transcript
- 1. www.WinTips.org How to setup a VPN client connection In
Windows 8, 7 or Vista By:
- 2. Go to Start menu & open Control Panel Windows 7,
Vista
- 3. 1. Press Windows + R keys to load the Run dialog box.
Windows 8 & 8.1 (Vista, 7) 2. Type control panel and press
OK.
- 4. Open Network and Sharing Center
- 5. Click Set up a new connection or network.
- 6. Highlight the Connect to a workplace option and click
Next.
- 7. Click Use my Internet connection (VPN).
- 8. Type the VPNs server public IP Address and optional give a
destination name for this connection: (e.g. VPN_Office). Click
Next.
- 9. Type your (VPN) user name and password and click
Connect.
- 10. If the VPN client security & connections settings (User
Name & Password) are correct, then you should successfully
connect to your VPN network. * *Note: If you cannot connect to the
VPN server, then check the VPN connection & security settings
with your network administrator. In many cases, the VPN server
configuration may differ from default installation configuration. *
To view the status of the VPN connection once connected, click the
network icon in your system tray.
- 11. If you want to disconnect from VPN, then click the VPN
connection name (e.g. VPN_Office) and click Disconnect.
- 12. To connect to VPN again, press the network icon at your
system tray, select the VPN connection (e.g. VPN_Office) and click
Connect.
- 13. Thats it!
- 14. www.WinTips.org If this guide has helped you, it's now your
turn to help others by spreading the word. Please like / share this
video, or go to www.wintips.org and like us on facebook, click G+
or leave a comment. Thanks.