Post on 29-Nov-2018
transcript
*Photo may include optional equipment.
PLEASE CONTACT
www.hyundai-ce.com 2012. 07 Rev.2
ISO Standard cabin All-weather steel cab with 360O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(LH) Lockable door Hot & cool box Storage compartment & Ashtray Cabin roof-steel cover Radio / USB Player 12 volt power outlet (24V DC to 12V DC converter) Computer aided power optimization (New CAPO) system 3-power mode, 2-work mode, User mode Auto deceleration & one-touch deceleration system Auto warm-up system Auto overheat prevention system Automatic climate control Air conditioner & heater Defroster Self-diagnostics system Starting Aid (air grid heater) for cold weather Centralized monitoring LCD display Engine speed or Trip meter/Accel. Clock Gauges Fuel level gauge Engine coolant temperature gauge Hyd. oil temperature gauge Warnings Check engine Overload Communication error Low battery Air cleaner clogging Indicators Max power Low speed/High speed Fuel warmer Auto idle Door and cab locks, one key Two outside rearview mirrors Fully adjustable suspension seat with seat belt Pilot-operated slidable joystick Four front working lights Electric horn Batteries (2 x 12V x 160 AH) Battery master switch Removable clean-out dust net for cooler Automatic swing brake Removable reservoir tank Fuel pre-filter Boom holding system Arm holding system Track shoes (600mm, 24”) Track rail guard Accumulator for lowering work equipment Electric transducer Lower frame under cover (Normal)
STANDARD EQUIPMENT Fuel filler pump (35 L/min) Beacon lamp Single-acting piping kit (breaker, etc.) Double-acting piping kit (clamshell, etc.) Quick coupler Travel alarm Booms 6.15 m, 20’ 2” 6.5 m, 21’ 4” 6.5 m, 21’ 4” Heavy Duty 8.6 m, 28’ 3” Arms 2.5 m, 8’ 2” 3.2 m, 10’ 6” 3.2 m, 10’ 6” Heavy Duty 3.9 m, 12’ 10” 4.3 m, 14’ 1” 5.1 m, 16’ 9” Climate control Air conditioner only Heater only Cabin FOPS/FOG (ISO/DIS 10262 Level II) FOPS (Falling Object Protective Structure) FOG (Falling Object Guard) Cabin guard - front Wire net Fine net Cabin lights Cabin front window rain guard Sun visor Track shoes Triple grousers shoe (700mm, 28”) Triple grousers shoe (750mm, 30”) Triple grousers shoe (800mm, 32”) Triple grousers shoe (900mm, 36”) Heavy duty track shoe (600mm, 24”) Heavy duty track shoe (700mm, 28”) Full track rail guard Lower frame under cover (Additional) Pre-heating system, coolant Tool kit Operator suit Rearview camera Seat Mechanical suspension seat with heater Hi-mate (Remote Management System) Fuel warmer Air compressor
optional EQUipMEnt
* Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards.* The photos may include attachments and optional equipment that are not available in your area.* Materials and specifications are subject to change without advance notice.* All imperial measurements rounded off to the nearest pound or inch.
We build a better future
With Tier 2 Engine installed
Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more precision, versatile machine preferences, and proven quality. Take pride in your work with Hyundai!
2/3
Pride at Work
*Photo may include optional equipment.
Sealed track chain (urethane seals) / Standard track rail guard / Comfortable bolt-on stepsLarge upper roller cut-outs for debris clean-out / Tapered side frames for debris clean-out / Grease-type track tensioner
Undercarriage
New patented hydraulic control for improved controllability / Improved control valve design for added efficiency and smoother operation / New auto boom and swing priority system for optimum speed / New auto power boost feature for additional power when needed / Improved arm-in and boom-down flow regeneration system for added speed and efficiency
Hydraulic System Improvements
Proven / reliable, fuel efficient Hyundai D6AC-C engineLow noise / Auto engine warm up feature / Anti-restart feature
Engine Technology
Industry-leading, powerful, reliable Kawasaki designed, variable volume in-line axial piston pumpsNew compact solenoid block equipped with 4 solenoid valves, 1 EPPR valve, 1 check valve accumulator and pilot filter - controls 2 speed travel, power boost, boom priority, safety lock
Pump Compartment
Improved VisibilityEnlarged cab with improved visibilityLarger right-side glass, now one piece, for better right visibilitySafety glass windows on all sides - less expensive than (polycarbonate) and won’t scratch or fadeCloseable sunshade for operator convenience / Reduced front window seam for improved operator view
Improved Cab ConstructionNew steel tube construction for added operator safety, protection and durabilityNew window open/close mechanism designed with cable and spring lift assist and single latch release
Improved Suspension Seat / Console AssemblyErgonomic joysticks with auxiliary control buttons for attachment use. Now with new sleek stylingNew joystick consoles - now adjustable in height by way of dial at bottomAdjustable arm rests - turn dial to raise or lower for optimum comfort
Advanced 7” Color ClusterNew Color LCD Display with easy to read digital gauges for hydraulic oil temperature, water temperature, and fuel. Simplified design makes adjustment and diagnostics easier. Also, new enhanced features such as rear-view camera are integrated into monitor.3 power modes : (P) Power, (S) Standard, (E) Economy, 2 work modes : Dig & Attachment, (U) User mode for operator preferenceEnhanced self-diagnostic features with GPS / satellite technologyOne pump flow or two pump flow for optional attachment is now selectable through the cluster / New anti-theft system with password capabilityBoom speed and arm regeneration are selectable through the monitor.Auto power boost is now available - selectable (on/off) through the monitor.Powerful air conditioning and heat with auto climate control, 20% more heat and air output than 7 series!RMS (Remote Management System) works through GPS/satellite technology to ultimately provide better customer service and support.
Enhanced Operator Cab
Machine Walk-Around
The advanced new cluster with 7 inch wide color LCD screen and toggle switch allows the operator to select his personal machine preferences. Power and work mode selection, self diagnostics, optional rear-view camera, maintenance check lists, start-up machine security, and video functions were integrated into the cluster to make the machine more versatile and the operator more productive.
Operator - Friendly Cluster
Work is stressful enough. Your work environment should be stress free. Hyundai's 9S Series provides improved cab amenities, additional space and a comfortable seat to minimize stress to the operator. A powerful climate control system provides the operator with optimum air temperature. An advanced audio system with USB player, AM/FM stereo is perfect for listening to music favorites.
Reduced Stress
In 9S Series cabin you can easily adjust the seat, console and armrest settings to best suit your personal operating preferences. Seat and console position can be set together and independent
from each other. Other preference settings that add to overall operator comfort include the fully automatic high capacity airconditioning system and the radio / USB player.
Operator Comfort
4/5
PreferenceOperating a 9S Series is unique to every operator. Operators can fully customize their workenvironment and operating preferences to fit their individual needs.
*Photo may include optional equipment.
Wide Cabin with Excellent Visibility
The newly designed cabin was conceived for more space, a wider field of view and operator comfort. Special attention was given to a clear, open and convenient interior with plenty of visibility on the machine surroundings and the job at hand. This well balanced combination of precision aspects put the operator in the perfect position to work safely and securely.
PrecisionInnovative hydraulic system technologies make the 9S series excavator fast, smooth and easy to control.
*Photo may include optional equipment.
The engine horsepower and hydraulic horsepower together in unison through the advanced CAPO(Computer Aided Power Optimization) system, flow for the job at hand. Operator can set their own preferences for boom or swing priority, power mode selection and optional work tools at the touch of a button.The CAPO system also provides complete self diagnostic features and digital gauges for important information like hydraulic oil temperature, water temperatures and fuel level. This system interfaces with multiple sensors placed throughout the hydraulic system as well as the hydraulic flow.
Computer Aided Power
Improved Hydraulic SystemTo achieve optimum precision, Hyundai redesigned the hydraulic system to provide the operator with super fine touch and improved controllability. Improved pump flow control reduces flow when controls are not being used to minimize fuel consumption.Improved spool valves in the control valve are engineered to provide more precise flow to each function with less effort.Improved hydraulic valves, precision-designed variable volume piston pumps, fine-touch pilot controls, and enhanced travel functions make any operator running a 9S
Series look like a smooth operator. Newly improved features include arm-in and boom-down flow regeneration, improved control valve technology and innovative auto boom and swing priority for optimal performance in any application.
6/7
P (Power Max) mode maximizes machine speed and power for mass production. S (Standard) mode provides a reduced, fixed rpm for optimum performance and improved fuel economy. For maximum fuel savings and improved control, E (Economy) mode provides precise flow based on load demand. Three unique power modes provide the operator with custom power, speed and fuel economy.
Power Mode
Some jobs require more precise machine settings. Using the versatile U (User) mode, the operator can customize engine speed, pump output, idle speed and other machine settings for the job at hand.
User Mode
The work mode allows the operator to select single flow attachments like a hydraulic breaker or bi-directional flow attachments like a crusher. Flow settings unique to each attachment can be programmed from within the cluster.
Work Mode
Auto Boom-swing PriorityThis smart function automatically and continuously looks the ideal hydraulic flow balance for the boom and swing motions of the machine. The advanced CAPO system monitors the hydraulic system and adjusts its settings to maximize performance and productivity.
*Photo may include optional equipment.
9S series is designed for maximum performance to keep the operator working productively.
Performance
8/9
*Photo may include optional equipment.
8/9
Structure StrengthThe 9S series cabin structure has been fitted with stronger but slimmer tubing for more safety and improved visibility. Low-stress, high strength steel is integrally welded to form a stronger, more durable upper and lower frame. Structural integrity was tested by way of FEM (Finite Elements Method) analysis and long-term durability tests.
A More Reliable Way To Reach Your Dream.When you have a tough job to do, you need power precision and flexibility of Hyundai D6AC-C engine. It is built to withstand the toughest work environment. Bearings have more surface area to handle higher loads with greater durability. Reduced friction in the power cylinder means longer life and increased power output. From the structurally reinforced block to the stiffened gear housing, the D6AC-C is built stronger to last longer.
The D6AC-C engine is capable of reaching Tier 2 emission standards without electronic engine controls. It uses durable mechanical IN-LINE fuel injection system. You get a proven power plant that meets ecological concerns, without paying a premium for technology you don’t need.
HYUNDAI D6AC-C ENGINEThe six cylinders, 4 cycle, turbo-charged, charger air cooled engineis built for power, reliability, economy and low emissions.
8/9
Durable track rail guards keep track links in place. Track adjustment is made easy with standard grease cylinder track adjusters and shock absorbing springs.
Track Rail Guard & Adjusters
Profitability9S series is designed to maximize profitability through improved efficiencies,enhanced service features and longer life components.
*Photo may include optional equipment.
10/1110/11
Easy AccessGround-line access to filters, lube fittings, fuses, machine computer components and wide open compartments makes service more convenient on the 9S series.
Hi-mate (Remote Management System)Hi-mate, Hyundai's proprietary remote management system, provides operators and dealer service personnel access to vital service and diagnostic information on the machine from any computer with internet access. Users can pinpoint machine location using digital mapping and set machine work boundaries, reducing the need for multiple service calls. Hi-mate saves time and money for the owner and dealer by promoting preventative maintenance and reducing machine downtime.
Fuel Efficiency9S Series excavators are engineered to be extremely fuel efficient.New innovations like two-stage auto decel system and the new economy mode help to conserve fuel and reduce the impact on the environment.
Long-Life Components9S series excavators were designed with bushings designed for long-life lube intervals (250 hrs) & polymer shims (wear resistant, noise reducing), long-life hydraulic filters (1,000hrs), long-life hydraulic oil (5,000hrs), more efficient cooling systems and integrated preheating systems which extend service intervals, minimize operating costs and reduce machine down time.
Specifications
Main puMpType
Rated flow
Sub-pump for pilot circuit
Cross-sensing and fuel saving pump system.
Variable displacement tandem axis piston pumps
2 X 280 L /min (74.0 US gpm / 61.6 UK gpm)
Gear pump
Hydraulic system
Hydraulic motors
Travel
Swing
Two speed axial pistons motor
with brake valve and parking brake
Axial piston motor with automatic brake
Hydraulic cylinders
No. of cylinder
bore X stroke
Boom: 2-160 X 1,500 mm (6.3”X 59.1”)
Arm: 1-170 X 1,760 mm (6.7” X 69.3”)
Bucket: 1-150 X 1,295 mm (5.9” X 51.0”)
Relief valve settingImplement circuits
Travel
Power boost (boom, arm, bucket)
Swing circuit
Pilot circuit
Service valve
330 kgf/cm2 (4,690 psi)
360 kgf/cm2 (5,120 psi)
360 kgf/cm2 (5,120 psi)
290 kgf/cm2 (4,125 psi)
40 kgf/cm2 (569 psi)
Installed
Drives & BrakesDrive method
Drive motor
Reduction system
Max. drawbar pull
Max. travel speed(high) / (low)
Gradeability
Parking brake
Fully hydrostatic type
Axial piston motor, in-shoe design
Planetary reduction gear
32,000 kgf (70,550 lbf)
5.0 km/hr (3.1 mph) / 3.1 km/hr (1.9 mph)
350 (70 %)
Multi wet disc
12/13
Capacity
m3 (yd3)
SAE
heaped
CECE
heaped
Without
side cutters
With
side cutters
Width
mm (in) Weight
kg (lb)
Recommendation mm (ft.in)
6,500 (21’ 4”) Boom 6,150 (20’ 2”) Boom 8,600 (28’ 3”) Boom
1.46 (1.91)
1.62 (2.12)
1.86 (2.43)
2.10 (2.75)
2.32 (3.03)
1.62 (2.12)
1.44 (1.88)
1.62 (2.12)
1.86 (2.43)
◈
◉◉◉
1.27 (1.66)
1.40 (1.83)
1.60 (2.09)
1.80 (2.35)
2.00 (2.62)
1.40 (1.83)
1.27 (1.66)
1.40 (1.83)
1.60 (2.09)
1,380 (54.3)
1,440 (56.7)
1,620 (63.8)
1,810 (71.3)
1,990 (78.3)
1,540 (60.6)
1,280 (50.4)
1,545 (60.8)
1,725 (67.9)
1,510 (59.4)
1,570 (61.8)
1,750 (68.9)
1,940 (76.4)
2,120 (83.5)
-
-
-
-
1,170 (2,580)
1,280 (2,820)
1,390 (3,060)
1,520 (3,350)
1,760 (3,880)
1,570 (3,460)
1,565 (3,450)
1,610 (3,550)
1,710 (3,770)
SAEheaped
m3 (yd3)
2,500 (8’ 2”) Arm 3,200 (10’ 6”) Arm 3,900 (12’ 10”) Arm 4,300 (14’ 1”) Arm 2,500 (8’ 2”) Arm 5,100 (16’ 9”) Arm
●
●
●
■
▲
●
●
●
■
●
●
●
■
▲
●
●
●
■
●
■
■
▲
▲
■
■
■
-
●
■
▲
-
-
▲
▲
▲
-
●
●
●
●
■
●
●
●
■
▲
-
-
-
-
-
-
-
-
◈ Heavy duty bucket
◉ Rock-Heavy duty bucket● : Applicable for materials with density of 2,000 kg /m3 (3,370 lb/ yd3) or less
■ : Applicable for materials with density of 1,600 kg /m3 (2,700 lb/ yd3) or less
▲ : Applicable for materials with density of 1,100 kg /m3 (1,850 lb/ yd3) or less
All buckets are welded with high-strength steel.
BUCkETS
1.46 (1.91) ◉◉◉
1.44 (1.88)1.62 (2.12)1.86 (2.43)
1.86 (2.43)1.62 (2.12) 2.10 (2.75) 2.32 (3.03) ◈ 1.62 (2.12)
ControlPilot pressure operated joysticks and pedals with detachable lever provide almost
effortless and fatigueless operation.
Pilot control
Traveling and steering
Engine throttle
Two joysticks with one safety lever
(LH): Swing and arm, (RH): Boom and bucket (ISO)
Two levers with pedals
Electric, Dial type
Swing SyStemSwing motor
Swing reduction
Swing bearing lubrication
Swing brake
Swing speed
Fixed displacement axial pistons motor
Planetary gear reduction
Grease-bathed
Multi wet disc
9.7 rpm
Coolant & lubriCant CapaCityRefilling
Fuel tank
Engine coolant
Engine oil
Swing device-gear oil
Final drive(each)-gear oil
Hydraulic system(including tank)
Hydraulic tank
liter
550
52.0
27.3
8.0
4.3
410.0
210.0
US gal
145.3
13.7
7.2
2.1
1.1
108.3
55.5
UK gal
121.0
11.4
6.0
1.8
0.9
90.2
46.2
UndercarriageThe X-leg type center frame is integrally welded with reinforced box-section track
frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock
absorbing springs and sprockets, and a track chain with double or triple grouser shoes.
Center frame
Track frame
No. of shoes on each side
No. of carrier roller on each side
No. of track roller on each side
No. of rail guard on each side
X - leg type
Pentagonal box type
51 EA
2 EA
9 EA
2 EA
Operating weight (apprOximate)Operating weight, including 6,500mm (21’ 4”) boom, 3,200mm (10’ 6”) arm, SAE
heaped 1.62m3 (2.12 yd3) bucket, lubricant, coolant, full fuel tank, full hydraulic tank,
and all standard equipments.
MAjoR CoMPonEnt WEigHtUpperstructure
Boom (with arm cylinder)
Arm (with bucket cylinder)
8,750 kg (19,290 lb)
3,780 kg (8,330 lb)
2,010 kg (4,430 lb)
Operating weightShoes
Type
Triple
grouser
Operating weight
kg(lb)
38,400 (84,660)
38,850 (85,650)
39,070 (86,130)
39,290 (86,620)
39,750 (87,630)
Width mm (in)
600 (24”)
700 (28”)
750 (30”)
800 (32”)
900 (36”)
Ground pressure
kgf/cm2(psi)
0.69 (9.81)
0.60 (8.53)
0.56 (7.96)
0.53 (7.54 )
0.47 (6.68)
BoomLength
Weight
Length
Weight
mm (ft.in)
kg (lb)
mm (ft.in)
kg (lb)
2500 (8’ 2”)
1,990 (4,390)
201.0 [219.3]
20,500 [22,360]
45,190[49,300]
228.5 [249.3]
23,300 [25,420]
51,370 [56,040]
184.4 [201.1]
18,800 [20,510]
41,450 [45,220]
192.2 [209.7]
19,600 [21,380]
43,210 [47,140]
201.0 [219.3]
20,500 [22,360]
45,190 [49,300]
228.5 [249.3]
23,300 [25,420]
51,370 [56,040]
152.0 [165.8]
15,500 [16,910]
34,170 [37,280]
156.9 [171.2]
16,000 [17,450]
35,270 [38,480]
201.0 [219.3]
20,500 [22,360]
45,190 [49,300]
228.5 [249.3]
23,300 [25,420]
51,370 [56,040]
135.3 [147.6]
13,800 [15,050]
30,420 [33,190]
139.3 [151.9]
14,200 [15,490]
31,310 [34,160]
201.0 [219.3]
20,500 [22,360]
45,190 [49,300]
228.5 [249.3]
23,300 [25,420]
51,370 [56,040]
124.5 [135.9]
12,700 [13,850]
28,000 [30,550]
128.5 [140.1]
13,100 [14,290]
28,880 [31,510]
[ ]:
Power
Boost
3,200 (10’ 6”)
2,010 (4,430)
3,900 (12’ 10”)
2,220 (4,890)
6,500 (21’ 4”)3,780 (8,330)
8,600 (28’ 3”)4,560 (10,050)
4,300 (14’ 1”)
2,340 (5,160)
201.0 [219.3]
20,500 [22,360]
45,190 [49,300]
228.5 [249.3]
23,300 [25,420]
51,370 [56,040]
109.8 [119.8]
11,200 [12,220]
24,690 [26,930]
112.8 [123.0]
11,500 [12,550]
25,350 [27,650]
5,100 (16’ 9”)
2,560 (5,640)
Remarks
Arm
Bucket
digging
force
SAE
kN
kgf
lbf
ISO
kN
kgf
lbf
SAE
kN
kgf
lbf
ISO
kN
kgf
lbf
Arm
crowd
force
Note: Boom weight includes arm cylinder, piping, and pin
Arm weight includes bucket cylinder, linkage, and pin
Booms and arms are welded, a low-stress, full-box section design. 6.15m, 6.5m, 8.6m booms and 2.5m, 3.2m, 3.9m, 4.3m, 5.1m arms are available.
attachment
Digging force
Model
Type
Rated
flywheel
horse power
Max. torque
Bore X stroke
Piston displacement
Batteries
Starting motor
Alternator
120.0kgf.m (868lbf.ft)/1,400rpm
130mm X 140mm (9.56” X 10.3”)
11,149cc (680 in3)
2 X 12V X 160AH
24V, 5.5 kW
24V, 70 Amp
DIN
SAEJ1995 (gross)
J1349 (net)
6271/1 (gross)
6271/1 (net)
Water cooled, 4 cycle Diesel,
6-cylinders in line, direct injection,
turbocharged, charger air cooled, low emission
276 HP (206 kW) at 1,900 rpm
261 HP (195 kW) at 1,900 rpm
280 PS (206 kW) at 1,900 rpm
265 PS (195 kW) at 1,900 rpm
HYUNDAI D6AC-C
EnginE
Dimensions & Working Range
Boom length
Arm length
Max. digging
reach
Max. digging
reach on ground
Max. digging
depth
Max. digging
depth (8' level)
Max. vertical wall
digging depth
Max. digging
height
Max. dumping
height
Min. swing radius
A
A’
B
B’
C
D
E
F
2,500(8’ 2”)
10,720(35’ 2”)
10,490(34’ 5”)
6,820(22’ 5”)
6,640(21’ 9”)
5,930(19’ 5”)
10,590(34’ 9”)
7,370(24’ 2”)
4,530(14’ 10”)
3,200(10’ 6”)
11,250(36’ 11”)
11,040(36’ 3”)
7,520(24’ 8”)
7,360(24’ 2”)
6,330(20’ 9”)
10,570(34’ 8”)
7,410(24’ 4”)
4,450(14’ 7”)
6,500 (21’ 4”)
3,900(12’ 10”)
11,870(38’ 11”)
11,670(38’ 3”)
8,220(26’ 12”)
8,080(26’ 6”)
7,040(23’ 1”)
10,800(35’ 5”)
7,640(25’ 1”)
4,440(14’ 7”)
4,300(14’ 1”)
12,380(39’ 12”)
12,180(40’ 0”)
8,620(28’ 3”)
8,490(27’ 10”)
7,540(24’ 9”)
11,360(37’ 3”)
8,160(26’ 4”)
4,460(14’ 8”)
2,500(8’ 2”)
10,330(33’ 11”)
10,100(33’ 2”)
6,450(21’ 2”)
6,270(20’ 7”)
5,490(18’ 0”)
10,320(33’ 10”)
7,120(23’ 4”)
4,220(13’ 10”)
5,100(16’ 9”)
15,280(50’ 2”)
15,120(49’ 7”)
11,230(36’ 10”)
11,120(36’ 6”)
10,060(33’ 0”)
13,350(43’ 10”)
10,150(33’ 4”)
5,900(19’ 4”)
Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
A
B
C
D
D’
E
F
G
H
4,340 (14’ 3”)
5,280 (17’ 4”)
1,290 (4’ 3”)
3,415 (11’ 2”)
3,350 (10’ 12”)
2,980 (9’ 9”)
3,175 (10’ 5”)
550 (1’ 10”)
2,740 (8’ 12”)
mm (ft.in) mm (ft.in)
mm (ft.in)
Boom length
Arm length
Overall length
Overall height of boom
I
J
2,500(8’ 2”)
11,240(36’ 11”)
3,710(12’ 2”)
600(24”)
700(28”)
750(30”)
800(32”)
900(36”)
3,340(10’ 11”)
3,440(11’ 3”)
3,490(11’ 5”)
3,540(11’ 7”)
3,640(11’ 11”)
3,200(10’ 6”)
11,120(36’ 6”)
3,450(11’ 4”)
3,900(12’ 10”)
11,160(36’ 7”)
3,880(12’ 9”)
4,300(14’ 1”)
11,110(36’ 5”)
4,300(14’ 1”)
2,500(8’ 2”)
10,880(35’ 8”)
3,760(12’ 4”)
5,100(16’ 9”)
6,150 (20’ 2”)
6,150 (20’ 2”) 8,600 (28’ 3”)
8,600 (28’ 3”)
13,070(42’ 11”)
4,910(16’ 1”)
6,500 (21’ 4”)
Track shoe width
Overall width
R380LC-9SH DimenSionS
R380LC-9SH WoRking Range
K
L
Lifting CapacityR380LC-9SH Rating over-front Rating over-side or 360 degree
Boom : 6.15 m (20’ 2”) / Arm : 2.5 m (8’ 2”) / Bucket : 1.62 m3 (2.12 yd3) SAE heaped / Shoe : 600mm(24”) triple grouser
Load pointheightm (ft)
Load radius3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
m (ft)
At max. reach
9.0 m(30 ft)7.5 m(25 ft)6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)
*18270*40280
*13400*29540*21020*46340 *22960*50620*17870*39400
*18270*40280
*13400*29540*21020*46340 *22960*50620*17870*39400
kglbkglbkglbkglbkglbkglbkglbkglbkglbkglb
Boom : 6.5 m (21’ 4”) / Arm : 3.2 m (10’ 6”) / Bucket : 1.62 m3 (2.12 yd3) SAE heaped / Shoe : 600mm(24”) triple grouser
Load pointheightm (ft)
Load radius3.0 m (10 ft)1.5 m (5 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) 9.0 m (30 ft) Capacity Reach
m (ft)
At max. reach
9.0 m(30 ft)7.5 m(25 ft)6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)-6.0 m(-20 ft)
*13720*30250*17880*39420*22600*49820
*13720*30250*17880*39420*22600*49820
*13090*28860*17520*38620*22800*50270*21880*48240
*13090*28860*17520*38620*22800*50270*21880*48240
*13520*29810*16390*36130*17880*39420*18150*40010*17430*38430*15520*34220*11410*25150
*13520*2981012870283701223026960120202650012080266301239027320
*11410*25150
*8260*18210*9960
*21960*11570*25510*12690*27980*13170*29030*12880*28400*11510*25380
*8260*18210
8910196408270
182307820
172407600
167607580
167107790
17170
*4560*10050*6620
*14590*7320
*16140*8240
*18170*9170
*20220*9880
*217809750
215009750
21500
*4560*10050*6620
*145906530
144006150
135605790
127605520
121705370
118405370
11840
*4450*9810*6360
*14020*7510
*16560*7070
*15590
*4450*9810 443097704230933040909020
*5950*13120*6020
*13270*6110
*13470*6190
*136505940
131005890
129906130
135106730
14840*7730
*17040*7690
*16950
*5950*13120
482010630401088403550783033107300325071703380745037408250449099006200
13670
7.97(26.1)9.12
(29.9)9.87
(32.4)10.32(33.9)10.50(34.4)10.45(34.3)10.14(33.3)9.57
(31.4)8.65
(28.4)7.25
(23.8)
kglbkglbkglbkglbkglbkglbkglbkglbkglbkglbkglb
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.3. The load point is a hook located on the back of the bucket.4. (*) indicates the load limited by hydraulic capacity.
*12170*26830*15380*33910*17740*39110*18580*40960*18170*40060*16580*36550*13110*28900
*12170*26830141903128013080288401256027690124202738012540276501297028590
*8590*18940*9790
*21580*11300*24910*12640*27870*13410*29560*13400*29540*12330*27180
*8590*18940
9680213409030
199108450
186308060
177707880
173707930
17480
*6510*14350*8620
*19000*9350
*20610*10060*2218010120223101001022070
*6510*14350
6560144606250
137805940
131005710
125905610
12370
*7580*16710*7420
*16360*7460
*164507480
164907050
155407010
154507360
162308290
18280*8180
*18030
*7580*16710
6190136504980
10980435095904040891039808770417091904710
103805950
13120
6.65 (21.8)8.02
(26.3)8.88
(29.1)9.38
(30.8)9.58
(31.4)9.52
(31.2)9.19
(30.2)8.53
(28.0)7.47
(24.5)
*17830*39310*22850*50380*18790*41420
*17830*39310*22850*50380*18790*41420
Boom : 6.5 m (21’ 4”) / Arm : 2.5 m (8’ 2”) / Bucket : 1.62 m3 (2.12 yd3) SAE heaped / Shoe : 600mm(24”) triple grouser
Load pointheightm (ft)
Load radius3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach
m (ft)
At max. reach
9.0 m(30 ft)7.5 m(25 ft)6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)
kglbkglbkglbkglbkglbkglbkglbkglbkglbkglb
*11870*26170*15200*33510*17480*38540*18200*40120*17860*39370*16580*36550*13880*30600
*11870*26170134202959012430274001208026630120602659012250270101272028040
*7970*17570*9290
*20480*10870*23960*12250*27010*13060*28790*13180*29060*12430*27400
*7970*17570*9290
*204808630
190308060
177707730
170407610
167807700
16980
*7480*16490*8060
*17770*8870
*19550*9650
*212709870
217609790
21580
6600145506340
139806000
132305690
125405480
120805410
11930
*6820*15040*6770
*14930*6850
*151006800
149906450
142206420
141506740
148607540
16620*7850
*17310*7110
*15670
*6820*15040
5390118804400970038708530361079603570787037508270423093305260
11600*7110
*15670
7.22(23.7)8.49
(27.9)9.29
(30.5)9.77
(32.1)9.97
(32.7)9.91
(32.5)9.59
(31.5)8.97
(29.4)7.97
(26.1)6.39
(21.0)
17
Lifting CapacityR380LC-9SH Rating over-front Rating over-side or 360 degree
Boom : 8.6 m (28’ 3”) / Arm : 5.1 m (16’ 9”) / Bucket : 1.46 m3 (1.91 yd3) SAE heaped / Shoe : 600mm(24”) triple grouser
Load pointheightm (ft)
Load radius3.0 m (10 ft)1.5 m (5 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) 9.0 m (30 ft) 10.5 m (35 ft) 12.0 m (40 ft) 13.5 m (45 ft) Capacity Reach
m (ft)
At max. reach
9.0 m(30 ft)7.5 m(25 ft)6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)-6.0 m(-20 ft)-7.5 m(-25 ft)-9.0 m(-30 ft)
kglbkglbkglbkglbkglbkglbkglbkglbkglbkglbkglbkglbkglb
*8910*19640*11090*24450*13540*29850*16440*36240
*8910*19640*11090*24450*13540*29850*16440*36240
*7990*17610*10270*22640*12810*28240*15800*34830*18490*40760*14620*32230
*7990*17610*10270*22640*12810*28240*15800*34830*18490*40760*14620*32230
*10920*24070*10890*24010*10400*22930*11720*25840*13880*30600*15320*33770*14460*31880*12970*28590*10500*23150
*10920*24070*10890*24010*10400*2293011200246901116024600113002491011590255501205026570
*10500*23150
*7400*16310*8990
*19820*10190*22470*10930*24100*11250*24800*11200*24690*10750*23700*9770
*21540*7900
*17420
*7400*16310
8120179007440
164007060
155606900
152106910
152307050
155407350
162007870
17350
*5710*12590*6710
*14790*7560
*16670*8180
*18030*8540
*18830*8610
*18980*8340
*18390*7580
*16710*5800
*12790
*5710*12590
5760127005280
116404970
109604800
105804760
104904850
106905080
112005550
12240
*4100*9040*4750
*10470*5420
*11950*6010
*13250*6480
*14290*6780
*14950*6850
*15100*6630
*14620*5850
*12900
*4100*90404620
1019042309330390086003670809035307780349076903570787037908360
*3010*6640*3110*6860*3360*7410*3730*8220*4160*9170*4610
*10160*5030
*11090*5370
*118405420
119505400
11900*5260
*11600
*3010*6640*3110*6860*3360*74103670809034107520315069402930646027706110267058902660586027706110
*2630*5800*3300*7280*3520*7760*3790*8360*4090*9020*4370*96304390968043409570
*2630*580028206220268059102520556023505180221048702110465020604540
*1720*3790*1900*4190
*1720*379017303810
*3030*6680*3100*6830*3180*7010*3290*72503310730032707210332073203470765037608290423093304390968044509810
251055302100463018204010164036201530337014803260150033101590351017703900208045902610575035707870
12.91(42.4)13.61(44.7)14.10(46.3)14.40(47.2)14.53(47.7)14.49(47.5)14.28(46.9)13.90(45.6)13.31(43.7)12.50(41.0)11.41(37.4)9.94
(32.6)
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.3. The load point is a hook located on the back of the bucket.4. (*) indicates the load limited by hydraulic capacity.
14/15/16
Lifting CapacityR380LC-9SH Rating over-front Rating over-side or 360 degree
Boom : 6.5 m (21’ 4”) / Arm : 3.9 m (12’ 10”) / Bucket : 1.62 m3 (2.12 yd3) SAE heaped / Shoe : 600mm(24”) triple grouser
Load pointheightm (ft)
Load radius3.0 m (10 ft)1.5 m (5 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) 9.0 m (30 ft) Capacity Reach
m (ft)
At max. reach
9.0 m(30 ft)7.5 m(25 ft)6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)-6.0 m(-20 ft)
*12630*27840*16240*35800*20300*44750
*12630*27840*16240*35800*20300*44750
*19700*43430*12690*27980*13710*30230*16860*37170*21070*46450*23540*51900*18730*41290
*19700*43430*12690*27980*13710*30230*16860*37170*21070*46450*23540*51900*18730*41290
*11910*26260*15110*33310*17120*37740*17890*39440*17610*38820*16240*35800*13200*29100
*11910*26260130502877012180268501181026040117602593011970263901248027510
*9000*19840*10740*23680*12090*26650*12830*28290*12860*28350*11980*26410
*9000*19840
8290182807750
170907440
164007340
161807460
16450
*5820*12830*6570
*14480*7540
*16620*8560
*18870*9410
*207509590
211409520
20990*8980
*19800
*5820*12830*6570
*144806160
135805750
126805420
119505220
115105150
113505280
11640
*3620*7980*5410
*11930*6730
*14840*7320
*161407260
160107140
15740
*3620*79804620
1019043909680416091703970875038608510
*5220*11510*5320
*11730*5490
*121005590
123205320
117305270
116205440
119905900
130106820
15040*7360
*16230*0*0
*5220*11510
41609170350077203110686029006390283062402920644031907030374082504900
1080000
8.81(28.9)9.85
(32.3)10.54(34.6)10.95(35.9)11.13(36.5)11.07(36.3)10.79(35.4)10.26(33.7)9.42
(30.9)8.17
(26.8)0.00(0.0)
kglbkglbkglbkglbkglbkglbkglbkglbkglbkglbkglb
Boom : 6.5 m (21’ 4”) / Arm : 4.3 m (14’ 1”) / Bucket : 1.62 m3 (2.12 yd3) SAE heaped / Shoe : 600mm(24”) triple grouser
Load pointheightm (ft)
Load radius3.0 m (10 ft)1.5 m (5 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) 9.0 m (30 ft) 10.5 m (35 ft) Capacity Reach
m (ft)
At max. reach
9.0 m(30 ft)7.5 m(25 ft)6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)-6.0 m(-20 ft)
*11110*24490*14410*31770*18210*40150*22860*50400
*11110*24490*14410*31770*18210*40150*22860*50400
*16870*37190*13700*30200*13070*28810*15450*34060*19090*42090*24070*53070*20530*45260
*16870*37190*13700*30200*13070*28810*15450*34060*19090*42090*24070*53070*20530*45260
*10740*23680*14150*31200*16510*36400*17630*38870*17690*39000*16690*36800*14250*31420
*10740*23680133202937012280270701177025950116302564011760259301218026850
*8310*18320*10140*22350*11640*25660*12570*27710*12820*28260*12250*27010*10350*22820
*8310*18320
8400185207790
171707410
163407260
160107310
161207610
16780
*6030*13290*7050
*15540*8130
*17920*9070
*200009560
210809440
20810*9310
*20530
*6030*13290
6230137305790
127605420
119505170
114005070
111805120
11290
*2710*5970*4420*9740*5580
*12300*6340
*13980*6980
*153907240
159607080
15610*6600
*14550
*2710*5970*4420*97404660
102704420974041709190395087103800838037608290
*2620*5780*2950*6500
*2620*5780*2950*6500
*4970*10960*4770
*10520*4670
*10300*4690
*10340*4830
*106504820
106304970
109605350
117906100
13450*6710
*14790*6520
*14370
4590101203660807031006830277061102590571025405600261057502830624032907250419092406280
13850
9.45(31.0)10.42(34.2)11.07(36.3)11.46(37.6)11.63(38.2)11.58(38.0)11.31(37.1)10.81(35.5)10.02(32.9)8.87
(29.1)7.15
(23.5)
kglbkglbkglbkglbkglbkglbkglbkglbkglbkglbkglb
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.3. The load point is a hook located on the back of the bucket.4. (*) indicates the load limited by hydraulic capacity.