+ All Categories
Home > Documents > FlexiderUSA · [email protected] 0510-83801018 TEL 0510-83801019 FAX [email protected] CHINA Wuxi...

FlexiderUSA · [email protected] 0510-83801018 TEL 0510-83801019 FAX [email protected] CHINA Wuxi...

Date post: 30-Jul-2018
Category:
Upload: doanphuc
View: 216 times
Download: 0 times
Share this document with a friend
8
An IMCI Company STEAM TURBINE CROSSOVER EXPANSION JOINTS USA Flexider
Transcript
Page 1: FlexiderUSA · info@flexider.com 0510-83801018 TEL 0510-83801019 FAX sales@flexider.cn  CHINA Wuxi Flexider Co., Ld. 18 FurongYilu Xishan Economic Development Zone

An IMCI Company

STEAM TURBINE CROSSOVER EXPANSION JOINTS

USAFlexider

Page 2: FlexiderUSA · info@flexider.com 0510-83801018 TEL 0510-83801019 FAX sales@flexider.cn  CHINA Wuxi Flexider Co., Ld. 18 FurongYilu Xishan Economic Development Zone

© 2013 FLEXIDER STEAM TURBINE CROSSOVER EXPANSION JOINTS2

USAFlexider

IntroductionSteam Turbines in coal-fired plants, and in combined cycle plants, use crossover piping to transfer high-pressure, high temperature steam from the IP Turbine to LP Turbine(s).

Expansion joints are located within the most crossover pipes to absorb the thermal growth of the crossover piping.

Variations of Crossover Piping & Expansion JointsAlthough pressure balanced crossover expansion joints are the most common type of expansion joint used throughout the industry, the design of pressure balanced expansion joints vary greatly between various turbines and turbine manufactureres.

Single pressure balanced expansion joint Multiple pressure balanced expansion joints Hinge and gimbal expansion joints

HIGH PRESSURE (HP) TURBINE

CROSSOVER EXPANSION JOINTS

CROSSOVER PIPING

LOW PRESSURE (LP) TURBINES

INTERMEDIATE PRESSURE (IP) TURBINE

GENERATOR

Page 3: FlexiderUSA · info@flexider.com 0510-83801018 TEL 0510-83801019 FAX sales@flexider.cn  CHINA Wuxi Flexider Co., Ld. 18 FurongYilu Xishan Economic Development Zone

© 2013 FLEXIDER STEAM TURBINE CROSSOVER EXPANSION JOINTS 3

USAFlexider

Some pressure balanced expansion joints may contain external wrappers around the bellows while other pressure balanced crossover expansion joints may contain tie rods.

In addition to the variation in the type and design of crossover expansion joints, the type and design of the bellows element(s) in the crossover expansion joint(s) vary between turbines and turbine manufacturers.

The bellows in crossover expansion joints may vary from a single plu or multi-ply, from un-reinforced or reinforced with root rings, or from U-shaped to toroidal shaped convolutions.

WRAPPER

TIE ROD

U-shaped convolutions with round bar root rings Toroidal shaped convolutions

Page 4: FlexiderUSA · info@flexider.com 0510-83801018 TEL 0510-83801019 FAX sales@flexider.cn  CHINA Wuxi Flexider Co., Ld. 18 FurongYilu Xishan Economic Development Zone

© 2013 FLEXIDER STEAM TURBINE CROSSOVER EXPANSION JOINTS4

USAFlexider

Operation

The steam exiting the Intermediate Pressure Turbine will typically be 700°F and varies from 75PSIG to 200PSIG. The pipe size can be anywhere from 36” to 84” in diameter. The resulting pressure thrust of the main pipe line bellows develops hundreds of tons force. In order to avoid transferring this load to the turbine nozzles, the expansion joint has a second identical bellows that creates an equal and opposite thrust load. These loads are tied together using an external device such as tie rods or “Wrapper”.

Exploded View

Page 5: FlexiderUSA · info@flexider.com 0510-83801018 TEL 0510-83801019 FAX sales@flexider.cn  CHINA Wuxi Flexider Co., Ld. 18 FurongYilu Xishan Economic Development Zone

© 2013 FLEXIDER STEAM TURBINE CROSSOVER EXPANSION JOINTS 5

USAFlexider

Typical replacement bellows cartridge

Preventive MaintenanceAvoid an unscheduled forced outage due to a crossover expansion joint bellows failure. There are no Non-Destructive Examination (NDE) methods that can be used to predict the remaining service life of a thin-wall bellows element in a steam turbine crossover expansion joint. To eliminate the possibility of a premature bellows failure, resulting in an unscheduled forced outage, it is recommended that the bellows elements in a steam turbine crossover assembly be replaced after 20 years of service.

If an existing crossover bellows has been in service for more than 20 years and is not scheduled for replacement, it is recommended that a spare bellows be fabricated and placed in storage. By having a spare replacement bellows in storage, the duration of an unscheduled forced outage caused by the failure of a crossover bellows can be minimized by eliminating the time required to fabricate the replacement bellows. Flexider USA can reverse engineer and fabricate replacement crossover bellows to match specific requirements for each specific turbine.

The reversed engineered

replacement bellows should

have the same movement

capability, bellows spring

rates (stiffness), cycle life,

natural frequency, materials

of construction, and heat

treatment as the existing

bellows.

Page 6: FlexiderUSA · info@flexider.com 0510-83801018 TEL 0510-83801019 FAX sales@flexider.cn  CHINA Wuxi Flexider Co., Ld. 18 FurongYilu Xishan Economic Development Zone

© 2013 FLEXIDER STEAM TURBINE CROSSOVER EXPANSION JOINTS6

USAFlexider

Replacing the BellowsIn addition to fabricating the replacement crossover bellows, Flexider USA can also replace the bellows in an existing crossover expansion joint assembly.

When replacing the bellows in an existing crossover assembly, it is critical that the exact position of both ends of the expansion joint be maintained to ensure the crossover expansion joint can be re-bolted to the turbine or the adjacent crossover piping.

Flexider USA has experienced personnel and the required fixturing to replace the bellows while maintaining the exact position of the inlet and outlet ends of the crossover assembly.

REPLACEMENT CROSSOVER BELLOWS

FIXTURING REQUIRED TO MAINTAIN EXACT POSITION AND ORIENTATION OF THE FLANGES WHEN REPLACING THE CROSSOVER BELLOWS.

Flexider USA can also provide fabric, rubber, and metal expansion joints for a variety of applications and industries. We have the expertise for all of your expansion joint needs.

For more information regarding crossover bellows replacement hardware and services, call us and a friendly customer service representative will be happy to assist you.

Before Bellows Replaced

After Bellows Replaced

Page 7: FlexiderUSA · info@flexider.com 0510-83801018 TEL 0510-83801019 FAX sales@flexider.cn  CHINA Wuxi Flexider Co., Ld. 18 FurongYilu Xishan Economic Development Zone

© 2013 FLEXIDER STEAM TURBINE CROSSOVER EXPANSION JOINTS 7

USAFlexider

About IMCIIndustrial Manufacturing Company (IMC) and Industrial Manufacturing Company International (IMCI) are a proud family of companies that produce a wide variety of innovative products for industry. With more than 3,500 employees and 33 worldwide manufacturing, sales and distribution facilities, it produces aircraft and aerospace ducting systems, gears, lubrication systems, steel and plastic lockers, storage systems, steel mezzanines, high-performance strainers, car and truck components, industrial hoses and industrial expansion joints.

Although each IMC and IMCI company operates independently, common to all of them is a profound respect for the integrity of established industrial principles and a practical openness to applications of new technology.

With individual histories spanning decades – and in two cases more than a century – the IMC and IMCI companies are time-tested leaders in their national and global markets.

Each IMC and IMCI subsidiary strives to tailor its products and services to the wishes of its customers, and each company’s success has been built on the development of enduring customer relationships. They take pride in providing not only products of consistently high quality, but also in flexible and responsive service and in realistically competitive prices.

IMC and IMCI will continue to expand their present holdings through investment in new manufacturing facilities and state of the art machinery and equipment. They will also grow through carefully selected acquisitions while maintaining an exceptionally sound financial base.

NORTH AMERICAN HEAdquARTERs

Flexider USA 15303 Olde Hwy 80 El Cajon, CA 92021 United States

(+1) 888-979-FLEX TOLL-FREE (+1) 619-618-2445 TEL (+1) 619-573-4412 FAX

[email protected]

RussIA

OOO Bijur Delimon Vsevolozhsky pereulok, bld. 2, stroenie 2 119034, Moscow,Russia

(+7) 495 637 3606 TEL

[email protected]

0510-83801018 TEL 0510-83801019 FAX

[email protected]

CHINA

Wuxi Flexider Co., Ld.18 FurongYiluXishan Economic Development Zone Wuxi, Jiangsu 214192China

(+27) 414056900 TEL(+27) 414526006 FAX

sOuTH AFRICA

Flexider S. Africa (Pty) Ltd.12 Libertas RoadStruandale, Port ElizabethSouth Africa, 6005

(+39) 011 2627111 TEL (+39) 011 2627404 FAX

[email protected]

ITALy

Flexider S.r.l.Corso Romania 501/2410156 TorinoItaly

pOLANd

Flexider Poland Sp. z o.o.Ul. Turynska 10043-100 TychyPoland

(+48) 32 217 96 44 TEL(+48) 32 217 96 28 FAX

[email protected]

FRANCE

Tuyaux Flexibles Rudolph1-15 Rue Friant78500 SartrouvilleFrance

(+33) 01-39-13-5585 TEL(+33) 01-39-13-1212 TEL(+33) 01-39-13-2599 FAX

[email protected]

Global Locations

Page 8: FlexiderUSA · info@flexider.com 0510-83801018 TEL 0510-83801019 FAX sales@flexider.cn  CHINA Wuxi Flexider Co., Ld. 18 FurongYilu Xishan Economic Development Zone

STEAM TURBINE CROSSOVER EXPANSION JOINTS

Flexider usA15303 Olde Hwy 80El Cajon, CA 92021

(+1) 888-979-FLEX TOLL-FREE(+1) 619-618-2445 TEL(+1) 619-573-4412 FAX

[email protected] | www.FlexiderUSA.com


Recommended