Date post: | 31-Dec-2015 |
Category: |
Documents |
Upload: | griffin-simmons |
View: | 221 times |
Download: | 0 times |
© 2012 Autodesk
Fabricating Sheet Metal
William GrahamInventor Designer
© 2012 Autodesk
Class Summary
Sheet metal design does not end after a 3D model has been created. Digital models must be fabricated. It is during this transition from design to manufacturing that many companies lose their way. The format required by the manufacturing floor takes into account available brake presses, punching and cutting tools, and computer-aided manufacturing (CAM) software. After this class, you will have a complete understanding of the available sheet metal styles and export options, enabling you to produce models that meet manufacturing requirements.
© 2012 Autodesk
Learning Objectives
At the end of this class, you will be able to: Create sheet metal rules Create unfold rules Explain flat pattern export options in file formats such as DXF™ and
DWG™ Create and place punch tools
© 2012 Autodesk
Class Expectations
Advanced class Sheet metal is to limited brake press functionality only Primary export requirements are DXF or DWG Step by step instructions are included in the handout Presentation will be geared toward design intent challenges with demos
as time permits
© 2012 Autodesk
Introductions
Bill Graham Inventor Designer at Enclos Corp Experience in Consulting and Sheet Metal Fabrication Using Inventor since R3 Trained at AUGI CAD Camps Published in Cadalyst
© 2012 Autodesk
Introductions
Enclos Corp Expert in the design, engineering, fabrication, assembly and erection of
custom facade systems. Specialize in custom, unitized curtainwall systems. Blast, Hurricane, Medical, Earthquake, etc.
© 2012 Autodesk
Sheet Metal Styles
Material Thickness Transitions Corners Flat patterns
© 2012 Autodesk
Things to Consider
Fabrication requirements Welded corners Cutting flat patterns
Finish product Stress points
User input Minimize configuration Maximize options
© 2012 Autodesk
Demo
© 2012 Autodesk
Exporting Flat Patterns
Orientation Layers Format DWG/DXF Punch tools CAM requirements
© 2012 Autodesk
Demo
© 2012 Autodesk
Punch Tools
Louvers/Emboss Specialized iFeatures Simplified Representations Reporting in Drawings
© 2012 Autodesk
Things to Consider
Based on a single sketch Create work feature based on sketch No additional edges or faces
Sketch must contain exactly1 center point Simplified sketch for export
© 2012 Autodesk
Demo
© 2012 Autodesk
Conclusion
Use sheet metal styles to simplify user input DWG & DXF export can be accomplished directly from Simplified sketch for export
© 2012 Autodesk
Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.