Date post: | 24-Dec-2015 |
Category: |
Documents |
Upload: | gavin-maxwell |
View: | 218 times |
Download: | 0 times |
© 2011 Autodesk
MA4712-P Simulation PowerTrack Working with Any CAD Format and Autodesk SimulationLuke MihelcicProduct Marketing Manager | Digital Simulation
© 2011 Autodesk
Course Outline
Welcome and Introduction Manipulation and Preparation
Simplification Tools Best Practices
Working with non-Native CAD Importing / exporting Best practices
Direct Modeling Crash course Tool Best practices
Geometry Challenges with simulation models
© 2011 Autodesk
Class Summary
Learn how multi-CAD engineering organizations are using Autodesk Simulation tools. Autodesk Inventor® Fusion allows the integration of virtually any CAD model into Autodesk Simulation.
Learning ObjectivesAt the end of this class, you will be able to: Use Inventor Fusion to manipulate and prepare simulation models Work with CAD models from virtually any system Realize the benefits of direct modeling Identify and overcome typical CAD challenges when working with various CAD
systems
© 2011 Autodesk
Welcome
Email: [email protected]: https://twitter.com/lmihelcic Facebook: http://www.facebook.com/pages/Autodesk-Simulation/134510189984528
Questions for the audience…….Do you use Inventor, Pro/E, SW, NX…..?Do you simulate?Do you simplify?Do you create simulation only models?
© 2011 Autodesk
Tools at your disposal
Simplify Fillets
Constant size Fillet or Round
Chamfers Equal length
Holes Thru holes Counter bore
Actions Delete Create favorite Select
© 2011 Autodesk
Tools at your disposal
Find Features Fillets Holes Chamfers Extrudes Revolves Patterns Mirrors
© 2011 Autodesk
Fusion Modeling Tips for Simulation
No gap No overlaps Avoid no-critical features
Fillets Chamfers Holes Close proximity features Patterns
© 2011 Autodesk
When and Why to Simplify
Run time High element count Repetitive features
Geometry Import Failure Flow only
© 2011 Autodesk
Autodesk University Session Feedback
Your feedback is very important to Autodesk.
You can complete the session survey on your mobile device, PC, or at a survey station.
Each completed session survey enters you in that day’s drawing for a free AU 2012 pass.
You can help make AU 2012 better!
Complete the AU Conference Survey at a survey station and receive an AU 2011 T-Shirt.
© 2011 Autodesk
Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2011 Autodesk, Inc. All rights reserved.