Post on 21-Feb-2022
transcript
Z o n e C a b l i n g S o l u t i o n sB e t t e r Te c h n o l o g y t h r o u g h I n n o v a t i o n
.
Introduct ion
HellermannTyton design and manufacture a range of quality connectivity products for applications in every area of your network infrastructure.From building entry point, to the comms room all the way to the desk, HellermannTyton has a solution for al l of your zone cabling and networking needs.
HellermannTyton offer a full end to end connectivity solution, from building entry through
to the desk or work area network point. For every stage of the network in most areas of the
building, there is a product solution available to help deliver connectivity throughout.
The MDU series provides a building entry point solution which can distribute fibre around the
building for high speed networking. With a wide range of patch panels, patch leads and the
world famous RapidNet pre-terminated solution, HellermannTyton has a number of products
for the comms room or data centre.
HellermannTyton’s zone cabling solutions provide flexibility and networking options across the
network allowing for additional connectivity with intelligent space saving products including
the zone cabling enclosure and the POD box. The zone cabling enclosure is the ideal solution
for data centre or office applications where raised floors or suspended ceiling provide suitable
hosting space.
HellermannTyton products provide reliable, resilient, network connectivity, as well as quality
and high performance across a number of zone applications found in today’s infrastructure
environments.
.
What is Zone Cabling?Zone cabling is a network topology that
offers a high degree of flexibility and
long-term maintenance economy for the
network owner.
With traditional installations, cables are
run from the telecommunications room
directly to the device (See figure 1).
In a Zone Cabling Topology, cables are run
from the telecommunications room to a
consolidation point which is strategically
located to service a specific area or
“Zone”. Cables are then run from the
consolidation point to the device that
requires a network connection or remote
powering (See figure 2).
The primary benefit of implementing zone cabling is that it allows the network to be
increasingly dynamic and cost effective when it comes to move’s, adds and change’s (also
known as MAC’s). Network owners are able to reduce their maintenance costs and network
disruption by having maintenance works carried out from the consolidation point onwards and
therefore managing a much shorter cable run than one compared with a typical direct cabling
installation.
Figure 1
Figure 2
.
4
Appl icat ion Examples
Intel l igent Building
Mission Crit ical
Key
The most obvious and typical application for a
Zone Cabling network design would be for an
intelligent or connected building. By Intelligent
we are simply referring to a building that
utilises a building management system to
monitor and control multiple building services
such as access control, fire safety systems,
HVAC, lighting, security / CCTV. We have
entered an era where more and more devices
require a connection to the buildings data
network using an RJ45 interface.
Any building owner looking to gain greater
return on investment from their network
infrastructure should consider a zone cabling
topology.
Mission critical areas such as escape routes or busy walk ways in building environments such as hospitals or
universities can be highly sensitive to disruption caused by maintenance. A zone cabling topology in this scenario
allows engineers to conduct network maintenance works in areas away from these critical paths allowing normal
day to day operation.
The diagram below shows a university floor plan highlighting a dedicated escape route. The escape route in this
example needs to remain open and free from any obstructions, so by implementing a zone cabling topology, any
closures can be avoided. Adopting the use of Zone Cabling Termination Boxes in ceiling voids to connect rooms
accessed by the escape route is an ideal solution. This allows the campus engineers to carry out any network
maintenance from the Zone Termination boxes, at worst closing of one or two class rooms at a time but avoiding
any disruption to the escape route.
.
1
5
Zone Cabling
Zone Cabling
Consolidations PointsZone Cabling Enclosure (ZCE) 6
Zone Termination Box (ZTB) 7
Work Area
POD Box 8
Secure Surface Outlet 8
Mini Surface Mount Box 9
Sub Floor Box 9
Telecommunications Room
Out of Rack 10
Hinged Wall Brackets 10
Connectivity
Copper Assemblies
Solid Core Patch Cords 11
CP Cords RJ45 Plug to Keystone Jack
11
CP Cords Keystone Jack to Keystone Jack
11
Copper ConnectivityKeystones 12
Modular Panels 12
Fibre
Fibre Enclosures
Customer Connection Point (CCP)
14
MDU - S3 14
MDU - S5 14
FDES 14
FWO 14
Fibre Connectivity
Fibre Patch Leads 15
Fibre Pigtails 15
.
6
Zone Cabling Enclosure installed
Zone Cabling Enclosure OpenZone Cabling Enclosure Closed
The Zone Cabling Enclosure from HellermannTyton provides up to 2U of patching space within the 600mm x 600mm area of raised floor, ceiling void or within a riser. The zone cabling enclosure provides support for any standard 19” patch panels or active equipment as well as RapidNet panels for use with the pre-terminated cassette based solution.
The zone cabling enclosure has a hinged and removable top access door along with additional cable entry knockouts and brush strips on two sides to keep out dust and debris.
Internally, the zone cabling enclosure has front and rear cable management to support patch leads and manage bend radii.
The enclosure is the ideal solution for retail, data centre or intelligent building applications.
Features and benefits
Product Description
• 2U of rack space supporting 19” patch panels• Supports RapidNet panels, standard HellermannTyton copper and
fibre panels and active equipment• Installs below a single 600mm x 600mm raised floor tile, ceiling void
or risers• Hinged and removable lid• Additional cable entry knockouts • Brush strips on two sides to keep out dust and debris• Lockable lid for secure access• Powder coated finish for temperature and humidity protection• Adjustable mounting ears allow for a forward or recessed mounting
position• Works as part of a Zone Cabling topology
ZCE - Zone Cabling EnclosureLockable Steel Enclosure
Zone CablingConsolidation Points
Outlet Type Size ORDER INFOLockable Steel Zone Enclosure
Accepts 2U ZCE2UXXXXGY
Technical Data
Material Powder Coated Mild Steel
Colour Grey
Dimensions (mm)H W D
99.8 492 508
Technical Diagrams
Top External View Top Internal View Side View
Front View
Further information and datasheets at www.htdata.co.uk/products
.
7
Product Description
Zone Termination Box (ZTB) Removable lid and fixing points
ZTB Internal view showing PCB trays with cable anchor points and shielding clamps
ZTB Closed view with brush strip cable entry/exit and lock
The Zone Termination Box (ZTB) from HellermannTyton Connectivity is a compact and robust internal consolidation point. The ZTB has been designed to work as part of a Zone Cabling topology which allows for more flexibility in regards to MAC’s within a structured cabling network. Alternatively it can be used when converting incoming external grade cable over to internal CPR compliant cable.
As standard, the ZTB benefits from HellermannTyton Category 6 PCB technology (backwards compatible with Category 5e). Designed for high performance and reliability this product forms part of the HellermannTyton system warranty when installed by an accredited HellermannTyton installer.
Available in either Unshielded or Shielded variations both models allow for up to 12 cable lines to be terminated.
The compact size of the ZTB means it can be easily fixed into a variety of small spaces in ceiling voids, raised floor, risers or even under the desk.
The base and lid are made from 1.5mm thick mild steel and is supported by internal steel cross-members located on the PCB trays which ensure the ZTB is strong and robust enough to withstand possible damage within shared utility environments.
Features and benefits• Supports Category 6 and Category 5e• HellermannTyton’s Optimised PCB design • Supports POE applications• Available in Unshielded or Shielded• Allows for up to 12 cable lines to be terminated• 1.5mm Mild Steel for added strength• Internal Steel cross-member supports for increased impact resistance• Compact size to allow for installation in restricted spaces• Removable lid for ease of termination• Lockable for security• Fixing points to allow for installation on walls/risers, in ceilings, floor
or under desk• Grey powder coated finish for humidity and temperature protection• Brush strips for easy cable entry/exit and debris free operation• Integral cable anchor points• Shielded version comes with additional cable clamps to allow for
correct shield bonding• Allows for flexibility within a structured cabling network with future
ROI in regards to MAC’s• Port Identification Label
ZTB - Zone Termination Box12 Way Category 6
Zone CablingConsolidation Points
Technical Data
Technical Diagrams
Material Powder Coated Mild Steel
Colour Grey
Dimensions (mm)H W D
36 294 138.6
W
D H
W
D H
Closed View Open View Front View Side View Top View
Outlet Type Shielding ORDER INFOZone Termination
BoxUnshielded ZTB12UC6XX/GY
Shielded ZTB12SC6XX/GY
Further information and datasheets at www.htdata.co.uk/products
.
8
POD Box installed
POD Box 6 Way CAT6A Angled
Secure Surface Outlet open
4 Port POD Box
Secure Surface Outlet 3 port and 6 port
*Modules not included
The HellermannTyton POD box offers flexibility within a Structured Cabling Network. POD boxes come unloaded as standard and can be used in conjunction with a range of compatible HellermannTyton outlets and accessories. Available in either 4 or 6 port presentations with the choice of 25mm, 28.5mm or 34mm conduit entry points. All POD variations benefit from the same dimensions 215mm(h) x 51mm(d) x 62mm(w) which allows them to easily pass through standard 127mm raised floor grommets.
Features and benefits• IK07 Rated• Accepts Industry Standard LJ6C• Available in 4 or 6 Port Presentations• Choice of 25mm, 28.5mm, 34mm Conduit Entry Points• Supplied Unloaded as Standard or as part of a RapidNet
Pre-Terminated solution• Works with Cat5e, Cat6 and Cat6A UTP / FTP Cabling Systems• Fits through 127mm raised floor grommets• Integral anchor point for cable bundles• Port and POD labelling fields• Secure & temporary fixing points
POD Box4 and 6 Port
Secure Surface Outlet in situ
The HellermannTyton Security Outlet is part of our Zone Cabling product range and is designed to prevent unauthorised patch lead removal. It is the ideal solution for any areas with public access, for example hospitals, schools, reception areas or any place where network security is a concern. The Security Outlet is available in a 3 or 6 port configuration and can be easily mounted on to most surfaces.
Features and benefits• Surface Mountable• Internal patch lead fixing point• 3 or 6 port configuration• Supplied unloaded• Category 6 and Category 5e modules available*
Secure Surface Outlet3 and 6 Ports
Zone CablingWork Area
Product Description
Product Description
Outlet Type Size ORDER INFO
Secure Surface Outlet
3 Port LL03U/WH/WH
6 Port LL06U/WH/WH
Outlet Type Size ORDER INFO
POD Box 4 Port
25mm OD Conduit Entry HT-POD-25MM-4P
28.5mm OD Conduit Entry HT-POD-28MM-4P
34mm OD Conduit Entry HT-POD-34MM-4P
POD Box 6 Port
25mm OD Conduit Entry HT-POD-25MM-6P
28.5mm OD Conduit Entry HT-POD-28MM-6P
34mm OD Conduit Entry HT-POD-34MM-6P
Further information and datasheets at www.htdata.co.uk/products
.
9
Mini Surface Mount Box Closed and Loaded
Sub Floor Box side view (entry points)
Mini Surface Mount Box Open and Loaded
Sub Floor Box Loaded
Sub Floor Box Unloaded
Mini Surface Mount Box Open
The Sub Floor Box is an attractive easy to assemble design and is an ideal solution in any area where there is a raised floor.
The sub floor box can accommodate up to 8 single 6C outlets. Manufactured from aluminium, the sub floor box has cable entry points at both ends which accept a maximum cable bundle diameter of 25mm.
The HellermannTyton Mini Surface Mount Box allows for 1 or 2 ports presented using HellermannTyton CAT6 or CAT6A keystone Jacks. The box can be surface mounted to the wall or desk. The box features various cut outs to allow for different cable entry directions, cable tie anchor points and a labelling field.
Features and benefits
Features and benefits
• Aluminium extrusion• 8 x 6C modules*• Cable knock outs at both ends 20/25mm• Labelling field
• Accepts HellermannTyton CAT6 and CAT6A Keystone Jacks• Various cable entry points• Cable tie anchor points• Surface mountable• Labelling field• Front Port knock outs• Snap on lid• Fast and simple installation
Sub Floor Box
Mini Surface Mount Box
1 - 8 Ports - Unloaded
1 or 2 ports - Unloaded
Zone CablingWork Area
Product Description
Product Description
Outlet Type Size ORDER INFOMini Surface Mount Box
1 or 2 Ports - Unloaded WSBUS-02-WH
Outlet Type Size ORDER INFOSub Floor Box 8 x 6C modules AS08/12ESFB
*Modules not included
Further information and datasheets at www.htdata.co.uk/products
.
10
Zone CablingTelecommunications Room
Out Of Rack - 3U RapidNet
3U Hinged Wall Bracket
Out Of Rack - 3U SpaceOut Of Rack - 1U Space/2U RapidNet
The Out of Rack configuration provides 3½U of space which will accommodate 6 port UTP copper and fibre RapidNet cassettes providing a maximum capacity of 84 copper ports or 2016 fibres (when using RapidNet MTP VHD) or a combination of both. Out of Rack accessories are available on request and include gland/conduit kits, basket trays and mini patch leads.
The Out of Rack is manufactured from black powder coated mild steel and is designed to house the majority of network patching and connectivity above the rack or cabinet.
The Hinged Wall Brackets can accommodate up to 3 1U patch panels or active equipment and is the ideal solution for installations where there is only a minimum requirement for patching.
The wall bracket is wall mountable with hinged mounting on one side to allow easy access to the rear of any patching or active equipment. The wall bracket is made from 2mm mild steel with a black powder coated finish.
Features and benefits
Features and benefits
• 3U RapidNet Ready Cassette Space• 2 Zero U Cassette Locations• Maximum capacity 84 Copper Ports or 2016 Fibres• 600mm width for the narrowest server rack• Fits any 50mm pitch basket tray• Vertical cable management into the rack or cabinet
• Wall mountable• Hinged bracket• Cable entry at either top or bottom• Accommodates up to 3 1U patch panels
Out of Rack
Hinged Wall Brackets
3U
2 and 3U
Outlet Type Size ORDER INFO
Hinged Wall Bracket
2U WB2U/BK
3U WB3U/BK
Outlet Type Size ORDER INFO
Out of Rack Enclosure
3U RapidNet RNAORC1
1U Rack space / 2U RapidNet
RNAORC2
3U Rack space RNAORC3
Product Description
Product Description
Further information and datasheets at www.htdata.co.uk/products
.
11
Zone CablingCopper Assemblies
RJ45C6A-10.0M-S-LS/VI-CCA
Solid Core Patch Leads
Cable Type Screening Type
Colour ORDER INFO
CAT6 Solid
U/UTP Violet RJ45NGB-10.0M-S-LS/VI
F/UTP VioletRJ45NGBSLD-10.0M-S-LS/VI
CAT6A SolidU/FTP Violet RJ45C6A-10.0M-S-LS/VI
U/UTP Violet RJ456AU-10.0M-S-LS/VI
RJ45/KSJG6A-10.0M
CP Cords RJ45 Plug to Keystone Jack
Cable Type Screening Type
Colour ORDER INFO
CAT6A U/FTP
Violet
RJ45/KSJG6A-10.0M
CAT6U/UTP RJ45/KSJC6U-10.0M
F/UTP RJ45/KSJC6S-10.0M
Cable Type Screening Type
Colour ORDER INFO
CAT6A U/FTP
Violet
KSJ/KSJG6A-10.0M
CAT6U/UTP KSJ/KSJC6U-10.0M
F/UTP KSJ/KSJC6S-10.0M
KSJ/KSJG6A-10.0M
CP Cords Keystone Jack to Keystone Jack
HellermannTyton offer a bespoke copper assembly service from our Northampton facility. Using high quality cables and connectivity, HellermannTyton produce a variety of standards compliant assemblies. Solid core patch leads can be used to create harness links by cutting the cord in half on site and terminating the open end onto a patch panel, the RJ45 plugs directly into the device or active equipment. The consolidation point (CP) cords can be utilised in accordance with the Zone Enclosures to complete the final connection from consolidation point to device or wall outlet.
Further information and datasheets at www.htdata.co.uk/products
.
12
CAT 6A FTP Keystone CAT 6 UTP KeystonesCAT 6 UTP Keystone
Zone CablingCopper Connectivity
Keystones
Modular Panels
Outlet Type Screening Type Unit ORDER INFOCategory 6 Unshielded Single GSTJC6U-XX
Category 6A ShieldedSingle KSJ08SC6A
12pcs KSJ08SC6A-12
XX denotes colour of keystone
BK BL GN GY OR RD VI WH YL
Panel Type Screening Type U Size Port Count ORDER INFO
Modular Patch Panels
Shielded1U 24 Port HT-FAPP-1U24RS
1U 24 Port PP24G6APA1URS-FD.XX
Unshielded
1U 24 Port GSTPP-1U24RS
1U 48 Port GSTPP-1U48RS
2U 48 Port GSTPP-2U48RS
2U 72 Port GSTPP-2U72RS
PP24G6A-PA1URS-FDHT-FAPP-1U24RS GSTPP-1U48RS
HellermannTyton manufacture a range of connectivity solutions for the structured cabling market. Our Category 6A and Category 6 product set complement our Zone Cabling product solutions by utilising our modular system. This approach allows for dynamic network expansion as well as offering high quality connectivity that performs above and beyond todays standards, supporting PoE applications as well as 10GB requirements (Category 6A).
Further information and datasheets at www.htdata.co.uk/products
.
The Zone Cabl ing Network
5
9
1
2
8
6
7
3
410
1
6
2
7
3
8
4
10
5
9
Zone Cabling Enclosure
Pre-terminated Cassettes
Copper Patch Leads
WAP Security Outlet
Helawrap Cable Management
Distribution Chassis
Copper / Fibre Patch Panels
POD
CAT6 Outlets and Faceplates
MDU - S5 Enclosure
.
14
Customer Connection Point
Zone CablingFibre Enclosures
HellermannTyton manufacture a wide range of enclosures and wall boxes for internal fibre distribution in both commercial and residential environments.
The MDU series offers a number of options depending on the size of the building, the number of offices, departments or businesses that require fibre connection. The S5 and the S3, the large and mid-sized enclosures in the series, are available in both splice and connectorised versions whereas the S1 provides 8 connectorised fibre ports.
The CCE and CCP deliver fibre from outside to inside the building. The CCP offers excellent IP68 seal properties and can be positioned in an underground chamber whereas the CCE is a lockable enclosure with up to 50m of fibre storage.
HellermannTyton also supply a number of other fibre distribution solutions that can be either wall mounted or sub-floor mounted in both connectorised and spliced options, giving flexibility and choice in the infrastructure design.
For the full range of Fibre to the X products and solutions, please visit www.htdata.co.uk
Fibre Enclosures
MDU-S3-BWX MDU-S5-LLWX
Enclosure Type No. Splices Adaptors Adaptor Type IP Rating ORDER INFO
Customer Connection Point (CCP)
2 1 LC PC DuplexIP68 CCPA-M111LX/BK-0
IP54 CCPA-X111LX/BK-0
MDU - S3 48-
IP54
MDU-S3-BWX
12 LC PC Duplex MDU-S3-BWXX-CP12L
MDU - S5 216- MDU-S5-LLWX
24 LC PC Quad MDU-S5-BXWXCP24M
FDES 18 - - - FDES-XXXWH
FWO 4 4SC Simplex / LC
Duplex- FWOA-XX-XX/WH
Fibre Wall OutletFDES
Further information and datasheets at www.htdata.co.uk/products
.
15
Zone CablingFibre Connectivity
FLCXXM4-LCSCDA-10.0M = LC to SC Aqua OM4 Multimode Duplex Crossover 10 metre Fibre Patch Lead
Cable Termination Cable PerformanceConnector
End AConnector
End B Configuration Colour Length
FLCXX Crossover M5- OM5 LC LC LC LC S Simplex LG- Lime Green (OM5) XX.XM Specify
FLSXX Straight M4- OM4 LP LC/APC LP LC/APC D Duplex A- Aqua (OM3/OM4)
M3- OM3 SC SC SC SC M- Magenta (OM4)
M2- OM2 SP SC/APC SP SC/APC O- Orange (OM1/OM2)
M1- OM1 ST ST ST ST Y- Yellow (Single Mode)
S2- OS2 G652D FC FC FC FC
S7- G657A1
FLCXX M4- LC SC D A- 10.0M
FBTXOS1-LPXXSY-01.0M = LC/APC Yellow OS1 Single Mode 1 metre Fibre Pigtail
Cable Termination Cable Performance Connector End A Configuration Colour Length
FBTX OM5- OM5 LCXX LC S Simplex W- White (Universal) 01.0M 1 metres
OM4- OM4 LPXX LC/APC A- Aqua (OM3/OM4) 01.5M 1.5 metres
OM3- OM3 SCXX SC P- Magenta (OM4) 02.0M 2 metres
OM2- OM2 SPXX SC/APC O- Orange (OM1/OM2)
OM1- OM1 STXX ST Y- Yellow (OS1)
OS2- OS2 G652D FCXX FC
OS1- G657A1
FBTX OS1- LPXX S Y- 01.0M
Fibre Patch Leads
Fibre Pigtails
LC to LC Duplex OM5 Patch Lead
LC OM3 Aqua Pigtail
Product Description
Product Description
Optical fibre patch leads are a defining factor in ensuring your network performs to the highest level. Available in multimode and single mode our patch leads are designed for use in permanent connections between active equipment and panels or interconnect/crossconnect between panels. All HellermannTyton patch leads are supplied as a cross over configuration for duplex as standard. Straight through configuration patch leads are available on request.
Pigtails are available in both single mode and multimode and are supplied in standard lengths of 1m. Other lengths and fibre types can be supplied on request.
Pigtails are designed to be spliced onto existing fibre cables, eliminating the need to polish fibre ends on site.
Further information and datasheets at www.htdata.co.uk/products
Europe
HellermannTyton GmbH – AustriaRennbahnweg 651220 ViennaTel.: +43 12 59 99 55-0Fax: +43 12 59 99 11Email: office@HellermannTyton.atwww.HellermannTyton.at
HellermannTyton – BulgariaEmail: officeBG@HellermannTyton.atwww.HellermannTyton.at
HellermannTyton – Czech RepublicEmail: officeCZ@HellermannTyton.atwww.HellermannTyton.cz
HellermannTyton – DenmarkIndustrivej 44A, 1.4000 RoskildeTel.: +45 702 371 20Fax: +45 702 371 21Email: htdk@HellermannTyton.dkwww.HellermannTyton.dk
HellermannTyton – FinlandÄyritie 12 B01510 VantaaTel.: +358 9 8700 450Fax: +358 9 8700 4520Email: myynti@HellermannTyton.fiwww.HellermannTyton.fi
HellermannTyton S.A.S. – France2 rue des Hêtres - CS 8054378197 Trappes CedexTel.: +33 1 30 13 80 00Fax: +33 1 30 13 80 60Email: info@HellermannTyton.frwww.HellermannTyton.fr
HellermannTyton GmbH – GermanyGroßer Moorweg 4525436 TorneschTel.: +49 4122 701-0Fax: +49 4122 701-400Email: info@HellermannTyton.dewww.HellermannTyton.de
HellermannTyton KFT – HungaryKisfaludy u. 131044 BudapestTel.: +36 1 369 4151Fax: +36 1 369 4151Email: officeHU@HellermannTyton.atwww.HellermannTyton.hu
HellermannTyton Ltd – IrelandUnit A5 Cherry OrchardBusiness ParkBallyfermot, Dublin 10Tel.: +353 1 626 8267Fax: +353 1 626 8022Email: sales@HellermannTyton.iewww.HellermannTyton.co.uk
HellermannTyton S.r.l. – ItalyVia Visco, 3/535010 Limena (PD)Tel.: +39 049 767 870Fax: +39 049 767 985Email: info@HellermannTyton.itwww.HellermannTyton.it
HellermannTyton B.V. –Belgium/NetherlandsVanadiumweg 11-C3812 PX AmersfoortTel.: +31 33 460 06 90Fax: +31 33 460 06 99Email (NL): info@HellermannTyton.nlEmail (BE): info@HellermannTyton.bewww.HellermannTyton.nlwww.HellermannTyton.be
HellermannTyton AS – NorwayNils Hansens vei 130667 OsloTel.: +47 23 17 47 00Fax: +47 22 97 09 70Email: firmapost@HellermannTyton.nowww.HellermannTyton.no
HellermannTyton Sp. z o.o. – PolandKotunia 11162-400 SłupcaTel.: +48 63 2237 111Fax: +48 63 2237 110Email: info@HellermannTyton.plwww.HellermannTyton.pl
HellermannTyton – RomaniaEmail: officeRO@HellermannTyton.atwww.HellermannTyton.at
OOO HellermannTyton – Russia40/4, Pulkovskoe roadBC Technopolis Pulkovo, office A 8081196158, St. PetersburgTel.: +7 812 386 00 09Fax: +7 812 386 00 08Email: info@HellermannTyton.ruwww.Hellermanntyton.ru
HellermannTyton – SloveniaBranch Office LjubljanaPodružnica Ljubljana, Ukmarjeva 21000 LjubljanaTel.: +386 1 433 70 56Fax: +386 1 433 63 21Email: officeSl@HellermannTyton.atwww.HellermannTyton.si
HellermannTyton España s.l. –Spain / PortugalAvda. de la Industria 37 2° 228108 Alcobendas, MadridTel.: +34 91 661 2835Fax: +34 91 661 2368Email: HellermannTyton@Hellermann-Tyton.eswww.HellermannTyton.es
HellermannTyton AB – SwedenIsafjordsgatan 516440 KistaTel.: +46 8 580 890 00Fax: +46 8 580 348 02Email: kundsupport@HellermannTy-ton.sewww.HellermannTyton.se
HellermannTyton Engineering GmbH – TurkeySaray Mah Dr. Adnan Büyükdeniz Cad. No:4Akkom Office Park 2. Blok Kat: 1034768 Ümraniye-İstanbulTel.: +90 216 687 03 40Fax: +90 216 250 32 32Email: info@HellermannTyton.com.trwww.HellermannTyton.com.tr
HellermannTyton Ltd – UKWilliam Prance RoadPlymouth International Medicaland Technology ParkPlymouth, Devon PL6 5WRTel.: +44 1752 701 261Fax: +44 1752 790 058Email: info@HellermannTyton.co.ukwww.HellermannTyton.co.uk
HellermannTyton Ltd – UKSharston Green Business Park1 Robeson WayAltrincham Road, WythenshaweManchester M22 4TYTel.: +44 161 947 2200Fax: +44 161 947 2220Email: sales@HellermannTyton.co.ukwww.HellermannTyton.co.uk
HellermannTyton Ltd – UKCley Road, Kingswood LakesideCannock, StaffordshireWS11 8AATel.: +44 1543 728282Fax: +44 1543 728284Email: info@Hellermanntyton.co.ukwww.HellermannTyton.co.uk
HellermannTyton Data Ltd – UKWaterside House, Edgar Mobbs Way Northampton NN5 5JE Tel.: +44 1604 707 420Fax: +44 1604 705 454Email: sales@htdata.co.ukwww.htdata.co.uk
Middle East
HellermannTyton – UAEEmail: info@HellermannTyton.aewww.HellermannTyton.ae
North America
HellermannTyton – CanadaTel.: +1 905 726 1221Fax: +1 905 726 8538Email: sales@HellermannTyton.cawww.HellermannTyton.ca
HellermannTyton – MexicoTel.: +52 333 133 9880Fax: +52 333 133 9861Email: info@HellermannTyton.com.mxwww.HellermannTyton.com
HellermannTyton – USATel.: +1 414 355 1130Fax: +1 414 355 7341Email: corp@htamericas.comwww.HellermannTyton.com
South America
HellermannTyton – ArgentinaTel.: +54 11 4754 5400Fax: +54 11 4752 0374Email: ventas@HellermannTyton.com.arwww.HellermannTyton.com.ar
HellermannTyton – BrazilTel.: +55 11 4815 9000Fax: +55 11 4815 9030Email: vendas@HellermannTyton.com.brwww.HellermannTyton.com.br
Asia-Pacific
HellermannTyton – AustraliaTel.: +61 2 9525 2133Fax: +61 2 9526 2495Email: cservice@HellermannTyton.com.auwww.HellermannTyton.com.au
HellermannTyton – ChinaTel.: +86 510 8528 2536Fax: +86 510 8528 2731Email: cservice@HellermannTyton.com.cnwww.HellermannTyton.com.cn
HellermannTyton – Hong KongTel.: +852 2831 9090Fax: +852 2832 9381Email: cservice@HellermannTyton.com.hkwww.HellermannTyton.com.sg
HellermannTyton – IndiaTel.: +91 120 413 3384Email: cservice@HellermannTyton.co.inwww.HellermannTyton.co.in
HellermannTyton – JapanTel.: +81 3 5790 3111Fax: +81 3 5790 3112Email: mkt@hellermanntyton.co.jpwww.HellermannTyton.co.jp
HellermannTyton – Republic of KoreaTel.: +82 32 833 8012Fax: +82 32 833 8013Email: cservice@HellermannTyton.co.krwww.HellermannTyton.co.kr
HellermannTyton – PhilippinesTel.: +63 2 752 6551Fax: +63 2 752 6553Email: cservice@HellermannTyton.com.phwww.HellermannTyton.com.ph
HellermannTyton – SingaporeTel.: +65 6 586 1919Fax: +65 6 752 2527Email: cservice@HellermannTyton.sgwww.HellermannTyton.com.sg
HellermannTyton – ThailandTel.: +662 237 6702 / 266 0624Fax: +662 266 8664Email: cservice@HellermannTyton.co.thwww.HellermannTyton.com.sg
Africa
HellermannTyton – South AfricaTel.: +27 11 879 6600Fax: +27 11 879 6603Email: jhb.sales@Hellermann.co.zawww.HellermannTyton.co.za
HellermannTyton Data Waterside House, Edgar Mobbs Way Northampton NN5 5JE United Kingdom Tel: +44 (0) 1604 706633 Fax: +44 (0) 1604 705454Email: sales@htdata.co.uk www.htdata.co.uk BR
O-Z
C-R
11