WISP Mode with ONT Support 2.4 GHz. only

EDIMAX Can broadcast 2.4 GHz and 5GHz SSID 1. Launch browser and go to 192.168.1.2

2. Click Get Started

3. Click Change to a Different mode

4. Click WISP then click Next

5. Click Get Started

6. Select Configure manually then click Next

7. Select Enable 2.4 GHz then click Next

8. Select SSID which user want to connect. If SSID does not show in the list, click refresh 9. If user want to connect with Hide SSID, click Setup extender manually 10. Click Next

11. Define Password in the blank of Security Key then click Next

12. Click Next

13. Click Next

14. Select Dynamic IP then click Next

15. Set Host name and select Obtain automatically then click Next

16. Click Next

17. Set username and password for both Wi-Fi 2.4 GHz and Wi-Fi 5 GHz

18. Click Next

19. The setting success

20. Launch browser and go to http:// 192.168.1.2/index.asp

21. Enter Username: admin and Password: aisadmin then click Login

22. After Login, it will display Setup page

23. Select WISP -> WAN Setup 24. Click on Click here to Restart then click Save setting