Post on 16-Mar-2018
transcript
We help build all that you see
ED
ITIO
N 5
.0
FROM THE DESK OF THE MD
It is with pride and pleasure and deep gratitude to my committed team that I address you.
From being a fully integrated Admixture Company, CAC have grown to achieve a presence well beyond
admixtures in the world of water-proo�ng and specialized construction products, and technologies
backed by the best of the world.
The past is there in our excellent track record of performance and commitment. Our customers are our
testimonials.
We wish to be part of the India growth story, catering to each and every infrastructure project on going and
upcoming , that would give a true scene of partnering in nation building with home grown technology
and products.
Our presence in UAE and Oman is a stepping stone to Global expansion, with our unique boutique model
of customer centric formulation centers that formulate products with key raw materials supplied by our
Indian factories. This way we ensure a strong brand presence while we bene�t India with forex revenue and
supporting the ' Make in India ' vision.
All our manufacturing units use agrowaste green fuel, our plants are 100% fossil fuel free. We are also
working on more solar dependence in the years to come.
Our �agship products, concrete admixtures , promote the use supplementary cement materials SCM in
Concrete there by replacing cement by over 60% which is directly responsible to reduce global warming.
As a company with a serious commitment to the cause of responsible construction of infrastructure, we at
CAC shall continue with un�agging zeal to produce the best products of global standards, be an
environment friendly company, be a corporate with a deep sense of social responsibility and leave an
indelible yet quiet footprint of unfailing product quality and all time dependability.
Satish JaysankarManaging Director
2
MANAGING COMMITTEE
S. V. JaysankarChairman
Satish JaysankarManaging Director
SrinivasanCFO
Sandeep KhedekarCEO
Dinesh MirchandaniGroup General Manager
D. K. NaikResearch & Development
Rajendra BirajdarProjects & Contract Manufacturing
3
ABOUT CACCAC was floated in 2006 in Mumbai / India.
Expanded to Chennai / India in 2008 .
Expanded to Delhi NCR in 2012 .
Expanded to UAE in 2014.
Launched UGC range of products in 2015
Expanded to Oman in 2016.
Now CAC Key Admixture supplier to most RMC plants
and Projects sites in India and Middle East.
Selling over 50000 MT annually and counting.
R&D is the key to our growth.
Commitment to our customer, our team and our environment
is our goal.
CAC Headquarters, Mumbai, India
4
CAC QUALITY POLICY
ADMIXTURES
PCE
SNFANCHOR COATING FOR PACKAGING
TRADING
SPECIALITY CHEMICALS
CUSTOM SPRAY DRYING
TUNNEL AND MINING SOLUTIONS
WATER PROOFING
KEY RAWMATERIALS PAN INDIA
#GCC UAE
OMAN
QATAR
#ASIA PAC
#USA
OWN JV
SINGAPORE
MALAYSIA
GROUPSINCE 1942
CAC shall provide total value to its customers by consistent supply of quality products and
reliable service support.
CAC shall continuously strive to achieve quality and performance leadership in its products.
CAC shall ensure continuous development of new products and techniques to impart REAL
VALUE to the construction industry.
CAC shall ensure safety at its work place and surroundings.
CAC shall achieve the above GOALS by a trained and well co-ordinated team.
ADMIXTURES &SPECIALITYPRODUCTS
FORCONSTRUCTION
WATERPROOFING& CORROSIONPROTECTIONSPRAYABLE
MEMBRANES
JOINT VENTURE WITH ASSOCIATION WITH
COMPLETESOLUTION FOR
MINING ANDTUNNELLINGMACHINERIES
5
CAC PRODUCTS RO
AD
S &
R
AIL
WA
YS
CO
NC
RE
TE
TU
NN
ELI
NG
BU
ILD
ING
ROADS & RAILWAYS CONCRETE TUNNELINGBUILDING
CAC - Retardplast
CAC - Setplast
CAC - Superflow Series
CAC - Superflow (P)
CAC - Hyperfluid Plus H Series
CAC - Hyperfluid Plus G Series
CAC - Hyperfluid Plus R Series
CAC - Hyperfluid HES
CAC - AEA
CAC - VMA
CAC - 92 MS
CAC - LIW
CAC - HPB WP 73
CAC - Corrobit
CAC - MRA OB/WB
CAC - Easy Prime
CAC - Expacreet CG Series
CAC - Bonding Agent
CAC - Rockfix RB/CB
CAC - Shotcrete AFA
CAC - Curewell Series
CAC - Mahashakti CDH
Retarding plasticizer for concrete
Accelerators for Concrete
SNF based Super Plasticizer
SNF Based Powder Admixture
LOW PCE based Super Plasticizer
MID PCE based Super Plasticizer
HIGH PCE Based Super Hyperplasticizer for HPC & SCC
PCE based Super Plasticizer for achieving High Early Strength
Air entraining Admixture
Viscosity Modifying Admixture for SCC
Densified Microsillica
Liquid Integral waterproofing Admixture
Hydrophobic Pore - blocking Ingredient for watertight concrete
Corrosion inhibing Admixture for RCC
Mineral Oil based / Water based Mould Release Aid
Pump and Pipeline Primer (Cement slurry replacement)
Free flow, non-shrink cementitious grout
Acrylic based Bonding Agent
Resin and Cement Capsules for anchoring rock bolt
Alkali Free Accelerators for Shotcrete
Concrete Curing Aids
Steel Fibers for Shotcrete
UGC PRODUCTS
CAC - Flexeal PS Pouring Grade Two Component Poly Sulphide Sealant
6
RO
AD
S &
R
AIL
WA
YS
CO
NC
RE
TE
TU
NN
ELI
NG
BU
ILD
ING
ROADS & RAILWAYS CONCRETE TUNNELINGBUILDINGUGC PRODUCTS
EXTERNAL COATING FOR CONCRETE CURING - ASTM-C-109
• Saves Time • Saves Labour • Saves Water • Saves Cost • Increases Productivity
• Prevent Corrosion • Saves Cost • Enhances Life
1
BIPOLAR MIGRATORY CORROSION INHIBITOR - ASTM-G-109 2
• Bonding Precast Segments
SEGMENT BONDING EPOXY ADHESIVE3
• Integral Water Proofing
CRYSTALLINE CAPILLARY BLOCKING ADDITIVES4
• External Water Proofing
CRYSTALLINE CAPILLARY BLOCKING COATINGS5
• Helps to Build Infrastructure underground
RANGE OF PRODUCTS FOR TUNNEL BORING TECHNOLOGY6
• Protect Infrastructure and Enhances Life
ANTI-CARBONATION COATINGS7
• Better E�eciency & Lower Cost of GrindingCement Plants
CEMENT GRINDING AIDS8
• Mechanical Bolting • Water Diversion • Chemical Bonding • Water Proofing
TUNNEL BOLTING & GROUTING TECHNOLOGIES9
PRODUCT LAUNCH2017
7
CAC-Easy PrimeTM
CAC-Mahashakti CDH5435Hook end Loose & Glued Steel Fiber
TM
Easy to use , carry & store.
Cost e�ective.
Improves Pump e�ciency.
Reduces Pump down time.
No side e�ect to concrete.
One pouch: 60 -70 Meters.
Replaces Cement Slurry.
Biodegradable.
Packing : 110gms, 210gms
Low carbon content based steel fiber
Cold drawn
Increases flexural toughness/residual
strength.
Provides post-crack performance.
Increased impact and abrasion resistance.
Tremendous bonding properties
Reinforcement Concrete and Shotcrete
8
Admixture Dispenser
CAC-Rockfix RB
CAC-Rockfix CB
Rasin Capsules for anchoring rock bolt
Cement Capsules for rock bolt
• 10/20/30 KL capacity
• MOC – MS Epoxy
• 100% Safe
• Air Sparging nozzle
• Can be connected to load cell
• Can be monitored with Remote access
• Unique bonding or anchoring bolts into rock or
concrete for rock / soil stabilization in mining, tunneling.
• Eco-Friendly for living beings
• High shear strength between rock and bolt
• Non-Shrink
• Quick soaking time
• Special LDPE covers fully perforated for water absorption
• Control Setting Time with water reducer & high strength
fillers and polymers.
• High shear strength between rock and bolt
9
OUR PLANTS
10
R&D CENTRE, MUMBAI
IN-HOUSE LOGISTICS
Our R & D centre is Equipped with Modern testing facilities for:
Routine Testing of Product to provide quality & consistency.
New Product Development.
Ensuring fulfillment of Client’s Specific Need.
11
CAC : DUBAI PLANT
12
EXHIBITIONS
OUR TEAM
The Big 5, Dubai 2016
Big Show, Oman 2017 Concrete Show Mumbai’ 17
Big Show Oman 2017
13
CAC : UGC PROJECTS
KRCL Projects in J&K IRCON Projects in J&K
NHAI, J&K
Max Infra : Project T3, Project T5Material Used: CAC AFA /PCE admixture
Navyuga Engineering : 4 Lane Highway: Quazigund to BanihalMaterial Used: Material Used: CAC AFA /PCE admixture
HCC : Project T48Material Used: CAC AFA /PCE admixture,Cement Capsules & Resin Capsules
ITD : Project T1, T6 to T12Material Used: CAC AFA /PCE admixture Patel Engineering : Project T2
Material Used: CAC AFA /PCE admixture,Cement Capsules & Resin Capsules
14
Hydro Project Hydro Project
NATIONAL HIGHWAYS
HCC : Tehri, Himachal PradeshMaterial Used: Cement Capsules & Resin Capsules
Jaypee Associates, ChandrakotMaterial Used: CAC AFA /PCE admixture
Gammon India, Bajoli HoliMaterial Used: Material Used: CAC AFA /PCE admixture, Cement Capsules & Resin Capsules, Steel fibre
HG Infra: Sawai Madhopur - Tonk NHMaterial Used:PCE admixture
Patel Engineering, HimachalMaterial Used: PCE admixture,Cement Capsules & Resin Capsules HG Infra: Chittorgarh Highway
Material Used: PCE admixture
15
CAC : CLIENTS // PROJECT CONTRACTORS
16
CAC : CLIENTS // RMC PLANTS
17
• To increase / extend workability• To reduce water content• To increase compressive strength• To effect cement economies• Improves the cohesiveness in concrete mix helping to reduce bleeding & segregation.• Allows water reduction till 10% whilst maintaining workability, thereby increasing strength, durability and impermeability.• Lower pumping pressure
• Low grades concrete• Precast concrete• In concrete brick & block manufacture• In hot climates to extend workability• Wherever reduced water content would be of benefit to reduce permeability.
Colour : Brown LiquidSpecific Gravity @30°C : 1.170 ±0.02Chloride content : NilpH : min. 6Shelf life : 1 year
0.3 to 0.8 kg / 100 kg of cementitious material (depending on siterequirements)
Product: CAC-Chemplast™ Packing: 250 kg drum / Bulk (9MT)
Description: Water reducing plasticiser for concrete | Specification: ASTM C 494 – Type A, IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
• Significantly increase or extend workability therefore easing placing.• To reduce water content and increase compressive strength.• To effect cement economies.• Improves the cohesive property of concrete helping to reduce segregation and bleeding.• Allows water reduction till 10% whilst maintaining workability, thereby increasing strength, durability and impermeability.• Lower pumping pressure.
• Ready Mix Concrete for lower grades• Precast concrete• In hot climates to extend workability.• Wherever reduced water content would be of benefit to reduce permeability.
Colour : Brown LiquidSpecific Gravity @30°C : 1.180 ±0.02Chloride content : NilpH : min. 6Shelf life : 1 year
0.4 to 0.9 kg / 100 kg of cementitious material(depending on siterequirements)
Product: CAC-Retardplast 10 Packing: 245 kg drum / Bulk (9MT)
Description: Water reducing & retarding plasticiser for concrete | Specification: ASTM C 494 - Type B & D, IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
• Enables controlled extension of initial set.• Highly effective in high cement, low water content mixes where its use enables concrete to be more workable without loss in strength, density and durability.• To reduce water content• The retarding action allows continuous concrete pours to be made, thus reducing the number of construction joints needed.• The strength gain of concrete containing CAC-Retardplast is enhanced.
• Ready Mix Concrete• Precast concrete• In hot climates to extend workability & control setting time of concrete• White cement concrete
Colour : Pale Straw LiquidSpecific Gravity @30°C : 1.160±0.02Chloride content : NilpH : min. 6Shelf life : 1 year
0.1 to 0.5 kg / 100 kg of cementitious material (depending on siterequirements)
Product: CAC-Retardplast Packing: 235 kg drum / Bulk (9MT) / 20 MT
Description: Retarding plasticiser for concrete | Specification: ASTM C 494 - Type B & D, IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
PRODUCT DATA
18
• Significantly increase or extend workability therefore easing placing.• To reduce water content and increase compressive strength.• To effect cement economies.• Improves the cohesive property of concrete helping to reduce segregation and bleeding.• Allows water reduction till 10% whilst maintaining workability, thereby increasing strength, durability and impermeability.• Lower pumping pressure• Moderate to extended retardation depends on the dosage.• Helps to eliminate cold joints.
• Ready Mix Concrete for lower grades• Precast concrete• In hot climates to extend workability.• Wherever reduced water content would be of benefit to reduce permeability.
Colour : Brown LiquidSpecific Gravity @30°C : 1.200 ±0.02Chloride content : NilpH : min. 6Shelf life : 1 year
0.4 to 0.8 kg / 100 kg of cementitious material(depending on siterequirements)
Product: CAC-Retardplast 30 Packing: 245 kg drum / Bulk (9MT)
Description: Water reducing & retarding plasticiser for concrete | Specification: ASTM C 494 - Type B & D, IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
• Reduces setting time depending on the dosage and ambient temperature.• Helps to achieve high early strength, hence reduction in de-shuttering time. Hence increases the construction work speed.• Helps in reducing cement content for a required strength.• Reduces construction cost- no delay due to cold weather, use of OPC instead of Rapid Hardening Cement.
• Low temperature concrete• Precast and Reinforced Concrete• Concrete block and mortar • Concrete Pipes, Brick laying mortar mixes
Colour : Colourless LiquidSpecific Gravity @30°C : 1.260 ±0.02Chloride content : NilShelf life : 1 year
03 to 38 kg/m3, depending upon acceleration desired.
Product: CAC-Setplast Packing: 245 kg drum
Description: Accelerating Plasticiser to reduces Setting time of concrete | Specification: ASTM C 494 - Type C, IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
• Allows water reduction more than 20% whilst maintaining high flowability at lower water cement ratio, thereby increasing high early & ultimate strength.• With congested reinforcements.• Increases durability & impermeability.• Concrete with CAC-Superflow shows higher strength than concrete without admixture having the same workability at early and later ages.• Lower pumping pressure.
• High Early, High Strength Concrete• Precast / Pre-stressed Concrete• Ready Mix Concrete for Higher grades• Pumped concrete
Colour : Brown LiquidSpecific Gravity @30°C : 1.205 ±0.02Chloride content : NilpH : min. 6Base : Sulphonated Naphthalene Formaldehyde.Shelf life : 1 year
0.5 to 1.5 kg / 100 kg of cementitious material(depending on siterequirements)
Product: CAC-Superflow / Superflow SF Packing: 250 kg drum / Bulk (9MT)
Description: High Range Water Reducing Superplasticiser for Precast concrete | Specification: ASTM C 494 - Type F, IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
PRODUCT DATA
19
• Ideal admixture for re-dosing to extend workability without delay setting. • Maintaining high flowability at lower water cement ratio, thereby increasing high early & ultimate strength.• With congested reinforcements.• Increases durability & impermeability.• Lower pumping pressure.
• Re-dosing for all general grades concrete• Ready Mix Concrete to extend workability without strength loss and without delay setting. • Pumped concrete
Colour : Brown LiquidSpecific Gravity @30°C : 1.180 ±0.02Chloride content : NilpH : min. 6Base : Sulphonated Naphthalene Formaldehyde.Shelf life : 1 year
0.2 to 1.5 kg / 100 kg of cementitious material(depending on siterequirements)
Product: CAC-Superflow RD/SF/LF TM Packing: 235 kg drum / Bulk (9MT)
Description: High Range Water Reducing Superplasticiser for Re-dosing | Specification: ASTM C 494 - Type F, IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
• High workability for longer period.• Allows water reduction more than 20%.• With congested reinforcements.• Increases durability & impermeability.• Lower pumping pressure.• Higher ultimate strength.
• Ready mix concrete• Piling concrete• Precast concrete• Casting in hot climates• Pumped concrete
Colour : Brown LiquidSpecific Gravity @30°C : 1.250 ±0.02Chloride content : NilpH : min. 6Base : Sulphonated Naphthalene Formaldehyde.Shelf life : 1 year
0.5 to 1.2 kg / 100 kg of cementitious material(depending on siterequirements)
Product: CAC-Superflow 60 / 60 (S2) / 65 / 66 / 65 (PSC) Packing: 250 kg drum / Bulk (9MT)
Des: High Range Water Reducing & Retarding Superplasticiser for Higher Grades Concrete | Specs: ASTM C 494 - Type G, IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
• High workability for longer period.• Allows water reduction more than 20%.• With congested reinforcements.• Increases durability & impermeability.• Lower pumping pressure.• Higher ultimate strength.
• Ready mix concrete• Piling concrete• Precast concrete• Casting in hot climates• Pumped concrete
Colour : Brown LiquidSpecific Gravity @30°C : 1.220 ±0.02Chloride content : NilpH : min. 6Base : Sulphonated Naphthalene Formaldehyde.Shelf life : 1 year
0.5 to 1.2 kg / 100 kg of cementitious material(depending on siterequirements)
Product: CAC-Superflow 35 / 35 U / 35 C / 30 / 30G / Packing: 250 kg drum / Bulk (9MT)
Des.: High Range Water Reducing & Retarding Superplasticiser for Lower Grades Concrete | Specs:ASTM C 494 - Type G, IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
PRODUCT DATA
20
• Excellent dispersion resulting in High workability• Increases early & ultimate strengths• Increases Flexural strength & E-modulus• Can be placed and compacted in congested reinforcements• Reduced labour requirements.• Increases durability & impermeability• Improved surface finish• Ideal for use in Self-compacting Concrete along with CAC-VMA, Viscosity Modifying Admixture.
• Precast / Pre-stressed Concrete• High Strength Concrete• High Performance Concrete• Self Compacting Concrete• Pumped concrete
Colour : Brown LiquidSpecific Gravity @30°C : 1.080 ±0.02Chloride content : NilpH : min. 6Base : modified Poly-carboxylic Ether.Shelf life : 1 year
0.5 to 1.5 kg / 100 kg of cementitious material(depending on siterequirements)
Product: CAC-Hyperfluid / HES 40 / HES 46 / Hyperfluid LF/SS Packing: 225 kg drum / Bulk (9MT)
Product: CAC-Hyperfluid R 100 / R150 Packing: 225 kg drum / Bulk (9MT)
Des: Superplasticiser for High Performance concrete based on Poly-carboxylic Ether | Specification: ASTM C 494-Type F, IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
• Excellent dispersion resulting in High workability and superb slump retention.• Increases early & ultimate strengths• Increases Flexural strength & E-modulus• Can be placed and compacted in congested reinforcements without vibration.• Reduced labour requirements.• Increases durability & impermeability• Improved surface finish
• Ready Mix Concrete for Higher grades with more retention time.• Self Compacting Concrete• High Strength Concrete• High Performance Concrete• Precast / Pre-stressed Concrete• Pumped concrete
Colour : Brown LiquidSpecific Gravity @30°C : 1.140 ±0.01Chloride content : NilpH : min. 6Base : modified Poly-carboxylic Ether.Shelf life : 1 year
0.5 to 1.2 kg / 100 kg of cementitious material(depending on siterequirements)
Product: CAC-Hyperfluid R (above M60) / Hyperfluid Plus ‘G’ (Mid-PCE for M45 to M55) / CAC-Hyperfluid Plus(H2)- upto M45
Packing: 225 kg drum / Bulk (9MT)
Description: Superplasticiser with retention for High Performance concrete based on Poly-carboxylic EtherSpecification: ASTM C 494 - Type G, IS 9103: 1999
Description: Superplasticiser with retention for High Performance concrete & Self Compacting Concrete based on Poly-carboxylic EtherSpecification: ASTM C 494 - Type G IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
• Excellent dispersion resulting in High workability and superb slump retention.• Increases early & ultimate strengths• Increases Flexural strength & E-modulus• Can be placed and compacted in congested reinforcements without vibration.• Reduced labour requirements.• Increases durability & impermeability• Improved surface finish• Ideal for use in Self-compacting Concrete along with CAC-VMA, Viscosity Modifying Admixture.
• Ready Mix Concrete for Higher grades with more retention time.• Self Compacting Concrete• High Strength Concrete• High Performance Concrete• Precast / Pre-stressed Concrete• Pumped concrete
Colour : Brown LiquidSpecific Gravity @30°C : 1.110 ±0.01Chloride content : NilpH : min. 6Base : modified Poly-carboxylic Ether.Shelf life : 1 year
0.5 to 1.2 kg / 100 kg of cementitious material(depending on siterequirements)
Features / Uses Typical Application Technical Information Dosage / Coverage
PRODUCT DATA
21
• Increases freeze / thaw resistance.• Reduces segregation and bleeding.• Reduces permeability- increased water tightness.• Greatly improved stability of air entrainment.• Improved plasticity and workability.• Ready to use solution is at optimum strength for accurate dispensing.• Improved surface finish
Entraining a controlled air content in wide range of concrete types:• Pavement Quality Concrete• Normal mix concrete• Low Slump Concrete• Concrete containing high carbon content fly ash• High fines concrete• Concrete using high-alkali cement• High temp. concrete
Colour : Light Brown LiquidSpecific Gravity @30°C : 1.020 ±0.02Chloride content : NilpH : min. 6Shelf life : 1 year
0.01 to 0.10 kg / 100 kg of cementitious material(depending on siterequirements)
Product: CAC-AEA Packing: 210 kg drum / Bulk (9MT)
Description: Air Entraining Admixture for concrete | Specification: ASTM C 260 - 86
Features / Uses Typical Application Technical Information Dosage / Coverage
• Increases Strength• Increases Flexural strength & E-modulus• Substantially improved resistance to chemical and mechanical attack• Prevents bleeding and segregation• Increases durability & impermeability• Reduced dosages of activators / accelerators
• High Strength / High Performance Concrete• Precast / Pre-stressed Concrete• All types of wet- mixed sprayed concrete• Underwater concrete• Concrete with low cement• Tunnel grouting
Colour : Grey powderDensity : 0.55 – 0.70Chloride content : <0.1%Shelf life : 1 year
05 to 15% of weight of cementitious material (depending on siterequirements)
Product: CAC-92 MS Packing: 25 kg bag
Description: Densified Microsilica | Specification: ASTM C 1240 – 2001
Features / Uses Typical Application Technical Information Dosage / Coverage
• Increased viscosity and thixotropic properties• Controlling bleeding and segregation for fluid mix• Improved stability during transportation & placing• Enhanced pumping & finishing• Reduced sagging- dimensional stability• Enables flexibility in mixture proportioning
• Self Compacting Concrete• Fluid Precast / Pre-stressed Concrete• Concrete with gap-graded aggregates• Concrete containing manufactured sand• Lean concrete
Colour : Colourless liquidSpecific Gravity @30°C : 1.000 ±0.01Chloride content : <0.2%pH : min. 6Shelf life : 1 year
0.05 to 0.5 kg / 100 kg of cementitious material(depending on siterequirements)
Product: CAC-VMA Packing: 200 kg drum
Des: Viscosity Modifying Admixture (VMA) for Self Compacting Concrete. | Specs: EFNARC-Guidelines for VMA for concrete - Sept.2006
Features / Uses Typical Application Technical Information Dosage / Coverage
PRODUCT DATA
22
• Increases cohesiveness in concrete / plaster• Increases durability, by increase in imperme ability• Does not affect the setting time and strength• Ready to use liquid, hence dispersion is better• Reduces shrinkage cracks in plaster & concrete• Economical in application
• For waterproofing of concrete & sand-cement mortar used in basements, roof slabs, screeds, water retaining structures, bathrooms & balconies, etc.
Colour : Brown LiquidSpecific Gravity @30°C : 1.180 ±0.02Chloride content : NilpH : min. 6Shelf life : 1 year
300 ml / 100 kg of cement
Product: CAC-LIW / CAC - LPB WP 73 Packing: 250 kg drum / 25 kg can
Description: Liquid Integral Waterproofing admixture for concrete and plaster | Specification: ASTM C 494-Type A & D
Features / Uses Typical Application Technical Information Dosage / Coverage
• Corrosion Inhibitor that provides basic corrosion protection for steel reinforced concrete structures• Provides effective corrosion protection against chlorides in concrete
• All types of RCC structures like marine structures, parking garages, bridge decks, slabs, floors, etc.
Colour : Colourless Liq.Specific Gravity @30°C : 1.260 ±0.02Chloride content : NilShelf life : 1 year
12 to 38 kg/m3, depending upon site requirement
Product: CAC-Corrobit Packing: 245 kg drum
Description: Corrosion Inhibiting admixture for RCC | Specification: ASTM C 494 - Type C
Features / Uses Typical Application Technical Information Dosage / Coverage
• Suitable for all types of formwork / shuttering• Non-staining• Reduces imperfections on concrete surfaces• Economical & increases life of formworks
• On all types of mould or formwork like wood, steel, etc.
Colour : Amber LiquidSpecific Gravity @30°C : 0.840 ±0.01Shelf life : 1 year
Coverage is 30 -70 m2 /Ltr, depending on formwork.
Product: CAC-MRA Packing: 20 & 210 Ltr drums
Description: Mould Release Agent | Specification: Water Research Council approved for use with potable water
Features / Uses Typical Application Technical Information Dosage / Coverage
• Save your pump fuel cost• The number of pump blockages will be minimized• It is most economical & environmentally safe• Effective priming and pumping with lesser cost and easy operation
• Replacement to convention sand-cement slurry priming, cost effective and operation friendly.
Colour : white powderShelf life : 6 months
Coverage is 55 -65 m /pouch, depending on internal surface of pipeline.
Product: CAC-Easy Prime Packing: 110 gm & 210 gm / pouch (1 box contains 100 pouches)
Description: Concrete Pump & pipeline primer | Specification: -
Features / Uses Typical Application Technical Information Dosage / Coverage
PRODUCT DATA
23
• It has good flowability and pourability which ensures highest contact area with the machine base plate and other load bearing areas.• It has excellent non-shrink property.• It is free from chlorides and other aggressive chemicals which attack steel and hence ensure non-corrosive supporting system.• Develops early high early strength without the use of chlorides.
• It is used for precision grouting where it is essential to withstand static & dynamic loads.• Grouting of base plates of turbines, compressors, boiler feed pumps, etc.• Anchoring wide range of fixings.
Grey Powder form.Comp. Strength: 50 to 90 MPaTensile strength: 3.5MPaExpansion: 1 to 3 hoursShelf life: 6 months if kept in dry store in sealed bags.
Yield for 25 kg bag is 12.5 to 13.3 liter depending on the consistency of the grout.
Product: CAC-Expacreet CG 50/ 60/ 70/ 90 Packing: 25 kg bag
Description: Free flow, Non-shrink high strength cementitious grout | Specs: BS 1881 Part 116 BS 4551
Features / Uses Typical Application Technical Information Dosage / Coverage
• Excellent adhesion to cementitious substrates.• CAC-BONDING AGENT modified mortars have superior Flexural, Compressive, Adhesive and Impact strength, as well as excellent abrasion resistance.• Excellent waterproofing capability and widely used for waterproofing of floors, rooftops, basements and maintenance of seepage and leakage.• It can be used for crack filling and as tile jointing compound by mixing with white cement.• Reduces cracking in mortar and screed. Suitable for internal & external applications.
• As a bonding aid between old and new concrete / mortar.• Water resistant plasters or renders. • Useful as additives for making repair mortars / concretes.• Useful as a primer for repair mortars both for vertical and overhead applications.
White, milky liquidSpecific Gravity @30°C: 1.050±0.050Solid content (%): 47 ±0.5pH: 9 ± 1
4-7m2/ liter depending on the substrate absorption
Product: CAC-Bonding Agent Packing: 01kg, 5kg, 20kg & 220 kg drum.
Description: Acrylic based bonding agent
Features / Uses Typical Application Technical Information Dosage / Coverage
• Allows water reduction more than 20% whilst maintaining high flowability at lower water cement ratio, thereby increasing high early & ultimate strength.• With congested reinforcements.• Increases durability & impermeability.
• Use in powder construction products• Use as liquid admixture after mixing with water for concrete
Light brown free flowing powder.Bulk density: 550-750 gm/litpH: min. 6Moisture: max. 7%Sulphate: 8 to 9.5%
0.15 to 0.5 kg / 100 kg of cementitious material(depending on siterequirements)
Product: CAC-Superflow (P) Packing: 25 kg HDPE bag
Description: High Range Water Reducing Superplasticiser in Powder | Specs: ASTM C 494 - Type F IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
PRODUCT DATA
24
• Unique bonding or anchoring bolts into rock or concrete for rock / soil stabilization in mining, tunneling.• Control Setting Time with inorganic high strength fillers.• Eco-Friendly for living beings • Quick Installation and early strength development.• High shear strength between rock and bolt• Non-Shrink
• Rock Bolting, bar Fixing, Crack filling, and Rock & Concrete joint in Mining & Tunneling
High Compressive Strength (MPa)30 Minutes – 40 Minimum1 Hour – 90 MinimumBond Strength (Tone) -10 MT Minimum Slow Set capsule – 4 to 5 MinutesFast Set Capsule – 2 to 3 Minutes
As per drill hole & Rock bolt length, and Rock Condition
Product: CAC-ROCKFIX RB Packing: 50 Nos. Capsules Per Box
Description: Unsaturated Polyester Resin Based Capsule for Strata Controlling for Mines & Tunnels
Features / Uses Typical Application Technical Information Dosage / Coverage
• Quick soaking time• Special LDPE covers fully perforated for water absorption• Unique bonding or anchoring bolts into rock or concrete for rock / soil stabilization in mining, tunneling.• Control Setting Time with water reducer & high strength fillers and polymers.• Eco-Friendly for living beings • High shear strength between rock and bolt• Non-Shrink
• Rock Bolting, bar Fixing, Crack filling, and Rock & Concrete joint in Mining & Tunneling
High Compressive Strength (MPa)3 Days – 20 Minimum7 Days – 35 Minimum28 Days- 45 MinimumSetting Time (Minutes)Initial Setting Time – 300 Max.Final Setting Time -500 Max.
As per drill hole & Rock bolt length, Rock Conditions
Product: CAC-ROCKFIX CB Packing: 50 Nos. Capsules Per Box
Description: OPC Cement Based Capsule for Strata Controlling for Mines, Tunnels
Features / Uses Typical Application Technical Information Dosage / Coverage
• Use in sprayed concrete application for quick setting of concrete in tunnels to hold the parent rock.
• Use in sprayed concrete application for quick setting of concrete in tunnels to hold the parent rock.• Less rebound.
Light Yellow liquidSpecific gravity @25°C: 1.445±0.02pH: 2 -4Solids: 54 ±2.7%
5 to 8% of cementitious material
Initial set time: 3 minuteFinal set time: 12 minute
Product: CAC-Shotcrete AFA Packing: 250 kg HDPE drums
Description: Alkali Free Accelerators for Shotcrete | Specification: - ASTM C 1141 IS 9103: 1999
Features / Uses Typical Application Technical Information Dosage / Coverage
PRODUCT DATA
25
• Eliminates the need for water • Single application • Promotes a harder dust free surface • Cured film is clear and water repellent • Reduces drying shrinkage • High curing efficiency • Reduced labour costs • Water based • Solar reflective
• As a more effective and economical alternative to hessian and water and polythene curing regimes. • Suitable for use on all concrete surfaces.
White liquidSpecific gravity @25°C: 1.00 ±0.050Flash point: Not applicableFinished film: white solar reflective, tack free, water repellant film.Shelf life: 6 months
5 sq. m. per liter
Product: CAC-Curewell WB 16 (W) / 20 Packing: 20 & 210 lit drums
Description: Wax Base Curing compound | Specification: ASTM C 309 Type II class A
Features / Uses Typical Application Technical Information Dosage / Coverage
• Low carbon content based steel fiber• Cold drawn • Increases flexural toughness / residual strength. Provides post-crack performance.• Increased impact and abrasion resistance.• Tremendous bonding properties • Reinforcement Concrete and Shotcrete • High aspect ratio, Tunnel linings, Manholes, Risers, Burial Vaults, Septic Tanks, Curbs, Pipes, Covers, Sleepers and Roller compacted concrete with steel fibers• Rock stabilization, tunnels, dams, mines. Bridges arches, dome structures, power-house,• Stabilization of slopes to prevent landslides repair of eteriorated concrete surface, water channel etc.
• Steel Fiber in Shotcreting• Hydraulic Structures• Heavy duty flooring applications – Internal & external • Civil engineering applications• Composite metal decks• Joint less floors
Tensile strength (MPa) – 1100 MinimumDiameter (mm) – 0.65 ± 0.06Length (mm) - 35± 5Configuration – Loose, Hook end round wire based
As per concrete quality and applications
Product: CAC-Mahashakti CDH5435 Packing: 25 kg HDPE bag
Description: Hook end Loose Steel Fiber
Features / Uses Typical Application Technical Information Dosage / Coverage
• CAC-Flexeal PS is a two part sealant based on a liquid polysulphide polymer. • This is available in two grades Gun grade and Pourable grade.• Recommended for sealing horizontal structural expansion joints in most civil engineering structures. Ex. building superstructures, subways, basements, floors and reservoirs.
• Forms a tough elastic rubber-like seal.• Accommodates continuous and pronounced cyclic movement.• Excellent adhesion to most common substrates.• High resistance to ageing influences, physical damage and climatic extremes.
Grey - Pouring Grade Poly Sulphide Sealant { 2 component } Two-part CompoundBase : paste & Curing agent : pasteFlash point : Over 650 CDensity : 1.60 - 1.65 Kg/ltr
Base: 8 -10 m2/ ltrCuring Agent: 7.5 m2/pack
Product: CAC-Flexeal PS Packing: 4kg pack
Description: Pouring Grade Two Component Poly Sulphide Sealant
Features / Uses Typical Application Technical Information Dosage / Coverage
PRODUCT DATA
26
WEST (H.Q): Tel: +91 22 2768 2752 / 27670847Fax: 91 22 27614820, Mobile: +91 99874 44500Email: enquiry@cac-admixtures.cominfo@cac-admixtures.comwww.cac-admixtures.com
CAC Middle East FZEPO Box 513413, Saif Zone, Sharjah, UAEwww.cac-admixtures.com
Mumbai / Chennai / Delhi / U.A.ELaunching Soon: Doha (Qatar)
PLASTICISERCAC - CHEMPLAST
CAC - RETARDPLAST / 10 / 30
CAC - SETPLAST
CAC - LIW
SUPER PLASTICISERCAC - SUPERFLOW / SF / RD / LF
CAC - SUPERFLOW 35U / 60 / 65 / 66
HYPER PLASTICISERSCAC - HYPERFLUID PLUS G / H2 / H6
CAC - HYPERFLUID R / R100 / A1
R-150 / R40
CAC - HYPERFLUID HES 40 / 46 / SS / LF
CONCRETE PUMP AIDCAC - EASY PRIME
CEMENTITIOUS GROUTSCAC - EXPACREET CG / 50 / 60 / 70 / 90
READY MADE PLASTER / JOINTING MORTARCAC - ENVOPLASTTM
CAC - ENVOFIXTM
POWDER ADMIXTURESCAC - SUPERFLOW (P),
CAC - HYPERFLUID (P)
CURING COMPOUNDSCAC - CUREWELL WB 16 (W) / 20
UGC PRODUCTSCAC - SHOTCRETE AFA (ALKALI FREE ACCELERATORS)
CAC - ROCKFIX RB (RESIN CAPSULES)
CAC - ROCKFIX CB (CEMENT CAPSULES)
CAC - MAHASHAKTI CDH 5035 (STEEL FIBRE)
DENSIFIED MICROSILICACAC - 92 MS
POLY SULPHIDE SEALANTCAC-FLEXEAL PS
OTHER PRODUCTSCAC - VMA / AEA / MRA / CORROBIT
CAC - BONDING AGENT / 50
Concrete Additives & Chemicals Pvt.ltd.
CAC AT A GLANCE
PRODUCT RANGEWe provide entire range of Admixtures, tailor-made as per customers request on Pan - India basis.
Our Techno - Commercial experts provide solutions to customers with the least possible lead time.
We have a capacity of 8000MT p.m. among our4 Plants at Mumbai, Chennai, NCR & Dubai thatpromises JUST IN TIME supplies to customers.
Established Under Ground Construction (UGC)Division with latest techno - commercial products at Delhi.
Providing good quality, consistant products atreasonable cost.
Having long term Goal to establish ourselvesas Reliable Business Associates to ConstructionIndustry globally.
Customer Delight is our Objective.
ISO 9001:2008 Certified Company
27
Triton is a fast-growing and respected brand in the roofing and building materials industry; manufacturing quality products represented throughout the world by quality people.
The TRITON Difference Cost-Saving Green Solutions
Adding value to existing roofs with seamless, fluid-applied membranes that possess high elongation, extreme fire ratings, severe hail resistance, durability,and heat dissipation.
Non-disruptive installations with no odors, no harmful VOC’s, no flames or hot kettles, no intrusion, and no waste.
Servicing our clients with pre-qualified, trained contractors backed by our 30- year roof consulting background and smart, long-term warranties.
Triton’s alternative roofing, waterproofing, and corrosion lining solutions benefit building owners with existing assets
TOGETHER BRINGSYOU
WATERPROOFINGAND CORROSION
PROTECTIONPRODUCTS
INNOVATIVETHINKING
EXTRAORDINARYRESULTS
28
&
TRITOflex is an instant-setting liquid rubber membrane that is water-based and environmentally safe. It is a tough yet extremely flexible material that is e�ciently sprayed to any thickness in a single pass, creating a fully-adhered, monolithic waterproofing membrane with no waste.
TRITOtrowel™ is a high viscosity water-based patch and flashing compound specifically designed as a high tensile strength yet flexible brush or trowel applied waterproofing membrane. It is typically used as a flashing component for the TRITOflex™ system however, it is ideal for sealing leaky roof penetrations, ductwork seams, cracks, tears and punctures in almost any roof system.
TRITOtherm™ is an acrylic and ceramic based thermal insulating coating that reflects UV rays and dramatically reduces heat transfer through it resulting in a thermal insulating barrier. It is also a premium protective coating that prevents premature degradation to roof membranes it is applied to.
TRITON PRODUCTS
29
Benefits of a green roof versus a traditional roof include: reduces stormwater runo� and improves water quality, reduces energy consumption, promotes biodiversity, helps reduce air pollution and improves air quality, and increases overall roof life. If you’re interested in learning more, I’m happy to provide additional information!
A Unique liquid rubber that can be sprayedon your roof making it water tight
CAN YOU DREAM OF HAVING A GARDEN ON YOUR ROOF ?The first question that comes in your mind is
Water LeakageWE HAVE A GREAT SOLUTION FOR THIS
15 YEARS GUARANTEE
1
2
3 4
5
Existing EPDM roof
Installing sedum matsover the aggregate
growing media,which is held in by
metal edging
Checking TRITOflex thickness with our mil gauge
6
Rock ballast was installed over the drainage mat around the roof hatch and HVAC unit for maintenance
7
The finished green roof!
Sealing the roof perimeter with TRITOtrowel
30
&
OUR SOLUTIONSROOF RESTORATIONPreserving existing investments with a common sense retrofit
• Metal• Single-ply (PVC, TPO, EPDM)• Modified-bitumen and built-up
VEGETATIVE ROOFSPonding water, root resistant and potablewater-safe membranes
• Food roof• Blue roofs: storm water retention• Green Walls
STRUCTURAL WATERPROOFINGFlexible, durable protection from the elements
• Deck and parking structures• Bridges• Tunnels• Foundations
CORROSION PROTECTIONProtecting concrete and steel from corrosive elements
• Mining and refinery structures• Containment dams• Liverstock facilities
31
JOINT VENTURE WITH ASSOCIATION WITH
Concrete Additives & Chemicals Pvt. LtdPlot No. D-9/4, Chemical & Alkali Complex, Turbhe MIDC,
Navi Mumbai - 400 705 | Tel: +91 22 2768 2752 / 2767 0847 | Fax: +91 22 2761 4820 Email: enquiry@cac-admixtures.com
www.cac-admixtures.com
des
igne
d b
y: g
oua
che
n b
rush
des
ign
stud
io /
99
300
034
58