Zercon- LED lighting manufactured in India

transcript

LED Lighting Solutions

About Mitva….

• Mettwa Electricals and Appliances Pvt. Ltd. (MEAPL) has been established to provide

energy efficient and environment friendly LED lighting products to various categories of

consumers including organizations and general public. We manufacture and sell various

types of LED lights, Solar LED lights and many other types of luminaries and electrical

appliances.

• This is a joint venture between Sh. R.P. Khaitan (Jt. Managing Director Nippo Batteries

Company Limited ). and Sh. Saleem Shervani, (MD of Shervani Industrial Syndicate Ltd

and also a former Union Cabinet Minister.)

• Nippo is the second largest company in India for dry cell batteries, torches etc with a

market share of 32%.

• Shervani Industrial Syndicate Ltd. (SISL ) was formerly known as GEEP Industrial Syndicate

Ltd. renowned manufacturers of Geep brand flashlight cases and dry cell batteries

• Some of the main products of our LED lights portfolio include LED Street light, LED Solar

Street light, LED Down lighters, LED Panel lights & LED Bay lights together with smaller

products like LED Tube lights and LED Bulbs.

VISION

• To be a one stop solution

for all LED Luminaries

which are cost

competitive, matching

with the best in quality

and after sales service.

MISSION

• To contribute to the

society by providing

cost effective, energy

efficient and

environment friendly

LED lighting products.

Benefits of LED lights?Feature Benefit

Energy efficient Saves 60% to75% in power consumption.

Long lasting Life more than 50,000 hours (typically >10 years)

High power factor Power factor > 0.90

Maintenance free No replacements of lamps and ballasts

Instant start Flicker free, within nanoseconds

Environment friendly No mercury, lead or heavy metals. No issues of safe

disposal of toxins

Dimmable Lighting intensity can be controlled as per requirement

Amenable to solar

Low wattage results in lower cost of solar solution

Natural light Closest to daylight spectrum, clarity in image capture for

CCTV, and true colour rendition

No infrared and

ultraviolet spectrum

Does not attract insects

Unidirectional light Higher usable lumens. No light pollution, friendly to dark

Green technology Potential for earning carbon credit

The LED directional advantage

• Conventional lighting is

omni - directional

- Lower “usable lumens”

• LED Light is

unidirectional

- Higher “usable lumens”view angle

Conventional Lighting

Light Source FTL MHL Sodium CFL LED

Lumens per watt at

source

60-104 70-80 65-105 50-70 100-130

Lumens per watt at

application

45-65 45-50 45-65 40-45 85-110

Correlated Colour

Temperature (Kelvin)

Rated life at 50%

depreciation in lumens

(in hours)

10000 8000 15000 10000 >50000

Health and

Environment friendly

Mercury Heavy

Metals

Mercury No Toxins

Potential for Carbon

Credits

No No No Yes High

Technological Comparison

Lighting for Corporate & Offices

Lighting systems for the “corporate and offices” should meet the

following criteria:

• Adequate illumination.

• Uniform distribution pattern.

• Glare-free for comfort .

• High color rendition and closest to daylight spectrum.

• Energy efficient.

• Maintenance free.

• Environment friendly with no toxic disposal issues.

• Elegant and aesthetically appealing.

High Usage areas where lighting is

used for maximum hours•Reception

•Senior Executive

•Staff/Small Office

•Workstation Space

•Conference Rooms

•Utility Space

•Lunch/Break Room

•Wash room

Reception Area

•Lighting Requirement:

• The lighting levels for reception area should be adequate and match with

interior. The lights should have high CRI for the posters to be displayed in

true colors.

• Recommended Illumination: 150-200 Lux for general illumination

• Color: Neutral White /Warm white

LED Lights for Reception Area

LED 2x2

Product

Output

Replacement

ML –CL32 32W 2X36W CFL

LED DOWNLIGHT

Product

Output

Replacemen

ML-DL16 16 2X16W CFL

Potential for energy saving: up to 60%

Waiting Area

Lighting Requirement:

• The lighting levels for waiting area should be pleasant.

• Recommended Illumination: 100-150 Lux.

• Recommended Colour: warm white

LED Lights for Waiting Area

LED 2x2

Product

Output

Replacement

ML –CL32 32W 2X36W CFL

LED DOWNLIGHT

Product

Output

Replaceme

Senior Executive

•The lighting levels should be fairly good for reading/writing.

• Recommended Colour: Cool White.

LED Lights for Senior Executive Cabin

Product

Output

Replacemen

LED Down Light

Product

Output

Replacement

ML-CL32 32W 2X36W CFL

LED 2x2 Fitting

Staff/Small Office

•The lighting levels for these area should be adequate, uniform and

glare-free.

The lights should have high CRI for replication of true colours.

• Recommended Illumination : 250-300 Lux.

• Recommended Colour : Cool White

LED Lights for Staff/ Small Office

LED 2x2 Fitting

Product

Output

Replacement

LED Tube Light

Product

Output

Replacement

ML-TL16 16W 40W FTL

Workstation space

•The lighting levels should be fairly good and strain free..

• Recommended Color: Cool White.

Product

Output

Replacement

LED 2x2 Fitting

Conference Room

•The lighting levels should be fairly good.

• Recommended Colour: Cool White/ Netural white.

LED Lights for Conference room

Product

Output

Replacemen

LED Down Light

Product

Output

Replacement

LED 2x2 Fitting

Utility Area

• Recommended Colour: Cool White.

LED Lights for Utility Area

Product

Output

Replacement

LED Down Light

Product

Output

Replacement

LED 2x2 Fitting

Lunch/ Break Room

• Recommended Illumination: 150 -175 Lux.

• Recommended Colour: Cool White/ Neutral White.

LED Lights for Lunch/ Break Room

LED 2x2 Fitting

Product

Output

Replacemen

LED Tube Light

Product

Output

Replaceme

ML-TL16 16W 40W FTL

Washroom

•The lighting levels for washroom area should be fairly good.

• Recommended Color: warm white.

LED Lights for Washroom

Product

Output

Replacement

LED Down Light

Product

Output

Replacement

LED 2x2 Fitting

Street and Façade Light

•Lighting with moderate lux levels is required so that people can see

the surrounding and Façade or hording can be seen from a distance

clearly.

• Recommended Illumination: 12-14 Lux for street light and around

400 Lux at billboard.

• Recommended Color: White.

LED Lights for PeripheryLED Street Light

Pole mounted, IP65 light in Pressure Die

housing and tilt able mounting

arrangement.

Product

Output

Replacement

ML-SL90 90W 250W HPSV

LED Focus Light

IP65 light with extruded aluminum

modules

Product

Output

Replacement

ML-FL90 90W 250W HPSV

Ambience and Visibility

FTL Lights LED Lights

HPSV Lights LED Lights

How to select LED Lights?

Technical Competence of Supplier should be evaluated on below criteria

• In-house design, development and manufacturing capability of critical elements:

Electronic Drivers

Light Engine

• Test certificates of polar candela distribution as per LM79 standard.

• Capability to provide application specific LED lights.

• Ability to provide lighting plans for all applications.

• Ability to support warranty on products.

• Capability to provide after sales service across the country.

Technical features and standards of Products that should be looked at.

• LED lights should meet International Standards.

• LED lights should meet safety standards of EN 60598, EMC/EMI as per

EN 61547/EN 55015, and EN 61000-3-2 and 61000-3-3 for Harmonics.

• LEDs should be sourced from world’s best producers:

Lumiled

• LEDs should be bin-selected for color temperature and lumens-per-watt.

• LEDs should be mounted on metal core PCBs.

Essential Infrastructure for manufacturing

• Dust free air conditioned environment for assembly of LED

modules and PCBs

• Automatic Pick and Place machine for placement of LEDs and

electronic components in drivers.

• Product Design capability on CAD platforms.

Mitva– Manufacturing Plant

• Allahabad

• “State of the art” manufacturing machines

Mitva– Manufacturing Plant

Our Services to customers

We offer the complete lighting solution –

1. Study the lighting requirement.

2. Make the lighting plan for required Lux level.

3. Calculate the total required light quantity.

4. Provide the mounting and installation support.

5. After warranty AMC support.

6. Customized lighting solution.

ROI Calculation

Power saving and Payback calculation for with LED lights

Sr. # Parameters

Street

Fixture

Downligh

tMR -16 CFL FTL T8

LEDHPS

VLED PL LED CFL LED

LED CFL LED T8 LEDHPS

1 Lamp Power Consumption - O/P power (W)50 150 33 72 14 36 4 35 4 11 16 36 160 400

2Power consumption including Electronics/

Ballast/ Control Gear -I/P (W)

5 30 3 8 2 4 1 35 1 11 2 4 20 50

3 Total wattage (W) - I/P + O/P55 180 36 80 16 40 5 70 5 22 18 40 180 450

Maintenance part –Rs.

12Maint . Cost per year (Lamp, Ballast, Choke,

Manpower etc.) Rs. Per fixture

nil 350 nil 250 nil 100 nil 100 nil 100 nil 100 nil 500

ROI CALCULATION –Yr.17 Return on investment in (ROI) - Years 1.13 2.18 1.54 0.24 0.69 1.87 2.77

Other tangibles worth considering

• Lower load

requirement on power

back up:

Lower by 55%

• Reduction in load on

air-conditioning plant:

Lower by 10%

We Solicit from you..

• contact us for any type of lighting need

• we will visit your work place, discuss with you your need

• we will do detailed study of your lighting need

• submit proposal giving our solution to your lighting need

• will work as your partner to give you 100% satisfaction for

lighting need.

Please visit us at: www.mitva.co.in

Contact details: alok.k@ral.co.in

Regd. Office :

B - 7/2 , Okhla Industrial Area, Phase – II, New

Delhi – 110020.

Tel. : +91-11-40500800

Branch Office :

Shervani Nagar, Harwara, Allahabad – 211011.

Tel. : +91-532-2102305

Contact details…

Zercon- LED lighting manufactured in India

Technology