Post on 24-Sep-2020
transcript
april 2015
edition
Wood stoves
IMPORTANT RECOMMENDATIONS Stoves give off a large amount of heat. The installation should be carried out in accordance with good professional practice particularly as regards insulation and the distances to be observed during the assembly relatively to in ammable materials. The liability of the manufacturer is limited to the speci c guarantee on the various supplied parts ma ing up the stoves. There is good reason to comply with our recommendations delivered with each appliance. The stoves comply with the European norm EN 13240.
Document not contractual. There might be variations of shades due to the photos and the printing.n order to improve its products the manufacturer is entitled to bring any necesary modi ations.
DTP by Seguin Duteriez / 03/2015
3
summaryStoves with closed air circulation ................................... 3
Emeraude 1/2/3/4 .......................................................4-7
Aurore ..........................................................................8-9
Integral ...................................................................10-11
Kubic .......................................................................12-13
I700P .......................................................................14-15
I800P .......................................................................16-17
I1000P -I1000P DF ..................................................18-19
Waxed concrete basement .....................................20-21
Ambre .....................................................................18-19
Jade .........................................................................24-29
Topaze .....................................................................30-31
Saphir ......................................................................32-33
Onyx .......................................................................34-35
Opale .......................................................................36-37
ACS Technology (Advanced Combustion System) ..... 38
Ventilation kit option / Pipe cover option ...................... 39
No fire without oxygen. The good performance of wood burning stoves is guaranteed with a fresh
air inlet allowing enough oxygen supply needed for the combustion and preventing depression in
the room.
In order to answer to the new requirements of low energy consumption houses, Seguin is offering
the possibilty to operate the stoves without taking the ambient air of the room during the combustion
process.
The stoves directly take the fresh air, thanks to a pipe connected to the
outside or a double-flow pipe.
Then the stoves function with a closed air circulation.
air washed glass
double combustion air
primary air
On these stoves, a kit for the outside air
connection (option)
allows to take the combustion air directly
from the outside.
Stoves with closed air circulation
4
Caractéristiques
Emeraude 1
FeaturesOutput 7 - 9 kwCO Emission (CO% at 13% O2) 0,07 %Efficiency 79,7 %Logs 33 cmWeight 105 kgHeating volume (as an indication) until 300 m3
Top or rear flue exit Ø 150Outside air connection (optional) Ø 100Combustion chamber: double-walled in vermiculite and cast ironOptimization and easy settings of the primary and secondary air intakes withone single handle.
Emeraude 1 with feet Ref : PEM1/N
470 360
Ø150
Ø100
790
300
900
285
Ø150
375
100
*according to the conditions noted on the installation / use manual
5
Emeraude 2
Emeraude 2 with feet and side glasses Ref : PEM2/BL
470 360
Ø150
Ø100
Ø150
790
375
100
300
900
285
*according to the conditions noted on the installation / use manual
6
Caractéristiques
Emeraude 3
FeaturesOutput 7 - 9 kwCO Emission (CO% at 13% O2) 0,07 %Efficiency 79,7 %Logs 33 cmWeight 125 kgHeating volume (as an indication) until 300 m3
Top or rear flue exit Ø 150Outside air connection (optional) Ø 100Combustion chamber: double-walled in vermiculite and cast ironOptimization and easy settings of the primary and secondary air intakes withone single handle.
Emeraude 3 with a log box Ref : PEM3/N
470 360
Ø150
Ø100
380
870
980
365
Ø150
375
100
*according to the conditions noted on the installation / use manual
7
Emeraude 4
Emeraude 4 with log box and side glasses Ref : PEM4/BL
470 360
Ø150
Ø150
Ø100
380
870
980
365
375
100
Choice of colors Emeraude 1/2/3/4
Black paint White enamel Black enamel
*according to the conditions noted on the installation / use manual
8
Aurore white enamel Ref : PAUR/B
Aurore
683
592 361
753
599
530
Ø 15
0
598
221
Colors available
White enamel Black enamel Black paint
AVAILABLE IN JUNE 2015
FeaturesOutput 6-9 kWCO Emission (CO% at 13% O2) 0,100%Efficiency 75 %Logs 50 cmWeight 165 kgHeating volume (as an indication) until 320 m3
Top or rear flue exit Ø 150
Cast iron stove, front and side loading, equipped with the advanced combustion system ACS and outside air direct connection Ø100 (option).
*according to the conditions noted on the installation / use manual
9
10
Integral
Black metallic black
Platinum light grey
chocolate
metallicchocolate
anthracitegrey
inoxJerry et Deck
versions
colours for the Integral cover
Deck Ref : P802C Urban Ref : P801C
Output 8 - 11,2 kW
CO Emission (CO% at 13% O2) 0,12%
Efficiency 77,9%
Logs 50 cm
Weight (central version) 165 kg
Weight (mural version) 152 kg
Heating volume (as an indication) 320 m3
Outside air direct connection (not for the suspended version) Ø 80
Different fitting possibilities :- on a pillar foot (flue diameter : Ø 200)
- double face, centrally positionned (Logs 50 cm)- mural (Logs 42 cm)
- Suspended (flue diameter : Ø 200)- double face, centrally positionned- mural
Specific piece for the suspensionFor double face model, the stove can be filled with logs from both sides.
Features
Ø615
700
Ø 200
615392
1007
710
central version
700
270
630
520
front
Ø80
80
400
mural air intake
mural version suspended version
11
Jerry : modèle suspendu - double face Réf : P800CJerry : suspended stove - double face Ref : P800C
*according to the conditions noted on the installation / use manual
12
Features
Kubic : mural version Ref : PKUB/M
Kubic
Output 6 - 9 kW
CO Emission (CO% at 13% O2) 0,17%
Efficiency 71,7%
Logs 33 cm
Weight (central version) 105 kg
Weight (mural version 118 kg
Heating volume (as an indication) 300 m3
Top flue exit Ø 180
Double combustion
Outside air direct connection
Bed plate with bricks
Ventilated glasses
180
face view back view back viewwith sleeve
OUTSIDE AIR
right viewwith sleeve
OUTSIDE AIR
90
13
Kubic : central version Ref : PKUB/C
*according to the conditions noted on the installation / use manual
694
529
350
470,
549
0,5
160
213
74
Ø100
450
585,
7
470184,5
60
20
8590
Ø 244,5400
probe λ+ temperature probe
Ø 180
14
I700P
Output 7 kW
CO Emission (CO% at 13% O2) 0,17 %
Efficiency 81,30 %
Logs 50 cm
Weight 150 kg
Weight of the base: 50 kg
Heating volume (as an indication) 300 m3
Flue exit Ø 180
Outside air direct connection Ø 60
Standard beige bricks, or grey bricks (option)
Damper control system
Door closing by compression
Automatic closing of the door and the damper
Infrared integral glass
Ashpan with air slides for the fire start
Primary and secondary outside air connection
Features
694
529
350
470,
5
Ø 180 164,
5
585,
7
450
I700P: Z shaped base
I700P: Round pedestal option*
*according to the conditions noted on the installation / use manual
IHS VERSION – LAUNCH : SEASON 2015
*Option available on the I800P model
15
I700P: Z shaped base Ref : I700P/S-Z
The I 700P is available with : metallic log box (option) waxed concrete log box (option) waxed concrete basement + bench + module
I700P: Round pedestal option Ref : I700P/SR
16
I800P
Output 8 kWEmission (%CO at 13% O2) 0,10 %Efficiency 75,40 %Logs until 50 cm Weight 150 kgWeight of the base 50 kgHeating volume (as an indication) 300 m3
Flue exit Ø 180
Outside air direct connection Ø 60Standard beige bricks, or grey bricks (option)Damper control systemDoor closing by compressionAutomatic closing of the door and the damperInfrared integral glassAshpan with air slides for the fire startPrimary and secondary outside air connection
Features
796 450
164.
50
635
585,
7
350 Ø 180
935,
7
*according to the conditions noted on the installation / use manual
17
I800P with a log box Ref : I800P/S-B
The I 700P is available with : metallic log box (option) waxed concrete log box (option) waxed concrete basement + bench + module
18
I1000P
Output 8 kWEmission (%CO at 13% O2) 0,17%Particle emissions < 40 mg/Nm3
Efficiency 75,40%Logs 60 cm Weight 180 kgFlue exit Ø 200
Damper control systemDoor closing by compressionAutomatic closing of the door and the damperInfrared integral glassAshpan with air slides for the fire startPrimary and post combustion intakes Ø60Outside air direct connection
Base option available- shaped base- metallic log box (unglazed and see-through)- waxed concrete basement (possibility to add bench and waxed concrete
module)
1000
335
833
587
450
164.
50
500
Ø200
1
23
45
6
1 flue exit Ø200 with female adapter and collar for 2 mm steel stove pipe 2 Upper locker3 Damper lever4 Door handle5 Fire starter6 Air slide on the front to adjust the combustion speed
Features
19
I1000P DF Ref : I1000PDF
1000 506,5
588
Ø200
335
830
Base option available- Z shaped base (not compatible with outside air direct connection)- metallic log box (compatible with outside air direct connection)- waxed concrete basement (not compatible with outside air direct connection)- (possibility to add bench and waxed concrete module)
*according to the conditions noted on the installation / use manual
20
Waxed concrete log box on I700P or I800P
21
Waxed concrete basement + bench + module available on I700P or I800P
22
Ambre
Output 7 - 10,2 kW
Emission (%CO at 13% O2) < 0,120 %
Efficiency > 75 %
Logs 33 cm
Weight 147 kg
Heating volume (as an indication) until 400 m3
Top or rear flue exit Ø 150
Cast iron construction (side, front and back parts of the combustion chamber)
Steel pillar footFront door loadingAdjustable primary air inletOutside air connection (optional)
Incorporated ash panClean glass with front air wash system
Double combustion with secondary air inlet on the upper part of the glassSilkscreen printed glass, double layered glass
Features
Ambient air inlet
Outside air inlet :put the collar Ø 80
AB
1 - Put the obstructrion plate A
2 The collar B ensures heatproof
Ambient air inlet Oustide air inlet:put the manifold
under the bed plate and the collar Ø 80
OUTSIDE AIR
Combustion air inlet control
Integrated latch Top with warm convection air
Ash pan
Ambre on a pillar foot
Ambre with a log box
*according to the conditions noted on the installation / use manual
23
Ambre: model with silkscreen printed glass Ref : PA/SR
Ambre with a log box Ambre on a pillar foot
Ref : PAB/N Ref : PA/N
510
235
475
model with silkscreen printed glass
24
Jade [on a pillar foot]
Output 5 - 7 kw
CO Emission (CO% at 13% O2) 0,07 %
Efficiency 79 %
Logs 30 cm
Weight 165 kg
Heating volume (as an indication) until 250 m3
Top or rear flue exit Ø 150
All cast iron construction
Combustion chamber: double-walled in vermiculite and cast iron
Two adjustable primary air inlets :
- For an optimal combustion
- To keep the glass clean
Double combustion with fixed flow
Outside air connection (optional)
Features
� - Ambient air inlet : remove the cover A
� - Outside air inlet from the ground: place the stove on the aperture (Ø 100), put the cover. The collar B ensures the heatproof.
� - Outside air inlet from the back wall: put the cover A, remove the cover C et replace by the collar D (Ø100)
A,B,C and D accessories are delivered with the stove.
AB
C
D
� � �
OUTSIDE AIR
technology
25
Jade on a pillar foot Ref : PI/GPI
Terrad’Oriente
Off-white
Version with ceramic lateral panels Terra d’Oriente
Ref : PJ/GPI TO
*according to the conditions noted on the installation / use manual
Defra Approved For Smoke Control Areas
26
Jade [with a log box]
Output 5 - 7 kw
CO Emission (CO% at 13% O2) 0,07 %
Efficiency 79 %
Logs 30 cm
Weight 165 kg
Heating volume (as an indication) until 250 m3
Top or rear flue exit Ø 150
All cast iron construction
Combustion chamber: double-walled in vermiculite and cast iron
Two adjustable primary air inlets :
- For an optimal combustion
- To keep the glass clean
Double combustion with fixed flow
Outside air connection (optional)
Features
technology
� �
E
� - Ambient air inlet
� - Air inlet from the back wall : put the collar E Ø 100 (delivered with the stove)
OUTSIDE AIR
27
Jade with a log box Ref : PJ/GBU
*according to the conditions noted on the installation / use manual
Defra Approved For Smoke Control Areas
28
Output 5 - 7 kwCO Emission (CO% at 13% O2) 0,07 %Efficiency 79 %Logs 30 cmWeight 165 kgHeating volume (as an indication) until 250 m3
Top or rear flue exit Ø 150
All cast iron construction Combustion chamber: double-walled in vermiculite and cast ironTwo adjustable primary air inlets :
- For an optimal combustion- To keep the glass clean
Double combustion with fixed flowOutside air connection (optional)
Features
Jade technology
grey paintRef : PJ/G
Péridot green enamelRef : PJ/V
off-white ceramicside panelsRef : PJ/GPI BM
Terra d’Oriente ceramic side panelsRef : PJ/GPI TO
OUTSIDE AIR
Ashpan
29
Jade blue enamel Ref : PJ/B
brown enamelRef : PJ/M
cream enamelRef : PJ/C
*according to the conditions noted on the installation / use manual
Defra Approved For Smoke Control Areas
30
Output 9 - 11 kWCO Emission (CO% at 13% O2) 0,09 %Efficiency 78 %Logs 60 cmWeight 215 kgHeating volume (as an indication) until 400 m3
Top or rear flue exit Ø 150All cast iron construction
Combustion chamber: double-walled in vermiculite and cast iron
Front and side loading doors.
Two adjustable primary air inlets :
For an optimal combustion
To keep the glass clean
Oustide air connection (optional)
Double combustion with fixed flue
Features
Topaze technology
grey paintRef : PT/G
blue enamelRef : PT/B
Péridot green enamelRef : PT/VP
OUTSIDE AIR (OPTION)
Outside air inlet :put the manifold at the back of the
stove and the collar Ø 100.
Bottom admission Aor rear B
A
B
side loading door
Ashpan
31
Topaze Brown enamel Ref : PT/M
cream enamelRf : PT/C *according to the conditions noted on
the installation / use manual
32
Saphir
Output 6 - 9 kwEmission (%CO à 13% O2) 0,1 %Efficiency 75 %Logs 50 cmWeight 165 kgHeating volume (as an indication) until 320 m3
Top or rear flue exit Ø 150All cast iron construction
Combustion chamber: double-walled in vermiculite and cast iron
A front and a side loading doors.
Two adjustable primary air inlets :
For an optimal combustion
To keep the glass clean
Outside air connection (optional)
Double combustion with fixed flue
Features
technology
265*
26*
* Axe Outside Air Verticale
OUTSIDE AIR (OPTION)
Outside air inlet :put the manifold at the back of the
stove and the collar Ø 100.
Bottom admission Aor rear B
A
B
Péridot green enamelRef : PS/VP
grey paintRef : PS/G
Blue enamelRef : PS/B
side loading doors
Ashpan
33
Saphir cream enamel Ref : PS/C
Brown enamelRef : PS/M
*according to the conditions noted on the installation / use manual
Defra Approved For Smoke Control Areas
34
Onyx
Output 9,7 kWEmission ( % CO à 13 % O2) 0,11 %Efficiency 75,3 %Logs 50 cmWeight without cover pipe : 236 kg including cover pipe : 262 kgHeating volume (as an indication) until 400 m3
Top flue exit Ø 200
All steel construction.
Combustion chamber: all cast iron constructrion
Front door loading
Adjustable damper for an optimal performance
Valve command system preventing the door from opening when the valve is closed
Double combustion
Incorporated ashpan
A
djus
tabl
e to
a c
eilin
g he
ight
of 2
70 c
m (c
ut th
e pa
rt C
)
C
Features
refer to page 39
Version with log box and visible pipe Ref : PONYX/BU
35
Onyx Ref : PONYX
*according to the conditions noted on the installation / use manual
36
Opale
Output 9,7 kWEmission (%CO à 13% O2) 0,11 %Efficiency 75,3 %Logs 50 cmWeight without cover pipe : 210 kg including cover pipe : 248 kgHeating volume (as an indication) until 400 m3
Top flue exit Ø 200
All steel construction.
Combustion chamber: all cast iron constructrion
Front door loading
Adjustable damper for an optimal performance
Valve command system preventing the door from opening when the valve is closed
Double combustion
Incorporated ashpan.
Features
refer to page 39
black frame
Version with log box Ref : PO/NBUBlack frame (option) - Frame option
not compatible with version with log box
Version with visible pipe
37
Model with cover pipe option for a ceiling height from 250 to 270 cm
Ref : PO/N
*according to the conditions noted on the installation / use manual
38
technology Technologie ACS**Advanced Combustion System (For Jade, Saphir et Topaze)
Rear flue exit
Top flue exitExit Ø 150 Top or rear flue
exit
Combustion air inletwith regulated flow.
Keep the glass cleanSecondary
combustion air inlet
with fixed flow
Primary air combustion inlet with regulated flow
Exit Ø 150 Top or rear flue
exit
Secondary combustionair inlet with
fixed flow
Primary combustionair inletwith regulated flow
Combustion air inletwith regulated flow..
Keep the glass clean.
Top flue exit
Rear flue exit
Combustion with regulated flow to keep the glass cleanSecondray combustion with fixed flow
Primary combustion with regulatedflow
39
Option kit ventilation For Onyx et Opale
Ventilator easily accessible
Flow : 230 m3/h Consumption : 45w
Option: the ventilation kit
is placed at the back of the stove
Air inlet for double combustion sys-tem.
The cover pipe is adjustable according to the
ceiling height Until 270 cm
Ventilated ceiling plate on the back part.
Curved cover pipe for Onyx
Straight cover pipe for Opale
Option pipe coverFor Onyx et Opale
Ad
just
able
- cu
t th
e p
art
A
Made in France
Z.I. de Lhérat - 63310 Randan - France+33 (0)4 70 56 16 00
www.seguin.frexport@seguin.fr