Wireless Configuration: Samsung Galaxy

1. On your mobile click on application.

2. Click on settings.

3. Then you need click on Wireless and Network.

4. Click on Wi-Fi Settings.

5. Double Click on Ritaj Network.

6. You need to change Phase 2 authentication to --- (See the

next image).

7. Select (MSCHAP).

8. Fill out the following information (student number and Ritaj

password). After that click Connect.

9. It should be connected to Ritaj.

10. You need to configure proxy on your Samsung Galaxy,

So click on Advance settings.

11. You need to change these settings according to the

image on the following page.

12. Click proxy and type what is in the next page.

13. Fill out the required information, and click ok.

14. Click on Port, and fill the information according to

whats shown in the next page.

15. Fill out the port number to 3128.

16. Finally it should be connected to the network; you may

now use the default browser for Samsung galaxy to get

internet access on your mobile.

GOODLUCK