© 2012 Autodesk

The Devil Is In The WorkflowModule 1: Successfully Plan and Implement BIMLuis RojasBuilding Design Product Line Manager, Eagle Point Software

© 2012 Autodesk

Module Summary

This module describes laying out a building information modeling (BIM) implementation plan. An overview on what this plan should contain but most importantly how to really make it work.

© 2012 Autodesk

Concept

Layout the Implementation Plan

© 2012 Autodesk

Concept

Buy-in IT Considerations

© 2012 Autodesk

Concept

Existing workflows New workflows

© 2012 Autodesk

Concept

Train lead team Pilot or test project

© 2012 Autodesk

Concept

But how do you get it out to everybody else?

© 2012 Autodesk

Concept

And into production?

© 2012 Autodesk

Concept

Not through old methods CAD manuals / Wiki / Google / YouTube / Class-room training

Innovative solution that provides Workflows Training Help desk

© 2012 Autodesk

Next Steps

Modules in this class Module 1: Successfully Plan and Implement BIM Module 2: Document and Update Workflows Module 3: Use Blended Learning

Recommended next steps: Review the other modules in this class Visit: http://www.eaglepoint.com/AU/workflows

© 2012 Autodesk Autodesk, AutoCAD, Autodesk Revit , Siteworks for Revit* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.

© 2012 Autodesk

The Devil Is In The WorkflowModule 2: Document and Update WorkflowsLuis RojasBuilding Design Product Line Manager, Eagle Point Software

© 2012 Autodesk

Module Summary

This module describes the methodology and tools that can be used to document your workflows and make them accessible to all necessary team members.

© 2012 Autodesk

Concept

STRUCTURAL

ENGINEERS

MEP SYSTEMS

ENGINEERS

BUILDERS &

FABRICATORS

OWNERS

CIVIL

ENGINEERS

ARCHITECTS

© 2012 Autodesk

Concept

© 2012 Autodesk

Concept

© 2012 Autodesk

Concept

Architecture

© 2012 Autodesk

Concept

Structure

© 2012 Autodesk

Concept

Mechanical, Electrical, Plumbing

© 2012 Autodesk

Concept

Coordination

© 2012 Autodesk

Demo

© 2012 Autodesk

Next Steps

Modules in this class Module 1: Successfully Plan and Implement BIM Module 2: Document and Update Workflows Module 3: Use Blended Learning

Recommended next steps: Review the other modules in this class Visit: http://www.eaglepoint.com/AU/workflows

© 2012 Autodesk

Autodesk, AutoCAD, Autodesk Revit , Siteworks for Revit* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.

© 2012 Autodesk

The Devil Is In The WorkflowModule 3: Use Blended LearningLuis RojasBuilding Design Product Line Manager, Eagle Point Software

© 2012 Autodesk

Module Summary

This module describes what tools to use to create and effectively use a blended learning environment that facilitates your BIM implementation regardless of the stage you are in.

© 2012 Autodesk

Concept

Keep in mind learning styles Give options

© 2012 Autodesk

Concept

Focus Understand the new workflow Understand the new technology

© 2012 Autodesk

Demo

© 2012 Autodesk

Next Steps

Modules in this class Module 1: Successfully Plan and Implement BIM Module 2: Document and Update Workflows Module 3: Use Blended Learning

Recommended next steps: Review the other modules in this class Visit: http://www.eaglepoint.com/AU/workflows

© 2012 Autodesk

Autodesk, AutoCAD, Autodesk Revit , Siteworks for Revit* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.