Impaste Technology Pvt. Ltd.

Impaste is a upcoming organization providing turnkey based painting plant. We design and build turnkey Powder and Liquid paint plants with state of art in-house manufacturing facilities at Bangalore. We have established ourselves and gained expertise in the field of surface finishing technology to design and build different types of Pretreatment, Powder Coating and Liquid painting plants.

Excellence

Integrity

Learning & Sharing

Contribution to Industry & Society

Plant & Technology of International

Standards

Quality

Technology

Customer Satisfaction

User Friendly

Advance & Innovations

VisionVision MissionMission

Product Range

Paint Shop On Turnkey Basis

Conveyorised Powder Coating Plant

Conveyorised liquid Painting Plant

Pre-Treatment Plant

Powder Coating Booth

Liquid Painting Booth

Batch Type Oven (HSD/GAS/Electrical)

Powder Coating Gun

Hot Water Boiler

Pre-Treatment Process

Spray Pre-Treatment Process

Spray Pre-Treatment Process

We offer Spray Pretreatment plants made of complete Stainless steel/MS spray tunnels along with direct or indirect heating system with hot water generator, Pumps (Vertical/ Horizontal), Easy clip on nozzles.

Fume Scrubber Easy Maintenance Material Handling System:

Conveyorized

Pre-Treatment Process

Dip Pre-Treatment ProcessDip Pre-Treatment Process Dip Pretreatment Plants are

commonly used for long & heavy components to clean prior to powder / paint application.

Dip Pretreatment is a pre-treatment wherein the chemicals are stored in the steel (MS/SS) fabricated tanks. The components are placed in the baskets or cages and they are dipped in each process tank for pre-fixed period of time.

Material Handling system: Hoist/ PLC Operated Transporter/Monorail

Powder Coating Process

Batch Type Cyclone BoothBatch Type Cyclone Booth Batch Type Filter Cartage Booth

Batch Type Filter Cartage Booth

Powder Coating Process

Conveyorised PlantConveyorised Plant

We provide Total Turnkey solution to our customer for finishing their products.

powder coating does not have a liquid carrier, it can produce thicker coatings than conventional liquid coatings.

Conveyorized plant reduce man power , gives uniform quality & production .

Liquid Painting Process

Batch Type BoothBatch Type Booth

In order to assist in the removal of the over sprayed paint from the air and to provide efficient operation of the down-draft, water-washed paint spray booths utilize paint.

Dry / Wet type Booth Down / Side Draft Type

Booth

Liquid Painting Process

Conveyorised PlantConveyorised Plant

We provide Total Turnkey solution to our customer for finishing their products.

Liquid painting is use to give high quality finishes.

Conveyorized plant reduce material handling, man power , gives improve quality & production .

Painting line uses 2 or 3 coats( primer, top/base & clear/Lacquer) of paints one over the other.

Batch Type Oven

HSD/Gas Fired OvenHSD/Gas Fired Oven

These ovens utilise Oil/ Gas as a fuel. The fuel is fired with the help of imported burner inside the heat exchanger made of stainless steel. The blowers mounted in the heater box circulate the oven air over the heat exchanger thus oven air is heated indirectly. Flue gases after burning the fuel are exhausted to the atmosphere through chimney.

Gas fired oven can be Direct/ Indirect Fired.

Design to consume a low fuel with uniform temperature thought the oven.

Batch Type Oven

Electrical Heated OvenElectrical Heated Oven Electric ovens occupy less volume,

low cost and require less maintenance but have high running cost. These ovens have 150 mm glass wool insulation and give minimum heat loss. Generally two doors are provided on two sides. Suitable blowers circulate the hot air inside the oven giving uniform temperature distribution throughout the oven cross section. Blowers are indirectly driven. The control panel has a digital temperature indicator - controller, hooter with timer for indication of cycle completion.

Oven has inbuilt tracks for provision of ground trolley.

Powder Coating Gun

The most common way of applying the powder coating to metal objects is to spray the powder using an electrostatic gun. The gun imparts a positive electric charge to the powder, which is then sprayed towards the grounded object by mechanical or compressed air spraying and then accelerated toward the work piece by the powerful electrostatic charge. There are a wide variety of spray nozzles available for use in electrostatic coating.

Easy to handle, Safe & Trouble free.

Hot Water Boiler

Water heating is a thermodynamic process that uses an energy source to heat water above its initial temperature. Typical domestic uses of hot water include cooking, cleaning, bathing, and space heating. In industry, hot water and water heated to steam have many uses.

The hot water boilers are designed to operate on various types of fuels such as heavy oil, light oil, gas, duel fuel, coal, husk and other agro waste fuels.

hot water boilers in the range of 25,000 to 90,00,000 kcal per hour

Impaste Technology Pvt. Ltd.