Post on 12-Jul-2018
transcript
X-TENSION 110 P4 End Terminal
SINGLE SIDED X-TENSIONreg | FULLY REDIRECTIVE END TERMINAL
reg
bull COST EFFECTIVE PROTECTIONbull NO FOUNDATION REQUIREDbull MEETS EN1317-4 P4 CRITERIA AT 110KMHbull D11 UNIVERSAL SYSTEM - CONTROLLED PERFORMANCE ON IMPACT
Under impact the X-TENSIONreg oers exceptional vehicle control and energy absorbing capabilities in head on collision where the energy is absorbed with resistance as the impact head travels along the tensioned rope rather than being transferred down the beams as occurs with other compression based systems
PHYSICAL SPECIFICATIONS
IMPACT HEAD
Width
Height
Weight
500mm
750mm
450kg
The X-TENSION 110 P4 Terminal is a universal D11 System oering unique advantages to maintenance contractors and installers The system consists of a universal head which is suitable for the left hand (verge) and right hand (departure of central reserve) applications The system is approved for use on UK roads and is listed in the lsquoHE Accepted EN1317 COMPLIANT ROAD RESTRAINT SYSTEMSrsquo It is also approved by the NRA for use in the Republic of Ireland
The X-TENSION 110 P4 Terminal features tension technology which dissipates impact energy by tension rather than compression The impact energy is smoothly transferred from the head unit into the tension cables allowing superior post impact vehicle control and redirection even with high angle impacts By using superior engineering this end terminal oers exceptional vehicle control and energy absorbing capabilities in head on impacts and side impacts Full Vehicle-direction and a controlled predictable behaviour pattern is apparent from the rst post providing a superior performance at moderate cost
P4 REDIRECTIVE END TERMINAL | Single Sided X-TENSIONreg 110
Classifcication Redirective
Test Level EN1317 - 4 110kmh
FREQUENTLY ASKED QUESTIONS
What kind of barrier can the X-TENSION end terminal be connected toThe X-TENSION can be directly attached to lsquoWrsquo beam type barrier systems and Open Box Beam systems using an A06 - SF11 connector The system can also be attached to concrete barrier with standard transitions
What maintenance is requiredX-TENSION is very easy to maintain An annual cleaning is recommended thorough inspection and protection of all the important parts
Is the transportation of the X-TENSION end terminal easyThe X-TENSION is very easy to be transported to site with it weighing only 450kg
FEATURES
raquo Meets EN1317- 4 P4 raquo NRA approved for the Republic of Irelandraquo Can be installed on concrete or asphaltraquo Can be attached to concrete barrier with standard transitionsraquo Contractor friendlyraquo No foundation requiredraquo Suitable for any kind of road
The X-TENSION System is available with an optional high visibility nose
Highway Care Ltd The Highlands Detling Hill Maidstone ME14 3HT T +44 (0) 1622 734215 E infohighwaycarecouk
reg
reg
reg
reg
reg
reg
reg reg
reg
I
X-TENSION POST
X-TENSION W BEAMreg
reg
Length 117m
SOIL ANCHOR
PHYSICAL SPECIFICATIONS
IMPACT HEAD
Width
Height
Weight
500mm
750mm
450kg
The X-TENSION 110 P4 Terminal is a universal D11 System oering unique advantages to maintenance contractors and installers The system consists of a universal head which is suitable for the left hand (verge) and right hand (departure of central reserve) applications The system is approved for use on UK roads and is listed in the lsquoHE Accepted EN1317 COMPLIANT ROAD RESTRAINT SYSTEMSrsquo It is also approved by the NRA for use in the Republic of Ireland
The X-TENSION 110 P4 Terminal features tension technology which dissipates impact energy by tension rather than compression The impact energy is smoothly transferred from the head unit into the tension cables allowing superior post impact vehicle control and redirection even with high angle impacts By using superior engineering this end terminal oers exceptional vehicle control and energy absorbing capabilities in head on impacts and side impacts Full Vehicle-direction and a controlled predictable behaviour pattern is apparent from the rst post providing a superior performance at moderate cost
P4 REDIRECTIVE END TERMINAL | Single Sided X-TENSIONreg 110
Classifcication Redirective
Test Level EN1317 - 4 110kmh
FREQUENTLY ASKED QUESTIONS
What kind of barrier can the X-TENSION end terminal be connected toThe X-TENSION can be directly attached to lsquoWrsquo beam type barrier systems and Open Box Beam systems using an A06 - SF11 connector The system can also be attached to concrete barrier with standard transitions
What maintenance is requiredX-TENSION is very easy to maintain An annual cleaning is recommended thorough inspection and protection of all the important parts
Is the transportation of the X-TENSION end terminal easyThe X-TENSION is very easy to be transported to site with it weighing only 450kg
FEATURES
raquo Meets EN1317- 4 P4 raquo NRA approved for the Republic of Irelandraquo Can be installed on concrete or asphaltraquo Can be attached to concrete barrier with standard transitionsraquo Contractor friendlyraquo No foundation requiredraquo Suitable for any kind of road
The X-TENSION System is available with an optional high visibility nose
Highway Care Ltd The Highlands Detling Hill Maidstone ME14 3HT T +44 (0) 1622 734215 E infohighwaycarecouk
reg
reg
reg
reg
reg
reg
reg reg
reg
I
X-TENSION POST
X-TENSION W BEAMreg
reg
Length 117m
SOIL ANCHOR