INTENDED USE AND FEATURES

TerminalGLONASS/GPS/GSM

Monitoring of the vehicle state, the location and movements, as well as mileage tracking taking into account the terrain;

Control of fuel consumption and level when connecting impulse, analog and digital fuel level sensors; monitoring and control of the situation in the vehicle cab in using a connected camera;

Monitoring and control of the situation in the vehicle cabin using a connected camera;

Emergency remote reporting about unauthorized auto-entry,mechanical disturbance, robbery of a driver or passengers and other emergency situations;

Remote control of connected devices and systems of the car, for example, sounder, external system of remote engine locking, doors. etc.;

Data reading from the vehicle CAN Bus; processing this data and sending it to the telematics server;

TERMINAL

Two-way radios for hands-free communication with the driver;

Automatic passenger information at stops (geo-zones entrance and exit) via information displays and loudspeaker;

Dual SIM card;

Operation time with built-in rechargeable battery is up to 4 hours when the main power is o�;

Supports up to a 32GB MicroSD card; Supports flexible FLEX Protocol to save bandwidth;

Supports EGTS protocol;

Remote DDD-files upload from Atol, Shtrikh, Mercury, VDO Continental tachographs;

Speaker function with sound files output to line analog output and control of a destination sign;

Working with the tire-pressure monitoring system;

Working with cameras;

Working with driver display;

Determining the current location by LBS information (determining the location using mobile network operator tower).

GLONASS/GPS/GSM beacon

DEVICE ASSIGNMENT

GLONASS/GPS/GSM Beacon is a small hidden device for determining the exact location of the car;

The beacon is small enough to be hidden inside a vehicle, without being connected to the in vehicle network;

In case of theft. The beacon makes it possible to determine the exact location of the car and return it to the Owner.

BEACON

TRACKING

TWO THERMO SIM CARDS FROM DIFFERENT OPERATORS AND A FEW RESERVE DATA CHANNELS

LONG-TERM AUTONOMOUS OPERATION UP TO 3.5 YEARS

SCAN PROTECTION

OPERATION PRINCIPLE

The beacon detects its own location and transmits the location informationvia GSM channels (mobile data and SMS) to the Use. The user can see the location information on the computer screen or mobile phone;

The beacon uses GPS/GLONASS satellite navigation system to determine the location. Even if you have no GPS signal, if the car is in the garage, under a roof, in the underground parking, the device will determine the location using LBS positioning (using the mobile network operator tower);

The device has two SIM-cards from di�erent mobile network operators for data transmission to the User. Two SIM-cards increase the operational reliability and safe data transmission, as the "failures" of one operator are compensated by the work of another;

Most of the time the device is in a "Sleep" mode. In this mode, the beacon does not consume any battery power and does not generate any signals, which keeps it as secure as possible;

The beacon regularly wakes up and notifies the Owner of the location, as well as transmits all information about the device state (battery charge,speed, temperature, etc.). The notification interval isdetermined by the Owner himself. You can increase the interval to seven days, and inemergency cases, when searching for a car, reduce to one minute.