepers• Municipal Vehicles• ...
VCSVehicle Control Software
Vehicle control and engine–T/M management
• On- and off-highway vehicles
• Agric tractors • Municipal vehicles• Construction machinery • ...
o VDS Systems
Your Partner for Innovative Drive Technology
www.vds-getriebe.at
Pho
to: F
otol
ia /
AK
-Dig
iArt
Pho
to: A
EB
I & C
o. A
G M
asch
inen
fabr
ik
vds_wickelfalz_fein.indd 1 28.10.15 18:26
Tailored solutions with highest efficiency
VDS Getriebe GmbHGewerbepark 6|4493 Wolfern/Steyr | Austria
Phone: +43 7253 88080-0 | Fax: +43 7253 88080-50e-Mail: office@vds-getriebe.at | Web: www.vds-getriebe.at
VDS Getriebe GmbH, located in Wolfern near Steyr in Austria, has specialized in the development of innovative driveline systems
for working machines.
The team of specialists, well experienced in developing CVTs from conceptual studies
to mass production, works out innovative solutions in latest driveline technology.
In addition to engineering services, VDS supplies powersplit components up to
complete CVT systems for niche markets.
Don‘t hesitate to get in touch with VDS to find a solution for your specific driveline request.
OUR
MOTIVATIONVTPVariable Twin Planet
Continuously variable transmissions for
• Agric tractors• Municipal vehicles• Telehandlers• Backhoe loaders• Wheel loaders• Handling machines• Forestry machines • ...
VPDVariable Power Divider
CVT module between engine and automatic T/M or synchrosplit T/M for
• ARFF trucks (Crash trucks)
• Sweepers• Municipal Vehicles• ...
VCSVehicle Control Software
Vehicle control and engine–T/M management
• On- and off-highway vehicles
• Agric tractors • Municipal vehicles• Construction machinery • ...
o VDS Systems
Your Partner for Innovative Drive Technology
www.vds-getriebe.at
Pho
to: F
otol
ia /
AK
-Dig
iArt
Pho
to: A
EB
I & C
o. A
G M
asch
inen
fabr
ik
vds_wickelfalz_fein.indd 1 28.10.15 18:26
o Product Management
Concepts• Transmission layout• Packaging, installation investigations
Layout design• Driveline and Transmission schemes • Bill of material• Hydraulic scheme• Hydraulic design• Design of all parts, including gears, shafts,
turning parts, milled parts, cast and forged parts, etc.
Detailed design• Coordination with suppliers• Single part drawings• Assembly and installation drawings
Our Tools:• CATIA V5 R19• CATIA V5-6R2012 CATIA/ENOVIA V6• ePlan electric P8• ePlan harness proD
o Calculation / Analysis / Simulation
Assembly• First assembly / disassemblies• Documentation in gearbox passes
Measurement techniques on test objects and vehicles• Application of required sensors• Measurement data acquisition and evaluation
Functional testing on rigs• Lubrication investigation and optimization• Tilting tests• Low temperature tests• Drag torque measurements, efficiency
measurements
Endurance testing on test rigs• (Quasi static) test programs derived
from duty cycles• Dynamic testing of drivetrains
Vehicle testing• Transmission functional testing in vehicles • Endurance testing (field application etc.)
Model based software development in Mathworks MATLAB / Simulink• Transmission controller• Vehicle controller
Software development for test benches• Functional tests• Endurance tests • End-of-line test bench
Operators controls and display devices• Programming of displays• Integration of driver interface and driver
information systems
Electrics• Development of vehicle wiring using
ePlan P8
Additional services• CAN bus analyses / reverse engineering• C, C++, C#, CodeSys programming
Transmission Concepts• Performance calculation• Component selection• Full load characteristics• Drive cycle simulation• Fuel consumption• Load spectra• Basic dimensioning• Space requirements
Transmission Development• Analysis and Optimization• Tooth profile and line modifications to
enhance endurance and smoothness• Planetary gear drives, power-split systems• Shafts and bearings• Multi-disk clutches, dog clutches• Bevel gear sets• Material and heat treatment• Gear manufacturing technology• Prototype and serial costs
Special Services• Trouble-shooting at testing and in operation• Programming of specific calculation tools
Set up of product strategy
Analyses of market and competitors
Benchmarks
Evaluation of customer needs
Definition of requirements
Set up of specifications
Market introduction of new products
Product improvements
Support of sales
o Control Systems / Software
o Design o Testing / Measurements / Test rigs
o Engineering Process
Concept• Specification• Concept creation and evaluation• Basic dimensioning• System and transmission layout Detail design• Detailed design in 3D and 2D drawings • Dimensioning / calculation• Finite element analysis • Software development
Functional prototype• Supplier selection• Parts procurement• Quality assurance • Prototype assembly• Functional tests Validation• Endurance tests on test benches• Vehicle integration • Software application • Field tests Series introduction• System optimization • Product cost optimization • End-of-line test• Support series run up
www.vds-getriebe.at
Pho
to: F
otol
ia |
eve
ryth
ingp
ossi
ble
Pho
to: F
otol
ia |
Shu
tterb
as
Pho
to: V
DS
Pho
to: F
otol
ia |
pavl
odar
Pho
to: D
ream
stim
e | J
uri B
izga
jmer
Pho
to: M
akau
le |
Dre
amst
ime
vds_wickelfalz_fein.indd 2 28.10.15 18:26
o Product Management
Concepts• Transmission layout• Packaging, installation investigations
Layout design• Driveline and Transmission schemes • Bill of material• Hydraulic scheme• Hydraulic design• Design of all parts, including gears, shafts,
turning parts, milled parts, cast and forged parts, etc.
Detailed design• Coordination with suppliers• Single part drawings• Assembly and installation drawings
Our Tools:• CATIA V5 R19• CATIA V5-6R2012 CATIA/ENOVIA V6• ePlan electric P8• ePlan harness proD
o Calculation / Analysis / Simulation
Assembly• First assembly / disassemblies• Documentation in gearbox passes
Measurement techniques on test objects and vehicles• Application of required sensors• Measurement data acquisition and evaluation
Functional testing on rigs• Lubrication investigation and optimization• Tilting tests• Low temperature tests• Drag torque measurements, efficiency
measurements
Endurance testing on test rigs• (Quasi static) test programs derived
from duty cycles• Dynamic testing of drivetrains
Vehicle testing• Transmission functional testing in vehicles • Endurance testing (field application etc.)
Model based software development in Mathworks MATLAB / Simulink• Transmission controller• Vehicle controller
Software development for test benches• Functional tests• Endurance tests • End-of-line test bench
Operators controls and display devices• Programming of displays• Integration of driver interface and driver
information systems
Electrics• Development of vehicle wiring using
ePlan P8
Additional services• CAN bus analyses / reverse engineering• C, C++, C#, CodeSys programming
Transmission Concepts• Performance calculation• Component selection• Full load characteristics• Drive cycle simulation• Fuel consumption• Load spectra• Basic dimensioning• Space requirements
Transmission Development• Analysis and Optimization• Tooth profile and line modifications to
enhance endurance and smoothness• Planetary gear drives, power-split systems• Shafts and bearings• Multi-disk clutches, dog clutches• Bevel gear sets• Material and heat treatment• Gear manufacturing technology• Prototype and serial costs
Special Services• Trouble-shooting at testing and in operation• Programming of specific calculation tools
Set up of product strategy
Analyses of market and competitors
Benchmarks
Evaluation of customer needs
Definition of requirements
Set up of specifications
Market introduction of new products
Product improvements
Support of sales
o Control Systems / Software
o Design o Testing / Measurements / Test rigs
o Engineering Process
Concept• Specification• Concept creation and evaluation• Basic dimensioning• System and transmission layout Detail design• Detailed design in 3D and 2D drawings • Dimensioning / calculation• Finite element analysis • Software development
Functional prototype• Supplier selection• Parts procurement• Quality assurance • Prototype assembly• Functional tests Validation• Endurance tests on test benches• Vehicle integration • Software application • Field tests Series introduction• System optimization • Product cost optimization • End-of-line test• Support series run up
www.vds-getriebe.at
Pho
to: F
otol
ia |
eve
ryth
ingp
ossi
ble
Pho
to: F
otol
ia |
Shu
tterb
as
Pho
to: V
DS
Pho
to: F
otol
ia |
pavl
odar
Pho
to: D
ream
stim
e | J
uri B
izga
jmer
Pho
to: M
akau
le |
Dre
amst
ime
vds_wickelfalz_fein.indd 2 28.10.15 18:26
o Product Management
Concepts• Transmission layout• Packaging, installation investigations
Layout design• Driveline and Transmission schemes • Bill of material• Hydraulic scheme• Hydraulic design• Design of all parts, including gears, shafts,
turning parts, milled parts, cast and forged parts, etc.
Detailed design• Coordination with suppliers• Single part drawings• Assembly and installation drawings
Our Tools:• CATIA V5 R19• CATIA V5-6R2012 CATIA/ENOVIA V6• ePlan electric P8• ePlan harness proD
o Calculation / Analysis / Simulation
Assembly• First assembly / disassemblies• Documentation in gearbox passes
Measurement techniques on test objects and vehicles• Application of required sensors• Measurement data acquisition and evaluation
Functional testing on rigs• Lubrication investigation and optimization• Tilting tests• Low temperature tests• Drag torque measurements, efficiency
measurements
Endurance testing on test rigs• (Quasi static) test programs derived
from duty cycles• Dynamic testing of drivetrains
Vehicle testing• Transmission functional testing in vehicles • Endurance testing (field application etc.)
Model based software development in Mathworks MATLAB / Simulink• Transmission controller• Vehicle controller
Software development for test benches• Functional tests• Endurance tests • End-of-line test bench
Operators controls and display devices• Programming of displays• Integration of driver interface and driver
information systems
Electrics• Development of vehicle wiring using
ePlan P8
Additional services• CAN bus analyses / reverse engineering• C, C++, C#, CodeSys programming
Transmission Concepts• Performance calculation• Component selection• Full load characteristics• Drive cycle simulation• Fuel consumption• Load spectra• Basic dimensioning• Space requirements
Transmission Development• Analysis and Optimization• Tooth profile and line modifications to
enhance endurance and smoothness• Planetary gear drives, power-split systems• Shafts and bearings• Multi-disk clutches, dog clutches• Bevel gear sets• Material and heat treatment• Gear manufacturing technology• Prototype and serial costs
Special Services• Trouble-shooting at testing and in operation• Programming of specific calculation tools
Set up of product strategy
Analyses of market and competitors
Benchmarks
Evaluation of customer needs
Definition of requirements
Set up of specifications
Market introduction of new products
Product improvements
Support of sales
o Control Systems / Software
o Design o Testing / Measurements / Test rigs
o Engineering Process
Concept• Specification• Concept creation and evaluation• Basic dimensioning• System and transmission layout Detail design• Detailed design in 3D and 2D drawings • Dimensioning / calculation• Finite element analysis • Software development
Functional prototype• Supplier selection• Parts procurement• Quality assurance • Prototype assembly• Functional tests Validation• Endurance tests on test benches• Vehicle integration • Software application • Field tests Series introduction• System optimization • Product cost optimization • End-of-line test• Support series run up
www.vds-getriebe.at
Pho
to: F
otol
ia |
eve
ryth
ingp
ossi
ble
Pho
to: F
otol
ia |
Shu
tterb
as
Pho
to: V
DS
Pho
to: F
otol
ia |
pavl
odar
Pho
to: D
ream
stim
e | J
uri B
izga
jmer
Pho
to: M
akau
le |
Dre
amst
ime
vds_wickelfalz_fein.indd 2 28.10.15 18:26
Tailored solutions with highest efficiency
VDS Getriebe GmbHGewerbepark 6|4493 Wolfern/Steyr | Austria
Phone: +43 7253 88080-0 | Fax: +43 7253 88080-50e-Mail: office@vds-getriebe.at | Web: www.vds-getriebe.at
VDS Getriebe GmbH, located in Wolfern near Steyr in Austria, has specialized in the development of innovative driveline systems
for working machines.
The team of specialists, well experienced in developing CVTs from conceptual studies
to mass production, works out innovative solutions in latest driveline technology.
In addition to engineering services, VDS supplies powersplit components up to
complete CVT systems for niche markets.
Don‘t hesitate to get in touch with VDS to find a solution for your specific driveline request.
OUR
MOTIVATIONVTPVariable Twin Planet
Continuously variable transmissions for
• Agric tractors• Municipal vehicles• Telehandlers• Backhoe loaders• Wheel loaders• Handling machines• Forestry machines • ...
VPDVariable Power Divider
CVT module between engine and automatic T/M or synchrosplit T/M for
• ARFF trucks (Crash trucks)
• Sweepers• Municipal Vehicles• ...
VCSVehicle Control Software
Vehicle control and engine–T/M management
• On- and off-highway vehicles
• Agric tractors • Municipal vehicles• Construction machinery • ...
o VDS Systems
Your Partner for Innovative Drive Technology
www.vds-getriebe.at
Pho
to: F
otol
ia /
AK
-Dig
iArt
Pho
to: A
EB
I & C
o. A
G M
asch
inen
fabr
ik
vds_wickelfalz_fein.indd 1 28.10.15 18:26