© ABB Group 7. Mai 2015 | Slide 1 eVD4 - The Smart eVolution Primary distribution circuit-breaker...

© ABB Group 18. April 2023 | Slide 1

eVD4 - The Smart eVolution Primary distribution circuit-breaker withintegrated protection, control and sensors

© ABB GroupApril 18, 2023 | Slide 2

eVD4: The Smart eVolution Complete integration in a single device

Current and voltage sensor in each pole

Equipped with Relion® technology: protection and control unit RBX615 with IEC61850 and Goose

HMI

(panel interface)

Measuring Protection and control Communication


eVD4: The Smart eVolution Medium voltage vacuum circuit-breaker

Innovation and a sound foundationof proven technology:

Since 1987, over 550,000 VD4 circuitbreakers have been successfullyinstalled in a wide range of applications, worldwide

Based on Relion technology

.


eVD4: The Smart eVolution Reduce time from purchase to commissioning

Standard panel Version with eVD4


eVD4: The Smart eVolution Versions, specifications, standards

Versions:

Fixed / Withdrawable for UniGear ZS1switchgear and PowerCube units

Specifications: Up to 17.5 kV rated voltage Up to 2,500 A rated current Up to 40 kA (3 s) breaking capacity

Standards: IEC 62271, EMC EN 50263 (2000),

EN60255-26 (2007)

www.abb.com/mediumvoltage


eVD4 - The Smart eVolution Components


Sensor converts primary circuit current and voltage into a signal

Rogowski coil measures current

Capacitive divider measures voltage

Measurements are in class 1: 1/5P Rogowski coil 1/3P capacitive divider

eVD4: The Smart eVolution Sensors

Current sensor

Voltage sensor


Advantages:

Absolutely linear voltage and current signals

Low potential signal is safer for people and auxiliary equipment

Extremely low energy usage

Fewer raw materials used

Automatic sensor selection, depending on relay configuration

eVD4: The Smart eVolution Sensors


The integrated unit provides protection, control, measuring and monitoring functions for substations. It also protects overhead lines, cable lines and motors.

Protection functions adapt to any radial and meshed network, regardless of earthing layout.

IEC 61850 compliant; supports communication between substation equipment and messaging system (GOOSE) in native mode.

Dedicated automatic configuration tool (PCM600)

eVD4: The Smart eVolution RBX615 unit based on Relion® technology


GOOSE: Generic Object OrientedSubstation Event

Units based on Relion® technology installed in switchgear communicate with each other and, through a network switch, with the substation’s control system.


Communication board:

Ethernet, two channels

Communication protocols:

Native IEC 61850 (including GOOSE)

TCP/IP Modbus®



Pre-configurations:

Feeder 1: Non-directional overcurrent protection and non-directional earth fault protection (current only)

Feeder 2: Non-directional overcurrent protection and directional earth fault protection based on measurement of phase voltage values (current and voltage)

Feeder 3: Directional overcurrent protection and directional earth fault protection based on measurement of phase voltage values and overvoltage and undervoltage protection (current and voltage)

Motor 1: Motor protection with measurement and protection functions based on current (current only)

Motor 2: Motor protection with measurement and protection functions based on current and voltage (current and voltage)


HMI allows the integrated unit to be parameterized, and displays the mimic diagram and certain values

Large, multi-page double display:Single-line diagram (SLD) page (left) + Standard menu (right)

8 LEDs

Power supply: 48 ... 250 V dc/ac

eVD4: The Smart eVolution Human-machine interface (HMI)


Connects auxiliary circuit of the circuit-breaker and integrated unit with auxiliary switchgear circuits

Two Ethernet ports transmit digital and communication signals

eVD4: The Smart eVolution Specific connector for eVD4


eVD4 - The Smart eVolution Advantages


eVD4: The Smart eVolution Performance improvements and integration advantages

Performance improvements by component harmonization and optimization leading to a MV system simplification and to an increase of the overall reliability.

The eVD4 offers specific advantages compared with a standard MV solution in all stages of the panel life cycle


Advantages along the panel life cycle Specification and ordering

Specification and flexibility:

No need to define any parameters for the sensors

RBX615 pre-configuration can be customized

Supply management:

A complete MV solution (CB, Relay and Sensor) can be obtained with just one single order and one single reference


Installation: The eVD4 is a ready to install solution.

The components are internally wired. All the wiring is instantaneously connected to the switchgear through the CB plug.

Less effort for engineering and wiring: The switchgear is highly standardized Less risk of errors and increased safety

and reliability Easier and faster engineering Shorter and reliable connections

Flexibility for last minute modification: The integrated solution is more versatile

and flexible.

Advantages along the panel life cycle Installation, Less wiring, Flexibility


Advantages along the panel life cycle Installation, Less wiring, Flexibility – Low Voltage Compartment

Standard circuit breakers eVD4


Advantages along the panel life cycle Testing, Maintenance, Spare parts

Easy and complete testing of the whole measurements chain by primary injection: It is possible to test the whole measurement chain by a primary injection in the CB contacts, easily accessible without any modification in the panel.

Easy maintenance, reduced Mean Time To Repair (MTTR): Standard accessories with few variances, readily available for easy maintenance.

Self-diagnostic functions

System quickly repaired in case of failure (no stops in production)

Optimization of the spare parts in stock


Advantages along the panel life cycle

Easy removable integrated protection and control unit:

The unit is fixed in a docking unit by means of screws

Facilitates easy access and service

Testing, Maintenance, Spare parts


Advantages along the panel life cycle Retrofit and revamping

Extremely simple and straightforward solution for retrofitting and revamping:

Faster and easier revamping process

Flexibility thanks to sensors high range of linearity and RBX615 programmability

No need to act on CTs and VTs as they come with the eVD4

Reduced effort for wiring and retesting


Advantages along the panel life cycle Switchgear simplification and easy operation

Specification Ordering Easy to install Less effort for engineering and wiring Less effort for Factory Acceptance

Test (FAT) while increasing safety and reliability

Flexibility and easier last minute modifications

Extremely simple and straight forward solution for retrofitting and revamping

Easy maintenance and reduced Mean Time To Repair (MTTR)

Optimization of the spare parts in stock


eVD4 - The Smart eVolution More than a product


Our specialized team helps you get the most out of the integrated circuitbreaker:

eVD4 Level 1 (Basic): circuit-breaker and basic maintenance Level 2 (Advanced): advanced maintenance Level 3 (Specialist): service activities

Integrated protection and control unit (RBX615) Programming control and protection functions (communication,

GOOSE, etc.)

eVD4: The Smart eVolution Not only a product: Training


1. Complete set of documentation and marketing material:All the information you may need on the eVD4 documentation

2. A specific eVD4 support line is available

Email : [email protected]

3. Technical drawings and electrical diagrams available in electronic version

eVD4: The Smart eVolution Not only a product: Customer support


eVD4 - The Smart eVolution What is coming next


New Features for the release 2.0:

RS485 CommCard and Modbus RTU

Optical Ethernet COM card

HMI function keys

Automatic relay configuration recovery by the HMI (a backup of the application will be stored in the HMI)

Automatic parameterization of the CB condition monitoring function for an effective diagnostic of the CB.

eVD4 used with RIO600 to have flexibility in the number of I/Os

eVD4: The Smart eVolution Integrated protection and control unit RBX615

© ABB GroupApril 18, 2023 | Slide 28© ABB Group 18. April 2023 | Slide 28


eVD4 - The Smart eVolution Protection Functions


eVD4: The Smart eVolution Protection Functions






eVD4 - The Smart eVolution Digital I/Os


eVD4: The Smart eVolution Digital Inputs


eVD4: The Smart eVolution Digital Outputs

Date post:	16-Dec-2015
Category:	Documents
Upload:	melinda-daniels
View:	215 times
Download:	2 times

© ABB Group 7. Mai 2015 | Slide 1 eVD4 - The Smart eVolution Primary distribution circuit-breaker...

Documents