Post on 22-Feb-2016
description
transcript
DIVIDER INSERT HERE:
wire rigging systems
wire rigging systems wire rig
gin
gsystem
s
93Online catalogue: www.anzor.co.nz/arch
WIRE RIGGING SYSTEMS
• Wire sizes: 3mm - 6mm.
• Wire types: 1x19, 7x7, 7x19.
• Wire types: Anzor 316 wire.
• Application: a wide variety of applications including horizontal wire, roof plane (criss cross bracing), and hanging vertically applications.
• Economical option.
SWAGE STuD AT EAcH END
WIRE RIGGING SYSTEMS
S7801 RH Swage Stud: page 98
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impurities that may have attached during manufacture. This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusively for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish:Bright and smooth for increased corrosion resistance.
Types:1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes:
TypesCompact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application:Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x197x77x19
1x19
1x371x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application:Large structural projects, such as bridges.
Application:Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types:A conventional 1x37 and 1x61 construction wire stand.
Code:MFW...U
Maintenance:Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Wire Rope in 316 or 316 Ultra: page 104
+ +S7801 LH Swage Stud:
page 98
S3121/5 Toggle/Swage Turnbuckle to tension wire: page 95
S7805 Swage Toggle Terminal: page 97
+
• Wire sizes: 2.5mm - 10mm.
• Wire types: 1x19, 7x7, 7x19.
• Wire material: 316 or 316 Ultra.
• Swaging: hex swaged (by hand tool) or roll swaged.
• Application: suited for membrane structures or shade sails subject to dynamic forces.
ToGGlE TuRNBucKlE
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impurities that may have attached during manufacture. This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusively for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish:Bright and smooth for increased corrosion resistance.
Types:1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes:
TypesCompact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application:Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x197x77x19
1x19
1x371x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application:Large structural projects, such as bridges.
Application:Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types:A conventional 1x37 and 1x61 construction wire stand.
Code:MFW...U
Maintenance:Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Wire Rope in 316 or 316 Ultra: page 104
+
S3121P Jaw/Swage Turnbuckle to tension wire: page 96
S7803 Swage Fork Terminal: page 97
• Wire sizes: 2.5mm - 10mm.
• Wire types: 1x19, 7x7, 7x19.
• Wire material: 316 or 316 Ultra.
• Swaging: hex swaged (by hand tool) or roll swaged.
• Application: suited for static applications e.g. flag poles, balustrades, staircases, and straight line installations.
JAW TuRNBucKlE
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impurities that may have attached during manufacture. This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusively for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish:Bright and smooth for increased corrosion resistance.
Types:1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes:
TypesCompact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application:Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x197x77x19
1x19
1x371x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application:Large structural projects, such as bridges.
Application:Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types:A conventional 1x37 and 1x61 construction wire stand.
Code:MFW...U
Maintenance:Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Wire Rope in 316 or 316 Ultra: page 104
+ +
Online catalogue: www.anzor.co.nz/wire-rigging
94
WIRE RIGGING SYSTEMS
P2H Adjuster Unitpage 101
• Wire sizes: 8mm - 42mm.
• Wire material: 316 stainless steel.• Wire type: HAMMA Pro-Strand or Mega-Strand.
• Applications: membrane structures, glass facades, structural cabling (e.g. pedestrian bridges).
• Installation: Wire can be tensioned from one end.
P2H ADJuSTER - WITH HAMMA HIGH TENSIlE HAMMA WIRE
P2H Adjuster Unit to tension wire: page 101
HAMMA High Tensile 316 Wire - page 104
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impurities that may have attached during manufacture. This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusively for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish:Bright and smooth for increased corrosion resistance.
Types:1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes:
TypesCompact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application:Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x197x77x19
1x19
1x371x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application:Large structural projects, such as bridges.
Application:Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types:A conventional 1x37 and 1x61 construction wire stand.
Code:MFW...U
Maintenance:Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
+ +
RDS RH Adjuster Unit:page 100
• Wire sizes: 3mm - 8mm.
• Wire material: 316 stainless steel.• Wire type: Anzor 316 wire.
• Applications: used in a criss cross formation in an bracing application.
• Installation: Not for the faint of heart. Wire has to be turned simultaneously from both ends to tension.
RDS FoRK + PBI SWAGE STuD
RDS LH Adjuster Unit: page 100
+ +
S7803 Swage Fork Terminal: page 99
S7801 RH Swage Stud: page 99
• Wire sizes: 3mm - 6mm.
• Wire types: 1x19, 7x7, 7x19.
• Wire types: Anzor 316 wire.
• Application: horizontal wire, roof plane (criss cross bracing) and vertically hanging applications with the swage fork visible.
SWAGE FoRK TERMINAl + SWAGE STuD
+ +
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impurities that may have attached during manufacture. This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusively for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish:Bright and smooth for increased corrosion resistance.
Types:1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes:
TypesCompact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application:Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x197x77x19
1x19
1x371x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application:Large structural projects, such as bridges.
Application:Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types:A conventional 1x37 and 1x61 construction wire stand.
Code:MFW...U
Maintenance:Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Wire Rope in 316 or 316 Ultra: page 104
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impurities that may have attached during manufacture. This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusively for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish:Bright and smooth for increased corrosion resistance.
Types:1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes:
TypesCompact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application:Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x197x77x19
1x19
1x371x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application:Large structural projects, such as bridges.
Application:Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types:A conventional 1x37 and 1x61 construction wire stand.
Code:MFW...U
Maintenance:Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Wire Rope in 316 or 316 Ultra: page 104
Online catalogue: www.anzor.co.nz/wire-rigging
95Online catalogue: www.anzor.co.nz/arch
A toggle end is the preferred choice for membrane structures as it can move in two directions.
Online catalogue: www.anzor.co.nz/wire-riggingInformation used exclusively under permission of Strudyna Co. Ltd
M
L1
L
OD
Safe working load - Standard safety factor for working load is 25% of Breaking Load
codeSize M (mm)
Wire Ø (mm)
l (mm)
l1 (mm)
oD (mm)
AccessoryBreaking load
(kgs)
MFTBPTSM605 M5 2.5* 155 80 5.5 Ring 600
MFTBPTSM606 M6 3.0* 172 90 6.3 Ring 1,000
MFTBPTSM608 M8 4.0* 210 105 7.5 Ring 1,400
MFTBPTSM610 M10 5.0 246 125 9.1 Ring 2,200
MFTBPTSM612 M12 6.0 296 150 12.5 Ring 4,000
MFTBPTSM616 M16 8.0 386 190 16.1 Cotter pin 6,500
MFTBPTSM620 M20 10.0 422 210 17.8 Cotter pin 8,500
S3121/5 Technical Features• Wire sizes: 2.5mm - 10mm.
• Material: 316 Stainless Steel.
• Application: suited to membrane structures subject to dynamic forces.
• Swaging: hex swaged (by hand tool) for 2.5, 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.
ToGGlE/SWAGE TuRNBucKlES
EX-STocK SuBJEcT To PRIoR
SAlE
S3121/5 ToGGlE/SWAGE TuRNBucKlE
Hand tool for swaging 5.0mm wire available on request. NB: There may be a lead time.
96
codeSize M (mm)
Wire Ø (mm)
l (mm)
l1 (mm)
oD (mm)
AccessoryBreaking load
(KGS)
MFTBPJSMM605 M5 mini 3.0* 107 50 - Ring 750
MFTBPJSMM606 M6 mini 4.0* 133 60 - Ring 1,200
MFTBPJSM605 M5 2.5* 150 80 5.5 Ring 600
MFTBPJSM606 M6 3.0* 170 90 6.3 Ring 1,000
MFTBPJSM608 M8 4.0* 205 105 7.5 Ring 1,400
MFTBPJSM610 M10 5.0 240 125 9.1 Ring 2,200
MFTBPJSM612 M12 6.0 295 150 12.5 Ring 4,000
MFTBPJSM616 M16 8.0 370 190 16.1 Cotter pin 6,500
Safe working load - Standard safety factor for working load is 25% of Breaking Load
S3121P JAW/SWAGE TuRNBucKlE
L1
L
M
OD
OD
A jaw end is rigid and suited to `straight-line’ applications where the wire rig isn’t subject to significant external forces E.g. It is suited to flag poles, but not suited to shade sails.
S3121/5 Technical Features• Wire sizes: 2.5mm - 8mm.
• Material: 316 Stainless Steel.• Application: Suited to static applications
E.g. balustrades, staircases, flag poles and straight line installations.
• Swaging: hex swaged (by hand tool) for 2.5, 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.
Information used exclusively under permission of Strudyna Co. Ltd
S3121P WITH THREADED STuD INTo coNcRETESEE P.50 FoR DETAIlS
JAW/SWAGE TuRNBucKlES
Online catalogue: www.anzor.co.nz/wire-rigging
EX-STocK
SuBJEcT
To PRIoR SAlE
Hand tool for swaging 5.0mm wire available on request. NB: There may be a lead time.
97Online catalogue: www.anzor.co.nz/arch
S7805 - ToGGlE/SWAGE TERMINAl
Safe working load - Standard safety factor for working load is 25% of Breaking Load
S7803 - FoRK/SWAGE TERMINAl
codeWire Ø (mm)
A(mm)
B (mm)
D (mm)
F(mm)
l (mm)
AccessoryBreaking load
(KGS)
MFSWTT603 3.0 6 7 6.35 3.30 3.30 Ring 670
MFSWTT604 4.0 8 10 7.54 4.30 4.30 Ring 1,400
MFSWTT605 5.0 9 12 9.12 5.30 5.30 Ring 1,700
MFSWTT606 6.0 12 13 12.54 6.35 6.35 Ring 4,000
MFSWTT608 8.0 16 17 16.13 8.40 8.40 Cotter pin 7,000
MFSWTT610 10.0 19 20 17.85 10.50 10.50 Cotter pin 7,500
Safe working load - Standard safety factor for working load is 25% of Breaking Load
codeWire Ø (mm)
A(mm)
B (mm)
D (mm)
F(mm)
l (mm)
l1 (mm)
AccessoryBreaking load
(KGS)
MFSWFT4025 2.5 5.00 7.0 5.53 2.70 62.0 35 Ring 700
MFSWFT403 3.0 6.00 8.0 6.35 3.30 68.0 38 Ring 1,250
MFSWFT404 4.0 8.00 11.0 7.54 4.30 77.0 45 Ring 1,800
MFSWFT405 5.0 9.00 12.0 9.12 5.30 87.0 51 Ring 2,650
MFSWFT406 6.0 12.00 14.5 12.54 6.35 109.0 64 Ring 4,000
MFSWFT408 8.0 14.28 15.0 16.13 8.40 148.0 80 Cotter pin 6,500
A
L
L1
F
D
BA
AB
A
L
F
D
SWAGE TERMINAlS
Online catalogue: www.anzor.co.nz/wire-riggingInformation used exclusively under permission of Strudyna Co. Ltd
EX-STocK
SuBJEcT
To PRIoR SAlE
EX-STocK
SuBJEcT
To PRIoR SAlE
98
SWAGE STuD AT EAcH END
SWAGE STuD AT EAcH END
Pin-to-PinMiddle adjustment
Ø Wire
WireS7801 lH Swage Stud S7801 RH Swage Stud
Technical Features• A low cost, wire tensioning system, without the cost of a
turnbuckle. Hex nuts at each end perform the tensioning.
• Material: 316 Stainless Steel.
• Wire: Anzor 316 wire (p.105) or 316 Ultra wire (p.106)
• Application: Suited to static applications e.g. staircases and straight line installations.
• Swaging: hex swaged (by hand tool) for 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.
Hand tool for swaging 5.0mm wire available on request. NB: there may be a lead time.
codeWire Ø(mm)
Adjustment +/-
Thread M(mm)
l(mm)
l1(mm)
l2(mm)
oD(mm)
MFSWS4W03.0M05 3.0 80mm M5 80 32 40 6.3
MFSWS4W03M06 3.0 96mm M6 97 38 48 6.3
MFSWS4W04M06 4.0 96mm M6 110 45 48 7.5
MFSWS4W04M08 4.0 108mm M8 115 45 54 7.5
MFSWS4W05M10 5.0 122mm M10 128 52 61 9.1
MFSWS4W06M12 6.0 158mm M12 162 63 79 12.5
S7801 SWAGE STuD
L1 L2
MOD
L
ANzoR 316 1X19 WIRE
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Wire characteristics & breaking loads - please see p.105
Page 105
One hex nut is supplied per stud for tensioning the wire.
Adjust by tightening the hex nuts at each end.
Steel channel or similar - supplied by others.
Nylon isolating washer with a stainless washer (sold separately)and hex nut.
Tighten hex nut to tension wire.
INSTAllATIoN
Information used exclusively under permission of Strudyna Co. Ltd
Online catalogue: www.anzor.co.nz/wire-rigging
EX-STocK
SuBJEcT
To PRIoR SAlE
99Online catalogue: www.anzor.co.nz/arch
SWAGE FoRK TERMINAl + SWAGE STuD
Pin-to-PinMiddle adjustment
WireS7803 Fork Terminal S7801 Swage Stud
Ø Wire
SWAGE FoRK TERMINAl + STuD
Technical Features• Low cost, simple wire rigging system.
• Material: 316 Stainless Steel.
• Wire: Anzor 316 wire (p.105) or 316 Ultra wire (p.106)
• Application: Suited to static applications e.g. balustrades, staircases and straight line installations.
• Swaging: hex swaged (by hand tool) for 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.
Hand tool for swaging 5.0mm wire available on request. NB: there may be a lead time.
ANzoR 316 1X19 WIRE
Wire characteristics & breaking loads - see p.105
for dimensions & breaking loads.
S7803 FoRK TERMINAl
See p.97
See p.98 for installation details.
INSTAllATIoNTighten hex nut to tension wire.
Online catalogue: www.anzor.co.nz/wire-riggingInformation used exclusively under permission of Strudyna Co. Ltd
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Page 105
codeWire Ø(mm)
Adjustment +/-
Thread M(mm)
l(mm)
l1(mm)
l2(mm)
oD(mm)
MFSWS4W03.0M05 3.0 40mm M5 80 32 40 6.3
MFSWS4W03M06 3.0 48mm M6 97 38 48 6.3
MFSWS4W04M06 4.0 48mm M6 110 45 48 7.5
MFSWS4W04M08 4.0 57mm M8 115 45 54 7.5
MFSWS4W05M10 5.0 61mm M10 128 52 61 9.1
MFSWS4W06M12 6.0 79mm M12 162 63 79 12.5
S7801 RH SWAGE STuD
L1 L2
MOD
L
One hex nut is supplied per stud for tensioning the wire.
EX-STocK SuBJEcT To PRIoR
SAlE
100
RoD DYNAMIc SWAGE SYSTEM
RDS cABlE SYSTEMRDS ADJuSTABlE FoRK + PBI SWAGE STuD
RDS cable System Technical Features
• Attractive look as the threads are hidden.
• Made from passivated 316 Stainless Steel for enhanced
corrosion resistance.
• Installation: not for the faint of heart. Full cable must be
turned by two people, one at each end.
Recommended for advanced installers only.
• Wire: Anzor 316 Ultra wire - page 106.
We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.
locTITE 243
Pin-to-PinMiddle adjustment
WireRDS Fork (p.76) PBI Swage StudØ Wire
For full RDS Fork technical details, Breaking loads and coupling Plates - see p.79 - 84.
Fork + Stud Size Wire Ø(mm)
Wire type Adjustment+/-
MBl*(kN)
3/8” UNF 5.0 1x19 19mm 18
1/2” UNF 6.0 1x19 30mm 26
5/8” UNF 8.0 1x19 35mm 47
MAINTENANcE & clEANINGRegular maintenance and cleaning is required to maintain appearance.See p.21 for Anzor’s Cleaning & Maintenance Guide.
THREADS MuST BE luBRIcATED WITH NIcKEl ANTI SEIzETo PREVENT GAllING
Tension by turning both swage terminals simultaneously.
Information used exclusively under permission of Strudyna Co. Ltd
Online catalogue: www.anzor.co.nz/wire-rigging
ANzoR 316 ulTRA WIRE
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Wire characteristics & breaking loads - please see p.106
Page 106
EX-STocK
SuBJEcT
To PRIoR SAlE
*Minimum Breaking load (MBl) - after swaging minimum breaking load of cable assembly.
*For information on Safe Working Loads, go to p.105.
101Online catalogue: www.anzor.co.nz/wire-rigging
P2H ADJuSTER - ARcHITEcTuRAllY DESIGNED WIRE TENSIoNING SYSTEM
AVAIlABlE
To oRDER
Delivery approx
4 Months
P2H Adjuster Technical Features
• For cable diameter: 8mm – 42mm.
• Made from passivated 316 Stainless Steel for enhanced
corrosion resistance.
• Installation - special P2H tools required.
• Dynamic load bearing design with double end adjustment.
• Wire: HAMMA wire - page 107 & 108.
Copyright © 2011 Strudyna
• High quality tensioning unit for cable.
• Designed for performance and aesthetic appeal.
• Threads are hidden for enhanced aesthetic appeal.
• The double locking nut system offers good security to counter external dynamic and resonance forces.
• Due to the its unique internal adjustment system, the wire can be tensioned by turning just one end adjuster only, without turning the entire cable.
Information used exclusively under permission of Strudyna Co. Ltd
P2H ADJuSTER
Pin
P2H - Fork
Lock Nut for Ex-socket
Lock Nut forIn-Socket
Swage Terminal
Tension by turning the “In-Socket” only.
A “HIGH END” ARcHITEcTuRAllY DESIGNED FITTING
102
P2H ADJuSTER - technical information
P2H Precautions• Always select the correct cable based on the load requirement.
• Do not overload the cable above its designed Safe Working Load.
• Never use the P2H adjuster for lifting purposes.
• Cable assembly should not be tensioned while under load and should always be used in a straight line. Separate tensioning is required with hydraulic equipment. See our website or contact us for full installation procedures.
• Use nickel anti-seize to prevent the system galling.
Cable Length
P2H Adjuster P2H Adjuster
P2H ADJuSTER
MAINTENANcE & clEANINGRegular maintenance and cleaning is required to maintain appearance.See p.21 for Anzor’s Cleaning & Maintenance Guide.
For installation guide and toolsplease contact one of our architectural product managers
or visit www.anzor.co.nz/arch/p2h
We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.
locTITE 243
THREADS MuST BE luBRIcATED WITH NIcKEl ANTI SEIzE To PREVENT GAllING
cable Ø(mm)
Adjustment(+/-)
Min cable length
(mm)
l1 (mm)
Pin to Pin
8.0 40mm 836 182 1,200
10.0 40mm 964 218 1,400
12.0 40mm 1,164 218 1,600
14.0 56mm 1,372 264 1,900
16.0 56mm 1,572 264 2,100
19.0 60mm 1,872 314 2,500
20.0 60mm 1,972 314 2,600
Cable Length + (L1x2)
cable Ø(mm)
Adjustment(+/-)
Min cable length
(mm)
l1 (mm)
Pin to Pin
22.0 60mm 2,136 332 2,800
24.0 64mm 2,320 340 3,000
28.0 64mm 2,700 350 3,400
30.0 70mm 2,890 405 3,700
34.0 80mm 3,288 456 4,200
36.0 80mm 3,390 455 4,300
42.0 100mm 4,388 606 5,600
Cable Length + (L1x2)
Ø cable
L +
Figures described above are not under tension.
l1 l1
Information used exclusively under permission of Strudyna Co. Ltd
Online catalogue: www.anzor.co.nz/wire-rigging
103Online catalogue: www.anzor.co.nz/arch
P2H ADJuSTER - cable information
Pin-to-PinMiddle adjustment
Ø cable
P2H Adjuster P2H AdjustercableØD
A
ANzoR 316 ulTRA WIRE
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
HAMMA PRo-STRAND
Page 107
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
HAMMA MEGA-STRAND
Page 108
Wire Ø(mm)
A(mm)
Wire type
ØD(mm)
Min+/-
Min Breaking load* (kN)
8.0 18 1x19 16 40mm 47
10.0 20 1x19 20 40mm 74
12.0 20 1x19 22 40mm 106
14.0 21 1x19 24 56mm 145
16.0 24 1x19 27 56mm 180
19.0 30 1x19 33 60mm 267
P2H ADJuSTER
Online catalogue: www.anzor.co.nz/wire-riggingInformation used exclusively under permission of Strudyna Co. Ltd
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Page 106
*Minimum Breaking load (MBl) - after swaging minimum breaking load of cable assembly.
*Refer to p.105 for our guidelines on Safe Working loads.
cable Ø(mm)
A(mm)
Wire type
ØD(mm)
Min+/-
Min Breaking load* (kN)
8.0 18 1x19 16 40mm 57
10.0 20 1x19 20 40mm 90
12.0 20 1x19 22 40mm 127
14.0 21 1x25 24 56mm 170
16.0 24 1x25 27 56mm 225
19.0 30 1x25 33 60mm 282
cable Ø(mm)
A(mm)
Wire type
ØD(mm)
Min+/-
Min Breaking load* (kN)
20.0 30 1x37 33 60mm 279
22.0 34 1x37 42 60mm 341
24.0 34 1x37 42 64mm 410
28.0 40 1x37 45 64mm 561
30.0 40 1x61 52 70mm 695
34.0 48 1x61 56 80mm 849
36.0 48 1x61 56 80mm 870
42.0 56 1x61 60 100mm 1,008
104
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Page 105
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
-
Wide range of sizes and configurations.
Material : 316 Stainless Steel.Size : 1mm - 10mm.Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible).
- Economical pricing.Benefits
Application: Balustrades, shade sails, foliage trellises, and architectural rigging.
Code: MFW...
Material Test Certs available on request with order.
Maintenance: Wire rope must be cleaned & maintained regularly.
See our Maintenance & Cleaning guidelines on p.21.
ANzoR 316 WIRE
ANzoR 316 ulTRA WIRE
Page 106
WIRE TYPES
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
HAMMA PRo-STRAND
Page 107
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
HAMMA MEGA-STRAND
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Page 108
0.8
1x19
0.31
53
0.52
1.0
1x19
0.49
84
0.82
1.2
3/64”
1x19
0.71
121
1.19
1.5
1x19
1.11
189
1.85
1.6
1/16”
1x19
1.27
215
2.11
2
5/64”
1x19
1.98
336
3.3
2.4
3/32”
1x19
2.84
483
4.74
2.5
1x19
3.09
525
5.15
3
1x19
4.45
756
7.41
3.2
1/8”
1x19
5.06
861
8.44
3.5
1x19
6.06
1,030
10.1
4
5/32”
1x19
7.88
1,340
13.14
4.5
1x19
10.01
1,702
16.69
4.8
3/16”
1x19
11.39
1,935
18.98
5
1x19
12.39
2,100
20.59
6
1x19
3,030
29.71
5.5
7/32”
1x19
2,639
25.88
6.4
1/4”
1x19
3,442
33.75
7
1x19
4,120
40.4
7.2
9/32”
1x19
4,357
42.73
8
5/16”
1x19
5,380
52.76
9.6
3/8”
1x19
7,746
75.96
10
1x19
8,400
82.38
11.1
7/16”
1x19
10,574
103.7
12
1x19
12,102
118.68
12.7
1/2”
1x19
13,555
132.93
14
1x19
16,473
161.54
14.3
9/16”
1x19
17,186
168.54
16
5/8”
1x19
20,500
201.04
19
1x19
30,300
297.14
with Micro-stretch Technologies.
20
1x37
197.40
31,713
311
22
1x37
240.60
38,647
379
24.3
1x37
274.32
46,499
456
28
1x37
375.72
63,630
624
30
1x61
465.78
78,824
773
34
1x61
568.56
96,261
944
36
1x61
601.98
98,606
967
42
1x61
672.00
114,208
1,120
Extreme Condition Gear
Ultimate Structural cable
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad*
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension (kN)
min.BreakingLoad*
(Kgf)
(kN)
*ZR,D DIN 18800
Micro-stretch Technologies
14.0
1x25
113.586
19,300
189.27
12.0
1x19
84.73
14,400
141.22
2.0
5/64”
1x7
2.60
450
4.41
2.5
1x7
4.06
700
6.86
3.0
1x7
5.88
1,025
10.05
4.0
5/32”
1x7
10.47
1,795
17.60
5.0
1x19
14.36
2,600
25.50
6.0
1x19
20.89
3,700
36.28
7.0
1x19
28.89
5,100
50.01
8.0
5/16”
1x19
36.19
6,500
63.74
9.0
3/8”
1x19
46.48
9,000
88.26
10.0
7/16”
1x19
57.49
10,250
100.52
11.0
1x19
71.20
13,500
132.39
16.0
1x25
150.63
25,600
251.05
19.0
1x25
188.29
32,000
313.81
1x7
0.8
1x19
0.31
53
0.52
1.0
1x19
0.49
84
0.82
1.2
3/64”
1x19
0.71
121
1.19
1.5
1x19
1.11
189
1.85
1.6
1/16”
1x19
1.27
215
2.11
2
5/64”
1x19
1.98
336
3.3
2.4
3/32”
1x19
2.84
483
4.74
2.5
1x19
3.09
525
5.15
3
1x19
4.45
756
7.41
3.2
1/8”
1x19
5.06
861
8.44
3.5
1x19
6.06
1,030
10.1
4
5/32”
1x19
7.88
1,340
13.14
4.5
1x19
10.01
1,702
16.69
4.8
3/16”
1x19
11.39
1,935
18.98
5
1x19
12.39
2,100
20.59
6
1x19
3,030
29.71
5.5
7/32”
1x19
2,639
25.88
6.4
1/4”
1x19
3,442
33.75
7
1x19
4,120
40.4
7.2
9/32”
1x19
4,357
42.73
8
5/16”
1x19
5,380
52.76
9.6
3/8”
1x19
7,746
75.96
10
1x19
8,400
82.38
11.1
7/16”
1x19
10,574
103.7
12
1x19
12,102
118.68
12.7
1/2”
1x19
13,555
132.93
14
1x19
16,473
161.54
14.3
9/16”
1x19
17,186
168.54
16
5/8”
1x19
20,500
201.04
19
1x19
30,300
297.14
with Micro-stretch Technologies.
20
1x37
197.40
31,713
311
22
1x37
240.60
38,647
379
24.3
1x37
274.32
46,499
456
28
1x37
375.72
63,630
624
30
1x61
465.78
78,824
773
34
1x61
568.56
96,261
944
36
1x61
601.98
98,606
967
42
1x61
672.00
114,208
1,120
Extreme Condition Gear
Ultimate Structural cable
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad*
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension (kN)
min.BreakingLoad*
(Kgf)
(kN)
*ZR,D DIN 18800
Micro-stretch Technologies
14.0
1x25
113.586
19,300
189.27
12.0
1x19
84.73
14,400
141.22
2.0
5/64”
1x7
2.60
450
4.41
2.5
1x7
4.06
700
6.86
3.0
1x7
5.88
1,025
10.05
4.0
5/32”
1x7
10.47
1,795
17.60
5.0
1x19
14.36
2,600
25.50
6.0
1x19
20.89
3,700
36.28
7.0
1x19
28.89
5,100
50.01
8.0
5/16”
1x19
36.19
6,500
63.74
9.0
3/8”
1x19
46.48
9,000
88.26
10.0
7/16”
1x19
57.49
10,250
100.52
11.0
1x19
71.20
13,500
132.39
16.0
1x25
150.63
25,600
251.05
19.0
1x25
188.29
32,000
313.81
1x19 1x25
0.8
1x19
0.31
53
0.52
1.0
1x19
0.49
84
0.82
1.2
3/64”
1x19
0.71
121
1.19
1.5
1x19
1.11
189
1.85
1.6
1/16”
1x19
1.27
215
2.11
2
5/64”
1x19
1.98
336
3.3
2.4
3/32”
1x19
2.84
483
4.74
2.5
1x19
3.09
525
5.15
3
1x19
4.45
756
7.41
3.2
1/8”
1x19
5.06
861
8.44
3.5
1x19
6.06
1,030
10.1
4
5/32”
1x19
7.88
1,340
13.14
4.5
1x19
10.01
1,702
16.69
4.8
3/16”
1x19
11.39
1,935
18.98
5
1x19
12.39
2,100
20.59
6
1x19
3,030
29.71
5.5
7/32”
1x19
2,639
25.88
6.4
1/4”
1x19
3,442
33.75
7
1x19
4,120
40.4
7.2
9/32”
1x19
4,357
42.73
8
5/16”
1x19
5,380
52.76
9.6
3/8”
1x19
7,746
75.96
10
1x19
8,400
82.38
11.1
7/16”
1x19
10,574
103.7
12
1x19
12,102
118.68
12.7
1/2”
1x19
13,555
132.93
14
1x19
16,473
161.54
14.3
9/16”
1x19
17,186
168.54
16
5/8”
1x19
20,500
201.04
19
1x19
30,300
297.14
with Micro-stretch Technologies.
20
1x37
197.40
31,713
311
22
1x37
240.60
38,647
379
24.3
1x37
274.32
46,499
456
28
1x37
375.72
63,630
624
30
1x61
465.78
78,824
773
34
1x61
568.56
96,261
944
36
1x61
601.98
98,606
967
42
1x61
672.00
114,208
1,120
Extreme Condition Gear
Ultimate Structural cable
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad*
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension (kN)
min.BreakingLoad*
(Kgf)
(kN)
*ZR,D DIN 18800
Micro-stretch Technologies
14.0
1x25
113.586
19,300
189.27
12.0
1x19
84.73
14,400
141.22
2.0
5/64”
1x7
2.60
450
4.41
2.5
1x7
4.06
700
6.86
3.0
1x7
5.88
1,025
10.05
4.0
5/32”
1x7
10.47
1,795
17.60
5.0
1x19
14.36
2,600
25.50
6.0
1x19
20.89
3,700
36.28
7.0
1x19
28.89
5,100
50.01
8.0
5/16”
1x19
36.19
6,500
63.74
9.0
3/8”
1x19
46.48
9,000
88.26
10.0
7/16”
1x19
57.49
10,250
100.52
11.0
1x19
71.20
13,500
132.39
16.0
1x25
150.63
25,600
251.05
19.0
1x25
188.29
32,000
313.81
WIRE TYPES
Online catalogue: www.anzor.co.nz/wire
105Online catalogue: www.anzor.co.nz/arch
ANzoR 316 WIRE
Anzor 316 - Wire
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Wire Rope SizeBreaking
loadcharacteristics
2.0 mm2.5 mm3.0 mm 4.0 mm 5.0 mm 6.0 mm 8.0 mm
340 kg500 kg720 kg
1,285 kg 2,000kg2,876 kg 4,640 kg
- Rigid, non-flexible, low stretch - ideal in straight lines.
- Higher comparative breaking strain.
- Fewer crevices, traps less dirt, therefore less likely to `tea-stain’.
- Commonly used with swage fittings.
1.0 mm1.5 mm2.0 mm2.5 mm
60 kg122 kg235 kg428 kg
- Semi-flexible.
- Low-medium stretch.
- Medium breaking strain.
- Can be terminated with crimps, or can also be swaged.
2.0 mm2.5 mm3.0 mm 4.0 mm 5.0 mm 6.0 mm 8.0 mm
10.0 mm
230 kg380 kg540 kg 950 kg
1,490 kg 1,910 kg3,400 kg5,310 kg
- Very flexible.
- Medium stretch.
- Medium-low breaking strain.
- Can be terminated with crimps, or can also be swaged.
- More crevices so higher risk of to tea-staining.
- Hardest to clean.
1x19
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
-
Wide range of sizes and configurations.
Material : 316 Stainless Steel.Size : 1mm - 10mm.Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible).
- Economical pricing.Benefits
Application: Balustrades, shade sails, foliage trellises, and architectural rigging.
Code: MFW...
Material Test Certs available on request with order.
Maintenance: Wire rope must be cleaned & maintained regularly.
See our Maintenance & Cleaning guidelines on p.21.
1x19 7x7 7x19
1x19 7x7 7x19
Safe Working load - to determine the safe working load of a wire rope or cable, the nominal strength or Minimum Breaking Load (MBL) must be reduced by a safety factor. The MBL of a wire rope should be considered the straight line pull which will actually break the wire. The nominal strength or MBL of a wire rope should never be used as its working load.
The safety factor is the ratio of strength of the rope or strand to the working load required. It is impossible toestablish a uniform safety factor as it will depend upon the type of work performed, government regulations,loads applied, speed of operation, length of wire rope used, etc. As a guideline, designers/installers commonly use a the Safe Working Load of 25% of Breaking Load, allowing for a 4:1 safety factor.
It is the customer’s responsibility to ensure that an appropriate safety factor has been applied to the MBL to calculate the safe working load of the wire rope being specified or ordered. We suggest that you engage a consulting engineer to assist you. Anzor takes no responsibility for the final decision, and accepts no liability in the case where loss arises from the safety factor chosen.
Cleaning & Maintenance
is required.See p.21
ANzoR 316 WIRE RoPE
EX-STocK
SuBJEcT
To PRIoR SAlE
106
Wire RopeSize *Breaking
load (Kg)
0.8 mm1.0 mm1.5 mm2.0 mm2.5 mm3.0 mm 3.5 mm4.0 mm 4.5 mm5.0 mm 6.0 mm 7.0 mm8.0 mm10.0 mm12.0 mm14.0 mm16.0 mm19.0 mm
5384
189336525756
1,0301,3401,7022,1003,0304,1205,3808,400
12,10216,47320,50030,300
0.8 mm1.0 mm1.5 mm2.0 mm2.5 mm3.0 mm 3.5 mm4.0 mm 4.5 mm
3859
145258374581 733
1,030 1,312
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
ANzoR 316 ulTRA WIRE
HIGHlIGHTED SIzES IN STocK.
oTHERS AVAIlABlE
oN REQuEST.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Anzor 316 - ultra Wire
7x7
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Higher corrosion resistance than standard 316 wire, due to the wire undergoing additional treatments.
refer to p92 for characteristics
Wire RopeSize *Breaking
load (Kg)
5.0 mm 6.0 mm 7.0 mm8.0 mm10.0 mm12.0 mm14.0 mm16.0 mm18.0 mm
1,620 2,320 3,160 3,670 5,750 8,270
11,200 14,700 21,000
1.0 mm1.5 mm2.0 mm2.5 mm3.0 mm 3.5 mm4.0 mm 4.5 mm5.0 mm 6.0 mm 7.0 mm8.0 mm10.0 mm12.0 mm14.0 mm16.0 mm18.0 mm20.0 mm
59 134239373538731956
1,206 1,490 2,150 2,930 3,400 5,310 7,650
10,400 13,600 19,30023,900
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
*Refer to p.105 for our guidelines on Safe Working loads.
Cleaning &
Maintenance
is required.
See p.21
ANzoR 316 ulTRA WIRE RoPE
Online catalogue: www.anzor.co.nz/wire
107Online catalogue: www.anzor.co.nz/wire
0.8
1x19
0.31
53
0.52
1.0
1x19
0.49
84
0.82
1.2
3/64”
1x19
0.71
121
1.19
1.5
1x19
1.11
189
1.85
1.6
1/16”
1x19
1.27
215
2.11
2
5/64”
1x19
1.98
336
3.3
2.4
3/32”
1x19
2.84
483
4.74
2.5
1x19
3.09
525
5.15
3
1x19
4.45
756
7.41
3.2
1/8”
1x19
5.06
861
8.44
3.5
1x19
6.06
1,030
10.1
4
5/32”
1x19
7.88
1,340
13.14
4.5
1x19
10.01
1,702
16.69
4.8
3/16”
1x19
11.39
1,935
18.98
5
1x19
12.39
2,100
20.59
6
1x19
3,030
29.71
5.5
7/32”
1x19
2,639
25.88
6.4
1/4”
1x19
3,442
33.75
7
1x19
4,120
40.4
7.2
9/32”
1x19
4,357
42.73
8
5/16”
1x19
5,380
52.76
9.6
3/8”
1x19
7,746
75.96
10
1x19
8,400
82.38
11.1
7/16”
1x19
10,574
103.7
12
1x19
12,102
118.68
12.7
1/2”
1x19
13,555
132.93
14
1x19
16,473
161.54
14.3
9/16”
1x19
17,186
168.54
16
5/8”
1x19
20,500
201.04
19
1x19
30,300
297.14
with Micro-stretch Technologies.
20
1x37
197.40
31,713
311
22
1x37
240.60
38,647
379
24.3
1x37
274.32
46,499
456
28
1x37
375.72
63,630
624
30
1x61
465.78
78,824
773
34
1x61
568.56
96,261
944
36
1x61
601.98
98,606
967
42
1x61
672.00
114,208
1,120
Extreme Condition Gear
Ultimate Structural cable
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad*
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension (kN)
min.BreakingLoad*
(Kgf)
(kN)
*ZR,D DIN 18800
Micro-stretch Technologies
14.0
1x25
113.586
19,300
189.27
12.0
1x19
84.73
14,400
141.22
2.0
5/64”
1x7
2.60
450
4.41
2.5
1x7
4.06
700
6.86
3.0
1x7
5.88
1,025
10.05
4.0
5/32”
1x7
10.47
1,795
17.60
5.0
1x19
14.36
2,600
25.50
6.0
1x19
20.89
3,700
36.28
7.0
1x19
28.89
5,100
50.01
8.0
5/16”
1x19
36.19
6,500
63.74
9.0
3/8”
1x19
46.48
9,000
88.26
10.0
7/16”
1x19
57.49
10,250
100.52
11.0
1x19
71.20
13,500
132.39
16.0
1x25
150.63
25,600
251.05
19.0
1x25
188.29
32,000
313.81
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
Copyright © 2011 Strudyna Information used exclusively under permission of Strudyna Co. Ltd
AVAIlABlE To oRDER
Delivery approx 4 Weeks
0.8
1x19
0.31
53
0.52
1.0
1x19
0.49
84
0.82
1.2
3/64”
1x19
0.71
121
1.19
1.5
1x19
1.11
189
1.85
1.6
1/16”
1x19
1.27
215
2.11
2
5/64”
1x19
1.98
336
3.3
2.4
3/32”
1x19
2.84
483
4.74
2.5
1x19
3.09
525
5.15
3
1x19
4.45
756
7.41
3.2
1/8”
1x19
5.06
861
8.44
3.5
1x19
6.06
1,030
10.1
4
5/32”
1x19
7.88
1,340
13.14
4.5
1x19
10.01
1,702
16.69
4.8
3/16”
1x19
11.39
1,935
18.98
5
1x19
12.39
2,100
20.59
6
1x19
3,030
29.71
5.5
7/32”
1x19
2,639
25.88
6.4
1/4”
1x19
3,442
33.75
7
1x19
4,120
40.4
7.2
9/32”
1x19
4,357
42.73
8
5/16”
1x19
5,380
52.76
9.6
3/8”
1x19
7,746
75.96
10
1x19
8,400
82.38
11.1
7/16”
1x19
10,574
103.7
12
1x19
12,102
118.68
12.7
1/2”
1x19
13,555
132.93
14
1x19
16,473
161.54
14.3
9/16”
1x19
17,186
168.54
16
5/8”
1x19
20,500
201.04
19
1x19
30,300
297.14
with Micro-stretch Technologies.
20
1x37
197.40
31,713
311
22
1x37
240.60
38,647
379
24.3
1x37
274.32
46,499
456
28
1x37
375.72
63,630
624
30
1x61
465.78
78,824
773
34
1x61
568.56
96,261
944
36
1x61
601.98
98,606
967
42
1x61
672.00
114,208
1,120
Extreme Condition Gear
Ultimate Structural cable
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad*
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension (kN)
min.BreakingLoad*
(Kgf)
(kN)
*ZR,D DIN 18800
Micro-stretch Technologies
14.0
1x25
113.586
19,300
189.27
12.0
1x19
84.73
14,400
141.22
2.0
5/64”
1x7
2.60
450
4.41
2.5
1x7
4.06
700
6.86
3.0
1x7
5.88
1,025
10.05
4.0
5/32”
1x7
10.47
1,795
17.60
5.0
1x19
14.36
2,600
25.50
6.0
1x19
20.89
3,700
36.28
7.0
1x19
28.89
5,100
50.01
8.0
5/16”
1x19
36.19
6,500
63.74
9.0
3/8”
1x19
46.48
9,000
88.26
10.0
7/16”
1x19
57.49
10,250
100.52
11.0
1x19
71.20
13,500
132.39
16.0
1x25
150.63
25,600
251.05
19.0
1x25
188.29
32,000
313.81
1x7
0.8
1x19
0.31
53
0.52
1.0
1x19
0.49
84
0.82
1.2
3/64”
1x19
0.71
121
1.19
1.5
1x19
1.11
189
1.85
1.6
1/16”
1x19
1.27
215
2.11
2
5/64”
1x19
1.98
336
3.3
2.4
3/32”
1x19
2.84
483
4.74
2.5
1x19
3.09
525
5.15
3
1x19
4.45
756
7.41
3.2
1/8”
1x19
5.06
861
8.44
3.5
1x19
6.06
1,030
10.1
4
5/32”
1x19
7.88
1,340
13.14
4.5
1x19
10.01
1,702
16.69
4.8
3/16”
1x19
11.39
1,935
18.98
5
1x19
12.39
2,100
20.59
6
1x19
3,030
29.71
5.5
7/32”
1x19
2,639
25.88
6.4
1/4”
1x19
3,442
33.75
7
1x19
4,120
40.4
7.2
9/32”
1x19
4,357
42.73
8
5/16”
1x19
5,380
52.76
9.6
3/8”
1x19
7,746
75.96
10
1x19
8,400
82.38
11.1
7/16”
1x19
10,574
103.7
12
1x19
12,102
118.68
12.7
1/2”
1x19
13,555
132.93
14
1x19
16,473
161.54
14.3
9/16”
1x19
17,186
168.54
16
5/8”
1x19
20,500
201.04
19
1x19
30,300
297.14
with Micro-stretch Technologies.
20
1x37
197.40
31,713
311
22
1x37
240.60
38,647
379
24.3
1x37
274.32
46,499
456
28
1x37
375.72
63,630
624
30
1x61
465.78
78,824
773
34
1x61
568.56
96,261
944
36
1x61
601.98
98,606
967
42
1x61
672.00
114,208
1,120
Extreme Condition Gear
Ultimate Structural cable
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad*
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension (kN)
min.BreakingLoad*
(Kgf)
(kN)
*ZR,D DIN 18800
Micro-stretch Technologies
14.0
1x25
113.586
19,300
189.27
12.0
1x19
84.73
14,400
141.22
2.0
5/64”
1x7
2.60
450
4.41
2.5
1x7
4.06
700
6.86
3.0
1x7
5.88
1,025
10.05
4.0
5/32”
1x7
10.47
1,795
17.60
5.0
1x19
14.36
2,600
25.50
6.0
1x19
20.89
3,700
36.28
7.0
1x19
28.89
5,100
50.01
8.0
5/16”
1x19
36.19
6,500
63.74
9.0
3/8”
1x19
46.48
9,000
88.26
10.0
7/16”
1x19
57.49
10,250
100.52
11.0
1x19
71.20
13,500
132.39
16.0
1x25
150.63
25,600
251.05
19.0
1x25
188.29
32,000
313.81
1x19 1x25
0.8
1x19
0.31
53
0.52
1.0
1x19
0.49
84
0.82
1.2
3/64”
1x19
0.71
121
1.19
1.5
1x19
1.11
189
1.85
1.6
1/16”
1x19
1.27
215
2.11
2
5/64”
1x19
1.98
336
3.3
2.4
3/32”
1x19
2.84
483
4.74
2.5
1x19
3.09
525
5.15
3
1x19
4.45
756
7.41
3.2
1/8”
1x19
5.06
861
8.44
3.5
1x19
6.06
1,030
10.1
4
5/32”
1x19
7.88
1,340
13.14
4.5
1x19
10.01
1,702
16.69
4.8
3/16”
1x19
11.39
1,935
18.98
5
1x19
12.39
2,100
20.59
6
1x19
3,030
29.71
5.5
7/32”
1x19
2,639
25.88
6.4
1/4”
1x19
3,442
33.75
7
1x19
4,120
40.4
7.2
9/32”
1x19
4,357
42.73
8
5/16”
1x19
5,380
52.76
9.6
3/8”
1x19
7,746
75.96
10
1x19
8,400
82.38
11.1
7/16”
1x19
10,574
103.7
12
1x19
12,102
118.68
12.7
1/2”
1x19
13,555
132.93
14
1x19
16,473
161.54
14.3
9/16”
1x19
17,186
168.54
16
5/8”
1x19
20,500
201.04
19
1x19
30,300
297.14
with Micro-stretch Technologies.
20
1x37
197.40
31,713
311
22
1x37
240.60
38,647
379
24.3
1x37
274.32
46,499
456
28
1x37
375.72
63,630
624
30
1x61
465.78
78,824
773
34
1x61
568.56
96,261
944
36
1x61
601.98
98,606
967
42
1x61
672.00
114,208
1,120
Extreme Condition Gear
Ultimate Structural cable
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad*
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension (kN)
min.BreakingLoad*
(Kgf)
(kN)
*ZR,D DIN 18800
Micro-stretch Technologies
14.0
1x25
113.586
19,300
189.27
12.0
1x19
84.73
14,400
141.22
2.0
5/64”
1x7
2.60
450
4.41
2.5
1x7
4.06
700
6.86
3.0
1x7
5.88
1,025
10.05
4.0
5/32”
1x7
10.47
1,795
17.60
5.0
1x19
14.36
2,600
25.50
6.0
1x19
20.89
3,700
36.28
7.0
1x19
28.89
5,100
50.01
8.0
5/16”
1x19
36.19
6,500
63.74
9.0
3/8”
1x19
46.48
9,000
88.26
10.0
7/16”
1x19
57.49
10,250
100.52
11.0
1x19
71.20
13,500
132.39
16.0
1x25
150.63
25,600
251.05
19.0
1x25
188.29
32,000
313.81
HAMMA PRo-STRAND
HAMMA 316 HIGH TENSIlE cABlE
0.8
1x19
0.31
53
0.52
1.0
1x19
0.49
84
0.82
1.2
3/64”
1x19
0.71
121
1.19
1.5
1x19
1.11
189
1.85
1.6
1/16”
1x19
1.27
215
2.11
2
5/64”
1x19
1.98
336
3.3
2.4
3/32”
1x19
2.84
483
4.74
2.5
1x19
3.09
525
5.15
3
1x19
4.45
756
7.41
3.2
1/8”
1x19
5.06
861
8.44
3.5
1x19
6.06
1,030
10.1
4
5/32”
1x19
7.88
1,340
13.14
4.5
1x19
10.01
1,702
16.69
4.8
3/16”
1x19
11.39
1,935
18.98
5
1x19
12.39
2,100
20.59
6
1x19
3,030
29.71
5.5
7/32”
1x19
2,639
25.88
6.4
1/4”
1x19
3,442
33.75
7
1x19
4,120
40.4
7.2
9/32”
1x19
4,357
42.73
8
5/16”
1x19
5,380
52.76
9.6
3/8”
1x19
7,746
75.96
10
1x19
8,400
82.38
11.1
7/16”
1x19
10,574
103.7
12
1x19
12,102
118.68
12.7
1/2”
1x19
13,555
132.93
14
1x19
16,473
161.54
14.3
9/16”
1x19
17,186
168.54
16
5/8”
1x19
20,500
201.04
19
1x19
30,300
297.14
with Micro-stretch Technologies.
20
1x37
197.40
31,713
311
22
1x37
240.60
38,647
379
24.3
1x37
274.32
46,499
456
28
1x37
375.72
63,630
624
30
1x61
465.78
78,824
773
34
1x61
568.56
96,261
944
36
1x61
601.98
98,606
967
42
1x61
672.00
114,208
1,120
Extreme Condition Gear
Ultimate Structural cable
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad*
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension (kN)
min.BreakingLoad*
(Kgf)
(kN)
*ZR,D DIN 18800
Micro-stretch Technologies
14.0
1x25
113.586
19,300
189.27
12.0
1x19
84.73
14,400
141.22
2.0
5/64”
1x7
2.60
450
4.41
2.5
1x7
4.06
700
6.86
3.0
1x7
5.88
1,025
10.05
4.0
5/32”
1x7
10.47
1,795
17.60
5.0
1x19
14.36
2,600
25.50
6.0
1x19
20.89
3,700
36.28
7.0
1x19
28.89
5,100
50.01
8.0
5/16”
1x19
36.19
6,500
63.74
9.0
3/8”
1x19
46.48
9,000
88.26
10.0
7/16”
1x19
57.49
10,250
100.52
11.0
1x19
71.20
13,500
132.39
16.0
1x25
150.63
25,600
251.05
19.0
1x25
188.29
32,000
313.81
*For information on Safe Working Loads, go to p.105.
108Online catalogue: www.anzor.co.nz/wire-rigging
0.8
1x19
0.31
53
0.52
1.0
1x19
0.49
84
0.82
1.2
3/64”
1x19
0.71
121
1.19
1.5
1x19
1.11
189
1.85
1.6
1/16”
1x19
1.27
215
2.11
2
5/64”
1x19
1.98
336
3.3
2.4
3/32”
1x19
2.84
483
4.74
2.5
1x19
3.09
525
5.15
3
1x19
4.45
756
7.41
3.2
1/8”
1x19
5.06
861
8.44
3.5
1x19
6.06
1,030
10.1
4
5/32”
1x19
7.88
1,340
13.14
4.5
1x19
10.01
1,702
16.69
4.8
3/16”
1x19
11.39
1,935
18.98
5
1x19
12.39
2,100
20.59
6
1x19
3,030
29.71
5.5
7/32”
1x19
2,639
25.88
6.4
1/4”
1x19
3,442
33.75
7
1x19
4,120
40.4
7.2
9/32”
1x19
4,357
42.73
8
5/16”
1x19
5,380
52.76
9.6
3/8”
1x19
7,746
75.96
10
1x19
8,400
82.38
11.1
7/16”
1x19
10,574
103.7
12
1x19
12,102
118.68
12.7
1/2”
1x19
13,555
132.93
14
1x19
16,473
161.54
14.3
9/16”
1x19
17,186
168.54
16
5/8”
1x19
20,500
201.04
19
1x19
30,300
297.14
with Micro-stretch Technologies.
20
1x37
197.40
31,713
311
22
1x37
240.60
38,647
379
24.3
1x37
274.32
46,499
456
28
1x37
375.72
63,630
624
30
1x61
465.78
78,824
773
34
1x61
568.56
96,261
944
36
1x61
601.98
98,606
967
42
1x61
672.00
114,208
1,120
Extreme Condition Gear
Ultimate Structural cable
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad*
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension (kN)
min.BreakingLoad*
(Kgf)
(kN)
*ZR,D DIN 18800
Micro-stretch Technologies
14.0
1x25
113.586
19,300
189.27
12.0
1x19
84.73
14,400
141.22
2.0
5/64”
1x7
2.60
450
4.41
2.5
1x7
4.06
700
6.86
3.0
1x7
5.88
1,025
10.05
4.0
5/32”
1x7
10.47
1,795
17.60
5.0
1x19
14.36
2,600
25.50
6.0
1x19
20.89
3,700
36.28
7.0
1x19
28.89
5,100
50.01
8.0
5/16”
1x19
36.19
6,500
63.74
9.0
3/8”
1x19
46.48
9,000
88.26
10.0
7/16”
1x19
57.49
10,250
100.52
11.0
1x19
71.20
13,500
132.39
16.0
1x25
150.63
25,600
251.05
19.0
1x25
188.29
32,000
313.81
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
HAMMA MEGA-STRAND
High tensile rods systems
Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.
Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.
HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest
stainless steel strand on the market.
Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.
Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.
HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.
Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.
Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)
HAMMA PRO-STRAND
Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.
Material
: :
316 Stainless SteelSizes :
Types Compact wire strand in constructions 1x7, 1x19, 1x25
1.6mm - 12mmFinish
:
Bright and smooth for increased corrosion resistance.
Application: Predominantly used for structural cables, e.g glass facades
Specific features: - Extremely non-flexible.
- High breaking strain.
- Smooth clean finish.
- No pre-stress required.
- Extremely low stretch.
1x19 7x7 7x19
1x19
1x37 1x61
with Micro-stretch Technologies.
1x7
with Ultimate Structural cable
Application: Large structural projects, such as bridges.
Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.
Types : A conventional 1x37 and 1x61 construction wire stand.
Code: MFW...U
Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.
HAMMA 316 HIGH TENSIlE cABlE
Copyright © 2011 StrudynaInformation used exclusively under permission of Strudyna Co. Ltd
AVAIlABlE To oRDER
Delivery approx 4 Weeks
0.8
1x19
0.31
53
0.52
1.0
1x19
0.49
84
0.82
1.2
3/64”
1x19
0.71
121
1.19
1.5
1x19
1.11
189
1.85
1.6
1/16”
1x19
1.27
215
2.11
2
5/64”
1x19
1.98
336
3.3
2.4
3/32”
1x19
2.84
483
4.74
2.5
1x19
3.09
525
5.15
3
1x19
4.45
756
7.41
3.2
1/8”
1x19
5.06
861
8.44
3.5
1x19
6.06
1,030
10.1
4
5/32”
1x19
7.88
1,340
13.14
4.5
1x19
10.01
1,702
16.69
4.8
3/16”
1x19
11.39
1,935
18.98
5
1x19
12.39
2,100
20.59
6
1x19
3,030
29.71
5.5
7/32”
1x19
2,639
25.88
6.4
1/4”
1x19
3,442
33.75
7
1x19
4,120
40.4
7.2
9/32”
1x19
4,357
42.73
8
5/16”
1x19
5,380
52.76
9.6
3/8”
1x19
7,746
75.96
10
1x19
8,400
82.38
11.1
7/16”
1x19
10,574
103.7
12
1x19
12,102
118.68
12.7
1/2”
1x19
13,555
132.93
14
1x19
16,473
161.54
14.3
9/16”
1x19
17,186
168.54
16
5/8”
1x19
20,500
201.04
19
1x19
30,300
297.14
with Micro-stretch Technologies.
20
1x37
197.40
31,713
311
22
1x37
240.60
38,647
379
24.3
1x37
274.32
46,499
456
28
1x37
375.72
63,630
624
30
1x61
465.78
78,824
773
34
1x61
568.56
96,261
944
36
1x61
601.98
98,606
967
42
1x61
672.00
114,208
1,120
Extreme Condition Gear
Ultimate Structural cable
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad*
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension* (kN)
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
min.BreakingLoad
(Kgf)
(kN)
METRIC
INCH
Construction
Limit Tension (kN)
min.BreakingLoad*
(Kgf)
(kN)
*ZR,D DIN 18800
Micro-stretch Technologies
14.0
1x25
113.586
19,300
189.27
12.0
1x19
84.73
14,400
141.22
2.0
5/64”
1x7
2.60
450
4.41
2.5
1x7
4.06
700
6.86
3.0
1x7
5.88
1,025
10.05
4.0
5/32”
1x7
10.47
1,795
17.60
5.0
1x19
14.36
2,600
25.50
6.0
1x19
20.89
3,700
36.28
7.0
1x19
28.89
5,100
50.01
8.0
5/16”
1x19
36.19
6,500
63.74
9.0
3/8”
1x19
46.48
9,000
88.26
10.0
7/16”
1x19
57.49
10,250
100.52
11.0
1x19
71.20
13,500
132.39
16.0
1x25
150.63
25,600
251.05
19.0
1x25
188.29
32,000
313.81
*For information on Safe Working Loads, go to p.105.