Post on 20-Apr-2018
transcript
Ø 16
Ø 3/4“
1
2
3
4
Rev. 06-2017besseytools.com
Workbench AdapterClamping element for workbenches with a 3/4" hole
Accessory for workbenches
Workbench adapter, 16 mm, TW16AWAccessories for BESSEY® TWV and TW clamping elements with 16 mm hole system. Suitable for common workbenches with a hole system (see below). Can be used without tools. The stud pin can be changed to use other hole systems.
BESSEY® provides solutions for fixing workpieces to workbenches. Use the TWV and TW clamping elements in conjunction with one of the workbench adapters on a workbench.
1 NEW adapters for workbenches BESSEY® TWV and TW clamping elements with a 16 mm hole system (see page 49-50) can be
used on wooden workbenches using an easy-to-use adapter. Put the 16mm clamp into the adapter and place into the table hole. See chart below for configurations.
2 Flexible or fixed throat depth Adjustable throat depth (TWV) and fixed throat depth (TW) are available in 3 handle variants.
3 Handle variants The ratchet mechanism ensures rapid, controlled, vibration-free clamping. The T-Bar
versions and more traditional 2K handle offer excellent options for the end user.
BESSEY® Tools North America1-800-828-1004 · Fax (519) 621-3442
Clamp Hole Diameter
Workbench Hole Diameter
Approx.Weight
TW16AW19 16 mm 3⁄4" 0.82 lbsTW16AW20 16 mm 25⁄32" 0.85 lbsTW16AW25 16 mm 1" 0.90 lbsTW16AW30 16 mm 1 11⁄64" 0.95 lbs
TWX TWX+ TWA-STC + STC-HH
TWV...-K TWV...-HTWV...-2K
besseytools.com
TW...-K TW...-HTW...-2K
TW16VAD TWVAD
Clamps adaptable to woodworking benches using TW16AW
Table clamp extension, TWX
■■ Accessory for BESSEY® STC toggle clamp with horizontal base plate■■ Without bolt for screwing to the extension TWX. With bolt for clamping slightly elevated pieces.
■■ Accessory for BESSEY® toggle clamp adapter TW16A-STC and TWVAD■■ Lowering of round workpieces is infinitely adjustable using the adjusting ring in the table■■ Use with TWVAD – requires one 8 x 40 mm flat head screw.
■■ TW16AW adapter goes into the table, and clamps fit in the adapter.■■ Precise, individual clamping with variable height and throat depth.■■ Tempered profile and sliding arm for strong, dependable clamping■■ Various design versions: high quality 2-component plastic handle; T-Bar with rounded ends (each
with smooth-running ACME threaded spindle and tool free pressure plate replacement); or lever handle with a ratcheting mechanism for controlled, fast, vibration-proof clamping.
Table clamp, variable throat depth, TWVHandle Style
Hole Diameter
Clamping Capacity
Nominal Throat Depth
Rail Profile
Clamping Force
Approx.Weight
TWV16-20-15-2K Composite 16 mm 8" 1 3⁄16" - 6" 7⁄8" - 3⁄8" 550 lbs 2.50 lbsTWV16-20-15K T-Bar 16 mm 8" 1 3⁄16" - 6" 7⁄8" - 3⁄8" 550 lbs 2.34 lbsTWV16-20-15H Lever 16 mm 8" 2 3⁄8" - 6" 7⁄8" - 3⁄8" 550 lbs 2.72 lbsNote: Clamping force calculated at a height of 2-3 In on a solid all steel welding table platform
Table clamp, fixed throat depth,TWHandle Style
Hole Diameter
Clamping Capacity
Nominal Throat Depth
Rail Profile
Clamping Force
Approx.Weight
TW16-20-10-2K Composite 16 mm 8" 4" 7⁄8" - 3⁄8" 650 lbs 2.06 lbsTW16-20-10K T-Bar 16 mm 8" 4" 7⁄8" - 3⁄8" 650 lbs 1.91 lbsTW16-20-10H Lever 16 mm 8" 4" 7⁄8" - 3⁄8" 650 lbs 2.22 lbsNote: Clamping force calculated at a height of 2-3 In on a solid all steel welding table platform
Hole Diameter Suitable for Approx.WeightTW16A-STC 16 mm STC-VH / STC-HH / STC-IHH 0.39 lbs
Table toggle clamp adapter, TW-STC
Hole Diameter Suitable for Adjusting Range Approx.Weight
TW16X 16 mm TW16A-STC / TW16VAD / TWVAD 5⁄8" - 7 7⁄8" 0.93 lbs
Hole Diameter Angle Jaw Face Width Approx.Weight
TW16VAD 16 mm from 60° inner to 60° outer 1 13⁄16" 0.82 lbsTWVAD – from 60° inner to 60° outer 1 13⁄16" 0.62 lbs
BESSEY®
Woodworking bench systems
Table clamp accessories, TWVAD■■ Specifically adapted to round, oval and square workpieces. ■■ Angle infinitely adjustable from 60° internal to 60° external. ■■ TW16VAD with bolt for rapidly aligning slightly elevated pieces.
TWVAD without bolt for variable movement.■■ 2 pieces per bag.