“Your Custom Made – UV-Application”

Post on 25-Dec-2021

3 views 0 download

transcript

“Your Custom Made – UV-Application”

“Your Custom Made – UV-Application”

UV-EL GmbH & Co. KG Moritzburger Weg 67 01109 Dresden Tel. +49 351 883831-04 Fax +49 351 883831-00 info@uv-el.de www.uv-el.de

Custom Made UV Systems for Various Applications:

• Disinfection of process water, drinking water, pool - and waste water, air and surfaces

• Destruction of residual ozone and TOC reduction in ultrapure water

• Reduction of chloramines in swimming pool water

• UV - Wet oxidation (AOP) using UV radiation for degradation of organic matter in water

• UV laboratory technology (low pressure, medium pressure, and electrode-less lamps)

• UV special applications

“Your Custom Made – UV-Application”

general partner: • UMEX GmbH Dresden

• www.umex.de

How to Find Us

UV-EL GmbH & Co. KG Moritzburger Weg 67 01109 Dresden Tel. +49 351 883831-04 Fax +49 351 883831-00 info@uv-el.de www.uv-el.de

“Your Custom Made – UV-Application”

UV disinfection

• Water (process water, drinking water, pool-, pure and waste water)

• Surfaces (foils, containers, etc.)

Custom made UV systems for various applications:

Our Products

high-purity water

• UV disinfection

• TOC degradation

• Elimination of remaining ozone

Reduction of chloramines

• private pools, whirlpools and public baths

“Your Custom Made – UV-Application”

UV wet oxidation (AOP)

• wastewater treatment

• special cases of drinking water treatment

Special UV applications

• photochemistry, photobiology

• photocatalysis

• specialty chemicals

Custom made UV systems for various applications:

Our Products

laboratory techniques

• laboratory equipment with a variety of lamps

• electrodless lamps

“Your Custom Made – UV-Application”

Product Overview UV Systems www.uv-el.de

UV-EL GmbH & Co. KG UV Applications & Electrodeless UV Lamps

Moritzburger Weg 67 01109 Dresden - Germany

info@uv-el.de

www.uv-el.de

+49 (351) 8838 3104

“Your Custom Made – UV-Application” 6

UV Radiation Systems for Various Applications

UV Applications

UV disinfection

water

reservoir

surface

air

specialty chemicals

food (syrup)

Special Applications in high-purity water

TOC degradation

destruction of residual ozone

Special application with Medium pressure lamps

UV wet oxidation

reduction of chloramines in swimming pool water

Photochemistry Photobiology

“Your Custom Made – UV-Application” 7

Major Systems

UV Systems and components

standard types

single lamp

systems

MIP – series 11 - 25 W

VAP – series 36 – 400 W

UXPM series 400 – 7000 W

multi lamp

systems

UXP series bis 15 x 400 W

OEM

components

quartz tube system

11 – 300 W

custom made solutions

single lamp

systems

LE & PH Series 25 - 400 W

multi lamp

systems

UXP PH Series bis 4 x 400 W

positive geometry

More custom systems on request!

“Your Custom Made – UV-Application” 8

UV Disinfection Systems for Process Water

MIP P - series VAP P - series UXP P - series EL – LE / EL- PH /

UXP LE / UXP PH – series

Q to1,4 m³/h Q > 1,4 – 50 m³/h Q > 50 m³/h Q to 50 m³/h per reaktor

(depending on the necessary fluence) single lamp system

with low pressure lamps

(special system with lamps for TOC degradation)

single lamp system with low pressure or amalgam lamps

(special system with lamps for TOC degradation)

multi lamp system with amalgam lamps

Special systems for food and pharmaceutical industry as single and multi lamp systems

power to 25 W power to 400 W power to 6,000 W power to 1,600 W

Custom systems up to a volume flow of 550 m³/h per reactor!

“Your Custom Made – UV-Application” 9

UV Disinfection Systems for Waste Water

MIP P - series VAP AW s series UXP AW - series UXPM AW - series

Q to1,4 m³/h Q to 11 m³/h Q > 11 m³/h Q to 150 m³/h

(depending on the necessary fluence) single lamp system

with low pressure lamps

single lamp system with low pressure or amalgam lamps

multi lamp system with amalgam lamps

single lamp system with medium pressure lamps

power to 25 W power to 400 W power to 2,800 W power to 7,000 W

“Your Custom Made – UV-Application” 10

UV Radiation System for Swimming Pool Water

VAP – series UltraDis® pico UltraDis® Q-Serie

Disinfection UV Disinfection and reduction of chloramines

Q > 1,4 – 50 m³/h Q to 7,3 m³/h Q bis 240 m³/h

single lamp system with low pressure and amalga lamps

UV system with medium pressure lamp UV systems with medium pressure lamps

cross flowed reactor

power to 400 W power 400 W power to 6,000 W

“Your Custom Made – UV-Application”

Choice of Special Systems www.uv-el.de

“Your Custom Made – UV-Application” 12

Application of UV Radiation in High-Purity Water Treatment

UV systems and components

Disinfection

reservoir high-purity water

TOC degradation

circuit single cycle

Elimination of remaining ozone

“Your Custom Made – UV-Application” 13

System Comparison - Differences between MIP/VAP and PH / LE Series

characteristics MIP / VAP - series PH / LE - series

custom made UV systems

construction Z-Form L-Form

reactor with cap and bottom (welded) rector with torispherical bottom and clamp cover

surface treatment reactor inside

pickled electropolished (optional grinded to Ra < 0,8 mm) - custom

spring for fixing the quartz tube lower spring is not removable lower spring (at water input) completely removable, reactor is completely drained and dead space free

reactor material 1.4301 or 1.4404 1.4404 or 1.4435

switch box thermoplastic or steel sheet stainless steel

“Your Custom Made – UV-Application”

Special Systems of EL-PH- and UXP – PH- Series

characteristics EL-PH / UXP PH - series

construction L-Form

reactor rector with torispherical bottom and clamp cover

surface treatment reactor inside

electropolished - custom (optional grinded to Ra < 0.8 µm) -

spring for fixing the quartz tube

lower spring (at water input) completely removable, reactor is completely drained and dead space free

reactor material 1.4404 or 1.4435

switch box stainless steel

“Your Custom Made – UV-Application” 15

Custom Made System for Pharmaceutical Industry

UV Systems of PH - series mit custom made switch cabinet

“Your Custom Made – UV-Application”

System Overview

UV Systems for TOC Degradation

Standard Application

VAP TOC -

series

EL-TOC -

series

Special Applications

VAP TC ME - series

UXP TC ME - series

“Your Custom Made – UV-Application”

Special Application

Corrosion protection coating for: • The reactor corpus

• The reactor cover

• The quartz tube system

• (optional outside) Applications:

• salty water

• and other corrosive media

“Your Custom Made – UV-Application”

Custom Made System with Positive Radiation Geometry

Module for light exposure – UV-radiation device (320 nm) with these characteristics:

• positive radiation geometry

• quartz and filter tube for wavelenght selection

• integrated floating body (material 1.4435 smoothed 0,5 µm, electropolished Delta ferrite < 3 %)

• aseptic flansche TC DN 15 according DIN 11864

and following lamps:

• 8 x 40 W special low pressure lamps

• incl. UVA sensor for each lamp

“Your Custom Made – UV-Application” 19

Quartz tube system as OEM Components

for container and air disinfection

• low pressure lamps 11 - 60 W

• amalgam lamps 120 - 300 W

• medium pressure lamps 2 - 7 kW

application of quartz tube systems

• container disinfection

• air disinfection

• surface disinfection

• as an OEM - version in a wide range of other applications usable

quartz tube system

with electronic ballast

“Your Custom Made – UV-Application” 20

Examples of customer-specific systems with medium pressure UV

lamps

experimental system for local testing incl. pump and H2O2 dosing

UV medium pressure system e.g. for (reduction of chloramines in swimming pool water)

application Reduction of chloramines and UV - wet

oxidation (AOP)

“Your Custom Made – UV-Application” 21

Custom Made UV Systems for Process Water Disinfection

Flow rate up to 550 m³/h per reactor

(depending on UV transmission and necessary fluence)

“Your Custom Made – UV-Application” 22

UV Radiation Systems (medium pressure) Wet Oxidation „UXPM

OX – Series“

Mobile pilot plant for removal of cyanide in the process water. System has injector for injecting hydrogen peroxide.

Application range:

• Treatment of groundwater, contaminated with pesticides, VHH's, BTEX, phenols, etc.

• Treatment of wastewaters with high levels of AOX

• Treatment of toxic wash water,

• Decolorization of dye factory waste water

• Demetallation of electroplating waste water

• Improve the biodegradability of waste water from chemical industry

“Your Custom Made – UV-Application” 23

Your Contact Persons

Steffen Johne Managing Director Equipment Dimensioning & Special Projects

johne@uv-el.de

0351/88383104

Heike Wolf Customer Support hwo@uv-el.de

0351/88383104

Heido Herrmann Construction Special Systems hh@uv-el.de

0361/6636600

Rico Schwarzbach Service, Installation

service@uv-el.de

0351/88383105

01522/7922491

Dr. Andreas Meyer Research and Development ame@uv-el.de

0361/6636600 Additional information on our website www.uv-el.de