PLASMA DISPLAY TV
Chassis : D62B
Model: PPM50H3QX/EDC
PLASMA DISPLAY TV CONTENTS
Specifications
Alignment and Adjustments
Exploded View and Parts List
Service Item
Schematic Diagrams
1.
2.
3.
4.
5.
SERVICE Manual
Specifications
Samsung Electronics 1-1
1. Specifications
MODEL
Display
Display
Screen Size
Voltage
Power Consumption
Number of Pixels
External Control
AUDIO Input
AUDIO Output
VIDEO Input
VIDEO Output
Dimensions
Weight
PPM50H3Q
1204.6(W) x 79(D) x 7245(H) mm / 47.43(W) x 3.11(D) x 28.5(H) inches
43 Kg (without stand)
50 Inches
AC 120V, 60Hz / AC 100-250V, 50/60Hz
490 Watts
1366(H) X 768(V)
RS-232C IN(Mini jack), RS-232C OUT(D-SUB 9P)
VIDEO / S-VIDEOCOMPONENT 1COMPONENT 2RGB(PC) 1/2DVI
External Speaker (10W+10W)
Audio Output (L/R RCA)
VIDEOS-VIDEOCOMPONENT 1 - 480i / 480p / 720p / 1080iCOMPONENT 2/RGB2(PC) IN (BNC, 5P, 480i~1080i, VGA~XGA) RGB1(PC1) - D-SUB 15PDVI
Monitor Output (RCA)
1-2 Samsung Electronics
MEMO
Alignment and Adjustments
Samsung Electronics 2-1
2. Alignment and Adjustments
2-1 Service Mode
2-1-1 SERVICE MODE Entry Method (General Transmitter)
¢ Using the Customer Remote
1. Turn the power off and set to stand-by mode.
2. Press the remote buttons in this order; POWER OFF-INFO-MENU-MUTE-POWER ON to turn the set on.
3. The set turns on and enters service mode.
¢ Using the Factory Remote
1. Turn the power on.
2. Press the remote buttons in this order : Display-Factory.
3. The set enters service mode.
* If you fail to enter service mode, repeat steps 1 and 2 above.
2-1-2 Initial SERVICE MODE DISPLAY State
2-1-2(A) OSD DISPLAY
2-1-2(B) Button Operations in SERVICE MODE
* While in Tuner mode, the direct access buttons can be used to select and change channels.
☞ Indicates selected input mode☞ Picture Adjustment☞ Setting the Initial Values☞ Setting the Special Features☞ Options-1 : Particulars Product Options☞ Options-2 : PDP Properties Options☞ Initializing after saving the adjustments☞ Software Version Information
Factory Mode Current Input Mode01. Picture Improvement √
02. Initial Setting √
03. PIP/TTX/Test Pattern √
04. Option-1 √
05. Option-2 √
06. Reset √
Release : 2004-03-02-14:30Version : T_NELPEU-1003
Menu Displays all menusUP/DOWN Cursor moves to select itemsLEFT/RIGHT To increase and decrease the data of the selected items
(ENTER) Confirm your choice(Store OR Enter)TV/VIDEO Button Change input source
Alignment and Adjustments
2-2 Samsung Electronics
2-2 WHITE Balance Coordinates
2-2-1 PS42D4S White Balance Adjustment
1. W/B Adjustment is required for the following six modes :DVI →Component(1080i) →Component(720p) →PC →VIDEO (Video port) →VIDEO (Graphic port)
2. Adjustment Method (Signal equipment : MSPG-925LTH, Measurement equipment : CA210)
■ MSPG-925LTHEquipment that outputs analog and digital signals simultaneously(Analog / Digital signal output / TV signal output (S-Video included) / HDTV signal output)-. Digital Serial : TMDS (DVI24, SiI160) + DVI-I (Analog, Digital)-. Monitor Signal (Analog): R, G, B, HS, VS, CS-. TV Signal (CVBS) : NTSC M, NTSC J (7.5 IRE On/Off) (BNC or RCA), PAL B, D, G, H, I, PAL M, Nc -. D-TV Signal (1080i, 720p, 480p) ♣♣ MSPG-925 is used to adjust the W/B
■ CA210 : Color Analyzers adjusting brightness, chromaticity and etc.-. R.G.B monochrome correction, brightness and gamma character adjustment-. White Balance and flickering measurement
(1) Adjust the TV by varying the panel values and the video DNIe register in order th determine the reference W/B with a DVI input.
(2) For Component mode, adjust the register of AD9883 to align the DTV signal to the DNIe and logic panel value .(At this time, do not adjust the gain of AD9883 →the Highlight W/B does not need to be adjusted since its deviation fallswithin valid distribution range.)
(3) PC adjustment is same as Component adjustment.(The offset can be applied to the values obtained through DTV adjustment. However, additional adjustment is required for Y,Cb, and Cr, since PC processes R, G, and B signals.)
* Attention for Component/PC adjustment- Load the Auto color pattern. (Pattern #21)
♣♣ Auto color pattern appears as black and white.problems may occur if pattern #21 or similar is not used.
- Excute factory mode auto color to adjust gain and offset.- Load the Toshiba Pattern.(Pattern #16) and then adjust W/B.
♣♣ When factory mode auto color is executed, gain andoffset value is adjusted automatically.
Alignment and Adjustments
Samsung Electronics 2-3
PC(A-RGB)
DVI(D-RGB)
FLI2310
V-PEAKINGY-DelayC-DelayBrightnessContrastSaturation
RFVIDEO
TTX-mode
RGB
RGB
ScalerRGB/YUVCONTRASTBRIGHT
ASI510
RGB-cont
RGB-bri
R-gammaG-gammaB-gamma
DNIe
Bri-offset
Con-offset
Different adjustment values will be appliedto DVI, PC ,DTV(Component) and Video, mode.
AdjustmentReg
Memory Mode- DVI- PC- Video- Component(DTV)
Y/R-gainCr/B-gainCb/G-gain
Y/R-offsetCr/b-offsetCb/G-offset
AdjustmentReg
Memory Mode Analog PC- Auto Color value(RGB)DTV Mode
Logic
SIL169
SWIC
R-driG-driB-dri
R-cutoffG-cutoffB-cutoff
AdjustmentRegAD9883
CXA2151YPbPr
DTVCOMP1,2
GraphicPort
Memory Mode- DVI- PC- Video- Component(DTV)
VideoPort
Progressive to Interface
DS90C385
VPC3230
(4) Video adjustment should be performed with the Toshiba pattern in RF video mode. The adjustment should be the same as in step 1.
Also, the video signal uses the video port when there is no other input signal. However, the signal uses the graphicport in PIP mode, which includes other input signals (PC, DVI, Component, etc.), Video adjustment should be performed withVideo port and Graphic port separately.
* Thus, Micom saves the W/B data separately for each memory mode of the block (See the block diagram given below) during W/B adjustment.
H/L
L/L
x
y
Y(fL)
x
y
Y(fL)
VIDEO
275
290
38.5
280
295
2.2
Component
275
290
38.5
280
295
2.2
PC
275
290
38.5
280
295
2.2
DVI
275
290
38.5
280
295
2.2
2-2-2(A) White Balance Coordinates by Mode(Europe)
Alignment and Adjustments
2-4 Samsung Electronics
2-3-1 Factory OSD Main Menu
2-3 Factory Data
☞ Indicates selected input mode☞ Picture Adjustment☞ Setting the Initial Values☞ Setting the Special Features☞ Setting PDP Properties Options☞ Setting PDP Properties Options☞ Initializing after saving the adjustments☞ Software Version Information
01.Picture Improve
Factory Mode Current Input Mode01. Picture Improvement √
02. Initial Setting √
03. PIP/TTX/Test Pattern √
04. Option-1 √
05. Option-2 √
06. Reset √
Release : 2004-03-02-14:30Version : T_NELPEU-1003
☞ White Balance Adjustment☞ Color Adjustment☞ Contrast & Brightness Enhancement☞ Detail Enhancement Sharpness Adjustment☞ Y/C Delay Setting according to the System and
Input Modes☞ Motion Enhancing Adjustment☞ DNIe Registers☞ Logic Registers of the Panel☞ Picture Size Registers
01.Picture Improvement Current Input Mode01. White Balance √
02. Color √
03. Cont/Bri Enhancement √
04. Detail Enhancement √
05. Y/C Delay √
06. Motion √
07. DNIe √
08. Logic √
09. Picture Size √
H/L
L/L
x
y
Y(fL)
x
y
Y(fL)
VIDEO
265
270
38
265
270
1.8
Component
270
275
40
270
278
0.5
PC
285
295
30
285
295
0.65
DVI
285
295
38
285
295
0.7
2-2-2(B) White Balance Coordinates by Mode(Southeast Asia)
Alignment and Adjustments
Samsung Electronics 2-5
01.Picture Improve => 01.White Balance Adjustment
01.White Balance
01.R Drive
02.G Drive
03.B Drive
04.R Cutoff
05.G Cutoff
06.B Cutoff
07.Sub Contrast
08.Sub Brightness
09.R Gain
10.G Gain
11.B Gain
12.R/Cr Offset
13.G/Y Offset
14.B/Cb Offset
15.Auto color
TV
140
130
120
128
128
128
37
54
142
142
142
60
48
64
on/off
Mode-1
140
130
120
128
128
128
37
54
X
X
X
X
X
X
X
Initial Values of Input Modes
Video Component PC DVIRelevant IC
Logic
DNIe
AD9883
ITEM
❈ Input modes require respective storing the changes after adjustment.
01~06 : Logic07~08 : DNIe09~15 : AD9883
Mode-2
140
130
120
128
128
128
37
54
128
150
128
60
48
64
Ο
Mode-4
140
130
120
128
128
128
37
54
X
X
X
X
X
X
X
Mode-3
140
130
120
128
128
128
37
54
128
150
128
60
48
64
Ο
Alignment and Adjustments
2-6 Samsung Electronics
01.Picture Improve => 02.Color Adjustment
02.Color
01.Saturation
02.Tint
03.RGB/YUV U-SAT
04.RGB/YUV V-SAT
05.RGB/YUV Tint
06.FLI-saturation
07.R Gamma
08.G Gamma
09.B Gamma
10.Gain-Sel
11.Cr Gain
12.Cb Gain
13.Y Gain
TV
129
36
22
22
0
130
32
32
32
1
7
7
1
Mode-1
129
32
35
37
0
130
32
32
32
x
x
x
x
Mode-2
x
x
x
x
x
x
32
32
32
1
7
7
1
Mode-3
x
x
x
x
x
x
32
32
32
x
x
x
x
Mode-4
x
x
x
x
x
x
32
32
32
x
x
x
x
Initial Values of Input Modes
PC DVIRelevant IC
VPC3230
FLI2310
ASI510
CXA2151Q
ITEM
01 ~05 : VPC323007~09 : ASI51006 : FLI231010~13 : CXA2151
Video Component
Alignment and Adjustments
Samsung Electronics 2-7
01.Picture Improve => 03.Contrast & Brightness Enhancement
03.Cont/Bri Enhancement
01.Contrast
02.Brightness
03.RGB/YUV Contrast
04.RGB/YUV Brightness
05.FLI-Contrast
06.FLI-Brightness
07.R Contrast
08.G Contrast
09.B Contrast
10.R Brightness
11.G Brightness
12.B Brightness
TV
40
27
28
67
128
128
32
32
32
0
0
0
Mode-1
40
27
28
67
128
128
32
32
32
0
0
0
Mode-2
x
x
x
x
x
x
32
32
32
0
0
0
Mode-3
x
x
x
x
x
x
32
32
32
0
0
0
Mode-4
x
x
x
x
x
x
32
32
32
0
0
0
Initial Values of Input Modes
PC DVIRelevant IC
VPC3230
FLI2310
ASI510
ITEM
01~04 : VPC323007~12 : ASI51005~06 : FLI2310
Video Component
Alignment and Adjustments
2-8 Samsung Electronics
01.Picture Improve => 04.Detail Enhancement
04.Detail Enhancement
01.VAPGAIN
02.VAPINV
03.YPFT
04.YPFG
05.Peaking
06.Peaking Filter
07.Coring
08.HPLL_ERR_MIN
09.HPLL_ERR_MAX
10.V_SLICER
11.HenhGain
12.HLEGain
13.HChrEnGain
Mode-1
4
16
3
9
3
2
0
18
80
0
64
64
32
Mode-2
x
x
x
x
x
x
x
xx
x
x
x
x
Mode-3
x
x
x
x
x
x
x
x
x
x
x
x
x
Mode-4
x
x
x
x
x
x
x
x
x
x
x
x
x
Initial Values of Input Modes
PC DVIRelevant IC
uPD64083
VPC3230
FLi2310
ITEM
01~04 : uPD6408305~10 : VPC323011~13 : FLI2310
Video Component
4
16
3
9
3
2
0
18
80
0
64
64
32
TV
Alignment and Adjustments
Samsung Electronics 2-9
01.Picture Improve => 05.Y/C Delay Setting according to the System and Input Modes
05.Y/C Delay
01. PAL-B/G
02. PAL-D/K/L
03. PAL-I
04. SECAM-B/G
05. SECAM-D/K/L
06. NTSC
07. PAL-AV
08. SECAM-AV
09. NTSC-AV
10. RGB/YUV-Y
11. RGB/YUV-UV
12. FLI-Y
13. FLI-C
TV
255
254
254
251
250
254
254
252
254
0
0
5
11
Mode-1
255
254
254
251
250
254
254
252
254
0
0
5
11
Mode-2
x
x
x
x
x
x
x
x
x
x
x
x
x
Mode-3
x
x
x
x
x
x
x
x
x
x
x
x
x
Mode-4
x
x
x
x
x
x
x
x
x
x
x
x
x
Initial Values of Input Modes
PC DVIRelevant IC
VPC3230
ITEM
01.Picture Improve => 06.Motion Enhancing Adjustment
06.Motion
01.HPLL Speed-1
02.Auto Lock
03.V-motion Tresh
TV
2
0
42
Mode-1
2
0
42
Mode-2
x
x
x
Mode-3
x
x
x
Mode-4
x
x
x
Initial Values of Input Modes
PC DVIRelevant IC
VPC3230
FLi2310
ITEM
01~11 : VPC323012~13 : FLI2310
01 ~ 02 : VPC323003 : FLI2310
Video Component
Video Component
FLI2310
Alignment and Adjustments
2-10 Samsung Electronics
01.Picture Improve => 07.DNIe Registers
07.DNIe
01.SUB BRIGHT
02.SUB CONT
03.SCALE MAX
04.SCALE MIN
05.TH HPF
06.TH EDGE
07.NR SEL
08.CE UPPER
09.CE CUTOFF
10. CE GAIN
11. DCE GAIN
12. SKIN ON
13. CTI GAIN
14. DE NOISE GAIN
15. TH CORING
16. PATT SEL
17. NOISE TH2
18. H CONT
19. V CONT
20. BLACK GAIN
21. WHITE GAIN
22. WTE GAIN
23. CTE GAIN
TV
54
37
48
16
0
4
2
220
32
64
75
0
0
8
3
0
100
63
32
11
31
300
176
Mode-1
54
37
48
16
0
4
2
220
32
64
75
0
0
8
3
0
100
63
32
11
31
300
176
Mode-2
54
37
48
16
0
4
2
240
32
80
75
0
0
8
3
0
100
63
63
0
31
300
176
Mode-3
54
37
48
16
0
4
2
240
32
64
75
0
0
8
3
0
100
63
63
2
31
300
176
Mode-4
54
37
48
16
0
4
2
240
32
64
75
0
0
8
3
0
100
63
63
2
31
300
176
Initial Values of Input Modes
PC DVIRelevant IC
DNIe
ITEM
01~23 : DNIe
Video Component
Alignment and Adjustments
Samsung Electronics 2-11
01.Picture Improve => 08.Logic Registers
08.Logic
01.R DRIVE
02.G DRIVE
03.B DRIVE
04.R CUTOFF
05.G CUTOFF
06.B CUTOFF
07.GAMMA
08.GTS SET
09.ERD MODE
10.RANDOM NOISE
11.DIFF FILTER
12.APC
13.APC SET
14.APC VALUE
15.ACTIVE VPOS
16.ACTIVE HPOS
17.VSYNC POS
18.HSYNC POS
19.VSYNC WIDTH
20.HSYNC WIDTH
TV
140
130
120
128
128
128
1
1
2
0
1
1
0
127
12
19
3
32
2
12
Mode-1
140
130
120
128
128
128
1
1
2
0
1
1
0
127
12
19
3
32
2
12
Mode-2
140
130
120
128
128
128
1
1
2
0
1
1
0
127
12
19
3
32
2
12
Mode-3
140
130
120
128
128
128
1
1
2
0
1
1
0
127
12
19
3
32
2
12
Mode-4
140
130
120
128
128
128
1
1
2
0
1
1
0
127
12
19
3
32
2
12
Initial Values of Input Modes
PC DVIRelevant IC
Logic
ITEM
01~20 : Logic
Video Component
Alignment and Adjustments
2-12 Samsung Electronics
01.Picture Improve => 09.Picture Size Registers
09.Picture Size
01. H START OFFSET
02. V START OFFSET
03. H END OFFSET
04. V END OFFSET
05.OVERSCAN B
06.OVERSCAN G
07.OVERSCAN R
TV
0
0
0
0
38
38
38
Mode-1
0
0
0
0
38
38
38
Mode-2
0
0
0
0
38
38
38
Mode-3
0
0
0
0
38
38
38
Mode-4
0
0
0
0
38
38
38
Initial Values of Input Modes
PC DVIRelevant IC
ASI510
ITEM
02.Initial Setting Current Input Mode01. Initial P-Mode √
02. P-Mode Value √
03. Initial Color Tone √
04. Color Tone Value √
02.Setting the Initial Values
01.Initial P-Mode Current Input Mode01. Dynamic02. Standard03. Movie04. Custom
02.Initial Setting => 01.Initial P-Mode
02. P-Mode Value Current Input Mode01. Dynamic √
02. Standard √
03. Movie √
04. Custom √
02.Initial Setting => 02.P-Mode Value
☞ Indicates selected input mode☞ Reset after saving the P-Mode adjustments☞ P-MODE the data Values☞ Reset after saving the color tone adjustments☞ Color tone the data Values
01~07 : ASI510
Video Component
Available options for the PC/DVI Mode are High,Middle,Low and Custom.
Available options for the PC/DVI Mode are High,Middle,Low and Custom.
Alignment and Adjustments
Samsung Electronics 2-13
02.Initial Setting Current Input Mode01. Cool2 02. Cool1 03. Normal04. Warm105. Warm2
❈ Available Settings for the PC Mode areCustom,Color Tone 1, Color Tone 2, Color Tone 3
❈ Available options for the DVI Mode areColorTone1, ColorTone2, ColorTone3
02.Initial Setting => 03.Initial Color Tone
01.Dynamic Current Input Mode01. Contrast œ 100 √02. Brightness œ 45 √03. Sharpness œ 75 √04. Color œ 55 √05. Tint œ 50 √
02.Initial Setting => 02.P-Mode Value => 01.Dynamic
02.Standard Current Input Mode01. Contrast œ 80 √02. Brightness œ 50 √03. Sharpness œ 50 √04. Color œ 50 √05. Tint œ 50 √
02.Initial Setting => 02.P-Mode Value => 02.Standard
03.Movie Current Input Mode01. Contrast œ 50 √02. Brightness œ 55 √03. Sharpness œ 25 √04. Color œ 40 √05. Tint œ 50 √
02.Initial Setting => 02.P-Mode Value => 03.Movie
04.Custom Current Input Mode01. Contrast œ 80 √02. Brightness œ 50 √03. Sharpness œ 50 √04. Color œ 50 √05. Tint œ 50 √
02.Initial Setting => 02.P-Mode Value => 04.Custom
Alignment and Adjustments
2-14 Samsung Electronics
04.Color Tone Value Current Input Mode01. Cool202. Cool103. Normal04. Warm105. Warm2
❈ Adjusting and Storing the Changes:Change the White Balance (Color Temperature)
1. Selecting an item will display the same options asthose of White Balance.
2. Available options for the PC Mode are Custom,ColorTone 1, Color Tone 2, Color Tone 3
3. Available options for the DVI Mode are ColorTone1,ColorTone2, ColorTone3.
4. Data Storing is classified according to the PC Mode &Other Modes.
02.Initial Setting => 04.Color Tone Value
03.PIP/TTX/Test Pattern
03.PIP/Test Pattern
01.PIP R CONT
02.PIP G CONT
03.PIP B CONT
04.PIP R BRIGHT
05.PIP G BRIGHT
06.PIP B BRIGHT
07.PIP FILTER LC
08.PIP FILTER ML
09.PIP FILTER MR
10.PIP FILTER UC
11. TTX CONT
12. TTX BRIGHTNESS
13.LOG PATTERN
14.LOG HIGH LEVEL
15.LOG LOW LEVEL
16.ASI COLORBAR
TV
32
32
32
0
0
0
0
0
0
0
Center
Center
0
255
0
1
Mode-1
32
32
32
0
0
0
0
0
0
0
Center
Center
0
255
0
1
Mode-2
32
32
32
0
0
0
0
0
0
0
Center
Center
0
255
0
1
Mode-3
32
32
32
0
0
0
0
0
0
0
Center
Center
0
255
0
1
Mode-4
32
32
32
0
0
0
0
0
0
0
Center
Center
0
255
0
1
Initial Values of Input Modes
PC DVIRelevant IC
ASI510
SDA6001
Logic
ASI510
ITEM
01~10 : ASI51011~12 : SDA600113~16 : Logic, ASI510
Video Component
Alignment and Adjustments
Samsung Electronics 2-15
04.Option-1 Current Input Mode00. AGC œ Off √01. SCART/RCA SCART02. CW/CS CW03. TELE-WEB OFF04. LANGUAGE GROUP EUROPE05. LANGUAGE ENGLISH06. ATM ON07. Melody Volume 1008. TUNER 2-TUNER09. LNA ON10. CHILD LOCK ON11. TOP TTX ON12. TTX GROUP W.EUROPE13. HIGH DEVIATION OFF14. SD Delay 215. HD Delay 116. Video Port Graphic17. DOC Write OFF 18. Initial Write OFF
04.Option-1
00. Off => On01. SCART(Full Input) => RCA(Delete Scart) 02. CW(EUROPE) => CS(SOUTHASIA)03. Off => On04. Europe => Asia05. English => 18 Languages(Europe)06. On => Off07. 0 ~ 2008. 2-Tuner => 1-Tuner => Off09. On => Off10. On => Off11. On => Off12. W.Europe => 6 Group13. Off => On14. O(default),1(27ms),2(54ms),3(108ms)15. O(default),1(27ms),2(54ms),3(108ms)16. Graphic <-> Video17. OFF->ON18. OFF->ON
00. AGC : ON <-> OFF-. OFF : VSP9437,(Master)0x0Bh[b7.b6]=[11], (Slave)0x6Fh[b7.b6]=[11]-. OFF : VSP9437,(Master)0x0Bh[b7.b6]=[00], (Slave)0x6Fh[b7.b6]=[00]
01. Scart/Rca : Scart => RCA-.Scart : Europe & Scart area(All Input is selected)-.RCA : Southeast Asia & RCA area(Delete Scart)
02. CW/CS : CW => CS- CW : PAL, SECAM-B/G, D/K, I, L/L', NTSC4.43 = West Europe- CS : PAL, SECAM-B/G, D/K, I, NTSC3.58/4.43 = Countries except West Europe.
Ex) Southeast Asia,the Middle East,Russia,China, etc.
03. Tele-Web- Off : TeleWeb non-broadcasting Country- On : TeleWeb broadcasting Country
04. Language Group : Europe => Asia-. Europe : 18 languages-. Asia : 7 languages
05. Language : Select language- Language Group is Europe : 18 languages(English=>Bulgarian=>Croatian=>Czechoslovak=>Netherlandish=>French=>German=>Greek=>Hungarian=>
Italian=>Poland=>Portuguese=>Rumanian=>Russian=>Spanish=>Swedish=>Turki=>Yugoslave)- Language Group is Asia : 5 languages
(English=>French=>Chinese=>Arabic=>Persian)
06. ATM : On => Off-. ATM available region : On -. ATM non-available region : Off-. ATM at the time of OFF one from Funtion item the Country is changed with the Area and the ATM is changed with auto
search.
Alignment and Adjustments
2-16 Samsung Electronics
07. Melody Volume-.Able to adjust from 0 to 20.
08. Tuner-. 2-Tuner , 1-Tuner -. Off : Menu -> Tuning delete
09. LNA- On : Using LNA built-in Tuner - Off : Not in use LNA built-in Tuner
10. Child Lock-. On : TV Model-. Off : Model has deletion of Child Lock function
11. Top TTX- On : Only Top broadcasting region set 'On'
Ex) Germany, Switzerland, etc- Off : Country except Top broadcasting region.
12. TTX Group : TTX Language Group and National Option Code - By language, Select at the factory option table.- TTX language will be displayed by National Option code.- TTX Language Group by each country : 6 Groups
West Europe => East Europe => Turkish/Greek => Cyrillic => Arabic/Hebrew => Farsi/Hebrew
13. High Deviation : To prevent Sound Buzz resulting from regional conditions of the input signals.- Set to ‘Off’ for the standardized sound input signal, in the region such as Europe.- Set to ‘On’ for the over-modulated sound input signal, in the region such as Southeast Asia.
14. SD Delay : AV mode Delay1.8ms delay --------- delay027ms delay --------- delay154ms delay --------- delay2
108ms delay (max) --------- delay3
15. HD Delay : DTV/PC/DVI mode Delay
16. Video Port : Setting of Aurora Input Port for VIDEO signal -. Graphic : Input Video Signal though Graphic port of Aurora (In case of NON-PIP VIDEO) -. Video : Input Video Signal though Graphic port of Aurora (In case of PIP VIDEO)
17. DDC Write-.Off : Disable to write DVI DDC (DDC Write Protection)-.On : Able to write DVI DDC
* In the initial stage of the Operational Inspection, DDC Write is enabled (DDC Write is ON).DDC Write is disabled (DDC Write is OFF) after the Factory Reset.
* To enable DDC Write at a later time, enter Factory Mode and set this menu to ON.
18. Initial Write
Alignment and Adjustments
Samsung Electronics 2-17
05.Option-2 Current Input Mode00. Pixel Shift œ V √
01. Shift Test œ 0 √02. Pixel Number œ 1 √
03. Pixel Line œ 1 √04. Shift Time œ 4 √05. Number Range œ 4 √06. Line Range œ 4 √07. Temp Protection œ On √
08. DNIe DEMO œ On √
09. PILOT HIGH œ 21 √
10. PILOT LOW œ 16 √11. CHECKSUM œ 0000 √
05.Option-2
00. Off => V => G => V/G01. 0: minute , 1: SEC02. Left,right movement Pixel 03. Upper, low movement Pixel 04. Shift Test
2-18 Samsung Electronics
MEMO
Exploded View & Parts List
Samsung Electronics 3-1
3. Exploded View & Parts List
3-1 PPM50H3QX/EDC
No Code No Description;Specification Q’ty Remark
1 BN96-00172Q ASSY COVER P-FRONT;50P3H(VMB),ASIA,HIPS 1 M00031-1 BN64-00098N CABINET-FRONT;50P3 VMB,HIPS,HB,HF-1690H, 1 T0003 S.N.A1-2 BP64-00177A BADGE-BRAND;ALL,AL,T1.5,70,11.3,BLK,SILI 1 T0057 S.N.A1-3 BP64-00045B KNOB CONTROL;P3,ABS,HB,GRY,SVM3012 1 T0022 S.N.A1-4 BN64-00074B WINDOW-REMOTE;42P3S,PMMA,,,,,,CLEAR 1 S.N.A2 BN94-00494C ASSY PCB MISC-CONTROL;SPD-50P3H,D56A/D59 1 T00983 6003-001026 SCREW-TAPTITE;RH,+,B,M4,L15,ZPC(BLK),SWR 3 T0081 S.N.A4 BN64-00125A SCREEN-EMI,FITER;FILTER,50P3,T47%,1155+6 1 T00555 BN61-00262D BRACKET-FILTER TOP ASSY;50P3H,AL5052,T1. 1 S.N.A6 BN61-00263D BRACKET-FILTER SIDE LEFT;50P3H,AL5052,T1 1 S.N.A7 BN61-00197A BRACKET-FILTER,SIDE;50P3H,AL5052,T1.2 1 S.N.A8 BN61-00264D BRACKET-FILTER BOT ASSY;50P3H,AL5052,T1. 1 S.N.A9 6003-001026 SCREW-TAPTITE;RH,+,B,M4,L15,ZPC(BLK),SWR 10 T0081 S.N.A10 BN61-00967A HOLDER-MODULE;50P3H,AL DIECASTING 4 S.N.A11 6003-001026 SCREW-TAPTITE;RH,+,B,M4,L15,ZPC(BLK),SWR 8 T0081 S.N.A12 BN96-00985A ASSY PDP P-MODULE;M3,S50HW-XD03,D66A,D3. 1 T004413 6006-001126 SCREW-MACHINE;WSP,PH,+,M5,L12,NI PLT,SWR 4 CCM114 BN61-00674A STAND-BASE;PPM42S3,PPS 2 M041215 BN94-00494U ASSY PCB MISC-SMPS;SPD-50P4HD,D66A,DAVIN 1 T012416 BN96-00999A ASSY PDP P-X MAIN BOARD;LJ92-00852A,S50H 1 T007317 BN96-01001A ASSY PDP P-Y MAIN BOARD;LJ92-00853A,S50H 1 T009618 BN96-01012A ASSY PDP P-LOGIC MAIN BOARD;LJ92-00949A, 1 T003719 GUIDE-STAND;50P3H,AL DIECASTING 220 BN96-00266D ASSY COVER P-BACK SUB;PPM50H3,AL3032 T1. 1 T0008 S.N.A21 BN31-00001A FAN-ASSY;G4020S05B2-RS,PBTP,UL94-Vo,Brac 3 T024322 6006-001035 SCREW-ASS’Y MACH;WSP,PH,+,M3,L8,ZPC(YEL) 8 EL013 S.N.A23 BN94-00559A ASSY PCB MISC-DIGITAL;PPM50H3QX/XEU,D62B 1 T0132 S.N.A24 BN94-00560A ASSY PCB MISC-ANALOG;PPM50H3QX/XEU,D62B, 1 T0145 S.N.A25 BN96-00173C ASSY COVER P-BACK;PPM50H3,AL3032 T1.2,DG 1 T000125-1 BN63-00531B COVER-BACK SUB;PPM50H3,AL3032,1.2,VMB,DG 1 S.N.A25-2 BN61-00202B BRACKET-HANDLE;42P3,T1.5,DGM5233 2 S.N.A26 BN96-00286F ASSY MISC P-BRACKET TERMINAL;P3,VMB 1 S.N.A27 6006-001194 SCREW-ASSY TAPT;WP,BH,+,M4,L20,ZPC(BLK),SWRCH18A 4
You can search for the updated part code through ITSELF web site.URL : http://itself.sec.samsung.co.kr
Electrical Parts List
Samsung Electronics 4-1
4. SERVICE ITEM
D0254 AA32-00013B MODULE REMOCON;346HF5,38KHz,940mm,MESH,H 1
T0074 BN59-00366A REMOCON;TM76,D61A,42,G6148,PPM42S3,EX 1
T0055 BN64-00125A SCREEN-EMI,FITER;FILTER,50P3,T47%,1155+6 1
T0098 BN94-00494C ASSY PCB MISC-CONTROL;SPD-50P3H,D56A/D59 1
T0124 BN94-00494U ASSY PCB MISC-SMPS;SPD-50P4HD,D66A,DAVIN 1
M0003 BN96-00172Q ASSY COVER P-FRONT;50P3H(VMB),ASIA,HIPS 1
T0001 BN96-00173C ASSY COVER P-BACK;PPM50H3,AL3032 T1.2,DG 1
M0764 BN96-00756A ASSY STAND P-SCREW;PPM50H3,SCREW+PE-BAG, 1
T0044 BN96-00985A ASSY PDP P-MODULE;M3,S50HW-XD03,D66A,D3. 1
T0073 BN96-00999A ASSY PDP P-X MAIN BOARD;LJ92-00852A,S50H 1
T0096 BN96-01001A ASSY PDP P-Y MAIN BOARD;LJ92-00853A,S50H 1
T0111 BN96-01002A ASSY PDP P-Y BUFF UPPER BOARD;LJ92-00880 1
T0112 BN96-01003A ASSY PDP P-Y BUFF DOWN BOARD;LJ92-00881A 1
T0113 BN96-01004A ASSY PDP P-E BUFFER BOARD;LJ92-00917A,S5 1
T0114 BN96-01005A ASSY PDP P-F BUFFER BOARD;LJ92-00918A,S5 1
T0115 BN96-01006A ASSY PDP P-G BUFFER BOARD;LJ92-00919A,S5 1
T0116 BN96-01007A ASSY PDP P-H BUFFER BOARD;LJ92-00920A,S5 1
T0117 BN96-01008A ASSY PDP P-I BUFFER BOARD;LJ92-00921A,S5 1
T0118 BN96-01009A ASSY PDP P-J BUFFER BOARD;LJ92-00922A,S5 1
BN96-01010A ASSY PDP P;LJ92-00923A,S50HW-XD03,D66A,D 1
T0119 BN96-01011A ASSY PDP P-LOGIC SUB(RIGHT)BD;LJ92-00959 1
T0037 BN96-01012A ASSY PDP P-LOGIC MAIN BOARD;LJ92-00949A, 1
You can search for the updated part code through ITSELF web site.URL : http://itself.sec.samsung.co.kr
Loc. Code No Description;Specification Q’ty S.N.A
Electrical Parts List
4-2 Samsung Electronics
MEMO
CN1402
NTSC : 3705-001326
R110 NTSC/PAL ADD OPTION
R118, L114 NTSC DELETE
NTSC : 2007-000097 (47K)
R1541
PAL : 2007-000097 (47K)
PAL : 3705-001328
BD1401,C1432 LNA OPTION
R1540NTSC : 2007-001010 (51K)
PAL : 2007-000130 (39K)
1
2 3
4
INSTPAR
L1405
ZD1401RLZ8.2
CN1402
1
2
3
4
RLZ8.2ZD1402
WOOPER
5. Schematic Diagrams
Samsung Electronics
Schematic Diagrams
5-1
5-1 SCARTThis Document can not be used without Samsung’s authorization.
Schematic Diagrams
5-2 Samsung Electronics
5-2 VIDEO SW
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
5-3
5-3 3D COMB
This Document can not be used without Samsung’s authorization.
Schematic Diagrams
5-4 Samsung Electronics
5-4 VPC3230
MAIN
47
47
FLI2310_MAIN DEINTERLACE
FLI2310_MAIN DEINTERLACE
FLI2310_MAIN DEINTERLACE
3.3UH
1K
L402
1uF
C44
0R444
47nFC427
L401
47
3.3U
H
47R
429
R42
7
0.39nFC437
C401100uF
C44547uF16V
R42410K
C418100nF
100nFC425
R4191K
47uF16V
C442
R43315K1/16W
C40
61u
F
C426100pF
C41
71.
5nF
1KR418
10uFC411
R40233
47nFC432
12
3
C443
16V47uF
D403SDS7000
47nFC413
1.5nFC433
0.39nFC428
C44
7
R44010K1/16W
R43
7
1.5n
F
C408
10
Y1
Y238
37Y3
Y434
33Y5
Y632
31Y7
18
YC
OE
Q
1nF
9
VS
UP
CA
P
10
VS
UP
D
69VSUPF
29VSUPLLC
VSUPPA26
52
VS
UP
SY
VSUPY36
62
XT
AL1
XT
AL2
63
40Y0
39
VIN172
73VIN2
VIN374
75VIN4
VOUT70
VREF78
VRT66
VS
57
VS
TB
Y
59
VSUPAI76
45
VS
UP
C
LLC2
56
MS
Y
8
NC
_1
NC
_2
61
3
R1
6
R2
15
RE
SQ
13
SC
L
14
SD
A
16
TE
ST
17
VG
AV
GN
DC
AP
11
GN
DD
GNDF65
GNDLLC30
25GNDPA
GN
DS
Y
51
35GNDY
67I2CSEL
INT
LC
53
ISGND68
LLC128
27
23
FF
OE
22
FF
RE
21
FF
RS
TW
20
FF
WE
58
FP
DA
T
FS
Y
55
2
G1
5
G2
77GNDAI
46
GN
DC
12
C2
47
C3
44
C4
C5
43 42
C6
C7
41
71CIN
24
CLK
20
CLK
5
60
79FB1IN
19
FF
IE
VPC3230D-C5
AISGND80
7
AS
GF
_1
64
AS
GF
_2
54
AV
O
1
B1
4
B2
50
C0
C1
49 48
220n
F
IC401
100pF
C44
8
C41
0
C429
R438
470p
F
C430220nF
100
0.39nFC4151.5nF
C416
100 R441
16V47uF
C419
220nFC414
+9V_R
1.5n
FC
444
C44
647
0pF
Q404KSC1623-Y
B
C
E
16V100uFC434
10K1/16W
100 R439
R445
C422 1uF
+5V_VPC
R442
1.5nF
1K
C44
122
0nF
C431
MO25V100nFC438
1/16W47R403
KSC1623-YQ403
B
C
E
R4221K
47
10pF
R415
C42347uF16V
C403
R4080
220n
FC
439
1.5nFC435
R4311K
6
7 8
MO25V100nFC402
RA401
1 2
3 4
5
15KR405
SDS7000D406
12
3
10pFC409
10KR414
10KR421
10R40
6
C421
16V47uF
R44
747
R4161K
R40
7
+3.3V_R
1.5n
F
47
220n
FC
407
C41
2
47R404
1/16W
R420 47
47R417
R401100
12
3
C405100uF
16V
SDS7000D404
12
3
D405SDS7000
HC-49/SM5H(20.25MHz)
X401
Q0
Q1
12
3
KSC1623-Y
B
C
E
D401SDS7000
C436
Q406
15K1/16W
220nF
R443
+9V_R
R434
10
1/16W10K
1/16W
47R423
R43
5
R446
B
C
E
1K
Q401B
C
E
Q402KSC1623-Y
2
3 4
5 6
7 8
KSC1623-Y
RA402
1
C404100nF25VMO
47R
428
1/16W15KR432
12
3
47
SDS7000D402
R42
6
R43
610
330nFC420
KSC1623-YQ405 B
C
E
1uFC424
R413
15K
15K
10R43
0
R412
10
COMP1_Pr
COMP1_Pb
AV1_B
AV1_G
AV1_R_C
COMP1_Y
R40
9
HOUTVOUT
VPC_Y_MAIN
VPC_C_MAIN
9437_NT
9437_M2
CVBS_TTX
656(0:7)
AV1_BL_IN
656CLK
SDA1
SCL1
ASI_RESET
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
5-5
5-5 PCIN_9883_2151
8EH
This Document can not be used without Samsung’s authorization.
Schematic Diagrams
5-6 Samsung Electronics
5-6 DVI_SIL169
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
5-7
5-7 FLI2310
This Document can not be used without Samsung’s authorization.
Schematic Diagrams
Samsung Electronics5-8
5-8 ASI510
3EH
ASI510
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
5-9
5-9 SDA6001
This Document can not be used without Samsung’s authorization.
5-10 DNIe2
5-10
Schematic Diagrams
Samsung Electronics
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
5-11
5-11 JACK INPUT
This Document can not be used without Samsung’s authorization.
Schematic Diagrams
5-12 Samsung Electronics
5-12 POWER
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
5-13
5-13 AUDIO
NSP6241
This Document can not be used without Samsung’s authorization.
ELECTRONICS
© Samsung Electronics Co., Ltd. May. 2004Printed in KoreaAA82-01607A
This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.