+ All Categories
Home > Documents >  · control will start transmitting signal of codes in every 500ms. 4. When the device turns on or...

 · control will start transmitting signal of codes in every 500ms. 4. When the device turns on or...

Date post: 11-Oct-2018
Category:
Upload: vumien
View: 213 times
Download: 0 times
Share this document with a friend
4
Transcript
Page 1:  · control will start transmitting signal of codes in every 500ms. 4. When the device turns on or off, press "MUTE" button or any of Device button to save setting & the
Page 2:  · control will start transmitting signal of codes in every 500ms. 4. When the device turns on or off, press "MUTE" button or any of Device button to save setting & the
Page 3:  · control will start transmitting signal of codes in every 500ms. 4. When the device turns on or off, press "MUTE" button or any of Device button to save setting & the
Page 4:  · control will start transmitting signal of codes in every 500ms. 4. When the device turns on or off, press "MUTE" button or any of Device button to save setting & the

Recommended