The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
PROGRAMME
DAY 1 - MONDAY 1ST JUNE 2020
Time Activity
8:15 AM – 8:30 AM Registration
8:30 AM – 8:45 AM Opening Remarks/Welcoming Messages
• Prof. Boppana V. Chowdary, Chair
• Prof. Edwin I. Ekwue, Patron
8:45 AM – 9:00 AM Message and Acknowledgement of Sponsors
• Prof. Raffie Hosein, Technical Programme Chair
Session - 1 Presentations | Moderators: Prof. Raffie Hosein & Dr.
Dhurjati Chakrabarti
(Paper Title, Presenting Author)
9:00 AM – 9:15 AM Microbial Fuel Cell: An Alternative Energy Source for the
Caribbean (A08), Roshan Ramoutar
9:15 AM – 9:30 AM Microstructural Characterisation for Polycrystalline Nickel (E37),
Srihari Dodla
9:30 AM – 9:45 AM Comparative Study on Analysis of Telecom Towers Using India and
American Standards (B32), Srinivas Tanuku
9:45 AM – 10:00 AM Computation of One Dimensional One Phase Stefan Problems
(E05), V.G. Naidu
10:00 AM – 10:15 AM Developing Network Models of Industrial Symbiosis (A14),
Therese Lee Chan
10:15 AM – 10:30 AM The Underwater Trajectory Behaviour of Heavy Oil Jet in Cross-
Flow from a Broken Surface Pipeline (B29), Portia Felix
10:30 AM – 10:45 AM The Production of a Dried Avocado (Persea Americana) Powder
(A10), Saheeda Mujaffar
10:45 AM – 11:00 AM Two-Dimensional Mathematical Model of Flows in Thin Film
Composite Membranes (A13), Aatma Maharaj
11:00 AM – 11:15 AM Modeling Turbulent Bubbly Flow in a Horizontal Pipeline (A23),
Dmitry Eskin
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
11:15 AM – 11:30 AM Microbial Dependent Bioresource Technology for Sustainable
Vegetable Production (A16), Marisa Khan
11:30 AM – 11:45 AM Drying Behaviour of Cassava (Manihot Esculenta) Chips (A12),
Saheeda Mujaffar
11:45 AM – 12:00 PM Process Optimization for the Production of Activated Carbon Using
Waste Coconut Shell in Trinidad & Tobago (B35), Safiyyah Wahid
12:00 PM – 12:15 PM Break
12:15 PM – 12:30 PM Greetings and Acknowledgement of Sponsors
Session - 2 Presentations | Moderators: Prof. Dmitry Eskin & Dr.
Saheeda Mujaffar
(Paper Title with Presenting Author)
12:30 PM – 12:45 PM Shelf Life Study, Sensory Evaluation and Nutritive Value of Wheat
Flour/ Dasheen (Colocasia Esculenta (L.) Schott) Taro/Cocoyam
Flour Sweetbread (A03), Maltee R. Rampat
12:45 PM – 1:00 PM Optimisation of the Supercritical Fluid Extraction of Extracts from
Vetiver Roots (A17), Sharad Maharaj
1:00 PM – 1:15 PM A Guide to Increasing Equipment Reliability and Availability in
Industries in Trinidad (F06), Kishore Jhagroo
1:15 PM – 1:30 PM A Sustainable Approach to the Construction of Coastal Facilities
Through the Incorporation of Beach Sand & Brackish Water in
Concrete Production (B34), Imran Khan
1:30 PM – 1:45 PM Extraction of Sodium Alginate from Waste Sargassum: An
Optimization Approach Using Response Surface Methodology
(A09), Akeem Mohammed
1:45 PM – 2:00 PM The National Food Control System in Guyana: Evaluation of the
Current Regulatory Framework for Food Control (A07), Maya A.
Phillips
2:00 PM – 2:15 PM Unsteady MHD Poiseuille Flow Through a Porous Channel Under
an Oscillating Pressure Gradient and Uniform Suction and Injection
(A19), Judith Balkissoon
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
2:15 PM – 2:30 PM Unsteady Hydromagnetic Couette Flow Under an Oscillating
Pressure Gradient and Uniform Suction and Injection (A20),
Jennilee Veronique
2:30 PM – 2:45 PM The Development and Application of Energy and Exergy
Thermodynamic
Performance Parameters to Determine Degradation of the Major
Components of a Combined Cycle Power Plant (E38), Sennen
Matabadal
2:45 PM – 3:00 PM Phase Inversion and Viscosity in Pipe Flow (A04), Laura Edwards
3:00 PM – 3:15 PM Combined Heat and Power (CHP) System Optimization Using
Energy, Exergy and Thermodynamic Analysis Alumina Refinery
Power Plant Optimization – Two Case Studies (A21), Quamie N.
Mortley
3:15 PM – 3:30 PM Bioengineering of a Jamaican Plant to Effect Cell Cycle Arrest in
Prostate Cancer Cells and its Potential Use in Green Nanoparticles
Synthesis (A18), Sasha-Gay Wright
3:30 PM – 3:45 PM Industrial Recycle Towards Zero Discharge Alumina Refinery Case
Study (A22), Quamie Mortley
3:45 PM – 4:00 PM Closing
DAY 2 - TUESDAY 2ND JUNE 2020
Time Activity
8:15 AM – 8:30 AM Registration
8:30 AM – 8:45 AM Greetings and Opening Remarks
• Prof. Boppana V. Chowdary, Chair
8:45 AM – 9:00 AM Message and Acknowledgement of Sponsors
• Dr. Trevor Townsend, Technical Programme Chair
Session - 1 Presentations | Moderators: Dr. Trevor Townsend & Dr.
Lee Leon
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
(Paper Title, Presenting Author)
9:00 AM – 9:15 AM Mitigating Contractor Problems Experienced in the Construction
Industry of Trinidad and Tobago (B33), Derek Outridge
9:15 AM – 9:30 AM On the Forchheimer Coefficients (B05), Anton Ali
9:30 AM – 9:45 AM Development of Attenuated Energy Spectrums at X-Ray Energies
of 60 keV and 150 keV (B11), Davatee Maharaj
9:45 AM – 10:00 AM A Swash-Zone Seaward Boundary Condition for Impermeable
Beaches (B06), Anton Ali
10:00 AM – 10:15 AM Sintering of Monolayered Stainless Steel (316l) Particles for
Thermal Management Applications Using Pulsed Co2 Microsecond
Laser (E44), Aparna Chandramouli
10:15 AM – 10:30 AM Optimum Design for Cartridge Filter Cleaning Systems (E43),
Aneesha Gogineni
10:30 AM – 10:45 AM Load Capacity of Recess Foil Journal Bearings (E01), S Arokya
Agustin
10:45 AM – 11:00 AM Subsidiary Project Plan Requirements for Public Construction
Projects in Trinidad and Tobago (B23), Amrita Baal
11:00 AM – 11:15 AM Towards an Optimal Road Access for UWI, St. Augustine South
Gate (B14), Rae J. Furlonge
11:15 AM – 11:30 AM Sociodemographic Characteristics as it Relates to Travel Behaviour
in SIDS: A Case Study in Trinidad (B30), Leah Wright
11:30 AM – 11:45 AM Behaviour of High-Performance Fiber Reinforced Concrete Beam
Joints Under Seismic Loading (B21), B. Pandu Ranga Rao
11:45 AM – 12:00 PM Mode Choice Modelling of Paratransit Modes in Trinidad (B24),
Leah Wright
12:00 PM – 12:15 PM Break
12:15 PM – 12:30 PM Greetings & Acknowledgement of Sponsors
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
Session - 2 Presentations | Moderators: Prof. Ray Indrajit & Dr.
Charmaine O’Brien-Delpesh
(Paper Title, Presenting Author)
12:30 PM – 12:45 PM A Review of Recycled Concrete Aggregates as a Sustainable
Construction Material (B08), Rekha Rampit
12:45 PM – 1:00 PM Transportation Sustainability Framework (B03), Kohan Dolcy
1:00 PM – 1:15 PM The Relationship Between Value of Travel Time and Wage Rate in
Trinidad and Tobago (B04), Jevan Stephen
1:15 PM – 1:30 PM Reducing Chronic Disease Through Transportation and Built
Environment in High Crime Countries: A Review of the Literature
(B10), Katherine Agong
1:30 PM – 1:45 PM Evaluation of Wave Run-Up Predictions from Parametric Models
on Trinidad Beaches (B20), Shani Brathwaite
1:45 PM – 2:00 PM Relationship Between Compressive Strength and Modulus of
Elasticity of Self Consolidating High Performance Concretes
(SCHPCS) Incorporating GSA as SCM (B43), T.A. Buari
2:00 PM – 2:15 PM Pavenergy Research Project - Results Already Achieved and New
Developments Planned for the Years to Come (B01), Adelino
Ferreira
2:15 PM – 2:30 PM Exploration of Issues in 3D Cadastres for Trinidad and Tobago
(D10), Charisse Griffith-Charles
2:30 PM – 2:45 PM Methods of Solving Multi-Area Economic Dispatch Problems - A
Survey and Proposed Candidate SDP Approach (C10), Kolapo S.
Alli
2:45 PM – 3:00 PM Residual Strength and Post-Cracking Behaviour of Glass Wool
Fibre-Reinforced Concrete Embedded with Steel Reinforcement
(B26), Festus Olutoge
3:00 PM – 3:15 PM Sustainable Construction in Trinidad & Tobago (B37),
Leighton A. Ellis
3:15 PM – 3:30 PM Alternative Foundation Design for Temporary Housing Units (B41),
Georgeann Henry
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
3:30 PM – 3:45 PM Linking Sustainable Transport and Community Development
Transportation 2.0 in the Small Island of Tobago (B22), Julia
Kotzebue
3.45 PM – 4:00 PM Conceptual Framework for the Analysis of Shear Damage in
Foamed Bitumen Stabilised Materials (B27), Laurence
Bridgemohan
4.00 PM – 4:15 PM Aggregate Angularity Effects on Mechanical Properties of Asphalt
Concrete (B17), Lee Leon
4.15 PM – 4:30 PM Closing
DAY 3 - WEDNESDAY 3RD JUNE 2020
Time Activity
8:15 AM – 8:45 AM Registration
8:45 AM – 9:00 AM Greetings and Opening Remarks
• Prof. Boppana V. Chowdary, Chair
Session -1 Presentations | Moderators: Dr. Sanjay Bahadoorsingh &
Dr. Terrence Lalla
(Paper Title, Presenting Author)
9:00 AM – 9:15 AM Goodness of Fit of Probabilistic Models for Electric Vehicle
Charging Behaviour (C02), Letetia M. Addison
9:15 AM – 9:30 AM Smart Farming: Organic Communication Channels (OCCs) (C03),
Aaron Roopnarine
9:30 AM – 9:45 AM Low-Cost Seismic Data Acquisition System Based on Open Source
Hardware and Software Tools (C04), Arvid Ramdeane
9:45 AM – 10:00 AM Exploring Automation Strategies in the Maintenance Department of
an Oil Company (E41), Stefan Harrison
10:00 AM – 10:15 AM Description of a Simulated Environment Developed for Validating
CFS Autonomy (C18), Gerard Pounder
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
10:15 AM – 10:30 AM Feasibility of Powering Manzanilla Via a Wind Farm
(C22), Mickhal Polisher
10:30 AM – 10:45 AM Validation of a Simulated Environment Developed for Validating
CFS Autonomy (C19), Gerard Pounder
10:45 AM – 11:00 AM Improvement of Surface Characteristics of Laser Sintered Stainless
Steel 316L by Nickel Plating (E47), Andrew C. Grizzle
11:00 AM – 11:15 AM Modeling a Manufacturing Enterprise - A Systems Approach (E15),
P.S.R.K. Nageswara Rao
11:15 AM – 11:30 AM Eagleeye: Never Lose Anything at Home Again (E49),
Yemane Zewdu
11:30 AM – 11:45 AM Semi-Automated Cricket Broadcast Highlight Generation (C10),
Sahil Ramlogan
11:45 AM – 12:00 PM Machine Learning Techniques for the Detection of Unfair Pricing in
Supermarkets Across Trinidad and Tobago (C12),
Arti K. Ramdhanie
12:00 PM – 12:15 PM Break
12:15 PM - 12:30 PM Greetings & Acknowledgement of Sponsors
Session - 2 Presentations | Moderators: Dr. Graham King &
Dr Akash Pooransingh
(Paper Title, Presenting Author)
12:30 PM – 12:45 PM CUDA-Accelerated Feature Selection (C05), Jonathan Herbert
12:45 PM – 1:00 PM Applying Fuzzy QFD MCDM to Evaluate Musical Instruments
(E10), Peter Poon Chong
1:00 PM – 1:15 PM A Machine Learning Model for an Earthquake Forecasting Using
Parallel Processing (C08), Manoj Kollam
1:15 PM – 1:30 PM The Roll-Up Digital Steelpan (E08), Umesh Persad
1:30 PM – 1:45 PM A Real-World Energy and Cost Comparison Between an Electric
Vehicle and a Petrol Vehicle in the Trinidad and Tobago Context
(B40), Bhopendra Maharaj
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
1:45 PM – 2:00 PM A Review of Bias in Decision-Making Models (C14),
Peter Poon Chong
2:00 PM – 2:15 PM Case Studies in Engineering and Technology Innovation in the
Caribbean: A Focus on EduColCom and BevCom (C16), Jason
Rameshwar
2:15 PM – 2:30 PM A Simulation Framework for Controlled Critical Infrastructures
Subject to Natural Disasters (C13), Amir Mohammed
2:30 PM – 2:45 PM Smart Irrigation Estimator (E40), Aneil Ramkhalawan
2:45 PM – 3:00 PM Adoption and Development of Alternative Fuel Vehicles in Trinidad
and Tobago (B02), Kohan Dolcy
3:00 PM – 3:15 PM Autonomous Detection of Vehicular Wheel Alignment Parameters
(C24), Gerard Ragbir
3:15 PM – 3:30 PM Dispersion of a Solute in Casson Fluid Flow Under the Influence of
External Body Acceleration (C06), Ajani Ausaru
3:30 PM – 3:45 PM Developing Parallel Computing Algorithms Using GPU’s to
Determine Oil and Gas Reserves Presented in the Upstream
(Exploration) Sector (C09), Stefan Boodoo
3.45 PM – 4:00 PM RFID Tags Used in Preventative Maintenance Programme for
Motors and Generators (C11), Tracy Aleong
4.00 PM – 4:15 PM Aerial Drone to Harvest Mangoes (C21), David Edwards
4:15 PM – 4:30 PM Closing
DAY 4 - THURSDAY 4TH JUNE 2020
Time Activity
8:30 AM – 9:00 AM Registration
9:00 AM – 9:15 AM Greetings and Opening Remarks
• Prof. Boppana V. Chowdary, Chair
CLOSE OF DAY 3
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
Session - 1 Presentations | Moderators: Dr. Jacqueline Bridge & Dr.
Robert Birch
(Paper Title, Presenting Author)
9:15 AM – 9:30 AM Analysis of Nuclear Based Electric Power Generation System – An
LCA Approach (E22), N. Leela Prasad
9:30 AM – 9:45 AM Wave Analysis of a L-Beam Structure with a Blocking Mass (E09),
Johnny Tiu
9:45 AM – 10:00 AM Evaluation of a Cricket Bowling Machine with an Arm and Hand to
Deliver the Ball (E39), Ronnie Bickramdass
10:00 AM – 10:15 AM Design Complexity as a Driver for Additive Manufacturing Process
Improvement (E02), Nishkal George
10:15 AM – 10:30 AM Comparison of Four Fabrics for Filtering Turbid Water in a Two
Stage Crossflow Filter (E25), Goldie Davis
10:30 AM – 10:45 AM A Study on the Improvement of a Local Bottle Manufacturing
Operation: Deployment of Lean Principles and Discrete Event
Simulation (E24), Ezekiel Yorke
10:45 AM – 11:00 AM Numerical Study of MHD Convective Nanofluid Flows Within a
Corrugated Trapezoidal Enclosure (E30), Victor M. Job
11:00 AM – 11:15 AM Exploring Quality of Service and its Challenges at the Ministry of
Education, Port of Spain Office (E26), Cherisse S. Lashley
11:15 AM – 11:30 AM Combined Effects of Inclined Magnetic Field and Navier Slip on
Free Convective and Radiative Flow of CNT-Water Nanofluids - A
Lie Group Analysis (E33), Victor M. Job
11:30 AM – 11:45 AM A Feasibility Study for Implementation of a Smart Parking System
in Port of Spain, Trinidad and Tobago (E17), Sarah Rooplal
11:45 AM – 12:00 PM Analysis of the Cause and Effects of Part Defects in ABS Samples
Made Using Additive Manufacturing (E45), Arshad Mohammed
12:00 PM – 12:15 PM Break
12:15 PM – 12:30 PM Greetings & Acknowledgement of Sponsors
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
Session - 2 Presentations | Moderators: Dr. Ruel Ellis & Dr. Anthony
Adeyanju
(Paper Title, Presenting Author)
12:30 PM – 12:45 PM Crack Propagation and Fracture in Two Trinidadian Soils Under
Varying Peat Content During Constant Tensile Test (E34),
Robert Birch
12:45 PM – 1:00 PM Experimental and Numerical Vibration Analysis of Printed Circuit
Boards (E04), Shurland Balliram
1:00 PM – 1:15 PM Capstone Design Projects: Theory Meets Practice (E42), Raghu
Echempati
1:15 PM – 1:30 PM The Combined Effect of Magnetic Fluids with Couple Stresses,
Variable Viscosity and Velocity-Slip on the Lubrication of Finite
Journal Bearings (E35), Tyrone Dass
1:30 PM – 1:45 PM Multi-Optimization of Empirical Models for the Material Extrusion
Process (E27), Schuravi Mallian
1:45 PM – 2:00 PM Convective Heat Transfer on Stenosed Blood Flow Through
Permeable Microcirculation in the Presence of a Magnetic Field
(E32), Alana Sankar
2:00 PM – 2:15 PM Investigating the Effects of Process Parameters on the Flexural
Strength of 3D Printed Plastics (E03), Nikolai Beharry
2:15 PM – 2:30 PM A Time Study of the Pastelle Making Process: An Investigation
Aimed at Reducing Labour and Time (E46), Jeselle Gajadhar
2:30 PM – 2:45 PM The Potential for Lean Agri-Business in the Caribbean (E36),
Cilla Pemberton
2:45 PM – 3:00 PM Analysis of Educational Policies and Economic Impacts in Small
Island Nations (F04), Trishel Gokool
3:00 PM – 3:15 PM The 5th Industrial Revolution 2020 and Beyond our Wildest
Imagination (E48), Winston Suite
3:15 PM – 4:00 PM Closing
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
DAY 5 - FRIDAY 5TH JUNE 2020
Time Activity
8:15 AM – 8:45 AM Registration
8:45 AM – 9:00 AM Greetings and Opening Remarks
• Prof. Boppana V. Chowdary, Chair
Session - 1 Presentations | Moderators: Prof. Edwin Ekwue & Prof.
Kit Fai Pun
(Paper Title, Presenting Author)
9:00 AM – 9:15 AM Coupling Cellular Automata with Medalus Assessment for the
Desertification Issue (D04), Alassane Kone
9:15 AM – 9:30 AM Integrated Approach to Masters Programme Delivery in
Manufacturing and Design Engineering at UTT (F10), Dinesh
Soodeen
9:30 AM – 9:45 AM Stimulating Regional Economic Development: A Case for Informal
Science Education (F12), Ruel L.A. Ellis
9:45 AM – 10:00 AM Delayed Payments Impacts on Planned Cash Flow of Small and
Medium Contractors for a Special Purpose Company (B25), Shawn
Bissoon
10:00 AM – 10:15 AM Manufacturing Engineering Education in Trinidad and Tobago:
Review and Future Research Agenda (F03), Trishel Gokool
10:15 AM – 10:30 AM Investigation of the Watercourses and Measures to Alleviate
Flooding in the Penal/ Debe Region (B44), Jorrel Bisnath
10:30 AM – 10:45 AM Design for Protective System for Owerri 160 MVA, 132/33 kV
Substation (C17), Osita Oputa
10:45 AM – 11:00 AM The Future of Learning (F13), Janet Stewart
11:00 AM – 11:15 AM Quality Assurance and Accreditation of Engineering Programmes at
the Faculty of Engineering at The University of the West Indies, St.
Augustine Campus, Trinidad (F11), Edwin I. Ekwue
11:15 AM – 11:30 AM Survey of Current Trends in Manufacturing Engineering
Postgraduate Programmes in the UK (F02), Trishel Gokool
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
11:30 AM – 11:45 AM Experiences of Using a Single Assessment for Both Practical
Prototyping Skills and Introduction to Energy Engineering (F08),
Jorrel Bisnath
11:45 AM – 12:00 PM Examining the Processes of New Product Development and
Innovation: The K. C. Confectionery Case in Trinidad and Tobago
(F09), Amrita Mahabir
12:00 PM – 12:15 PM Break
12:15 PM – 12:30 PM Greetings
• Dr. Michael Sutherland, Technical Programme Chair
Session - 2 Presentations | Moderators: Dr. Bheshem Ramlal & Dr.
Charisse Griffith-Charles
(Paper Title, Presenting Author)
12:30 PM – 12:45 PM Transforming the Delivery of Curriculum in the Caribbean SIDS
Through Mobile Learning (F05), Alice O. Thomas-Martin
12:45 PM – 1:00 PM Returns to Field of Study in Trinidad and Tobago: A Gender
Perspective and Policy Implications (F01), Roshnie Doon
1:00 PM – 1:15 PM Performance of Coated Cutting Tools in Machining: A Review
(E11), Nageswara Rao Posinasetti
1:15 PM – 1:30 PM Compressive Strength Optimization Using IV-Optimal Design and
Open-Source 3D Printer (E21), Arshad Mohammed
1:30 PM – 1:45 PM A Geospatially Distributed E-Refugee Camp Technological
Framework for Caribbean Small Island States (D05), Keisha
Gaspard-Chickoree
1:45 PM – 2:00 PM The Sustainable Impact of Aggressive Driving in College-Aged
Drivers (D09), Turuna S. Seecharan
2:00 PM – 2:15 PM Earthwork Volumetrics with Unmanned Aerial Vehicles: A
Comparative Study (D07), Raid Al-Tahir
2:15 PM – 2:30 PM Opportunities for Transforming Informal Settlements in Caribbean
Small Island Developing States (D03), Michelle Mycoo
2:30 PM – 2:45 PM Urban Sustainability Indicators for Caribbean Small Island
Developing States (D08), Tracey C.A Beard-Sylvester
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
Faculty of Engineering, The UWI, S t . Augustine | June 1st – 5th, 2020
2:45 PM – 3:00 PM Defining Community Based Governance for Informal Housing &
Settlements Within Trinidad and Tobago (D02), Wayne Chaman
Huggins
3:00 PM – 3:15 PM BIM Implementation in the Practice of Architecture in Trinidad and
Tobago (B38), Marlon Charles
3:15 PM – 3:30 PM An Analytical Approach to GIS Analysis and Map Making Using
Open Source Software (D11), Tarick Hosein
3:30 PM – 3:45 PM Transition from Master Craftsman to Engineering Degree (F07),
Clément Imbert
3:45 PM – 4:15 PM Closing Remarks and the Way Forward
• Prof. Boppana V. Chowdary, Chair
• Prof. Edwin I. Ekwue, Patron