Post on 05-Feb-2016
description
transcript
Welcome Misa
History
MISA Spa was founded in 1969 by the Micheletti family with the intention of producing cold rooms and refrigerating counters.Its characteristic consists of a constant research of new productive technologies by gaining a good portion of the Italian market and part of the foreign one introducing a reliable and advanced product, both technology and quality wise.Starting from May 2011 MISA became part of EPTA Group.
CORPORATE
Headquarter
MISA Pomezia
CORPORATE
Plants
MISA Pomezia Modular commercial Cold Rooms
MISA Roma Industrial Cold Rooms
Total Surface
Misa Pomezia Misa Roma
mq 39.000mq 28.000
Covered SurfaceMisa Pomezia Misa Roma
mq 18.000mq 7.000
Employees Misa N° 125
Global Turnover22.700.000 €55% Domestic market45% Export
CORPORATE
The new plant for the productionof isothermal panels
Thermal insulation research made on new frontiers has givenMISA the opportunity to conceive and patenta new technology for the construction of panelsbased on the Misa Vacuum System
RESEARCH
Pentane cycle
According to rules and regulations of the Kyoto convention regarding the use of HCFC gas that is harmful to environment, Misa will adopted a new blowing agent in the construction of isothermal panels - starting second semester 2002 - with the same results, but giving better results.
-does not damage ozone
-hardly any greenhouse effect-excellent insulating characteristics and foam density
Pentane and its isomers
RESEARCH
Ensure a costant high quality of the product togheter with an improvement of all the phisical and mechanical features as:- perfectly flat surface- high grade of foam omogeneity- high resistance to compression- high density and foam-sheet adherence
Features Comparative datas between a common PUR and a MVS PUR PURcomparativi tra un PUR comune e un PUR MVSPOLYURETHANE (PUR)
ADHERENCE OF FOAM TO SHEET kPa
COMPRESSION kPa
CORE DENSITY kg/m3
COMMON PUR
100
120
34-38
MVS PUR.
140
160
36-38
MVS PANEL
NON TOXIC PVC 120 MICRON
GALVANIZED STEEL SHEET
MVS Technology
RESEARCH
The cold rooms included in the yellow and green area are supplied with reticular meams to support ceiling panels
The cold rooms included in the yellow area, as an alternative, can be supplied without beams but with maxi panels
The dimensions indicated are net internal in cm. The external dimensions can be obtained by adding the panel thickness
PRECALCULATED COLD ROOMS KLC
FAST-FITFAST-FIT
The panels can be aligned and connected together perfectly by means of the Fastener Fast-fit System and by a slight and controlled traction of the tightening key. This way the panels can be assemmbled and disassembled with no problems and whenever necessary.
Assembly and DisassemblyAssembly and Disassembly
FASTENERFASTENER
SINGLE AND COMBINED COLD ROOMS KLC
VENTILATION SPACE
SINGLE AND COMBINED COLD ROOMS KLC
ASSEMBLING OF FLOOR PANELS
FITTING OF COLDROOMS WITHOUT FLOOR
SINGLE AND COMBINED COLD ROOMS KLC
FITTING OF WALL PANELS
FITTING OF CEILING PANELS
RANGEGAMMA
To obtain external dimensions, thikness of panel has to be added
6 cm thikness for positive rooms10 cm thikness for negative rooms
MINI COLDROOMS KLM
Entirely modular and complete system that permits the realization of totally integrated combined cold rooms .
Patented edge
Internal and external rounded corner
Fastener Fast-fit centering system
three ways modular partition
wall
Non modular partition wall
Isothermal panel of new conception
COMBINED COLD ROOMS KLC
CORNER CAP KL S6-S10
PARTITION CAP. KL S6/S10
CORNER CAP KL S6-S10 CORNER CAP KL S6-S10
CORNER CAP KL S6-S10
PARTITION CAP KL S6/S10
COMBINED COLD ROOMS KLC
FITTING OF COLD ROOM S6/S10
SINGLE AND COMBINED COLD ROOMS KLC
SINGLE AND COMBINED COLD ROOMS KLC
SELF SERVICE CABINETS AND COLD ROOMS hi203
COMMERCIAL WALK-IN DOOR
WALK-IN DOOR WITH MID-RAIL
COMMERCIAL SLIDING DOORS
WALK-IN DOORS ST.STEEL FRAME
SLIDING DOORS ST.STEEL FRAME
SLIDING DOORS WITHOUT FRAME
SWING DOOR ALUMINIUM FRAME
ALUMINIUM FRAMES AND DOORS
FX
PAL
FLOOR PANELS RANGE
FREEBLOCKHermetic air condensing monoblocks
MISASPLIT – MSGHermetic refrigerating split plants – air condensation - tropicalized
MISAERMHermetic refrigerating plants – air condensation - tropicalized
MISAMETCSemi-hermetic refrigerating plants – air condensation - tropicalized
Industrial Coldrooms – Beta Panel
Maximum thermal insulation thanks to BETA Panel
Some Structural Details
Industrial Coldrooms– Structural Details
The know-how developped in this sector and the experience gained all over the world, has enables us to become one of the most qualified partner of the food industry that deals with preocessing and conservation of food and must count on a completely reliable advanced techological product.