+ All Categories
Home > Documents > PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid...

PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid...

Date post: 02-Oct-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
20
Smart Healthcare Provider PhysioLab co., Ltd. www.physiolab.co.kr PhysioLab PhysioLab As a warm Company joining Smart Healthcare & Green Provider
Transcript
Page 1: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

PhysioLab

As a warm

Company joining

Smart Healthcare & Green Provider

Page 2: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

PhysioLab has been provided to 60 colleges and companies to help

medical engineering researches and education based on

biosignal measuring technique with your supports for last 7

years.

The company keeps more focus on saving people’s lives in

emergency situations through implementing pre-hospital

remote emergency care and first aid information service

based on smart-integrated services, based on “ambulance

telemedicine system” of the National Emergency Management

Agency (NEMA) as a part of the telemedicine system.

In addition, the company commercializes various analyzers,

electrode and chemical cells to help electrochemical

research and education through cooperation with the

chemistry department of Pusan National University.

PhysioLab does its best to connect family happiness with

health and become a leader in the u-healthcare for the

healthy society.

Gi-Ryon Kim

Ph. D, President of PhysioLab

Smart Healthcare

Sensing & Measurement

based Technology

Biosignal

measurement & monitoring

Telemedicine

Ambulance emergency care

Telemedicine

Chronic disease management

Electrochemical signal

measurement & monitoring

Electrochemical analysis

system

Water quality analyzer

Environmental

Monitoring

2012 08 – Development of a first-aid information and

SMART emergency medical service system

07 – Development of the vocal cords monitoring

and tune correction system using wearable EGG

03 – Launch of 2 kinds of BME-DAQ(8ch. 24bit)

02 – Development of wearable wireless 12ch. ECG

2011 12 – Development of full digital 8ch. physiograph

11 – Development of 12ch. ECG module & board

06 – Selection of 2 kinds of Government Project.

2010 12 – Development and release of application

for android “The overseas trip guard”

10 – Expand the u-119 ambulance telemedicine

(8 cities and provinces including Seoul, Busan)

2009 10 – Development of emergency patient recognition

09 – The u-119 ambulance telemedicine (Seoul, etc.)

03 – KGMP conformity certified(patient monitor[2])

2008 08 – Server establishment for NEMA ambulance

telemedicine service

06 – KFDA certification for PT-350M(patient monitor)

2007 06 – Building up emergency medical service(Busan)

02 – Physiograph P400 CE certified

2006 09 – Development of emergency telemedicine system

01 – Industry participation in KETI Medicare IT team

2004 – APEC Exhibition(tele-monitoring system)

2003 – Development of digital physiograph

(P400/P800) and educational kit

Physiograph

(biosignal measuring system)

BME KIT series

(biosignal measurement kit)

3Ch. 12Ch. ECG

Measuring module

2005 .10 Establishment of PhysioLab co. Ltd.

Page 3: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Product Guide

Biosignal Measurement & Monitoring Electrochemical measurement

R&D Solution

Smart Healthcare Provider

BME-KIT experimental kit to train biosignal measurement

• Assembly KIT

ECG-KIT PPG-KIT EMG-KIT

• Test KIT

µDAQ-KIT SimDAQ-KIT Sim-KIT

Multi-channel Digital Physiograph

• P400 4channels biosignal measuring system

base module iDAQ-400 biosignal measuring Bio-Amp, ECG-Amp, PPG-Amp, module Bridge-Amp, EDG-Amp, Buffer-Amp

• P800 8channels biosignal measuring system

base module iDAQ-800 biosignal measuring Bio-Amp, ECG-Amp, PPG-Amp, module Bridge-Amp, EDG-Amp, Buffer-Amp Sound-Amp

ECG Module digital ECG module for R&D

• ECG – 12channel Module PSL-ECG 12MD

PSL-ECG 12BD

• ECG – 3chnnel Module (coming soon) PSL-ECG 3MD

PSL-ECG 3BD

Electrochemical analysis equipment & SW

1Channel Dissolved Oxygen Meter

Multi pH/ION Meter – 8/16 Channel

Multiscan – pH/ION Meter Operation SW

Potentiostat / Galvanostat

Multi Potentiometric Titrator – 8/16 Channel

Electrochemical sensors

Counter Electrodes(Platinum Wire Electrode)

Electrodes

Cell Vials

Cell Cover

Emergent telemedicine and first information service using smart device Wireless EGG device for monitoring vocal cords and correcting tune 12ch. wireless wearable ECG device U-Healthcare and telemedicine solution for in-home management of heart disease patient Chest belt-typed multiple biosignal measuring system Maritime telemedicine using Inmarsat System monitoring vitals and tracking site of firefighter Simulator for syringe pump

R&D sponsored by the Korean Government

Ambulance emergent telemedicine of NEMA

ECG remote monitoring for heart disease management

Telemedicine and information based on smart device

Android-based remote monitoring of biosignal

Solution

Anesthetic depth analyzer

Portable biosignal measuring system(suitcase)

R&D equipment for measuring various biosignal

R&D for on-demand equipment

Online sale www.devicemart.co.kr Home>Brand market>PhysioLab

Product Guide

Assembly KIT for ECG measurement Assembly KIT for PPG measurement Assembly KIT for EMG measurement

ADC & PC monitoring(via. USB) µDAQ-KIT & smart simulator Kit for generating standard signal

12ch. ECG digital module 12ch. ECG demo board & PC monitoring

3ch. ECG module 3ch. ECG demo board & PC monitoring

Page 4: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

BME-KIT Series ECG-KIT

PPG-KIT

Item Details

Signal Electrocardiogram(ECG), beat

Dimensions 120mm(W) * 100mm(L) * 25mm(H)

Input power [basic] 6V(3V*2ea), coin-type lithium battery [additional] Auto supply through uDAQ-KIT

Selector Reference, Notch, HPF, Amplification, LPF

Test point 8 points(stages output of signal processing)

I/O connector linked to external device

Additional LED lights when beats are detected

Beat

Notch Filter

(reject 50/60Hz)

High Pass Filter

(reject low frequency

noise)

Inverting

Amplifier (amplification)

Low Pass Filter

(reject high

frequency noise)

Peak Detection (heart beat detection)

TP3 TP4 TP5

TP6 TP8

Notch Sel. HPF Sel. Amp Sel.

Ref Sel. LPF Sel.

Semi Differential (preprocessing for

peak detection)

TP7

Ref

+

Input

-

Input

Right Arm

Left Arm

Left Arm

(Right Leg)

Beat

Instrumentation

Amplifier (ⅹ21)

RLD

(Right Leg-Driven) ( robust to motion

artifact)

TP2

TP1 ECG

Assembled ECG-KIT

ECG-KIT contents

ECG-KIT

Features

• easy to assemble

• measurement ECG & heart beat

• 8 stage’s outputs of signal processing

• selectable amplification and filter

• using dry electrodes or lead cable

Educational and training kit which is

assembled directly, measures ECG

signals from the human body and

outputs analog signals through

amplification and filtering

Specification

Functional Block Diagram

Beat

Current to

Voltage

conversion

High Pass Filter (reject low frequency

noise)

Amplifier

(amplification)

Peak Detection (pulsation detection)

TP2 TP3 TP4 IVC Sel. HPF Sel. Amp Sel.

LPF Sel.

Probe Sel.

Comparator

TP8

Sensor & Driver (selectable internal

/external sensor)

Low Pass Filter (reject high

frequency noise)

TP1

TP5

Assembled PPG-KIT

PPG-KIT contents

PPG-KIT

Features

• easy to assemble

• measurement PPG & pulse

• 8 stage’s output of signal processing

• selectable amplification and filter

• using fingertip-typed PPG sensor

Educational and training kit which is

assembled directly, measures PPG

signals from the finger and outputs

analog signals through amplification

and filtering

Specification

Funtional BlockDiagram

Rectifier

TP6 Pulsation

Reference signal

Item Details

Signal Photoplethysmogram(PPG), pulsation

Dimensions 120mm(W) * 100mm(L) * 25mm(H)

Input power [basic] 6V(3V*2ea), coin-type lithium battery [additional] auto supply through uDAQ-KIT

Selector Reference, Notch, HPF, Amplification, LPF

Test point 8 points(stages output of signal processing)

I/O connector linked to external device

Additional LED lights when pulsation are detected. Selectable probe(internal-default, external) Adjustable IVC sensitivity

PPG signal

parts PCB

manual

part PCB

manual

Educational and experimental KIT

for medical engineering and

electronic engineering

TP7

Assemble KIT for ECG measurement and education

Assemble KIT for PPG measurement

Page 5: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

BME-KIT Series EMG-KIT

Item Details

Signal EMG, contractile force detection

Dimensions 120mm(W) * 100mm(L) * 25mm(H)

Input power [basic] 6V(3V*2ea), coin-type lithium battery [additional] auto supply through µDAQ-KIT

Selector reference, notch, HPF, amplification, LPF

Test point 8 points (stages output of signal processing)

I/O Connector linked to external device

Additional LED lights when contractility is detected

Contractility

Notch filter

(reject 50/60Hz)

High Pass Filter (reject low frequency

noise)

Inverting

Amplifier

Low Pass Filter

(reject high

frequency noise)

TP2 TP3 TP4

TP5

Notch Sel. HPF Sel. Amp Sel.

LPF Sel.

Ref

+

Input

-

Input

Instrumentation

Amplifier (ⅹ21)

Signal Ground

(SG)

TP1

Assembled EMG-KIT

EMG-KIT contents

EMG-KIT

Features

• easy to assemble

• measures EMG and its detection

• 8 stages output of signal processing

• selectable amplification and filter

• measures using lead cable

Educational and training kit which is

assembled directly, measures EMG

signal from the human body and

outputs analog signals through

amplification and filtering

Specification

Functional Block Diagram

part PCB

manual

Sim-KIT

Item Details

Dimensions 60mm(W) * 80mm(L) * 30mm(H)

Output biosignal : ECG, PPG Wave test signal : 60Hz notch, calibration

Resolution 10bit DAC

Support Directly connect with assemble KIT series

Power

operating DC 3.3V

battery Lithium polymer 500mA /1cell

charger Standard mobile phone charger (24pin), 600mA, DC 4.2V

Sim-KIT photos

Sim-KIT contents

Sim-KIT

Features

• actual ECG and PPG from human

• 60Hz sine and calibration signal

• automatically recognizes the kind of

assemble KIT(ECG-, PPG-KIT)

• provides biosignal suitable for the KIT

Test KIT which provides standard bio-

and reference signal to evaluate and

check whether the assembled kit are

suitably assembled and operate

normally. (assemble kit only)

Specification

Block Diagram

manual charger main body

µDAQ-KIT

Generating

standard signal

biosignal

processing

monitoring

biosignal

ADC & PC interface

Monitoring

biosignal

through PC SW

Oscilloscope

Evaluation Solution

for hands-on biosignal

processing

USB

EMG signal

Contractile

Threshold

EMG Envelop

Extraction Muscle

Contraction

Force Detector

TP6

Comparator

TP7

TP8

Assemble KIT for EMG measurement

Simulator generating standard signal to

test assemble kit

Page 6: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

High performance ADC and isolation power embedded

8Ch. 24bit ADC

BME-DAQ(Data Acquisition Device)

Feature and function

USB

(signal & power)

µDAQ-KIT SimDAQ-KIT

BME-DAQ RMSW 8ch. Graph Realtime Monitoring & Review SW

Smart Simulator Simulator based on SW 8ch. 24bit DAQ 8ch. 24bit DAQ

+ Smart Simulator

Simulator + A/D conversion

µDAQ-KIT

SimDAQ-KIT

Smart Simulator (SimDAQ Only)

PC Monitoring

BME-DAQ RMSW

8Ch.

Analog

Input

USB

Bio-

signal

biosignal

biosignal processing

Assemble KIT

Experimental configure of BME-KIT using µDAQ-KIT and SimDAQ-KIT

Simulation

bio-signal Smart Simulator (SimDAQ Only)

Simulator + A/D conversion

µDAQ-KIT

SimDAQ-KIT

Smart Simulator (SimDAQ Only)

PC Monitoring

BME-DAQ RMSW

8Ch.

Analog

Input

USB

Smart

Simulation

Bio-Signal Smart Simulator

(SimDAQ Only)

Gen

der

Signal

Output

VCC

GND

user-

developed

board (biosignal/sensor)

Signal

Input

Smart Simulation Signal 6.5V(@50mA)

,10V(@0mA)

CH1~CH8(0~5V signal)

Experimental configure of universal DAQ using µDAQ-KIT와 SimDAQ-KIT

• 8 channel, input range of 0~5V

• 24bit ADC

• crosstalk between channels ≤-75dB

• USB interface

• general 8 channels input gender

• automatic recognition of assemble kit

• isolation power

• supply DC 5V through USB

• realtime monitoring through BME-DAQ RMSW

• selective digital filter of notch, HPF, LPF

• realtime graph display of 8 channels data

• save 8 channels data

• review the saved data

• conversion saved data to text file

(application : notepad, Excel, Matlab)

• Even small signal of 1mV can be observed.

H/W (common) S/W (common) Smart Simulator(SimDAQ-KIT)

• generate ECG, PPG, EMG signals

• plan to update EEG, EDG signals

• generate test signals such ad sine, triangle,

square wave for testing

• adjust the size and speed of signal

• synthesize biosignal and test signal

• adjust the offset and duty ratio of signal

• display a reverse graph of signal, if necessary

PC-based monitoring and simulation

Page 7: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Application

Item Qty Note

1. µDAQ-KIT or SimDAQ-KIT body 1 selectable

2. DAQ gender 1 -

3. BME-DAQ RMSW (device license is embedded in

body) 1 CD

4. USB cable 1 USB cable

5. µDAQ/SimDAQ-KIT manual 1 including pdf

file(CD)

µDAQ-KIT body SimDAQ-KIT body

DAQ gender USB cable manual

Device contents

BME-DAQ RMSW

select

recognize ECG-KIT

automatically

SimDAQ-KIT ECG-KIT

direct connecting

(signal + power)

USB

Smart Simulator

Smart

Simulator

Signal

BME-DAQ RMSW

ECG-KIT test using Smart Simulator of SimDAQ-KIT

Measurement of speaker vibration and magnetic reaction using uDAQ-KIT connecting with DAQ gender

PWR

GND

CH1 Speaker

470uF

8K

2K

ECG signal + 60Hz Sine wave

ECG signal + 60Hz sine signal simulation

Measurement of vibration Measurement of sound pressure Measurement of magnetic reaction

8Ch. 24bit ADC

BME-DAQ(Data Acquisition Device)

High performance ADC makes developer simply evaluate

a small sensor’s output without additional amplifier

assembly and measurement

of biosignal processing circuit easy to connect

to the device

apply various simulation signals &

monitor and evaluate measured signals

Page 8: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

12Ch. ECG solution

R L

` N

C6

C5

C4

C1 C2

C3

F

USB

RS232

Bluetooth

Realtime Monitoring 12Ch. ECG & Temperature

10Lead cable

PSL-ECG 12MD PSL-ECG 12BD

(12ch ECG module) (12ch ECG demo board)

Software for Windows OS

Digital Notch Filter

Register Setting

(ECG chip register in the

PSL-ECG 12MD can be

changed)

Software for Android OS

Before

12Ch. ECG

Realtime Graph

After

For Android OS

※ PhysioLab pursues open cooperation policies about solutions and

related dll for monitoring SW.

Comparison with other manufacturers’ products

Screen capture and menu

of actual Galaxy Tab(7-inch)

The world’s first and only solution

12Ch. ECG

Realtime Graph

ECG signal Test signal Save

Offset

setting Reconnect Quit

Signal (ECG/Temperature /Offset/Test)

Communication (USB/Serial/Bluetooth)

Sampling Rate (250 ~ 4,000 SPS)

Option Setting (Digital Filter/Offset Remove, Data Save)

Digital Filter

Change to Review Screen

Register Setting

Item PSL-ECG 12BD Other products

Realtime Display Yes No

High Resolution /Low Power Mode

Yes Low Power Only

Digital Filtering 250/500/1k/2k/4k SPS 500 SPS Only

Serial Comm. Yes No

USB Comm. Yes Yes

Bluetooth comm. Yes No

Windows XP/Vista/7 Yes Windows XP Only

Android App. Yes No

Isolation power Yes Not confirm

General MCU YES(Cortex M3) DSP by themselves

12Lead Cable Yes Optional

For Windows OS

Page 9: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

PSL-ECG 12MD

PSL-ECG 12MD

Features

• 12 ch. ECG module

• high resolution through 24bit ADC

• CMRR ≤-105dB

• sampling rate 250 ~ 32k SPS

• embed overvoltage protection circuit and

anti-aliasing LPF inside IC input

• SPI communication

• built-in ADS1298 chip of TI

PSL-ECG 12MD module is a perfect front-end module to form a 12-channel ECG circuit, embed

overvoltage protection circuit and LPF filter inside the IC input, as well as analog signal

conditioning and 24bit ADC for ECG signal process. Also, it is an optimal module to form 12-

channel ECG circuits by adjusting amplification degree and CMRR of -105dB.

Block Diagram

Optimum module for configure 12 channels ECG circuit

24bit

ADC

PSL-ECG 12MD

27㎜

Micom SPI

12Lead

ECG

Cable

OVP

(Over Voltage

Protector)

LPF EMI

Filter MUX

ECG

AMP/Filter Micom

Operation Voltage : 2.7~3.6V (Recommend : 3.3V)

12Lead

Cable

PSL-ECG 12BD

PSL-ECG 12BD

Features

• demo board for monitoring realtime 12

channels ECG

• board interfaced with PSL-ECG 12MD

• ECG, Temperature, Test, Offset Signal

• USB, RS232, Bluetooth communication

• ARM Cortex M3 MCU

• isolation power

PSL-ECG 12BD product is an optimal one to test 12-channel ECG by combining PSL-ECG

12MD module and provides PSL-ECG 12BD board, 10Lead Cable, communication cables and

real-time 12-channel ECG monitoring software. The communication mode for real-time

monitoring on the PC supports USB, serial and bluetooth for tailor-made tests on user

applications. Also, Android-based real-time monitoring app is provided.

BlockDiagram

Realtime 12 channels ECG demo board

PSL-ECG 12BD

12Lead

Cable

Isolator

Bluetooth

ECG

Select S/W

Power

RS232

USB

Power S/W Isolator

PSL-ECG 12MD Micom

• realtime monitoring SW

– for Windows & Android O/S

• 12 lead cable

PSL-ECG 12MD

PSL-ECG 12BD

PSL-ECG 12BD contents

module manual

PSL-ECG 12MD contents

body + module

SW manual

electrodes 12Lead / Serial / USB Cable

Page 10: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Physiograph P400 Equipment for measuring various biosignals

ADC

ADC

ADC

ADC

MCU

Regulated Power

EDG -Amp

Buffer - Amp

USB

Interchangeable module

Base module iDAQ400

ECG -Amp

PPG -Amp

Bridge -Amp

Bio -Amp

ECG EOG EMG EEG

ECG Beat BPM

PPG BPM PTT

Pressure Grip

Strength

SCR SCL

Analog Input

PC(Software) Configure selectively up to 4ch. biosignal measuring module

Digital physiograph which measures various biosignals including electrical and physical signals from human body

Converts biosignal to digital signal and transmits to the PC through iDAQ-400

Configure up to 4 biosignal measuring modules and measure simultaneously them

Modules are easily assembled / separated with iDAQ-400 (plug-in type)

<base module>

ㆍ iDAQ-400 : Convert analog signals from up to 4ch biosignal measuring module

to digital signals and transmit to the PC (default module)

<biosignal measuring module (amplifier)>

ㆍ Bio-Amp : bioelectricity signals including ECG, EMG, EEG and EOG

ㆍ ECG-Amp : ECG waves, BPM and Beat signals

ㆍ PPG-Amp : photoplethysmogram(PPG), BPM, pulse transit time(PTT)

ㆍ Bridge-Amp : sensor output formed with bridge-circuit like pressure, force

ㆍ EDG-Amp : electrodermal activity (SCL/SCR)

ㆍ Buffer-Amp : output from external analog device

Isolation Power

Isolation Power

Isolation Power

Isolation Power

Isolation Power

Isolation Power

Isolation Power

P400 Digital Physiograph

BlockDiagram

ㆍ Cardiovascular system monitoring Measure ECG, pulse wave(PPG), heart rate (BPM) and pulse transit time(PTT)

[configuration] iDAQ-400, ECG-Amp(2), PPG-Amp(2)

ㆍ Electroencephalogram monitoring Measure alpha wave form EEG(occipital)

[configuration] iDAQ-400 Bio-Amp(1)

ㆍ Vector ECG(2D) monitoring Measure electrical activity of heart

[configuration] iDAQ-400 Bio-Amp(1) ECG-Amp(1)

ㆍ ECG and respiration monitoring Observe respiratory pattern through BPM

[configuration] iDAQ-400 Bio-Amp(1) ECG-Amp(1)

ㆍ Electrooculogram monitoring Measure eye movement

[configuration] iDAQ-400 Bio-Amp(2)

ㆍ Electrodermal activity monitoring Measure SCL(DC), SCR(AC)

[configuration] iDAQ-400 EDG-Amp(1)

ㆍ Photoplethysmogram monitoring Measure pulse wave at the finger

[configuration] iDAQ-400 PPG-Amp(1)

ㆍ EMG and muscle contractility Measure EMG according to muscle contractility

[configuration] iDAQ-400 Bio-Amp(1) Bridge-Amp(1)

• P400 body

• PC monitoring SW

• Electrode / sensor

• Power adapter

• manual

P400 contents

Application

Page 11: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Physiograph P800

measures various biosignals including electric and physical signals from human body

Simultaneously records and analyzes realtime biosignals with various configurations up to 8 channels

Builts-in 24bit ADC to improve accuracy and precision in each measuring module

Decreased crosstalk compared to analog devices by adopting digital amplifier modules for biosignal measurement

Control measurement options through the monitoring software, P800 RMSW

The biosignal measuring module is formed with card slots for each attachment / detachment

<base module>

ㆍ iDAQ-800 : Convert analog signals from up to 8ch biosignal measuring module

to digital signals and transmit to the PC (default module)

<biosignal measuring module (amplifier)>

ㆍ Bio-Amp : bioelectricity signals including ECG, EMG, EEG, EOG

ㆍ ECG-Amp : ECG waves, BPM and Beat signal

ㆍ PPG-Amp : photoplethysmogram(PPG), BPM, pulse transit time(PTT)

ㆍ Bridge-Amp : sensor output formed with bridge-circuit like pressure, force

ㆍ EDG-Amp : electrodermal activity (SCL / SCR)

ㆍ Sound-Amp : heart / pulmonary sound(mode : Diaphragm, Bell, Wide )

P800 Digital Physiograph

Equipment for measuring various biosignals

Control Measure-ments

ECG, EOG EMG, EEG

24Bit ADC

CoreTex M3

ECG, EOG EMG, EEG

24Bit ADC

CoreTex M3

USB 2.0 Selectively configure 8 channel amplifiers depending on your purposes and usages (an example of recent delivery below)

The figure above is a part of measurement screen and is possible to measure biosignals like the example of P400

ECG,Beat BPM

24Bit ADC

CoreTex M3

PPG,BPM PTT

24Bit ADC

CoreTex M3

PPG,BPM PTT

24Bit ADC

CoreTex M3

SCR, SCL

24Bit ADC

CoreTex M3

Pressure Force

24Bit ADC

CoreTex M3

Diaphram Bell, Wide

24Bit ADC

CoreTex M3

Mother Board

iDAQ800

Bio-Amp Bio-Amp ECG-Amp PPG-Amp PPG-Amp EDG-Amp Bridge-Amp Sound-Amp

8Ch. UART Control

Digital Channel Amp

Power(AC220V In DC 12V Out)

USB Driver Audio Amp

P800 RMSW-Control screen (automatically recognize amplifiers for

each channels on the body)

P800 main body (configure 8 channel amplifiers)

ㆍCardiovascular system monitoring

ㆍEEG monitoring (α wave)

ㆍVector ECG monitoring

ㆍEMG & muscle contractility

P800 main body

• P800 main body

• PC monitoring SW

• Lead cable & sensor

• USB & power cable

• manual

P800 contents

Page 12: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Realtime Monitoring 12ch. ECG Signal

Software for Windows OS

Realtime monitoring

USB communication (for Windows OS)

Bluetooth communication

Save data

Load data (only for Windows OS)

Setting internal registers of ECG module (only for Windows OS)

Software for Android OS

For Android OS

12Ch. ECG Realtime Graph

R L

` N

C6

C5

C4

C1 C2

C3

USB

Bluetooth

Bluetooth

For Windows OS

F

Single Line Multi Lead Cable

12Ch. ECG Realtime Graph

Data Load View

12Ch. ECG Realtime Graph

front back side

Size : 65x115x13

12ch. wireless wearable ECG

Register setting of ECG module

single line multi lead cable (4Lead / 6Lead)

Lead cables for 12ch ECG

Monitoring Software for 12 channels wireless wearable ECG

12ch. Wireless Wearable ECG

PSL-ECG 12PD

PSL-ECG 12PD

Page 13: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Vocal cords status monitoring software EGG

Tune monitoring & correction software

*quotation : KBS ‘The qualities of a Man’ chorus

Realtime monitoring of individual pitches

PhysioLab

Wireless

Electroglottograph

Wi-Fi

PhysioLab

TCP/IP

As the world's first wireless wearable EGG device, it measures electrical impedance across the vocal cords according to the opening and closing of glottis on vocalization and transfers it to PC through Wi-Fi wireless communication to monitor the status of vocal cords

Features

• Wearable EGG(Electroglottogram)

• Frequency bandwidth 10 ~ 5,000Hz

• Embeds 24bit ADC of high resolution

• Sampling rate 20kSPS

• Wireless communication through Wi-Fi network

• Lithium-polymer battery (more than 4 hours of continuous use)

• Charge via USB W-EGG Device

EGG

Wireless Wearable EGG Device

Page 14: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Smart Emergent Telemedicine and First-aids Information Service

Patient monitor

Bluetooth

Service for paramedics Service for remote doctor

Smart app. for supporting first-aid activity

Smart app. for supporting telemedicine

voice biosignals photo Patient status First-aid record

Android-based smart phone or tablet

Smart Emergent Telemedicine Server

[Paramedic waiting screen]

try telemedicine

[Accessed remote doctor list] [Doctor waiting screen]

select a doctor in the list popup – telemedicine request

[Smart device for doctor]

Convenient Smart Emergent Telemedicine Procedure

measure biosignals from patient

monitoring biosignals & basic Information of patient

accepts telemedicine request

[telemedicine screen of paramedic] [telemedicine screen of doctor]

remote monitoring of biosignals & information of emergent patient

emergency care instruction by a specialist

improvement of patient’s survival rate in pre-hospital stage

3G, 4G, Wi-fi Network

Simultaneously telemedicine and voice call

3G, 4G, Wi-fi Network

3Lead ECG Graph

NIBP, Pulse Respiration,

Temperature, SpO2

Patient status, basic information Photo service

of diseased part

First-aid record service interworking

Smart Emergent Telemedicine Information

Mobile Internet

Android-based smart phone or tablet

Page 15: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Ambulance telemedicine

NEMA

Ambulance Emergent Telemedicine

& Patient Recognition System

HSDPA 3G Network Mobile

Base Station

Internet

Biosignal(ECG, NIBP, SpO2, Resp.)

Image, photo, voice

Ambulance

Sever Transmit the patient information

Receive the medical guide

Hospital

Video(image), voice, prescription

Transmit the medical guide

Receive the patient information

Biosignal/video/voice (image)

Sever

Pre-hospital emergent telemedicine to improve the survivability of patient

A system to achieve medical guides from doctors at remote places during delivering emergency patients to the hospital

Transmit biosignals, video(image) and voice of the patient from a ambulance

Guide telemedicine from doctors at remote place(hospital) through PC

NEMA emergent telemedicine solution

2010 - 75% of market share (No. 1) - Expand to build 119 ambulance telemedicine

2009 - Build the u-119 ambulance telemedicine - Develop emergent patient recognition system

2008 - Join in building NEMA telemedicine server

Software screen

Ambulance telemedicine system

The first builder in Korea

Domestic highest share(No.1)

Best teleconference SW

Only one player in Korea

- Apply to general ambulance

- Support patient recognition

- Wi-Fi network in ambulance

- Dual communication of video/voice

Smart Telemedicine Solution

ECG

Blood Pressure

SpO2

Respiration

Pulse

Glucose

Body Weight

Biosignal Sever Solution

Client Model

Internet Internet

Adaptive Realtime Video Transmission ( H.264(Video) SpeeX(Voice) Jpeg(Image) )

Video Teleconference RTP Sever Solution

Tablet

Portable telemedicine

Visiting care Emergency site Disaster site Sport field

Home monitoring

Home-Care (ECG, SpO2 NIBP, Pulse Respiration)

Mobile wearable ECG service

For a heart disease patient, mobile ECG monitoring

Chronic disease management

Blood Glucose Blood pressure Obesity Healthcare

Doctor View Realtime biosignal monitoring

Realtime video/voice transmission

Patient charts management & remote counseling

Chronic disease management & Heath care

Anytime, Anywhere service for doctors and clients

Optimization model for the client environment

Supports Smart Mobility (mobile for Android, Windows)

Simultaneously supports wire & wireless network (Adaptive transmission rate according to network speed)

Page 16: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Multi Potentiometric Titrator

The potentiometric titration is a method which analyzes concentration of sample

by measuring the potential difference from concentration changes of the analyzed

material and consists of indicator electrode and reference electrode. The

multichannel pH/ION meter for the titration is one device to monitor for a long

time from multiple users and has very large impact on education.

Specification

• pH Range -2.00 to 19.999 pH Resolution 0.005 pH Relative Accuracy 0.01 pH

• mV Range 0 ~ ±2000.00 mV Resolution 0.1 mV Relative Accuracy ±0.1 mV

• Temperature Range -55 to 125 ℃ Resolution 1 ℃ Relative Accuracy ±1.0 ℃

• ION Selection (23 ions)

8 Channel Model

configuration

16 Channel Model

Features

• 8/16 Channel Input

• LCD Display

• MultiScan Support

With Computer Monitor

• RS-232 Interface

• Auto Temperature Compensation

• Auto Calibration(1~5 Point)

• Compatible with any Type of Ph & ISE

• Power Supply AC 220V/1A

• Measure all the positive/negative ions and dissolved air detected by ISE

• Configure up to 8/16 channels

• Display realtime potential change by concentration as molar concentration (ppm)

• Measure multiple ions and from various points

Deliver 16 channel F-ion meter to office of waterworks, Seoul

Multi Channel pH/ION Meter

8 Channel Multi pH/ION Meter

Specification

• pH Range -2.00 to 19.999 pH Resolution 0.005 pH Relative Accuracy 0.01 pH

• mV Range 0 ~ 2000.00 mV Resolution 0.1 mV Relative Accuracy 0.1 mV

• Temperature Range -55 to 125 Resolution 1 ℃ Relative Accuracy 1.0 ℃

• ION Selection (23 ions)

Features

• 8 Channel Input

• LCD Display

• MultiScan Support

(With Computer)

• RS-232 Interface

• Auto Temperature

Compensation

• Auto Calibration(1~5 Point)

• Compatible with any Type

of Ph & ISE

• Power Supply AC 220V/1A

8Channel Model

16 Channel Multi pH/ION Meter

Specification

• pH Range -2.00 to 19.999 pH Resolution 0.005 pH Relative Accuracy 0.01 pH

• mV Range 0 ~ 2000.00 mV Resolution 0.1 mV Relative Accuracy 0.1 mV

• Temperature Range -55 to 125 Resolution 1 ℃ Relative Accuracy 1.0 ℃

• ION Selection (23 ions)

Features

• 16 Channel Input

• LCD Display

• MultiScan Support

(With Computer)

• RS-232 Interface

• Auto Temperature

Compensation

• Auto Calibration(1~5 Point)

• Compatible with any Type

of Ph & ISE

• Power Supply AC 220V/1A

16Channel Model

Page 17: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Compact Potentiostat/Galvanostat – Mini Stat

Mini Size, USB, 1 Channel Potentiostat/Galvanostat for education of electrochemistry

Features

• Mini size(Handheld size)

Potentiostat/Galvanostat

• Training in electrochemistry

• USB comm. & power

• 3Line cell cable

• Current measuring techniques

Cyclic voltammetry

Chrono amperometry

Stripping voltammetry

Linear sweep voltammetry

Specification

• Applied voltage range ±2V

• Voltage resolution 0.1mV

• Current range 100nA ~ 1mA

• Current 4 ranges selectable

±1mA, ±100uA, ±10uA, ±100nA

• Resolution 0.05% of the current

measurement range

• USB 2.0 communication

• DC 5V (USB Power)

• Windows XP, Vista or 7, Android

(Notice) This device will be released in the near future as a product. The appearance and specification of actual product can differ from those of above mentioned. Be sure to check them before buying a product.

Training in electrochemistry

• Practical courses for students

• Demonstration experiments

Research and development

• Sensor development

• Reversibility of electrochemical reaction

Potentiostat/Galvanostat

1/4/8/16 channel Potentiosta/Galvanostat

Features

• 1/4/8/16 Channel Input

• RS-232 Interface

• Size W250·L250·H150(㎜)

• Power Supply AC 220V/1A

1Channel Model

4Channel Model

16Channel Model

Mini Stat

Trainining for

electrochemistry

SW for Windows OS SW for Android OS

PC SmartPhone

USB Bluetooth

Technique

• Cyclic voltammetry, Linear sweep voltammetry

• Stripping voltammetry, Chronoamperometry

• Differential pulse voltammetry, Chronocoulometry

Specification

• Max. output current 500mA

• Applied voltage range ±5V

• Reference input impedance

<1011ohm

• Slew rate 10V/us minimum

• Rise time <2 us ±0.1mV

• Current Range 10nA ~ 500mA

• Absolute accuracy 0.1%

• Resolution 0.05% full scale

Page 18: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Electrodes & Electrochemical Cells

Counter Electrodes(Platinum Wire Electrode)

10㎜

50㎜

20㎜

50㎜

20㎜

50㎜

Electrodes

KSWE-500 KSWE-501 KSWE-502

10㎜

70㎜

5㎜

• KSRE-400 Ag/AgCl(Sat’d KCI) with Vycor Tip

• KSRE-401 Ag/Ag+(0.1 M AgNO3) -Non-aqueous

• KSGC-100 Glassy Carbon Electrode (0.1㎜ ~ 10㎜ dia.)

10㎜

80㎜

6, 8㎜

• KSPT-200 Platinum Electrode (0.1㎜ ~ 10㎜ dia.)

• KSAU-300 Gold Electrode (0.1㎜ ~ 10㎜ dia.)

Cell Vials

L2

L1

• Pyrex Cell KSPC-101(L1 : 23㎜, L2 : 44㎜) KSPC-103(L1 : 23㎜, L2 : 32㎜) ※ size on demand

L2

L1

• Pyrex Cell KSPC-102(L1 : 23㎜, L2 : 44㎜) KSPC-104(L1 : 28㎜, L2 : 55㎜) ※ size on demand

Cell Cover

• KSCC-501(L1 : 50㎜, L2 : 15㎜) ※ size on demand

• KSCC-502(L1 : 60㎜, L2 : 20㎜) ※ size on demand

Dissolved Oxygen Meter

Dissolved Oxygen Meter

Specification

• Oxygen Range 0 ~ 20 ppm

• Response Time 10 Sec. for 90% of Reading

• Temperature Range -5 to 100

Features

• 1 Channel Input

• LCD Display

• Computer Monitor Display

with DOScan

• RS-232 Interface

• Auto Calibration

• Power Supply AC 220V/1A

The company commercializes various analyzers,

electrode and electrochemical cells to help

electrochemical research and education through

cooperation with the chemistry department of

Pusan National University(Kosentech).

These products can be purchased only through

PhysioLab. Visit our web site(www.physiolab.co.

kr) or Kosentech web site (www.kosentech.co.kr)

to get further information about products.

You can also leave questions by following e-

mail ([email protected])

Page 19: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Intellectual & Industrial Property

Categories Title Reg. No. Reg. Date

Intellectual Property

Patent A portable medical equipment for measuring physiological signal

10-0894545 2009.07.15

Patent Method and apparatus for pulsation detection 10-0681387 2007.02.05

Patent Gait measurement method and apparatus using electronic accelerometer sensor

10-1108141 2012.01.13

Patent A tune correction device using a EGG 10-1144948 2012.05.03

Pending A digital wireless stethoscopy system for simultaneous listening for multiple users

10-2011-0101891 2011.10.06

Pending A pain monitoring device 10-2011-0078806 2011.08.08

Pending A first-aid information and emergency medical system using smart device

10-2011-0073382 2011.07.25

Pending Apparatus and method to detect cardiac arrhythmia 10-2011-0035681 2011.04.18

Pending Noise cancelling method and apparatus using electronic accelerometer sensor in the electronic stethoscope

10-2011-0010931 2011.02.08

Utility Model Kit for measuring photoplethysmogram for education 20-0411688 2006.03.09

Utility Model Electrode pad for detection of skin potential 20-0416389 2006.05.08

Utility Model Metal electrode for reduce of movement noise 20-0428059 2006.09.27

Program A Telemedicine service program 2008-01-186-002781 2008.06.08

Program A media streamer module (RTP video and voice controller)

2009-01-199-000218 2009.01.15

Program A biosignal graph display module 2009-01-186-000217 2009.01.05

Industrial Property

Trade mark ‘PhysioLab’ 41-0120117 2005.08.22

Certification P400 CE EN 61326 BWS-07-EC-0022 2007.02.16

Certification medical device approval (Patient Monitor) by KFDA 08-472 2008.07.17.

Certification KGMP by KFDA KTL-AA-090121 2009.04.13

(2012.10.12 현재)

INNO-Biz, Research Institute, factory registration

Page 20: PhysioLabphysiolab.co.kr/Mobile_eng/PDF_Download/eng/Catalog...08 – Development of a first-aid information and SMART emergency medical service system 07 – Development of the vocal

Smart Healthcare Provider PhysioLab co., Ltd.

www.physiolab.co.kr PhysioLab

Busan Techno-Park Suite 411, #138-2, Eomgung-Dong, Sasang-Gu, Busan, 617-030, Korea Tel. 051-325-2868 Fax. 051-325-2869 www.physiolab.co.kr/Eng_New/ [email protected]

Health & Green

PhysioLab co., Ltd. PhysioLab


Recommended