Handbookon the public procurement ofbio-based products and serviceswww.innprobio.eu
2 InnProBio – Forum for Bio-Based Innovation in Public Procurement
ImprintEditor:
Date:
Authors:
Design & Layout:
Image credits:
Disclaimer:
About InnProBio:
More information at:
Agency for Renewable Resources, Germany (FNR)OT Gülzow, Hofplatz 118276 Gülzow-Prüzen, GermanyTel.: +49 3843 / 6930 - 0 | Fax: +49 3843 / 6930 - 102E-mail: [email protected]
December 2017
Fachagentur Nachwachsende Rohstoffe e.V.: Mona-Maria Narra, Moritz WestkämperB.T.G. Biomass Technology Group BV: John Vos, Tijs Lammens, Jurjen SpekreijseUniversity of Hull: Professor Christopher Bovis FRSAPIANOo, the Netherlands Public Procurement Expertise Centre: Carla Dekker and colleaguesUniwersytet Lodzki: Anna Górczyńska, Mateusz IzbickiICLEI European Secretariat GmbH: Amalia Ochoa, Giuliana Longworth, Meritxell Díaz Santos nova-Institut GmbH: Lara Dammer, Luis SarmentoThe Stichting Nederlands Normalisatie – Instituut (NEN): Suzan van Kruchten, Okke-Jaap Prent
Rebekka Dold | Grafik Design & Visuelle Kommunikation | Freiburg, Germany | www.rebekkadold.de
p.1: Aaron Burden, Unsplash | p.4: Roel Bol | p.5: Alex Traksel, Shutterstock | p.10: stokpic, Pixabay | p.11: Skitterphoto, Pixabay | p.12: William Bout, Unsplash | p.15: Beschaffungsamt des BMI | p.18: Free-Photos, Pixabay | p.20: Nik Macmillan, Unsplash | p.21: Elnur, Dreamstime | p.22: donatas1205, Fotolia | p.23: Skarin, Fotolia | p.24(1): RAL gemeinnützige GmbH | p.24(2): Nordic Ecolabelling (Nordic-ecolabel.org) | p.24(3): RAL gemeinnützige GmbH | p.26: Jason Ortego, Unsplash | p.27: Juan Pablo Gonzalez, 123RF | p.29: NG, Unsplash | p.30: Markus Spiske, Unsplash | p.31: Frank Habel, Unsplash | p.33: Stockcreations, Dreamstime | p.34: Africa Studio, Fotolia | p.35: NG, Unsplash | p.40: Nani Williams, Unsplash | p.41 (1): Ross Varrette, Unsplash | p.41(2): T. Stanowicki | p.42(1): Skåne | p.42(2): orzalaga/Julio Cesar Velasquez, Pixabay
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant No 652599. The sole responsibility for any errors or omissions made lies with the editor. The content does not necessarily reflect the opinion of
the European Commission. The European Commission is also not responsible for any use that may be made of the information contained therein.
Launched in March 2015, the European InnProBio project consortium has been raising awareness and increasing the knowledge base of public procurement practitioners about the potential in purchasing products and services made from bio-based materials.
www.innprobio.euwww.tools.innprobio.euTwitter: #InnProBio
3Handbook on the public procurement of bio-based products and services
ContentsForeword ...................................................................................................................................................................... 4Abbreviations / Acronyms ........................................................................................................................................... 4
Part 1: Introduction .................................................................................................................................................... 51.1 What is the bioeconomy? ............................................................................................................................ 51.2 Why promote bio-based procurement? ................................................................................................... 61.3 Viable product categories .......................................................................................................................... 71.4 Advantages and benefits ............................................................................................................................ 91.5 Circular, sustainable and green public procurement ............................................................................ 101.6 Challenges .................................................................................................................................................... 11
Part 2: How to Procure Bio-Based Products and Services ...................................................................................... 132.1 Introduction ................................................................................................................................................. 132.2 Phase 1: Enabling BBPS procurement ...................................................................................................... 14
Procurement Policy and Agenda .............................................................................................................. 14Trial phase ................................................................................................................................................... 14Financing strategy ...................................................................................................................................... 14Risk management ....................................................................................................................................... 15Intellectual Property Rights (IPR) ............................................................................................................. 15
2.3 Phase 2: Pre-procurement and tendering ............................................................................................... 16Needs analysis ............................................................................................................................................ 16Market survey .............................................................................................................................................. 16Market consultation ................................................................................................................................... 16Functional specifications ........................................................................................................................... 17SPP/GPP criteria documents .................................................................................................................... 17Best price - quality ratio ............................................................................................................................. 17Total Cost of Ownership ............................................................................................................................ 18Life cycle costs ............................................................................................................................................ 18
2.4 Phase 3: Procurement procedures ........................................................................................................... 19Variants ........................................................................................................................................................ 19Pre-Commercial Procurement (PCP) ...................................................................................................... 19Competitive dialogue ................................................................................................................................. 19Competitive procedure with negotiation (CPN) .................................................................................... 19Innovation Partnership ............................................................................................................................. 20Design contest ........................................................................................................................................... 20One-on-One Contracting ......................................................................................................................... 20
2.5 Phase 4: Post-procurement stage ............................................................................................................. 21Continuous improvement ........................................................................................................................ 21
Part 3: Tools .............................................................................................................................................................. 223.1 Product database ........................................................................................................................................ 223.2 Certification and labels .............................................................................................................................. 23
Conditions for the use of labels ................................................................................................................ 23Important labels ......................................................................................................................................... 23Multi-issue ecolabels specifying bio-based products ........................................................................... 24Private, third party certifications for different aspects (single issue labels) ...................................... 25Bio-based content ...................................................................................................................................... 25End-of-life options ..................................................................................................................................... 26
3.3 Frequently asked questions ...................................................................................................................... 273.4 Text blocks for tenders .............................................................................................................................. 343.5 Good practice examples ........................................................................................................................... 413.6 Glossary ....................................................................................................................................................... 43
Contact ....................................................................................................................................................................... 44
4 InnProBio – Forum for Bio-Based Innovation in Public Procurement
ForewordIn 2004, when I first came across the ideas of the bio-economy, I could not imagine how
this subject would fascinate and inspire me to this day.
The transition of the economy which is linked to fossil-based products to an economy
based on sustainably produced biomass and its intelligent use is not only unavoidable
for all sorts of reasons, but it also offers many opportunities for the current and
future generations. It fits well within the ideas of sustainable use of raw materials
and it is essential for achieving climate goals and reducing dependence on coal and
petroleum. At the same time, we see spectacular developments in agriculture, forestry
and aquaculture as well as in the processing industry, which, combined with years of
research and development, lead to the introduction of many new non-food products and materials. Not at the expense of the
necessary food production and other traditional uses of biomass, but in addition to that.
We see that the transition to a bioeconomy is underway worldwide. Meanwhile, in my work within the Dutch government as
Director of Bio-based Economy and now at the Federation of Bio-economics Netherlands, I note that targeted actions can
accelerate this transition. In this way, we in Europe can get a global position in the bioeconomy if cooperate well and respond to
developments in the market. Public procurement can play an important role in developing new markets, and can also provide a
stable investment climate for bio-based products and services.
A wonderful example of cross-border cooperation I think is the forum for bio-based innovation in public procurement - InnProBio.
In this forum, with parties from Germany, the UK, Poland and the Netherlands, this Handbook has been drafted with great
effort and commitment. I am convinced that this handbook will find its way to the target group and will enable procurement
professionals to contribute substantially to the market development of the bio-economy.
Roel P J BolFederation Bio-economy Netherlands
Abbreviations / Acronyms:
ASTM – American Society for Testing Materials, a voluntary standards developing organizationBBPS – Bio-Based Products and ServicesCEN TS – European Committee for Standardisation Technical SpecificationCPN – Competitive Procedure with NegotiationCPP – Circular Public ProcurementCPV – Common Procurement VocabularyDST – Decision Support ToolEASME – Executive Agency for Small and Medium-size Enterprises EC – European CommissionEU – European UnionFAQ – Frequently Asked QuestionsGHG – Greenhouse GasGPP – Green Public ProcurementInnProBio – Forum for bio-based innovation in public procurement (Horizon 2020 project) PP – Public ProcurementIPR – Intellectual Pproperty Rights
LCA – Life Cycle AssessmentLCC – Life Cycle CostingMEAT – Most Economically Advantageous TenderNEN – The Stichting Nederlands Normalisatie – Instituut, Netherlands standardisation instituteOpenBio – Opening bio-based markets via standards, labelling and procurement (FP7 project, 2013-2016)PCP – Pre-Commercial ProcurementPPI – Public Procurement of InnovationR&D – Research and DevelopmentRED – Renewable Energy DirectiveSPP – Sustainable Public ProcurementRSB – Roundtable on Sustainable BiomaterialsRTRS – Roundtable Responsible SoySME – Small and medium-sized enterpriseTCO – Total Cost of OwnershipWWF – World Wide Fund For Nature
5Handbook on the public procurement of bio-based products and services
Part 1: IntroductionMany of the products people use on a daily basis are made from fossil raw materials. However, ‘bio-based’
alternatives for these products are available at an increased rate. Bio-based products are an important step
in the transition to the bioeconomy. In the bioeconomy renewable biological resources (“biomass”) replace
fossil raw materials. Bio-based products are products that are wholly or partly made from biomass (European
Standard EN 16575:2014 ‘Bio-based products – Vocabulary’).
1.1 WHAT IS THE BIOECONOMY?
Bioeconomy is a spectrum of economic activities which
depart from fossil-based materials. In accordance with the
European Commission, bioeconomy refers to the production
and extraction of renewable biological resources (known as
‘biomass’) and their conversion into food and feed; bio-based
products (such as timber, fibre, chemicals or bioplastics)
and bioenergy (for instance through firewood, biofuels
or biogas). In the European Union (EU), the bioeconomy
sector has an annual turnover of about 2.1 € trillion (a 2008-
2014 average) and employs 18.6 million people (in 2014)
constituting about 8.5 % of the jobs in all economic sectors.1
Although primarily based on activities that have been
carried out, in some form or another, for many centuries,
such as farming, fisheries or forestry, bioeconomy emerged
in the past decade as a knowledge-driven concept aimed at
meeting a number of current legal and policy challenges,
primarily related to the protection of the environment and
emissions reduction but also covering fields such as research
and development and innovation. Bioeconomy embraces a
wide range of economic sectors, in particular agriculture,
forestry, fisheries, food processing, energy, pulp and paper,
chemicals and biotechnology.
The bioeconomy spans numerous policy areas, including
industry and energy, agriculture, forestry, fisheries and
marine resources, climate and environment, science and
research and development. The transition from a fossil-
based economy to a bio-based economy can only be
successful and sustainable if it ensures the protection of
food supply, the environment, climate and biodiversity and if
it deals effectively with potential side effects such as loss in
soil fertility, hydrologic imbalance and climate change.
1 https://biobs.jrc.ec.europa.eu/sites/default/files/files/JRC_Bioeconomy_Report2016.pdf
6 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Overall, there are four principles the sustainable bioeconomy
should comply with: 2
• Principle of priority for food security: Food security takes
priority over the production of raw materials for industry
and energy. Support must be given to the use of synergy
effects between food production and the provision of
raw materials for energy and industry.
• Principle of priority for biomass: Where possible and
purposeful, the objective is to cascade the use and
combined use of biomass. The cascade of use and
intelligent interlinking of value chains or process chains
in biomass respectively can improve resource efficiency,
defuse possible areas of competition among paths of use
and make use of innovation potential.
• Principle of standards harmonisation: The bioeconomy
needs to take into account increasingly challenging
requirements placed upon the way in which goods and
commodities are produced. This applies predominantly
to standards governing the protection of the environment,
nature, and animals, and also compliance with standards
of social responsibility.
• Principle of co-operation: In developing the bioeconomy
there is a need for tightly-knit cooperation between all
stakeholders involved, from the political, economic,
scientific, and environmental spheres and from civic
society.
(Based on the National Policy Strategy on Bioeconomy,
Federal Ministry of Food and Agriculture, Germany)3
1.2 WHY PROMOTE BIO-BASED PROCUREMENT?
Drivers of the bio-economy include sustainability, economic
opportunities for new products, energy and raw materials
security, and improvement of the local and regional
economy, particularly the agro-economy. On the basis of
accepting that bio-based products can offer significant
advantages with their use and application, it is logical that
public authorities could set an example, especially in those
application categories where a significant portion of public
spending goes to.
Since the current market in bio-based products and services
is still small, public authorities could provide a platform by
functioning as lead customer and increasing demand and
thereby strengthening the market for bio-based products
and services.
In doing so, public authorities in their procurement function
must be transparent and objective in their assessment of
products and services and offer bio-based products and
services a fair and equal chance within public procurement
procedures.
Examples of such function of public authorities as
procurement platforms include the encouragement for the
use of cleaning agents for cleaning services and packaging
and disposable cups in catering services. Often, the use
of bio-based products and services amounts to a small
proportion of the total costs of a service, however, by
requiring this in a tender when procuring these services,
demand for bio-based products can be increased.
2,3 http://www.bmel.de/SharedDocs/Downloads/EN/Publications/NatPolicyStrategyBioeconomy.pdf?__blob=publicationFile
7Handbook on the public procurement of bio-based products and services
1.3 VIABLE PRODUCT CATEGORIES
The following categories are relevant for procurement of innovative bio-based products and services (BBPS). The categories
represent a significant portion of public spending, have a potential for BBPS and already have multiple alternative innovative
BBPS available. They have been cross-checked on availability, applicability and completeness.
Procurement sector Bio-based products
Food, CATerIng And evenTS Disposable cups and tableware from bio-based polymers
Packaging materials and utensils from bio-based polymers
HoSPITAlS And lABorATorIeS Disposable lab materials: tubes, gloves, petri dishes
Disposable nursing articles: bedpans, urinals, gloves, bed sheets, towels
CloTHeS And TexTIleS
Textiles for public personnel
ICT & oFFICe SuPPlIeS Office supplies from bio-based composites
Toner for cartridge
veHICleS And moBIlITy Tyres from natural rubber from dandelions or other innovative materials
Light weight automobile interior parts
Bio-based lubricants for vehicles and tools
Under the hood parts of bio-based polymers
Upholstery of soybean foams
Floor mats of bio-based polymers
Textiles for seating
CleAnIng, HygIene & SAnITAry Bio-based cleaning detergents including bio-based surfactants
Biodegradable plastic bags for disposal & other materials
relevant for hygiene
8 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Procurement sector Bio-based products
InFrASTruCTure:ConSTruCTIon mATerIAlS
Road construction materials: asphalt, bio-asphalt, binder
Various elements for roads: guide rail, lampposts, sound barrier, railings
Concrete casting
Sewerage: Pipes from bio-based PVC
Street furniture: bins, benches, picnic tables
Road and street signs
Bridges and viaducts: construction materials
Concrete: bio-based filler, reinforcement, hemp concrete
BuIldIngS:ConSTruCTIon mATerIAlS
Wooden-frame construction
Bio-based insulation
Decking
Façade panels
Bio-based paints and varnishes
Various bio-based indoor products for buildings
FurnITure & Indoor InTerIorS
Office furniture from bio-based composites
Office upholstery and carpets from bio-based polymer fibres
Other innovative bio-based man-made textiles for interior
gArdenIng & lAndSCAPIng Biodegradable bio-based pots and seeding beds
Clips and binders from biodegradable bio-polymers
Erosion mats and geotextiles
Gardening tools with removable plastic parts
Drainage and pipes
Valorising waste streams from gardening
9Handbook on the public procurement of bio-based products and services
According to the recently published bio-based procurement guidance by the EC Executive Agency for Small and Medium-
size Enterprises (EASME) a set of Factsheets with detailed product information has been prepared for the procurement
sectors ‘Infrastructure: Construction materials’ and ‘gardening and landscaping’. These can be accessed at: http://www.
biobasedinprocurement.eu/.
1.4 ADVANTAGES AND BENEFITS
The increased and intense industrial and individual use of and reliance upon fossil raw-materials has placed the environment
under threat. As a result, the security of the earth’s climate is one of the biggest tasks for the future. The increasing depletion and
volatile prices of fossil raw materials are further reasons to look for alternatives. One opportunity to overcome the dependency
on fossil fuels and to help mitigate climate change is the increased use of renewable raw materials from agriculture and forestry
for the production and use of bio-based products and services.
By order of the EC Executive Agency for Small and Medium-size Enterprises (EASME) Royal HaskoningDHV has developed
a guidance document which discusses general and specific advantages and benefits of bio-based products in procurement.
Potential general benefits of using bio-based products in procurement are related to the bio-based nature of the products, and
include for example:
• Improved resource efficiency
• Reduced dependency on or even avoidance of the use of fossil resources
• Reduced Greenhouse Gas (GHG) emissions and avoidance of GHG emissions
• Help public authorities to achieve their environmental targets and contribute to policy priorities
• Raise awareness of environmental issues
• Achieving social goals and improving people’s quality of life
• Driver of innovation
• Driver of the secondary material market and circular economy
Furthermore BBPS play an important role in a circular economy. In a perfectly functioning circular economy, there is total
elimination of waste. Wastage of raw materials is prevented by maximising the reusability of products and materials and by
minimising value destruction. This differs from the current linear system, in which raw materials are converted into products
that are usually discarded at the end of their service life. For a more detailed description of the terms “circular economy” and
“bio-based economy”, please refer to InnProBio Factsheet #4.
Factsheet #4:“Bio-based Products and Services in the Circular Economy”
For more information on bio-based products and services in the circular economy, please refer to the InnProBio Factsheet #4 “Bio-based Products and Services in the Circular Economy” which can be accessed at:http://innprobio.innovation-procurement.org/bio-based-products-services/factsheets/
10 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Specific benefits of procuring bio-based products differ from
case to case. Examples of specific benefits are: 4
• Financial efficiency (lower total cost of ownership)
• Benefit from (better) biodegradability
• Product capabilities such as improved strength, flexibility
or applicability
Specific benefits need to be assessed on a case by case basis.
Bio-based procurement demands a well-informed and critical
public procurement professional and procurement process.
The current document and associated online Decision
Support Tool (http://www.biobasedconsultancy.com), and the
recently published bio-based procurement guidance prepared
for EASME (http://www.biobasedinprocurement.eu/) aim to
support this.
4 Source: A guidance on bio-based products in procurement, http://www.biobasedinprocurement.eu/5 PIANOo, https://www.pianoo.nl/public-procurement-in-the-netherlands/sustainable-public-procurement-spp/spp-themes/circular-procurement, 20166 European Commission, Directorate-General Environment, http://ec.europa.eu/environment/gpp/versus_en.htm
Bio-based products and services play an important role
in 'circular' public procurement, 'sustainable' public
procurement, and in 'green' public procurement.
Circular Public Procurement (CPP) enables the purchasing
party to help ensure that, at the end of their service life or
useful life, products or materials will be re-used effectively in
a new cycle. CPP presupposes a different, more functional
view on demand. As a result, the concept of “ownership” is
seen in an entirely different light. Alternative revenue models
such as product-as-a-service offers or sale-repurchase
agreements can be useful here.5
Sustainable Public Procurement (SPP) is a process by
which the purchasing party seeks to achieve the appropriate
balance between the three pillars of sustainable development
– economic, social and environmental – when procuring
goods, services or works at all stages of a project.
green Public Procurement (gPP) is implemented by many
public authorities in the EU as part of a broader approach to
sustainability in their operations. GPP is defined as “a process
whereby public authorities seek to procure goods, services
and works with a reduced environmental impact throughout
their life cycle when compared to goods, services and works
with the same primary function that would otherwise be
procured.”6
These different ‘versions’ of public procurement are all
about influencing the market. By using their purchasing
power to choose goods and services with lower impacts on
the environment, public procurers can make an important
contribution to sustainable production, consumption and
re-use. Public authorities can provide market actors with real
incentives for developing green technologies and products.
In some sectors, public purchasers command a significant
share of the market (e.g. public transport and construction,
health services and education) and so their decisions have
considerable impact.
In conclusion: The procurement of bio-based products and
services is a complementary and not a competing approach
to Circular, Sustainable and Green Public Procurement.
Despite their different names and different focus, all these
approaches to public procurement go hand in hand, and bio-
based products can play a role in all of them.
1.5 CIRCULAR, SUSTAINABLE AND GREEN PUBLIC PROCUREMENT
11Handbook on the public procurement of bio-based products and services
1.6 CHALLENGES
Procurement in general is much broader than the purchasing
activities of the procurement departments. A broader
organisational picture is needed involving senior elected
members, heads of units, functional specialists, policy
makers, senior managers, budget holders, project leaders,
etc. It’s not only the task of procurers to respond to the
many increasingly complex policy agendas (such as SMEs,
innovation, sustainability) that procurement is expected to
deliver when procurers have limited influence over some
policies. Commitment of higher level management for
the implementation of bio-based products and services
in procurement can be a strong driver for implementation
within an organisation. This helps to ensure the necessary
cooperation between departments. Such commitment can
take the format of a policy or strategy of a public organisation.
A broader organisational view of procurement needs to
be established which is important to keep in mind when
procuring BBPS. Since bio-based products and services are
often and initially more expensive when compared to similar
fossil-based products and services, and some even require a
new method for their application or working, the involvement
of all stakeholders and actors in the procurement process
and purchasing or acquisition decision-making is imperative.
Politicians may want to set an ambition, so procurement of
BBPS fits within the policy and implementation framework
for public service delivery. Project leaders and specialists
need to be aware of the possibilities, technical capacity and
specifications of bio-based products and services. Finally,
the involvement and engagement of the market is crucial to
get a complete overview of the possibilities and challenges in
BBPS public procurement.
By making use of existing networks, such as InnProBio,
and available learning and knowledge, the uptake of bio-
based products and services in public procurement can be
advanced.
In order to create a knowledge base, meaningful and
constructive market engagement is crucial. Market
intelligence about potential bio-based products and services
available is essential for any public sector procurement
strategy and implementation of public service delivery.7
Budget holders in public authorities need to develop revenue
models based on assumptions which are underpinned by
‘lower costs’ instead of ‘lower price’.
Another challenge for the public authorities is to give bio-
based products and services a fair and equitable treatment
during the procurement process. The evaluation of bio-based
products and services is a major challenge alongside the
determination of their specifications, being either technical
or functional. Finally, the award criteria for public contracts
related to the provision of public services which are based
on or contain bio-based products and services is the most
significant challenge.
7 A guidance on bio-based products in procurement, http://www.biobasedinprocurement.eu/
12 InnProBio – Forum for Bio-Based Innovation in Public Procurement
These challenges require the right procurement strategy for a
public authority. In a mature and competitive market, public
authorities may clearly determine in the subject matter of
the contract their willingness to use bio-based products and
services. In a market with limited competition a functional
determination of the needs of the public authority could be
an optimal plan to overcome such challenges.
In order to increase the capacity of public procurers and
decision makers in the procurement of innovative bio-
based products and services, regional workshops have been
held within the InnProBio project. The sessions were open
to participants from all EU Member States and primarily
targeted to leaders in public procurement to ensure the
development of knowledge cascade and build up a European
network.
To improve the market knowledge of public procurers and
in order to improve the understanding of public needs by
suppliers of BBPS, regional market dialogues were planned
and held in the framework of the InnProBio project in
the Netherlands, Germany and Poland. In these market
dialogues, suppliers of valuable innovative BBPS and public
procurers participated in order to strengthen the dialogue
between public procurers and suppliers of BBPS, identify
barriers to the procurement of BBPS and gather valuable
information for future PPIs on BBPS.
The relevant information from these meetings has been
published on the InnProBio website, which is available at
http://innprobio.innovation-procurement.org/bio-based-
products-services/workshops-and-market-dialogues/.
13Handbook on the public procurement of bio-based products and services
Part 2: How to Procure Bio-Based Products and Services2.1 INTRODUCTION
Certain instruments that exist in the context of public
procurement of innovation are especially helpful when it
comes to procuring bio-based products and services. An
inventory was made of the available instruments, and they
were grouped on the basis of four different phases of the
procurement process.
Figure 1: Scheme of a Procedural Roadmap of the procurement process
Figure 1 shows a procedural roadmap of the procurement
process. This chapter discusses what instruments are
the most relevant at each phase, and shows how they are
relevant to foster the procurement of bio-based products
and services.
Procurement process in four phases
BuSIneSS STrATegy
eSTABlISH need
1. Enabling procurement of bio-based products and services
develoP need
develoP ProCuremenT STrATegy
2. Pre-procurement and preparation of tenders
ComPeTITIve ProCuremenT
AwArd / ImPlemenT ConTrACT
3. Procurement procedures
mAnAge ConTrACT
CloSure
4. Post-procurement stage
14 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Procurement Policy and Agenda
Procurement policy or a procurement agenda (or plan)
describes the purchasing needs that have priority for the
foreseeable future on the part of a public authority or a
public organisation. The agenda helps the public authority
or organisation identify the internal process in engaging with
the private sector in delivering public services by projecting
the status and operation of the external market. The agenda
reveals the dynamics of the external market, parties such
as suppliers, current and new concepts in public service
delivery, specific products and services that could be needed
in the future. It is an open invitation to participate in the
innovation process. A procurement agenda must always
be representative of the mission, vision and goals of an
organisation.
It is in the procurement policy and agenda that clear targets
and future needs with regard to bio-based procurements
can be addressed. Added value of bio-based procurement
compared to traditional solutions are e.g. regional values
(forestry and agricultural), regional economic values, CO2
and other greenhouse gas emission reduction potential,
resource saving and waste prevention. A procurement plan
will give procurers the necessary political and legal backing
to specify for BBPS in procurements.
Trial phase
A trial phase is a demonstration used for testing innovative
solutions for a public authority or organisation. A trial
phase could be at a physical location, such as a street or
building, but it could also be within a laboratory or a digital
environment. As the contracting authority, the organisation
should decide the product or service requirements that the
tenderers must observe during the procurement process.
A trial phase is useful where a demonstration is the only way
to determine the working or appropriateness of a solution.
This may be the case if the real-life situation is so complex that
it cannot be replicated in laboratory conditions. A trial phase
gives suppliers the opportunity to prove the effectiveness
of their innovations in a real-life situation. Trial phases are
very important for bio-based and other innovative products,
because new products need to establish a track record of
demonstration, workability and effectiveness.
Financing strategy
A financing strategy helps the public authority or organisation
decide on the best opportunities and instruments to deploy
for an innovation project and what type of risks should
be assessed in the event of financing innovation through
public procurement. Based on the budget available for
2.2 PHASE 1: ENABLING BBPS PROCUREMENT
What is important in this phase is the mapping of existing procurement needs and other related purchasing instruments in order
to assess if and how they can be relied upon to enable the inclusion of bio-based products and services during the procurement
procedures. Below we discuss the most relevant instruments for this phase and show how pertinent they are to foster the
procurement of bio-based products and services.
• Procurement Policy and Agenda
• Trial phase
• Financing strategy
• Risk Management
• Intellectual Property Rights (IPR)
15Handbook on the public procurement of bio-based products and services
such a purchase, the choice for the contracting authority /
public organisation varies from existing financing options
and instruments to innovative choices of private finance
through concessions for the delivery of a particular public
service. Financing strategy is related to the price for the
product and services and not to the specific product in
question. Therefore, as long as the procurement of bio-
based products and services is financially comparable to the
procurement of traditional products, the financing strategy
should not eliminate such products and services from future
procurement exercises.
Risk management
The aim of risk management is to identify and manage all
potential risks involved in public procurement on the party
of public authorities / organisations. It helps to quantify risks
and to take measures to prevent negative consequences
by monitoring risks. One method of conducting risk
management that is frequently used is by drawing up and
keeping up-to-date a ‘risk register’.
Innovation in public procurement involves various risks,
especially if there is to be a tendering process. There are risks
attached, for example, to technical, commercial, contractual
and performance-related issues. The risks involved in the
procurement of innovative products and services are greater,
because innovation is often associated with unknown and
untested products or solution and as a result it attracts a
greater risk of failure. Risk management attempts to manage
these risks and reduce the chance and implications of failure.
Intellectual Property Rights (IPR)
IPR refers to the creation of the mind such as inventions,
literally and artistic works, design and symbols, names and
images used in commerce. Outcomes of new technical
solutions and innovative knowledge can be protected by
IPR (e.g. copyrights and neighbouring rights, patents, trade
secrets incl. know-how, design related rights). The parties of
the public procurement contract shall define in the beginning
of the process who will own and commercially exploit the IPR.
IPR are typically the matter of concern when procuring
innovative products. When it comes to the agreement
between the parties the most important issue is to govern
the allocation (by licensing and royalties) or the shared
ownership of these rights. These issues have no specific
implications in terms of the application of BBPS.
16 InnProBio – Forum for Bio-Based Innovation in Public Procurement
2.3 PHASE 2: PRE-PROCUREMENT AND TENDERING
This is the stage before the formal tendering phase where procurers have the possibility to engage with the market. Below we
discuss the most relevant instruments for this phase and show how relevant they are to foster the procurement of bio-based
products and services.
• Needs analysis
• Market survey
• Market consultation
• Functional specifications
• SPP/GPP criteria documents
• Best Price Quality Ratio
• Total Cost of Ownership
• Life cycle costs
Needs analysis
A need analysis is an investigation into a business case which
contains the specific requirements of a public organisation.
It ensures that any tendering process will focus on a solution
to the exact problem.
Before the procurement of a product or service, it is important
to determine the precise need of a public organisation and
also the recipient of the product or service envisaged to be
procured.
The need analysis constitutes the basis of the procurement
decision. This is a crucial step that could encourage
innovation and the application of BBPS. Awareness raising
and the dissemination of good practices are important to
provide information on the available bio-based substitutes,
legal possibilities and budget relevance.
Market survey
A market survey is a process where a public organisation
acquires knowledge of what the market can offer and gathers
a critical understanding of the potential supply chains. A
market survey can help answer a range of questions when
preparing for a procurement exercise, such as: is the solution
the public organsiation seeks already in the market, or is it
still under development? What are the available solutions?
Who are the potential tenderers? And what is the unit/price
ratio? Is it possible to combine existing solutions? What do
tenderers claim to be the advantages and disadvantages
of their solutions? Is Innovation Procurement an attractive
option, or would it be better to choose a currently-used
solution?
The introduction of bio-based products and services will
often involve new market actors/suppliers. Therefore it is
important to get more information on this market so that
more realistic tender requirements can be formulated/
applied. A general market survey template could be fine-
tuned for the purposes of the application of bio-based
products and services in procurements.
Market consultation
This is a way of consulting market parties about a proposed
tender. With the gained knowledge you are able to better
formulate your need. As desktop research cannot answer all
questions about the knowledge and opportunities offered
by the market it is wise to put additional questions to
17Handbook on the public procurement of bio-based products and services
market parties. What, for example, would be a good way of
formulating the request? Is the request ambitious enough
and at the same time feasible for the market? What should
be included in, or left out of, the Schedule of Requirements?
A market consultation can answer these questions. You
could also further research how you could work with the
market and what the benefits of purchasing an innovative
solution may be.
The market consultation should discuss the possibilities of
existing and innovative bio-based products and services
under development that can fulfil your need.
Functional specifications
A functional specification is a method of determining the
performance of a product or a service by reference to its
functions and features in cases where reference to standards
is not possible.
Functional specifications are useful instruments if a procurer
anticipates that a supplier could offer added value to the
procurement process by means of, for example, providing
innovative or new products, services or solutions. They
are also useful in procurement procedures where public
authorities or organisations wish to encourage innovation.
Functional specifications provide a wide spectrum of
action for the tenderers during the procurement process
to determine the best possible solution for an organisation,
which is often a solution not previously considered.
SPP/GPP criteria documents
Green Public Procurement (GPP) means that public
authorities seek to purchase goods, services and works
with a reduced environmental impact throughout their life-
cycle compared to goods, services and works with the same
primary function which would otherwise be procured.
Sustainable Public Procurement (SPP) is a process by which
public authorities seek to achieve the appropriate balance
between the three pillars of sustainable development –
economic, social and environmental – when procuring
goods, services or works at all stages of the project.
The EU GPP criteria are developed to facilitate the inclusion
of green/sustainable requirements in public procurement
tenders. The basic concept of GPP relies on having clear,
verifiable, justifiable and ambitious environmental criteria for
products and services, based on a life-cycle approach and a
scientific evidence base.
When it comes to the application of bio-based products and
services in public procurements it is crucial to address the
issue of environmental sustainability first at policy level and
later in the practical implementation of the procurement.
Special attention has to be made to the upcoming CEN
standard. It is important to show a clear link to the procurers
that the bio-based products and services that they purchase
comply with established GPP criteria. To this end further
LCAs have to be made.
Best price - quality ratio
According to the New Public Procurement Directives
2014/24/EU and 2014/25/EU public contracts must be
awarded on the basis of the MEAT (most economically
advantageous tender). There are two options for awarding
the contract on the basis of MEAT: either the best quality-
price ratio or the price only. The best quality-price ratio
means that the award criteria are determined and designed
by the contracting authority so that they include both quality
and costs elements.
The assessment whether this instrument is important for
the procurement of BBPS depends on the specific contract
in question. Qualitative award criteria however could allow
the contracting authorities to target those areas that are
important to them and their needs. One of the requirements
related to the award criteria is that it has to be linked to the
subject matter of the contract. Due to this legal requirement,
inclusion of bio-based products in the procurement
process must be determined at the drafting of the technical
specifications.
18 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Total Cost of Ownership
Total Cost of Ownership (TCO) refers to the cost contracting
authorities are expected to incur throughout the entire life
cycle of the purchase. Having regard to the TCO, alongside
the financial aspects of the purchase, contracting authorities
can also weigh up the related environmental aspects.
Contracting authorities should consider the TCO to
determine a smarter purchase by looking at the total life
cycle costs (LCC) of a product or service. In Sustainable
Public Procurement (SPP) the initial costs may be higher,
for example, because other materials are used or because
a maintenance-free or low-energy design is used. However,
these higher initial costs can be compensated for over time
by lower running costs and maintenance costs, for example,
by lower energy consumption or extended life of a product or
work. Also the end-of-life costs may be lower.
By considering the costs for purchase, maintenance and
disposal, "price" will be seen different when comparing
several tenders. By applying the TCO, an innovation
requiring a higher initial investment gets a fair chance in the
procurement process.
Life cycle costs
Life-cycle costing (LCC) indicates a methodology which
considers all the costs that will be incurred during the
lifetime of the product, work or service:
• Purchase price and all associated costs (delivery,
installation, insurance, etc.)
• Operating costs, including energy, fuel and water use,
spares, and maintenance
• End-of-life costs, such as decommissioning or disposal
LCC makes good sense regardless of a public authority’s
environmental objectives. By applying LCC public purchasers
take into account the costs of resource use, maintenance
and disposal which are not reflected in the purchase price.
Often this will lead to ‘win-win’ situations whereby a greener
(bio-based) product, work or service is also cheaper overall.
The main potential for savings over the life-cycle of a good,
work or service are:
• Savings on use of energy, water and fuel
• Savings on maintenance and replacement
• Savings on disposal costs
19Handbook on the public procurement of bio-based products and services
Variants
The contracting authority may allow the submission of
offers which deviate from the contract specifications but
can still be regarded as fulfilling the subject matter of the
contract. The contracting authority must declare in the
invitation to tender whether bidders may submit variant
offers or alternative specifications. Variants allow for value
engineering and recognize the importance of innovation in
public procurement.
Pre-Commercial Procurement (PCP)
If contracting authorities need something that doesn’t yet
exist, they can engage businesses to develop a prototype
by awarding contracts for research & development (R&D)
services. This gives them greater freedom than in the case
of a usual tender.
Pre-commercial procurement (PCP, developed by the
European Commission) is a method to take advantage of
such freedom, the basis for each of which is the same: you
award several parties a contract to develop an innovative
solution in competition with each other. There are various
rounds which each involve the elimination of parties. After
the final phase at least two prototypes are developed and
tested. PCP is relevant if a bio-based solution you want to
purchase is not yet available on the market.
Competitive dialogue
A competitive dialogue is a way of tendering whereby
contracting authorities enter into a structured dialogue
with a number of selected and prequalified candidates to
identified a common solution and its financing before that
solution is put out to tender amongst the relevant candidates.
Competition-sensitive information will remain confidential.
After the structured dialogue process that usually requires
significant investment from the participating parties, the
contract is awarded to the preferred bidder.
Competitive dialogue is relevant if a bio-based solution is
required by contracting authorities.
Competitive procedure with negotiation (CPN)
The Competitive procedure with negotiation (CPN) has been
introduced into Directives 2014/24/EU and 2014/25/EU to
replace the previous instrument of negotiated procedure with
the publication of the prior information notice. CPN allows
the contracting authorities to refine their requirements and
purchase the products, services, works that are tailored to
both their needs and budget.
CPN is relevant if contracting authorities need to negotiate
the procurement and delivery of a bio-based solution.
2.4 PHASE 3: PROCUREMENT PROCEDURES
Choosing the adequate contract award procedure is a key stage in every procurement process. Below we discuss different
procedures and procurement instruments with their relevance to the procurement of bio-based products and services.
• Allow for variants
• Pre-commercial procurement
• Competitive dialogue
• Competitive procedure with negotiation (CPN)
• Innovation Partnership
• Design contest
• One-on-one contracting
20 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Innovation Partnership
A new procedure is introduced by the Directives 2014/24/
EU and 2014/25/EU. It is aiming at the development and
purchase of new and innovative products, services and
works provided that such innovative product or service or
innovative works can be delivered to agreed performance
levels and costs. The procedure applies elements of the
competitive procedure with negotiation with the aim to
establish a partnership with one or more suppliers. This
instrument enables the contracting authority to procure
from the beginning of R&D activities as well as it allows the
acquisition of commercial scale.
Innovation Partnership offers the public buyers the chance
to take advantage of new technologies and to apply the
benefits of research and development activities. However
the instrument is in its early days having been adopted
only recently. Thus the possible relevance of Innovation
Partnership on the procurement of BBPS would be seen at a
later stage of the application of the new procurement rules.
Design contest
A design contest is a way of bringing new ideas or concepts
onto the market. Contracting authorities formulate a
challenge and award a prize to the parties that submit the
best solutions. The ideas are assessed by an independent
jury. A design contest is a form of tendering that offers a
wide scope for creativity.
The submitted designs can actually be implemented
or can serve as inspiration (even if they are not actually
implemented). A design contest is also a good way of
generating a relatively large amount of publicity about a
theme with modest expense.
Although design contests are most used for architectural
purposes the Directives 2014/24/EU and 2014/25/EU make
it possible to use them to engineering and data processing
purposes as well.
One-on-One Contracting
Single tender procurement is exceptionally allowed under
negotiated procedures without prior notification. Negotiated
procedures without prior notification may be conducted
in one single round. Contracting authorities are allowed to
choose whichever contractor they want, begin negotiations
directly with this contractor and award the contract to him.
The Directive provides for only a few rules with which this
procedure must comply. A prior notice in the Official Journal
is not required. Grounds for using negotiated procedure
without prior advertisement include:
• Research and development;
• Technical or artistic reasons;
• Reasons connected with the protection of exclusive
rights;
• Extreme urgency brought by unforeseeable events not
attributable to the contracting authorities;
• Additional deliveries and supplies or works which
would cause disproportionate technical operational and
maintenance difficulties, if tendered.
21Handbook on the public procurement of bio-based products and services
2.5 PHASE 4: POST-PROCUREMENT STAGE
The stage starts when the procurement contract has been signed. The goal is to encompass ongoing innovation into the
procurement contract and to foster the continuous uptake of the most innovative bio-based products and services.
Continuous improvement
‘Continuous improvement’ is designed to encourage a
supplier to come up with better solutions during the term
of a contract. Opportunities and incentives to do so must
be included at the outset in the contract. In addition, it is
necessary to agree terms how to collaborate in order to allow
room for improvements. In doing so, contracting authorities
increase the mutual trust between the procurer and the
supplier and lower the threshold for innovative proposals.
The goal of continuous improvement is to make optimum
use of the new opportunities for your suppliers so that the
supplier continuously can improve its supply or service.
This is especially appropriate for long-term contracts in
which you expect new solutions to become available during
the term of the contract.
Contracting authorities can ask suppliers to gradually change
from non-bio-based products to bio-based products when
they become available and can fulfil the same needs. This
gradually introducing bio-based products lowers the risks for
both parties and gives them the opportunity to get familiar
with the new products.
22 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Part 3: ToolsInnProBio has created several tools to support the procurement of bio-based products and services (BBPS).
These tools are integrated into an Internet-platform, known as the Decision Support Tool (DST) where the
comprehensive content of each tool can be accessed. In the current chapter we present a selection of the
tools included in the DST i.e. Glossary, Product Database, Certification & Labels, Frequently Asked Questions
(FAQs), Text blocks for tenders and Good Practice examples.
3.1 PRODUCT DATABASE
A database of BBPS, initiated by the earlier FP7 project
‘Open-Bio’ and streamlined and expanded in the InnProBio
project, presents various bio-based products which are
relevant for public procurers, sorted by application area,
product type and Common Procurement Vocabulary Code
(CPV). Products are grouped into 9 different categories
and include e.g. office supplies, gardening equipment,
lubricants or plastics plates and cutlery. In the database
(https://www.biobasedconsultancy.com/en/database), users
find information about the bio-based content of products,
sustainability, functionality and end-of-life aspects, such
as biodegradability. Where available, claims are supported
by references to standards, technical sheets and labels.
The database can be used as an entrance portal for market
research in order to widen the public procurement product
portfolio beyond conventional fossil-based products.
23Handbook on the public procurement of bio-based products and services
• To accept other appropriate means of proof (such as
a technical dossier proving that a tenderer meets the
requirements), if an entrepreneur:
a. Shows that he or she has not had the opportunity to
acquire the specific label or a similar mark within the time
limits specified by the contracting authority for reasons
that cannot be imputed to him or her, and
b. Shows that the works, deliveries or services to be provided
meet the specific label or the specific requirements
specified by the contracting authority.
As stated above, there are strict conditions attached to the
demands of a label. A label that demands on issues that
are not relevant to a task, such as requirements on general
company policy, contracting authorities may not require. In
that case, contracting authorities can still define technical
specifications by reference to the detailed specifications of
that label or parts that do relate to the subject of the contract.
The label can then be used as evidence to establish that the
tender meets the required specifications.
Conditions for the use of labels
The label requirements:
• Must be proportionate. All requirements must relate to
the subject of the contract;
• Must be based on objectively verifiable and non-
discriminatory criteria;
• Are set by a third party over whom the economic
operator applying for the label, does not exercise decisive
influence.
The label is:
• Established in an open and transparent process open to
all stakeholders;
• Accessible to all interested parties.
Contracting authorities should consider:
• If prescribing a label is proportional. Obtaining a
certification mark provides administrative burden for
entrepreneurs and sometimes brings considerable costs
involved;
• If prescribing a label does not hinder innovation.
Contracting authorities are obliged:
• To accept similar labels;
8 Directive 2014/24/EU of the European Parliament and of the Council of 26 February 2014 on public procurement and repealing Directive 2004/18/EC, http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=uriserv:OJ.L_.2014.094.01.0065.01.ENG
9 A certification scheme describes the ‘rules’ for certification including the tasks and responsibilities of the applicant, testing laboratory and certificationbody as well as the rules for the use of the bio-based content label and logo.
3.2 CERTIFICATION AND LABELS
Sustainability certifications and labels can help public
procurers to define their requirements regarding bio-based
products in their public tenders. Under the new EU Public
Procurement Directives (2014)8 contracting authorities have
the possibility of using labels as a source of information for
defining technical specifications, to check compliance with
the technical specifications/ requirements or in assessing
award criteria. In checking compliance the requirements set
in a tendering process, by accepting a label as one means of
proof of compliance with the technical specifications can help
a procurer save time while ensuring that high environmental
standards have been applied in the procurement process.
Important labels
A non-exhaustive list of different labels, certification schemes9
and standards that may be considered when purchasing bio-
based products or services is provided below.
24 InnProBio – Forum for Bio-Based Innovation in Public Procurement
nordic ecolabel (“Nordic Swan”)
Sanitary products: Diapers and incontinence products must have ≥ 50 weight -% of renewable material in
the product and additional component. Other products must have ≥ 60 weight-% of renewable material in
the product and additional component. Or the primary packaging contains ≥ 20 weight-% of renewable and/
or recycled material in relation to the total weight of the primary packaging. The amount of renewable/recycled material can be
documented on an annual basis. Or ≥ 7 weight-% of the polymers in relation to the total weight of polymers in the product and
additional component (including SAP) must be bio-based and/or recycled.11
disposables for food: At least 90% by weight of the disposable article must be bio-based or made from recycled plastic. The
recycled plastic must fulfill Regulation (EC) No 282/2008 on recycled plastic materials and articles intended to come into contact
with foods. The recycling process must be approved and published on EU's official list over approved recycling processes, see
article 9 in the regulation 282/2008. A maximum of 10% by weight of the disposable article may comprise non-renewable materials.
Coatings and adhesives are to be included in the material composition calculation. Other chemicals, such as printing inks and
additives, should not be included. Metal and recycled pulp/paper/paperboard/cardboard are not permitted. Individual packaging,
cores and other parts as described in O1 must be included in the material composition.12
Blue Angel (“Der Blaue Engel”)
office materials (writing utensils and stamps): The 2016 revision of the criteria for these products has
included the provision that they need to be produced either from 60% renewable raw materials or from 80%
recycled materials.13
eu ecolabel (“the Flower”)
lubricants: Lubricants receiving the EU Ecolabel need to prove a minimum content of bio-based carbon
between >45% and >70% (depending on the type of lubricant).10
NO
RDIC
SWAN ECOLABE
L
10 The European Ecolabel for Lubricants “The official EU mark for Greener Products”: http://ec.europa.eu/environment/ecolabel/documents/lubricants.pdf 11 Nordic ecolabel sanitary products: http://www.nordic-ecolabel.org/criteria/product-groups/?p=112 Nordic ecolabel disposables for food: http://www.nordic-ecolabel.org/criteria/product-groups/?p=213 Blue Angel: https://www.blauer-engel.de/en/products/home-living/schreibgeraete-stempel
Multi-issue ecolabels specifying bio-based products
In Europe three multi-issue ecolabels exist of ISO 14024 type I. The EU Ecolabel, the Nordic Ecolabel, and the Blue Angel
ecolabel. Specific product categories that include bio-based products under these labels are lubricants, sanitary products, food
disposables, and office materials. ISO differentiates between Type I, II and III ecolabels, of which Type I are the strongest
ones. More information on the ecolabel types can be found in InnProBio’s Decision Support Tool, accessible at http://dst.
biobasedconsultancy.com/certification-and-eco-labels. The EU Ecolabel, the Nordic Ecolabel, and the Blue Angel ecolabel are
all voluntary, multiple-criteria based, third-party ecolabel programmes awarding licenses authorising the use of environmental
labels on products. These indicate overall environmental preferability of a product within a particular product category based on
life cycle considerations. Examples of the requirements that apply to bio-based products such as lubricants, sanitary products,
food disposables, and office materials are given below.
25Handbook on the public procurement of bio-based products and services
Private, third party certifications for different aspects (single issue labels)
Certification refers to the conformity of an object, person
or organisation to a certain standard or requirements. With
certification, organisations and/or persons can demonstrate
their conformity and use the label that shows the claim.
For example, procurers can apply standards in the field of
bio-based products, to specify the required characteristics of
bio-based products. Suppliers can use certificates and labels
to demonstrate that they comply with these requirements. In
this respect, procurers can also require that the claim of bio-
based content is assessed by a third party (i.e. certification
body). Third-party certification involves an independent
assessment declaring that specified requirements pertaining
to a product, person, process, or management system have
been met.
The cultivation of renewable resources (usually from forestry
and agriculture, sometimes from marine aquaculture)
has a huge impact on the sustainability of the final bio-
based products. Due to the EU’s renewable energy policy,
several certifiers have developed certification schemes for
agricultural biomass that adhere to the conditions laid down
in the EU’s 2009 Renewable Energy Directive (RED). Some of
them have by now adapted their schemes in a way that they
can be applicable also to materials, not only to energy. For
wood, sustainability certification schemes were developed
before the renewable energy policy due was put into place to
address concerns about unsustainable forestry practices in
many parts of the world.
WorldWide Fund for Nature (WWF) assessed the different
certification systems, comparing strictness, etc. The
assessment is available in its 2013 report “Searching for
sustainability. Comparative analysis of certification schemes
for biomass used for the production of biofuels”.14 Since
then, the certification systems have developed. At the time
of the 2013 assessment, RSB was rated the best certification
system for all kinds of biomass and RSPO and RTRS were
the highest rated for single biomass types (soy and palm oil
respectively) with Bonsucro following closely behind.
Certifications for wood
• Forest Stewardship Council (FSC)
• Programme for the Endorsement of Forest Certification
(PEFC)
Certification for agricultural biomass
• International System for Carbon Certification (ISCC) – all
biomass
• Roundtable on Sustainable biomaterials (RSB) – all
biomass
• REDcert – all agricultural biomass
• Better Biomass – all biomass
• Roundtable on Sustainable Palm Oil (RSPO) – only palm oil
• Bonsucro – only sugar
• Roundtable Responsible Soy (RTRS) – only soy
Bio-based content
Bio-based content is a certification scheme based on the
European Standard EN 16785-1 “Bio-based products – Bio-
based content – Part 1: Determination of the bio-based
content using the radiocarbon analysis and elemental
analysis”. Organizations can use the bio-based content
certification scheme to demonstrate the (minimum share
of) bio-based content in their products and label them with
this claim. This certification scheme has been developed
and validated by a broadly composed group of European
stakeholders (e.g. companies active in biopolymers, bio-
based chemicals, bio-based plastics, natural rubbers, paints/
coatings, certification bodies, procurers).
The European certification scheme contains provisions
for the determination, verification and monitoring of the
bio-based content of products or product families and is
applicable to all kinds of products containing carbon.
14 WWF report “Searching for sustainability. Comparative analysis of certification schemes for biomass used for the production of biofuels” (2013): http://awsassets.panda.org/downloads/wwf_searching_for_sustainability_2013_2.pdf
26 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Another existing certification scheme for bio-based content
that refers to bio-based carbon content, is based on the
American standard ASTM 6866 “Standard Test Methods
for Determining the Bio-based Content of Solid, Liquid, and
Gaseous Samples Using Radiocarbon Analysis”, but also
refers to CEN TS 16137 “Plastics – Determination of bio-
based carbon content”.
European Certification Schemes
The following are certification schemes used in Europe to
prove the bio-based content:
• Biobased content (owned by NEN and awarded by
Vinçotte or DIN CERTCO)
• OK biobased (owned and awarded by Vinçotte)
• DIN-Geprüft Biobased (owned and awarded by DIN
CERTCO)
End-of-life options
There is a number of certifications and labels that highlight
the special end-of-life options of bio-based products such as
compostability, biodegradability in soil and biodegradability
in sea water. (For clarification on these terms, please refer to
the InnProBio Factsheet #3 on Biodegradability which can
be accessed at http://innprobio.innovation-procurement.
org/bio-based-products-services/factsheets/.) The following
are the most widely used certifications used in Europe to
prove compliance with the compostability norm EN 13432:
Industrial compostability
• The Seedling (owned by European bioplastics, awarded
by DIN CERTCO and Vinçotte)
• DIN-Geprüft Industrial Compostable (owned and
awarded by DIN CERTCO)
• OK compostable (owned and awarded by Vinçotte)
Home compostability
• OK home compostable (owned and awarded by Vinçotte)
• DIN-Geprüft Home Compostable (owned and awarded
by DIN CERTCO)
Biodegradability in soil
• OK biodegradable soil (owned and awarded by Vinçotte)
• DIN-Geprüft biodegradable soil (owned and awarded by
DIN CERTCO)
Biodegradability in sea water
• OK biodegradable marine (owned and awarded by
Vinçotte)
27Handbook on the public procurement of bio-based products and services
3.3 FREQUENTLY ASKED QUESTIONS
This list of Frequently Asked Questions (FAQs) is intended
to give an overview on the most pressing questions a public
procurer, a decision maker or even a provider of BBPS may
have regarding the public procurement of bio-based products
and services. With these questions and their answers, the
InnProBio consortium aims at taking away the fear of the
unknown of procuring innovative, environmentally friendly
and sustainable products.
Q1: What are bio-based products and services?
Bio-based products are made – completely or partially –
from biogenic material, which means they are made from
renewable resources (also called “biomass”). The most
frequently used types of biomass are sugar, starch, plant oils,
wood and natural fibres. Partially bio-based products may
also contain non-bio-based materials.
Today, a wide range of products exists that are used daily in
households, which are at least partly made from renewable
resources, even though most consumers are not aware that
these products are bio-based. This is for example often the
case with construction materials, packaging, detergents,
cosmetics and textiles. One of the most common types of
bio-based products is paper, although bio-based products
can also include pens, inks, furniture, and gardening tools,
amongst others.
A bio-based service would comprise of the hiring of a service
that uses bio-based products. This could be a contractor
or a cleaning service that uses bio-based paints or cleaning
products, for example.
Q2: Why are we specifically targeting "innovative" bio-based products and services?
Until the mid of the 19th century we had an agricultural
society. Since then we have been introducing new products
from fossil sources, like oil, coal and natural gas. For several
reasons we need to move to a new agricultural society: the
bio-based economy. But we need to do this much smarter,
without exhausting the earth and aim at closing cycles.
We need to extract valuable components from biological
raw materials, without consequences for the food supply.
Agricultural by-products from e.g. sugar beet, potatoes
and grass become new sources to make valuable bio-based
materials.
These new, innovative materials will undergo rigorous testing
and have to adhere to the same quality and safety regulations
as any other product in Europe. But they don’t have a track
record of 50-100 years yet, like oil-based alternatives.
Factsheet #1:“What are bio-based products?”
For more information on what bio-based products are, what they are made from, etc., please refer to the InnProBio Factsheet #1 “What are bio-based products?” which can be accessed at:http://innprobio.innovation-procurement.org/bio-based-products-services/factsheets/
28 InnProBio – Forum for Bio-Based Innovation in Public Procurement
They don’t have the economies of scale in their production
process yet and they often may require conformance testing.
On the other hand they may have added value you didn’t
know about.
So when innovative bio-based products and services may
be interesting to procure, be aware that you need to create
room in the procurement process and tender documents,
since these products may cost more initially and may need
some time to prove themselves, but may also be better
for your health and for the environment. Procurement
of innovation can be a suitable approach to create such
room. A good contact with the market is recommended to
understand what is available, how these new products can
fulfil your needs and how to organise your tender to give
these alternatives a chance.
The difference between a regular procurement process and
a Public Procurement of Innovation procedure lies mainly in
the formulation of the requirement and the way you interact
with the market. The term public procurement of innovation
is used for ‘procurement where contracting authorities act
as a launching customer of innovative goods or services
which are not yet available on a large-scale commercial basis,
and may include conformance testing’.15
Q3: Why should I promote or prefer bio-based products through public procurement?
If sustainably produced, by choosing bio-based products
over conventional alternatives, you can make several positive
contributions to your office, your hospital, your community
and to our society and environment as a whole.
By buying these products, you can promote innovative
solutions and increase their market uptake. Many of these
innovative products are not well known – by giving them
visibility, your decision can have a positive impact on overall
market developments towards more efficient and more
sustainable products.
There are many bio-based alternatives that can be relevant
for your procurement needs (for more details, see Question
#4 below). There is sufficient market availability and their
functionalities are the same or even better than conventional
products. Why not give them a chance?
If our society wants to take climate change seriously, we need
to reduce the amount of fossil carbon used and the amount
of fossil CO2 released into the atmosphere. A study from
2015 (McGlade & Ekins)16 has shown that we need to leave
substantial amounts of fossil resources in the ground if we
want to achieve the 2°C climate goal. Sustainably produced
bio-based products can contribute to achieving this goal!
Here are some more benefits that bio-based products can
offer you and your community:
• Reduced negative health effects caused by airborne
petrochemical toner particles;
• The application of natural fibres offers better thermal
insulation. Their application e.g. in building construction
materials can also help to reduce health problems during
installation;
• Better environmental performance, including a lower CO2
footprint during production and/or use. For example,
bio-based car parts are lighter than conventional parts,
resulting in lower fuel consumption during car use;
• Biodegradability in environments where collection and
separation of certain waste products for recycling is
not viable or practical. This is particularly relevant in
catering and outdoor events, along with gardening and
landscaping. Biodegradability is also a characteristic of
biosurfactants (used in detergents);
• Lower consumption of detergents, energy, water, etc. and
lower tear in the case of bio-based clothes and textiles
like Lyocell or Tencel®, resulting in improved longevity
and reduced maintenance costs;
• Reduced total costs of ownership (TCO) i.e. potential
lower total costs when considering all costs associated
with a product over its lifetime.
15 Art.2(18), Horizon 2020 Rules for Participation Regulation No 1290/2013.16 McGlade & Ekins (2015), The geographical distribution of fossil fuels unused when limiting global warming to 2°C
29Handbook on the public procurement of bio-based products and services
Yes. InnProBio has identified a number of important
procurement categories in which bio-based products can
provide a good alternative to conventionally produced
products. The identified categories and corresponding bio-
based products are:
• Construction and infrastructure: construction structure
materials such as insulation, sheet, façade panels and
other temporary construction materials (pipes and
plastics) and (indoor) coatings;
• Gardening and landscaping: geotextiles, erosion mats,
shielding, plastic binders, plant containers and tree
anchoring;
• Nursery and medical equipment: textiles;
• Cleaning, hygiene and sanitary: cleaning detergents,
cleaning of company clothing, domestic services,
household waste management;
• Vehicles and mobility: company cars, lubricants;
• ICT, offices supplies and paper: office supplies and toner
cartridges;
• Furniture and indoor interiors: office upholstery,
especially carpeting, furniture;
• Food, catering and events: disposable cups, packaging
materials and utensils.
For more detailed information about bio-based products
that are relevant for public procurement, please see the good
practice case studies, the tender text blocks, and the database
of bio-based products on the DST which can be accessed at
https://www.biobasedconsultancy.com/en/database.
We have also identified a sufficient number of suppliers of
bio-based products to ensure you that including the bio-
based criterion in the tender does not create any restriction
on the market.
Q4: Are there any bio-based products on the market that have any relevance to my procurement needs? Is there sufficient availability of bio-based alternatives?
30 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Q5: Do bio-based products provide any benefits to society as a whole?
Bio-based products cover a wide variety of applications
and are made from a multitude of different raw materials.
Therefore, the benefits provided by them need to be
assessed on a case by case basis and can vary, depending
on the application and the intended use.
However, it is possible to make some general statements
about bio-based products and why promoting them can
be good for society as a whole. If we change our industry
from being petroleum-based towards using more bio-based
feedstocks, we reduce Europe’s dependency on fossil fuels
imports, making us less vulnerable to abrupt changes
on the world market or possible conflicts. By using more
domestic biomass for more applications, we create outlets
for farmers, thus increasing their income and improving
rural development with more added value and jobs. Thinking
more long-term, our society will need to find alternative ways
to produce its many consumables and materials, since the
supply of petroleum is ultimately finite. What’s more, we need
to leave substantial amounts of fossil resources in the ground
if we want to achieve the 2°C climate goal, see above (Q.3)
Bio-based products can make significant contributions to
mitigating climate change. The specifics of each product’s
impacts can vary, and not all bio-based products perform
better in environmental terms, but there is strong evidence
which suggests that many products can have a reduced
impact on the environment, if biomass is produced
sustainably and production processes are environmentally
efficient. For more details, see below (Q.7) or the InnProBio
Factsheet #2 on “Sustainability of bio-based products”.
Some examples of benefits provided by bio-based products are:
• Saving up to 30% of the electricity used in laundry
by getting clothes cleaned at 30°C using bio-based
surfactants and enzymes;
• Agricultural mulch films that are biodegradable in soil
improve agricultural productivity and reduce costs of
collecting plastic waste from the field, while at the same
time avoiding the uptake of plastic particles in soils;
• Bio-based lubricants are biodegradable in soil and water
and can be used in environmentally sensitive areas;
• Natural cosmetics like rinse-off cosmetics (toilet soaps,
shower preparations, shampoos) are biodegradable in
water.
Factsheet #2:“Sustainability of bio-based products”
For more information on the sustainability of bio-based products, please refer to the InnProBio Factsheet #2 “Sustainability of bio-based products” which can be accessed at:http://innprobio.innovation-procurement.org/bio-based-products-services/factsheets/
31Handbook on the public procurement of bio-based products and services
Q6: What are the benefits of bio-based products for users/consumers compared to traditional products?
Bio-based products cover a wide variety of applications
and are made from a multitude of different raw materials.
Therefore, the benefits provided by them need to be assessed
case by case and can vary, depending on the application and
the intended use. Specific examples can be found in the
good practice case studies which can be accessed at http://
innprobio.innovation-procurement.org/tools-resources/good-
practices/.
In many cases, bio-based alternatives can offer added
functionalities that offer direct or indirect benefits for
consumers compared to conventional products. Some
examples would be textiles made from natural fibres,
especially novel cellulosic fibres, which offer great wearing
comfort, or detergents and cosmetics that are skin friendlier
and are made with fewer chemicals. Novel bio-based
surfactants show improved functionalities in removing dirt
and building materials or geotextiles from natural fibres or
wood show superior properties in insulating or stabilizing.
As mentioned before, all of that needs to be assessed based
on the formulation of a specific product and its intended use.
Q7: Are bio-based products always more sustainable than petroleum-based products?
In certain cases yes, but not always.
Their benefits must be assessed on a case-by-case basis
and can vary greatly depending on the application and the
intended use. Products made from petroleum will at the end
of their lifetimes add fossil carbon to the atmosphere, thus
contributing to the greenhouse effect and climate change.
Bio-based products only add the carbon to the atmosphere
which the plants took from the atmosphere before, therefore
keeping a balance. However, cultivation of biomass can also
have strong impacts on the environment.
Life Cycle Assessment (LCA) is one tool to assess
the environmental impacts of one product. LCAs are
standardised and can help to decide whether a product is
really better or not. Another tool is a sustainability certification
scheme, ensuring that agricultural practices are in line with
basic sustainability requirements. This means, for example,
not burning rain forest for agricultural land or endangering
biodiversity. For more information on LCA and sustainability
certifications, please check InnProBio Factsheet #2 on the
sustainability of bio-based products.
Q8: How are bio-based products and services linked to the circular economy?
There is no general answer to that question. The circular
economy aims at keeping resources in a use circle as long
as possible, thus contributing to more resource efficiency.
The bioeconomy is defined through its feedstock base
(which is biomass) and through the processes used for
the production of goods, if they use biological organisms
or parts thereof (“biotechnology”), thus aiming to shifting
the economy’s resource base away from fossil and therefore
finite feedstocks. Thus, there is no general connection
between the two.
It is sometimes said that the bioeconomy is part of the
circular economy, but this is also misleading. There are some
overlaps between the two, and both can contribute to each
other’s goals, but to sort one under the other is not correct.
Here are some examples how bio-based products contribute
to the concept and goals of the circular economy:
32 InnProBio – Forum for Bio-Based Innovation in Public Procurement
• Many bio-based products can go to organic recycling,
that is composting or biodegradation, after use (please
see InnProBio Factsheet #3 on Biodegradability for more
details), which will return the biomass to the soil and can
let grow new feedstocks. Many bio-based products are
made from side-streams of other production processes,
thus increasing the resource efficiency. This is true both for
traditional bio-based sectors, such as the pine chemicals
industry using tall oil as a by-product of wood pulp
production, or for the oleochemicals sector which makes
for example paints and coating from animal processing
by-products. It is also true for newer biorefinery concepts
that aim to utilise all biomass fractions;
• Many bio-based products are recyclable. Paper and wood
products are excellent examples where well-functioning
recycling systems of bio-based products are in place.
Certain bio-based plastics are recyclable as well, but not
for all of them there are recycling facilities. However,
research has shown very clearly that bio-based plastics
do not hinder the recycling streams more than any other
material for which there is no recycling facility. Note
that in Europe, only the four big bulk plastic streams
polyethylene, polyethylene terephthalate (used in PET
bottles), polystyrene (PS) and PVC (Polyvinyl chloride)
are being recycled. No other conventional plastic gets
recycled, either, so this is not specific to bio-based
plastics;
• Many bio-based products can go to organic recycling,
that is composting or biodegradation, which will return
the biomass to the soil and can let grow new feedstocks.
Q9: How can the bio-based content of a product be measured? Is there a standard and are there certificates to ensure the claims?
The European standardisation committee CEN/TC 411 bio-
based products has developed several standards that define
bio-based products and how to measure their bio-based
content.
• The standard EN 16575 “Bio-based products –
Vocabulary” (2014) defines what bio-based products are,
what biomass is, etc.
• The European Standard “Bio-based products – Bio-based
carbon content - Determination of the bio-based carbon
content of products using the radiocarbon method”
(EN 16640:2017) outlines how to measure the bio-based
carbon content, which is possible because carbon from
biomass can be differentiated from carbon stemming
from petrol, due to the structure of the molecules.
• The European Standard “Bio-based products - Bio-based
content - Part 1: Determination of the bio-based content
using the radiocarbon analysis and elemental analysis“
(EN 16785-1:2015)
To verify the claims of being bio-based, different certifications
exist on the European market: the Belgian Vinçotte and two
certification schemes; OK bio-based (based on ASTM 6866)
and Bio-based content (this last certification scheme is
based on the European Standard EN 16785-117, and one from
the German certifier DIN CERTCO (“DIN-geprüft”, based
on multiple standards)18. These certifiers measure the bio-
based carbon content of a product and express the results
Factsheet #3:“Biodegradability: exposing some of the myths and facts”
For more information on the biodegradability of bio-based products, please refer to the InnProBio Factsheet #3 “Biodegradability: Exposing some of the myths and facts” which can be accessed at:http://innprobio.innovation-procurement.org/bio-based-products-services/factsheets/
33Handbook on the public procurement of bio-based products and services
in ranges of percentages (e.g. bio-based carbon content is
between 50% and 70% of the total carbon content of the
product). For more information on the certification schemes,
please see InnProBio Factsheet #2 on Sustainability of bio-
based products.
Q10: Is it okay to use food crops for materials or bio-based products?
Yes, it is, under some conditions. Here is why:
Using food crops for anything else than food and feed is a
very controversial topic. During the 2007-2008 world food
price crisis it was often stated that biofuels contributed
to the political and economic instability and social unrest
by creating competition to food and increasing prices.
Therefore, it has become more or less consensus that using
food crops for anything else than food and feed is not okay,
and the focus has shifted more towards feedstocks from
the so-called “second generation” which are supposedly
not in any competition to food, which is mostly waste and
lignocellulosic materials (that is wood and short rotation
coppice such as miscanthus or poplar).
However, in reality, this is more complicated. There is
increasing evidence that growing food crops, also for other
outlets other than food and feed, offer several advantages.
They increase the overall availability of food, offer a
diversified income to farmers, are more land efficient than
short rotation coppice and so on.
By now, several studies have convincingly shown that
biofuels were not the main driver of the exorbitant food
prices in 2008. Since bio-based materials have much lower
market shares and feedstock needs than fuels and energy,
their impacts is even lower than that.
Therefore, using food crops such as sugar or starch for bio-
based materials are acceptable, if overall sustainability is
ensured (e.g. through a certificate).
Q11: Are there any drawbacks and/or barriers to purchasing bio-based products and services?
In general, bio-based products that are on the market
have undergone rigorous testing and have to adhere to the
same quality and safety regulations as any other product
in Europe. So in these terms, there should be no barrier to
buying bio-based products. If you are unsure and would like
to receive more information, please follow InnProBio and
the market dialogues and trainings we will provide. From
a public perspective, there might be questions related to
sustainability or the competition to food, which we tried to
address in the questions above. Using certificates and labels
is a great possibility to show that the product chosen has
positive impacts.
Of course, price is another very important factor. Often,
bio-based products are more expensive than conventional
products which are comparable in function. This is because
production costs are higher, which is due to the relatively
new developed processes, higher feedstock costs and
small volumes being produced. However, the impact on
the procurement is often lower than perceived, since the
increased longevity or reduced needs for maintenance can
significantly lower the total cost of ownership, and also
because often only small volumes of bio-based products are
procured.
17 Differences between OK Bioased and Biobased content certification are well explained at Vinçotte website: http://www.okcompost.be/data/pdf-document/Doc%2036e-a%20-%20FAQ%20-%20OK%20biobased%20vs%20NEN%20bio-based%20content.pdf
18 DIN-Geprüft: http://www.dincertco.de/en/dincertco/produkte_leistungen/zertifizierung_produkte/umwelt_1/biobasierte_produkte/biobasierte_produkte_mehr_nachhaltigkeit.html
34 InnProBio – Forum for Bio-Based Innovation in Public Procurement
3.4 TEXT BLOCKS FOR TENDERS
The drawing of technical specifications for the public
procurement of bio–based products and services is necessary
to determine the subject-matter of the contract and to allow
contracting authorities to award the contract. Contracting
authorities must set out the technical specifications in the
contract documents, such as contract notices, contract
documents or any additional documents. Technical
specifications must afford equal access for tenderers and
not have the effect of creating unjustified obstacles to the
opening up of public procurement to competition.
For the declaration of the needs and formulation of the
technical specifications it is of importance to specify the
environmental criteria which the administration (the public
procurer) is aiming for in its climate and resource protection
targets. The text blocks are separated as per the product
categories identified by InnProBio as the most likely product
groups for bio-based procurement in Europe.
An informative selection of text for inclusion in the public
procurement documents, such as contract notices, contract
documents or any additional documents for the procurement
of bio–based products and services is presented here. The
text blocks are grouped per product category and can be
found and copied from below.
Technical specifications in the selection and qualification
process of public procurement must be formulated in the
following manners:
a. By reference to technical standards which are relevant
to the subject matter of the contract and, in order of
preference, to national standards transposing European
standards, European technical approvals, common
technical specifications, international standards, other
technical reference systems established by the European
standardization bodies, or when the above technical
specifications do not exist, by reference to national
standards, national technical approvals or national
technical specifications relating to the design, calculation
and execution of the works and use of the products. Each
reference to technical standards must be accompanied
by the words ‘or equivalent’;
b. By reference to performance or functional requirements
which may include environmental characteristics.
Where contracting authorities lay down environmental
characteristics in terms of performance or functional
requirements they may use the detailed specifications,
or, if necessary, parts thereof, as defined by European
or (multi-) national eco-labels, or by and any other eco-
label, provided that those specifications are appropriate
to define the characteristics of the supplies or services
that are the object of the contract, that the requirements
for the label are drawn up on the basis of scientific
information, that the eco-labels are adopted using a
procedure in which all stakeholders, such as government
bodies, consumers, manufacturers, distributors and
environmental organisations can participate, and finally
they are accessible to all interested parties.
c. By reference to test reports from a conformity assessment
body that performs conformity assessment activities
including calibration, testing, certification and inspection
accredited in accordance with Regulation (EC) No
765/2008 as means of proof of specification compliance.
d. By reference to certification by public or private law
certification bodies as means of proof of specification
compliance.
35Handbook on the public procurement of bio-based products and services
Building materials including wood products
The wood to be used comes from certified and/or self-assessed sustainable forestry/silviculture.
The proportion of renewable materials or the bio-based content of the end product is at least 85%.
At least 50 % of the wood to be used consists demonstrably of secondary raw materials such as wood from industrial waste or
other waste wood.
Insulation materials
In bio-based fibre insulating materials e.g. hemp, flax, wool, cork, coconut, in the form of sheets, felts, mats or bulk and blow-in
goods) mandatory minimum requirement of bio-based content is 85 %.
Proof of origin of bio-based raw material required.
Bulk- or blow-in materials from wood chips and shavings: mandatory minimum requirement is at least 50 % of the used wood
consisting demonstrably of secondary raw materials such as industrial residue wood or waste wood.
Wall colours
Mandatory minimum requirement of bio-based content is 80 %.
Proof of origin of all bio-based resources is required to obtain information about potential pesticide exposure.
Full declaration of ingredient content.
Advanced requirement/bonus points for resource cultivation: At the cultivation of the bio-based resources no synthetic pesticides
with prohibited substances may be used.
Glues based on non-bio-based resources are permitted to be used as binders provided they comprise a maximum of 10 % of the
volume within the final range of products.
Construction and infrastructure products:
For example:
Construction structure materials such as insulation, sheet,
façade panels and other temporary construction materials
(pipes and plastics) and (indoor) coatings
36 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Gardening and landscaping:
For example:
Geotextiles, erosion mats, shielding, plastic binders, plant containers and tree anchoring
Plastic products for landscaping
For bio-based plastics, the carbon content as defined by reference to EN 16575, must be at least 40%, between 40 % and 60 %,
between 60 % and 80 % or about 80 % of the final product (EN 16640, ASTM D6866 or equivalent).
The product must demonstrate biodegradability properties in line with EN 14987 and/or compostability in line with EN 14995,
ISO 17088 or equivalent).
Cleaning, hygiene and sanitary:
For example:
Cleaning detergents, cleaning of company clothing, domestic services, household waste management
Sanitary paper
The fibre raw material originates exclusively from recycled paper.
Hazardous chemical substances are excluded.
Vehicles and mobility:
For example:
Company cars, lubricants
Lubricants and oils
The product is made from at least 80 % renewable materials or its bio-based content is at least 80%.
The additives used to improve the technical properties contain no eco-toxical critical substances, in line with EN 16807.
The product has no adverse effects on the environment and on the ground during use.
The product has good biodegradability, in line with EN 16807 or equivalent.
37Handbook on the public procurement of bio-based products and services
ICT, office supplies and paper:
For example:
Office supplies and toner cartridges
Printing and copying paper
Content requirement of at least 70 % of total primary pulp must originate from sustainably managed forests.
The additives used to improve the technical properties contain no eco-toxical critical substances, in line with EN 16807.
Guarantee of origin of primary fibres used must be from recycled paper.
Content requirement of 100 % from recycled paper for writing paper for offices, computer paper "continuous paper" for impact
printers, copy paper and paper for laser printers.
Paper products including envelopes
The pulp is made of 100 % recycled paper.
The pulp must have particularly low emissions and aging
Furniture and indoor interiors:
For example:
Office upholstery, especially carpeting, furniture
Wall colours
Mandatory minimum proportion of bio-based content must be 80 %.
Proof of origin of all bio-based resources is required to obtain information about potential pesticide exposure.
Product must have full declaration of ingredient content.
Advanced requirement/bonus points for resource cultivation: At the cultivation of the bio-based resources no synthetic pesticides
with prohibited substances may be used.
Glues based on bio-based resources are permitted to be used as binders provided they comprise of 10 % of the volume within the
final range of products.
38 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Textile floor coverings
Mandatory minimum content of bio-based resources must be 95 %.
For the main components, proof of the origin of their resources is required.
Advanced requirement /bonus points:
The product must contain no plasticisers, formaldehyde and other volatile organic compounds.
The product must guarantee renunciation of the use of synthetic pesticides for resource production and provide for appropriate
reviews of the production areas.
The product must guarantee that cotton harvest is carried out without chemical defoliation.
The product must originate from irrigation of cotton fields without impairment of the local ecosystem.
Resilient floor coverings
Obligatory minimum amount of bio-based resources must be at 98 %.
Sustainable feedstock production and limits for pesticides and heavy metals must be adhered to in the production process.
Advanced requirement /bonus points:
The product must originate form sources where recultivation of cultivation areas is ensured.
Wooden floor coverings
The product must have at least 70 % minimum content requirement of solid wood which must demonstrably originate from
sustainable forestry.
The product is required to have at least 40 % of wood material consisting of recycled materials.
The product must ensure exclusion of critical pollutants from its production, especially in coatings.
Office and upholstered furniture
Products must consist more than 50 % in volume of renewable resources wood, e.g. solid wood, saw dust and / or other wood
materials (chip boards, core-boards, fibreboards etc., treated or untreated).
Surface coatings such as oils and glazes must originate from bio-based products.
There must be a mandatory minimum proportion of 50 % in renewable raw materials or recycled materials in all non-metal parts
used.
39Handbook on the public procurement of bio-based products and services
Upholstered furniture
No synthetic fillers must be used in the final product.
The product is required to have at least 40 % of wood material consisting of recycled materials.
No bio-based fabric should be mixed with materials in a product.
Textiles
The product must contain organically produced cotton or other natural fibres
Bidders must indicate the proportion of cotton or other natural fibres used in the textiles by weight deriving from organic
production. To be considered as such, the fibre must be produced according to Regulation (EC) No 834/2007.
Verification:
The supplier must provide evidence of the origin of the fibres used and the organic nature of their production, such as the EU
organic logo or approved national logos for organic production.
Wood furniture
Mandatory minimum proportion of 90 % of total weight in solid wood or wood material.
The wood used must originate from sustainable forests and demonstrably legal sources.
Wood and wood-based materials
All wood and wood-based materials shall originate from legally sourced timber.
Verification:
Certificates of chain of custody for the wood certified as FSC, PEFC or any other equivalent means of proof will be accepted as
proof of compliance.
The legal origin of wood can also be demonstrated with a tracing system being in place. These voluntary systems may be certified
by third party, often as part of ISO 9000 and/or ISO 14000 or EMAS management system. If wood stems from a country that
has signed a Voluntary Partnership Agreement (VPA) with the EU, the FLEGT licence may serve as proof of legality. For the non-
certified wood bidders shall indicate the types (species), quantities and origins of the wood used in production, together with a
declaration of their legality. As such the wood shall be able to be traced throughout the whole production chain from the forest to
the product. In specific cases, where the evidence provided is not considered sufficient to prove compliance with the requested
technical specifications, contracting authorities may ask suppliers for further clarifications of proof.
40 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Packaging materials
Packaging must consist of readily recycled material, and/or materials originating from renewable resources, or be a multi-use
system.
All packaging materials must be easily separable by hand into recyclable parts consisting of one material (e.g. cardboard, paper,
plastic, textile).
Verification:
A description of the product packaging must be provided together with a corresponding declaration of compliance with the
recycle criteria.
Food, catering and events:
For example:
Disposable cups, packaging materials and utensils
Plastic products for catering
For bio-based plastics, the carbon content as defined by reference to EN 16575, must be at least 40%, between 40 % and 60 %,
between 60 % and 80 % or about 80 % of the final product (EN 16640, ASTM D6866 or equivalent).
The product must demonstrate good biodegradability / compostability.
41Handbook on the public procurement of bio-based products and services
3.5 GOOD PRACTICE EXAMPLES
A set of four good practice cases are available on the InnProBio website, to be accessed at http://innprobio.innovation-procurement.
org/tools-resources/good-practice/. The good practice cases illustrate existing experience with the public procurement of
innovation of bio-based products and services. These examples can serve as inspiration for the procurement of further bio-
based products and services. Short versions of the good practice cases are described below, the full texts are available online.
Purchasing hot drinks in cups made from bio-based materials
The procurement in this good practice case was planned and carried out in cooperation
with the Department for category management for vending machines, operating under the
Ministry for Infrastructure and Environment (Rijkswaterstraat -RWS) in the Netherlands.
The procurement objective was the purchase of hot drink vending machines, serving
an office building with approximately 2400 workplaces. Through the procurement, the
national government sought to test how it could stimulate innovation in the bio-based
product sector by requiring that the cups purchased be made of bio-based materials.
RWS selected the most economically advantageous tender (MEAT) using a combination of price and quality to determine which
tender offered the best value for money. Price and quality were split to price being 60 % of the total score and quality being 40 %
of the total score. The quality criterion was split into the following sub-criteria: 1) Quality management system: 40 %, 2) Handling
failures, monitoring counters and invoicing process: 40 %, 3) Bio-based cups and innovation: 20 %.
The aim of the tender was to create space for innovation. The tenders received met expectations in terms of innovation, as the
final product purchased was one which was not available on the mainstream market. The coating material of the procured bio-
based cup was high-quality corn whereas the paper material was made from sugar cane. The bio-based cup was biodegradable
and compostable according to the EN 13432 standard.
Road construction using bio-based materials
The Dutch Province of Zeeland is one of the frontrunners in Europe applying bio-based public procurement with a view to
stimulate the transition to a circular economy. In 2016 Zeeland adopted an Action Plan for Sustainable Procurement (2017 –
2020) in which it formalised its intention to use public procurement to create social value and to encourage more sustainable
procurement actions (in general), including also bio-based procurement.
This procurement sought to commission a works contract to widen the N62 road
'Tractaatweg' (100 km/h) in Zeeuws-Vlaanderen from one to two lanes in each direction,
and to build four new viaducts. The N62 is a major road connecting the seaports and the
industrial areas of Ghent (in Belgium) with Terneuzen and Vlissingen (in the Netherlands).
The procedure was carried out using a Competitive Dialogue approach. The works
contract was assigned in February 2017, and preparatory work took place between March
and August 2017. Commissioning is scheduled for early 2019.
42 InnProBio – Forum for Bio-Based Innovation in Public Procurement
Disposable bio-based aprons for Skåne’s healthcare sector
Following an analysis carried out in 2011 of the region of Skåne's impacts on climate
change emissions, the regional council discovered that 40% of the Skåne's CO2 emissions
were generated through its healthcare sector. A large part of this impact was caused by
single-use (or disposable) products, such as protective aprons. In 2014, Skåne's healthcare
sector was responsible for using and disposing of 5.2 million single-use aprons, generating
the equivalent of 300 tonnes of CO2 emissions. The climate impact caused by these kinds
of products can be reduced by limiting unnecessary consumption, finding new materials
offering better performance and lower weight, as well as replacing fossil-based materials
with fossil-free alternatives through, for example, innovation procurement.
As a climate-neutral disposable protective apron was not available on the market at that time, the Region of Skåne embarked on
an innovation-oriented public procurement process to purchase aprons mostly made from renewable (bio-based) material. The
process began in 2014 and concluded in May 2016 with the contract awarded to a company for the supply of disposable aprons
consisting of 91% renewable material. The purchase/use of the bio-based aprons is expected to result in savings of 250 tonnes
per year of CO2 emissions.
For the Region of Skåne, the procurement exercise meant not only that it was possible to stimulate innovation, which led
to the development of a more climate-neutral product, but that it was also possible to create a model for how a PPI can be
implemented, with lessons - and newly developed materials - that can be implemented in future processes.
Purchase of bio-based cleaning services by the Wilanów District of the City of Warsaw (Poland)
The Wilanów District Office – one of 18 Districts of the City of Warsaw - carried out a
procurement of environmentally-friendly cleaning and maintenance services for some of
the city’s water supply and treatment plants. The procurement was launched in November
2014 for services related to the local water extracting plant, extracting underground
water through pumps, and for the local water treatment station. The Call for Tenders
published included environmental considerations in the award phase. The contract was
also awarded on the basis of the most economically advantageous tender (MEAT) model
presented. Additional points were specifically awarded for the use of ecological cleaning
products; use of bio-based detergents accounted for 20% of the evaluation criteria.
The winning company met the District’s expectations in terms of the requests for bio-based detergents for several different
surfaces (such as glass, terracotta and fittings). The procurement resulted not only in the purchase of sustainable products, but
represented a chance to test out the inclusion of bio-based requirements and for the contracting public authority to gain valuable
experience on how to purchase environmentally-friendly products through a public procurement process.
3.6 GLOSSARY
The glossary contains 142 terms connected to the public
procurement of BBPS. This glossary will help you to understand
each term that could be used while preparing a tender or dealing
with the overall topic of BBPS and public procurement. Where
necessary, data sources are cited and offer the possibility to check
on certain terms and relevant EU Directives more precisely. The
glossary exceeds the limits of this Handbook, please refer to its
online version at:
https://www.biobasedconsultancy.com/en/about-biobased/glossary1
Partners:
ContactAgency for Renewable Resources (FNR), InnProBioOT Gülzow, Hofplatz 118276 Gülzow-Prüzen, Germany
Tel.: +49 3843 / 6930 - 0Fax: +49 3843 / 6930 - 102E-mail: [email protected]