+ All Categories
Home > Documents > ShipParts.com...According to ISO 16625, the groove of the drum and sheave should have a diameter...

ShipParts.com...According to ISO 16625, the groove of the drum and sheave should have a diameter...

Date post: 09-Mar-2021
Category:
Upload: others
View: 5 times
Download: 0 times
Share this document with a friend
10
Transcript
Page 1: ShipParts.com...According to ISO 16625, the groove of the drum and sheave should have a diameter within 5% to 10% bigger than wire rope diameter. To determine the amount of wear: e
Page 2: ShipParts.com...According to ISO 16625, the groove of the drum and sheave should have a diameter within 5% to 10% bigger than wire rope diameter. To determine the amount of wear: e
Page 3: ShipParts.com...According to ISO 16625, the groove of the drum and sheave should have a diameter within 5% to 10% bigger than wire rope diameter. To determine the amount of wear: e
Page 4: ShipParts.com...According to ISO 16625, the groove of the drum and sheave should have a diameter within 5% to 10% bigger than wire rope diameter. To determine the amount of wear: e
Page 5: ShipParts.com...According to ISO 16625, the groove of the drum and sheave should have a diameter within 5% to 10% bigger than wire rope diameter. To determine the amount of wear: e
Page 6: ShipParts.com...According to ISO 16625, the groove of the drum and sheave should have a diameter within 5% to 10% bigger than wire rope diameter. To determine the amount of wear: e
Page 7: ShipParts.com...According to ISO 16625, the groove of the drum and sheave should have a diameter within 5% to 10% bigger than wire rope diameter. To determine the amount of wear: e
Page 8: ShipParts.com...According to ISO 16625, the groove of the drum and sheave should have a diameter within 5% to 10% bigger than wire rope diameter. To determine the amount of wear: e
Page 9: ShipParts.com...According to ISO 16625, the groove of the drum and sheave should have a diameter within 5% to 10% bigger than wire rope diameter. To determine the amount of wear: e
Page 10: ShipParts.com...According to ISO 16625, the groove of the drum and sheave should have a diameter within 5% to 10% bigger than wire rope diameter. To determine the amount of wear: e

Recommended