Post on 17-Nov-2019
transcript
WB Two Ram WB
Two
Ram
Wide Box Two Ram SeriesBaler type: Wide box two ram baler with shear
Safety: Meets all current ANSI 245.51 Safety Standards
Key Features:Models: W721, W828Nominal Feed Opening: 87” x 60”, 110” x 60” (long side-no stamper)Nominal Bale Size: 60” x 30” x 45”Main Cylinder: 12” bore trunnion designMain Ram Penetration: Deep penetration into bale chamberSystem Pressure: 3000 psi (W721), 3500 psi (W828)Main Motor: Twin 50, Twin 75 HP, or Triple 75 HP (Model W828 only)Feed Type: Conveyor, loaderWire Tying: Accent 470 or L&P Pinnacle II standard; Plastic strapping optionalShear: Serrated blade standard (straight blades optional)Door: Combination bale release and bale separation doorOptional: Hydraulic stamper at the shear
Suitable for baling:OCC, ONP, MOWHigh grade paperTin and aluminum cansPlastic buckets and drumsVented PET & HDPE containersCopper and aluminum radiatorsOld aluminum sheetLight aluminum extrusions & sidingAluminum & copper insulated wire
08/01/14
Bellevue, Ohio800-843-7512
www.americanbaler.com
Model W409D Mo
del W
409D
Model W409DBaler type: Wide box two ram baler with shear
Safety: Meets all current ANSI 245.51 Safety Standards
Key Features:Nominal Feed Opening: 40” x 60”Nominal Bale Size: 60” x 30” x 45”Main Cylinder: 8” bore trunnion designMain Ram Penetration: Deep penetration into bale chamberSystem Pressure: 3000 psi Main Motor: 30 HPFeed Type: Conveyor, loaderWire Tying: Accent 470 standardShear: Serrated shear blade standardBale Retention: Automatic hydraulic bale sizing flapOptional: Vertical bale separation door
Suitable for baling:OCCONPMOWTin and aluminum cansVented PET & HDPE containersShredded paperPrinter’s waste
08/01/14
Bellevue, Ohio800-843-7512
www.americanbaler.com
NB Two Ram
NB
Two
Ram
Narrow Box Two Ram SeriesBaler type: Narrow box two ram baler with shear
Safety: Meets all current ANSI 245.51 Safety Standards
Key Features: Models: N520, N620Nominal Feed Opening: 74” x 43”; 82” x 43” (long side-no stamper)Nominal Bale Size: 60” x 30” x 45”Main Cylinder: 10” bore trunnion designMain Ram Penetration: Deep penetration into bale chamberSystem Pressure: 3000 psi Main Motor: 50, 75, Twin 50 or Twin 75 HPFeed Type: Conveyor, loaderWire Tying: Accent 470 or L&P Pinnacle II standardShear: Serrated blade standard (straight blades optional)Door: Combination bale release and bale separation doorOptional: Hydraulic stamper at the shear
Suitable for baling:OCC, ONP, MOWHigh grade paperTin and aluminum cansPlastic buckets and drumsVented PET & HDPE containersCopper and aluminum radiatorsOld aluminum sheetLight aluminum extrusions & sidingAluminum & copper insulated wire
08/01/14
Bellevue, Ohio800-843-7512
www.americanbaler.com