Post on 22-Mar-2016
description
transcript
Vector and Vector Resolution
Vector and Vector ResolutionScalar
Vector
Vectors
Vector AdditionVECTOR ADDITION If 2 similar vectors point in the SAME direction, add them.Example: A man walks 54.5 meters east, then another 30 meters east. Calculate his displacement relative to where he started.
Vector SubtractionVECTOR SUBTRACTION - If 2 vectors are going in opposite directions, you SUBTRACT.Example: A man walks 54.5 meters east, then 30 meters west. Calculate his displacement relative to where he started.
More Examples
Vectors Are Typically Drawn to Scale
So How Do We Add These?
Pythagorean Theorem
Example
Resultant and ComponentsResultant - The result from adding or subtracting vectors.
Components- The legs of the triangle or the parts that make up the resultant.Adding Vectors that are at different anglesHead to Tail Method easiest method to use to add vectors; always add vectors head to tail
Parallelogram Method- another way to add vectors
Graphical Method- another way to add vectors; involves drawing to scale and measuringExampleEric leaves the base camp and hikes 11 km, north and then hikes 11 km east. Determine Eric's resulting displacement.
Parallelogram method
Graphical Method
The order does not matter!Same three vectors added in a different order.Same resultant
Animation
Resultants
Tail Wind
Head Wind
Cross Wind
To calculate velocity(100 km/hr)2+ (25 km/hr)2= R210000 km2/hr2+ 625 km2/hr2= R210625 km2/hr2= R2SQRT(10 625 km2/hr2) = R103.1 km/hr = RVectors include direction!Therefore anytime we are dealing with a direction we must give direction. If it is not due north, south, east, or west, an angle must also be given.tan q= (opposite/adjacent)tan q= (25/100)q = inverse tan (25/100)q = 14.0 degrees
Direction should be given from one of the cardinal directions on the earth.
Animation
ExampleA boat moves with a velocity of 15 m/s, N in a river which flows with a velocity of 8.0 m/s, west. Calculate the boat's resultant velocity with respect to due north.
Sometimes we need to find the components of a vectorVector resolution is the process of breaking down one vector into its parts called components.Components are two vectors added together which give the resultant.When asked or necessary, you will need to find the values of both components.These are generally given from a cardinal direction on the earth (N,S, E, W) or horizontal or vertical.ExampleA plane moves with a velocity of 63.5 m/s at 32 degrees South of East. Calculate the plane's horizontal and vertical velocity components.