GLOBAL POLYMER GROUP
A MEMBER OF
The Rubber Industry ’s International Newspaper $99 per year. $4.50 per copyAugust 6, 2018
Crain Communications Inc
Entire contents © 2017by Crain Communications Inc.
Entire contents © 2018by Crain Communications Inc.
Alliance stretches reachHOT SPRINGS, Ark.—Adding cus-
tom silicone profile extrusion to its production capabilities was “the next logical step” for Alliance Rubber Co., according to Alliance Marketing Man-ager Joan Dennis.
“We’ve been extruding rubber for 95 years, and the processes for extruding silicone are very similar,” Dennis said.
“So many of the markets we serve also use silicone—automotive, agricul-tural, manufacturing,” she said. “Sili-cone is so far-reaching that we realized this was a natural progression for us.”
Alliance long has developed product
content and physical design profiles to meet customers’ specifications, ac-cording to Dennis.
In silicone, the company can produce custom silicone bands, cording and tubing, including open- or closed-cell tubing and solid tubing, she said. It can produce any durometer, color, di-mensions and performance character-istics required by the customer.
Hot Springs-based Alliance offers custom silicone profiles with wide envi-ronmental temperature ranges; UV, ozone, chemical and oil resistance; fire retardant features; and specifications for direct food contact, the company said.
By Miles MooreRubber & Plastics News Staff
Laying the foundationRubber-modified asphalt a key growth area for tire recycling
WASHINGTON—Tire-derived fuel and rubber-modified asphalt are the key growth areas in tire recycling, according to John Sheerin, director, end-of-life tire programs, at the U.S. Tire Manu-facturers Association.
But the paths of TDF and rubberized asphalt to market dominance haven’t exactly been straightforward, Sheer-in said in an interview connected with the July 18 release of the USTMA’s 2017 Scrap Tire Report, which records progress in scrap tire abatement and end-use up to that year.
“Added up, there’s been a net decrease in TDF, but markets go up and down all the time,” he said. “We’re lucky to have multi-ple markets for TDF.”
In fact, the very figures on scrap tire utilization vary from year to year, thanks to the vagaries of scrap tire generation, according to Sheerin.
In 2017, for example, 81.4 percent of the scrap tires generated in the U.S. reached end-use markets. This compares with 95 percent in 2013 and 87.9 percent in 2015.
But this decrease, Sheerin said, mostly is due to the constant increase in scrap tire generation. In 2017, it grew 4 percent to 4.19 million tons, according to the re-port.
TDF was the largest market for scrap tires in 2017, accounting for 43 percent of the total, the report said. Economic factors have created a drop in TDF demand, but also creates promise for the future in that market, Sheerin said.
TDF demand in the pulp and paper in-dustry fell with decreasing demand from newspaper and magazine publishers, he said. In utilities, TDF must compete with
See Tariffs, page 22
WASHINGTON—Nearly 50 wit-nesses, including Richard Small-wood, CEO and president of Sumi-tomo Rubber North America Inc., gave an overwhelmingly negative view of the Trump administration’s proposed tariffs on imported autos and auto parts at a hearing before the U.S. Department of Commerce.
Imposing tariffs on imported ve-hicles and parts only would harm the domestic auto industry, said Smallwood and a host of experts representing foreign and domestic auto makers, auto parts manufac-turers and distributors, auto deal-ers and foreign governments.
Commerce Secretary Wilbur Ross hosted the hearing July 19, two months after his May 23 an-nouncement that his agency would investigate imported autos and
auto parts under Section 232 of the Trade Expansion Act of 1962.
Under Section 232, the president may take action against any im-ported goods that threaten national security by eroding the economic status of a U.S. industry.
In his May 23 statement, Ross said there was evidence that vehicle and auto parts imports had been hurting U.S. industry for decades.
“The automobile industry contin-ues to drive American innovation,” Ross said in his opening remarks at the July 19 hearing. “It provides the backbone of our industrial economy. …We are carefully examining all of the information that you are pro-viding and that our analysts are gathering.”
According to Smallwood and oth-er witnesses, however, even a curso-ry examination would show tariffs
By Miles MooreRubber & Plastics News Staff
By Miles MooreRubber & Plastics News Staff
Sheerin
Industry testifies against Trump’s tariffs
See Alliance, page 22
See Rubber, page 21
Conference News - pages 16 & 18
The Rubber Industry ’s International Newspaper $99 per year. $4.50 per copySeptember 17, 2018
Crain Communications Inc
Entire contents © 2017by Crain Communications Inc.
Entire contents © 2018by Crain Communications Inc.
SALEM, Va.—Members of United Steelworkers Local 1023 in Salem have ratified a four-year labor deal with Yo-kohama Tire Manufacturing Virginia L.L.C.
The final tally was not released, but Local 1023 said on its Facebook page that the deal runs through Sept. 14, 2022, and that the vote passed by a “majority.”
A Yokohama spokesman confirmed the agreement covers about 600 bar-gaining unit employees. The Salem plant employs 760.
Tetsuro Murakami, president of Yo-kohama Tire Manufacturing Virginia, said in a statement that negotiations progressed well, adding that both sides were professional and worked hard throughout the process.
“We’ve always had a strong, positive working relationship with the union
and both sides can feel good about the result,” he said.
No details on the pact were released. “It’s a fair settlement that’s good for
both sides,” Local 1023 President Steve Jones said in a statement. “It’s a four-year deal that follows the pattern.”
The previous deal also spanned four years and expired Aug. 13. The union had been working under an extension of the previous contract.
The union looks on track to be busy in 2022 as 12 other locals covered by three agreements with Bridgestone Americas Inc., Goodyear and Sumito-mo Rubber USA L.L.C. also are set to expire in July of that year. Those five-year pacts were agreed to and ratified in August 2017.
Until then, the union has other deals with Cooper Tire & Rubber Co., Miche-lin/BFGoodrich and Titan Internation-al Inc. covering eight combined locals set to expire between 2019 and 2021.
By Chris SweeneyRubber & Plastics News Staff
USW ratifies labor deal with Yokohama
Datwyler expands sealing reach with two deals
Freudenberg unit looks to adapt as automotive industry changes
New technologies, new opportunities
Kramer addresses ITEC
ALTDORF, Switzerland—Dat-wyler Holding A.G. has been busy extending the reach of its Sealing Solutions business recently.
The firm made two acquisitions to strengthen its global footprint and expand into a new industry. Datwyler finalized an agreement to acquire Bins Industria de Artef-atos de Borracha Ltda., an auto-motive sealing manufacturer lo-cated in Poto Alegre, Brazil. It marks the first manufacturing site for Datwyler in the South American region and will allow it to funnel its products through that site to serve local customers.
In a separate move, the firm agreed to acquire Parco Inc., a U.S.-based manufacturer of O-rings for a variety of industries, primarily oil and gas, which represents a new market for Datwyler. The deal is expected to close in the coming weeks.
Datwyler did not disclose financial details for either transaction.
“We always are looking for family-owned compa-nies because that is an im-portant part of our strategy,”
Datwyler CEO Dirk Lambrecht said. “We try to identify companies that are in a similar field in which we are, that happened with both Bins and Parco. Often times the reason such companies are willing
to go into discussion with us is because we have a family
background and offer the typical values of a fami-ly-owned company. That helps us in negotiations with some parties.”
See Datwyler, page 21
Adapt or die is nature’s way.Freudenberg Sealing Technologies knows
this, and it’s getting ahead of the curve.The automotive industry is entering one
of its most exciting—and turbulent—de-cades with E-mobility and autonomous ve-hicles pushing original equipment manu-facturers and their suppliers to change rapidly.
If these technologies come to fruition, FST will need to adapt. CEO Claus Moe-hlenkamp said the firm could lose up to 70 percent of its automotive sales, or about
$1.02 billion, if it doesn’t embrace these new opportunities. Most of its seals are found in the traditional powertrain. And while that won’t be going anywhere in the immediate future, when Moehlenkamp looks at projections for the next 15-20 years, it’s clear the company needs to act.
“Many opportunities we can develop from within given our technology founda-tion,” Moehlenkamp said. “For instance, if you think about a thermal management cooling system, we have many component opportunities to participate in that within our existing competencies. But that would
Our special
Seals and
Gaskets Report
begins on Pag
e 12.
See Freudenberg, page 21
By Chris SweeneyRubber & Plastics News Staff
Datwyler CEO Dirk Lambrecht said Parco will expand the firm’s O-ring portfolio and give it a new strategic market: Oil and gas.
Claus Moehlenkamp, CEO of Freudenberg Sealing Technologies, discusses his com-pany’s role within a changing automotive industry at the Center for Automotive Re-search’s recent Management Briefing Seminars.
By Chris SweeneyRubber & Plastics News Staff
Rich Kramer, Goodyear chairman, CEO and president, gave the keynote address at the 2018 International Tire Exhibition & Conference, held Sept. 11-13 in Akron. See coverage of his speech and the event on Page 4.
The Rubber Industry ’s International Newspaper $99 per year. $4.50 per copyJune 11, 2018
Crain Communications Inc
Entire contents © 2017by Crain Communications Inc.
Entire contents © 2018by Crain Communications Inc.
Registration Open 2018 ITEC TIRE MANUFACTURING SEPT. 11-13, 2018 AKRON, OH, USA ITEC-TIRESHOW.COM
Autonomous vehicles pushing the industry toward new technologies
Cars long have been considered a symbol of freedom, and soon that freedom will extend to the driver.
A future where electric-powered, autonomous vehicles are the norm has forced the automotive industry into rapid change. Suppliers already are re-aligning themselves to prepare for these game changing technologies, and some say they may begin to manifest within the next 10 years.
But there certainly is caution among industry stakehold-ers, with many hurdles to overcome before this dream world of self-driving cars becomes a reality. For starters, less than 1 percent of the global fleet consists of electric vehicles, which are basically a prerequisite to self-driving cars.
“Electric vehicles and autonomous vehicles go hand-in-hand,” said Shashank Modi, research engineer at the Center for Automotive Re-search. “Electric platforms enable a lot of au-tonomous features because you already have those wiring harnesses in place.”
Hurdles aside, Matt Chapman—vice president global marketing and E-mobili-ty, automotive sales, at Freudenberg-NOK Sealing Technologies—said the adoption of electric vehicles is inevitable. CAR
Group, which studies the automotive industry, outlined that fully autonomous vehicles will account for less than 4 percent of new sales by 2030, increasing to more than 50 percent by 2040. As for EVs, those will only comprise 8 percent of the market by 2030, but will grow rapidly beyond that.
Tesla is the best-known brand currently on the EV mar-ket, but OEMs like Ford, General Motors, Honda, Volvo and Daimler A.G. have funneled billions toward new elec-tric models to join the fray in the coming years.
“It’s got to be one of the most substantial technology shifts in the last 20 years,” said Chris Couch, vice president of innovation and product groups at Cooper Standard Auto-motive Inc., which produces such rubber products as seals
and hoses.“I think it’s a great time to be in our business because it’s a chance to bring some material sci-
ence to this problem. There’s huge opportunity, and that is to make lighter parts, which you need for EVs because every ounce counts in terms of the vehicle range, and it’s got to be
quiet. Those two things can be contra-dictory with the old materials we used to use. We need new and better materi-als to achieve those.”
Changing the game
This Game Changing Technology spe-cial report is a joint project between Rubber & Plastics News and sister Crain Communications publications Tire Busi-ness and European Rubber Journal.
It takes an in-depth look at how new technologies will affect the tire and rubber industries, beginning with the many hurdles autonomous and electric vehicles face before they be-come prevalent. Page 9.
Regulations still need to be out-
lined and developed fully for these emerging technologies. Page 10.
Tire industry stakeholders share their views on autonomous and elec-tric vehicles, and what the industry is doing to prepare. Pages 11-13.
Freudenberg-NOK heat shields help protect electric batteries. Page 14.
ContiTech A.G.’s global Fluid Sys-tems business shows how digitaliza-tion can be applied throughout the hose industry. Page 16.
A Penn State research team uses 3D printing to improve the cell adhe-sion and strength of a silicone polymer. Page 17.
Industry experts weigh in on the im-pact of these new vehicle technologies. Pages 18-19.
More viewpoints and subsequent re-ports will be included online at www.rubbernews.com.
Pictured above: GM’s autonomous concept car interior.
By Chris SweeneyRubber & Plastics News Staff
AI
MORE INSIDE, ONLINE:See Technology, page 20
Latest round of steel tariffs could lead to retaliation by allies
WASHINGTON—President Trump’s decision to levy tariffs against steel and aluminum imported from Canada, Mexico and the European Union was met with dismay from nearly every sector and promises of retaliation from the affected countries.
Representatives of the tire and auto parts indus-tries expressed grave concerns about the presi-dent’s actions, and even the United Steelworkers union, which generally supports all measures to protect American workers, said steel and alumi-num tariffs against Canada were “unacceptable.”
The USW also has a substantial membership base in Canada.
Trump issued two proclamations May 31, going into effect the next day, ending the suspension of 25 percent tariffs on steel and 10 percent tariffs on aluminum imported from Canada, Mexico and Europe.
The administration originally issued the tariffs March 8 under Section 232 of the Trade Expansion Act, which allows remedial action against imports deemed to present a national security threat.
“Measures are in place to address the impair-ment to the national security threatened by im-ports of steel and aluminum from Argentina, Bra-zil and Australia,” a May 31 White House statement said. “At this time, similar measures are not in place with respect to steel or aluminum imports from Mexico, Canada or the European Union.”
The statement said the Trump administration will continue discussions on trade with Canada, Mexico and Europe, but left no doubt the adminis-tration considers the tariffs necessary.
“The Section 232 steel and aluminum tariffs
By Miles MooreRubber & Plastics News Staff
See Tariffs, page 5
Canadian Prime Minister Justin Trudeau watch-es as President Donald Trump speaks.
2019 MEDIA GUIDE
RubberNews.com
Issue Date Editorial Focus Bonus Distribution Ad Order Due
January 14 Process Oils Focus Issue January 3
January 28 2019 Forecast Issue January 16
February 11 Carbon Black including Silica/Thermal Black January 30
February 25 Custom Mixing Annual Report with Listing of Custom Mixersl Tire Technology Expo 2019, March 5-7, Germany February 13
March 11 Silicone Focus Issue February 27
March 25 Oil and Gas Focus Issue March 13
April 8 Game Changing Technology Issue March 27
April 22 Rubber in Automotive Special Report #1 April 10
May 6 Healthcare Elastomers Focus Issue l Healthcare Elastomer Conference, May 21-22, Schaumburg, IL April 27
May 20 Molded Goods Focus Issue May 8
June 3 Synthetic Rubber Focus Issue May 22
June 17 Rubber Machinery Focus Issue June 5
July 1 North America Rankings Issue with 2019 Mid-Year Review June 19
July 15 Wire and Cable Focus Issue July 3
July 29 Latex Focus Issue l International Latex Conference, August 6-7, Akron, OH July 17
August 12 Chemicals and Additives Focus Issue July 31
August 26 Seals and Gaskets Focus Issue August 14
September 9 34th Annual Global Tire Report l 2018 ITEC In Focus: Green Tire, Sept. 25-26, Cuyahoga Falls, OH August 28
September 23 LSR Report Issue September 11
October 7 International Elastomer Conference l International Elastomer Conference, Oct. 8-10, Cleveland, OH September 25
October 21 Laboratory and Testing Focus Issue October 9
November 4 Hose Focus Issue l Hose Manufacturers Conference, Nov. 12-13, Cuyahoga Falls, OH October 23
November 18 Rubber in Automotive Special Report #2 November 6
December 2 Belting Focus Issue November 20
December 16 2019 Year in Review/Executive of the Year December 4
December 30 2020 Rubber Directory and Buyers Guide November 11
Editorial content subject to change at Publisher's discretion.
rubbernews.com
2019 Editorial Calendar
Ad Size/Insertions: 1X 6X 13X 26X54” Tabloid Page $232 $222 $213 $205
40” $265 $252 $238 $228
30” $285 $272 $265 $253
20” $309 $295 $285 $272
10” $332 $321 $307 $299
5” $357 $343 $328 $320
1” $377 $364 $351 $342
Minimum rateholder for large space units is 5 column inches.Rates based on number of insertions used within 12 months from date of first insertion of contract period.See print mechanical specifications and payment terms and publisher's protective clause for more information.
Inch RatesFull or fractional page spread ads charged for at the rate of each individual unit on each facing page. Multiple units of space in 1 issue are counted as individual units for purpose of determining frequency discounts. Strip ads accepted - consult Publisher.
Agency Commission15% of gross billing allowed to recognized agencies or advertisers placing their own media insertions. The discount applies only to space, color and position provided account is paid within 30 days of invoice date. Commissions not allowed on other charges such as inserts, han-dling, special binding or trimming inserts, reprints or other mechanical charges unless otherwise waved by Publisher.
Standard Colors$1,104 per page; $1,884 per spreadStandard colors are produced by using the four color process color inks CMYK. For a two-color standard ad, the first color is always black. The second color can be made using four-color process but must visu-ally appear as one color.
Four Color Process$2,502 per page; $4,248 per spreadContact
Brent Weaversales manager330-865-6119 or [email protected]
Pete McNeildisplay sales representative330-865-6109 or [email protected]
rubbernews.com
2019 Rate Card #48
Ad Size/Insertions: 1X 6X 13X 26XFull Tabloid Page (54”) $12,528 $11,988 $11,502 $11,070
Jr. Page (30” Standard Page) $8,550 $8,160 $7,950 $7,590
2/3 Page (20”) $6,180 $5,900 $5,700 $5,440
1/2 Page (15”) $4,980 $4,815 $4,605 $4,485
1/3 Page (10”) $3,320 $3,210 $3,070 $2,990
1/4 Page (7.5”) $2,678 $2,573 $2,460 $2,400
1/6 Page (5”) $1,785 $1,715 $1,640 $1,600
Display Rates
Black and White Rates (Gross)Effective Jan. 1, 2019
Insertions Rate Per Inch Column Width1 time $273 1 column 17/8"3 times $262 2 columns 4"
6 times $251 3 columns 6"
13 times $233 4 columns 81/8"
26 times $224 5 columns 101/4"
Insertions/Consecutive Ads
Single-Wide Rates Per Year
13 times x $165 each $2,145 per half year
26 times x $139 each $3,614 per full year
Classified CalculatorTo determine number of inches in ad, multiply number of columns by number of inches of ad depth.
Example: 2 column ad x 2" = 4" TotalX (1x rate) $273
$1,092
Maximum width of classified ad: 5 columns - 101/4"Maximum depth: 13"Minimum depth: 1"
Color2-color flat rate (regardless of size) - $200 additional to space4-color flat rate (regardless of size) - $400 additional to space
Other ServicesBlind box number service charge: $20 per insertion.Replies sent daily.15% agency commission allowed on camera-ready ads.
Ad Close12 Noon EST, 10 calendar days prior to issue date.
Classified Ads on the WebYour complete classified ad will be on the RubberNews.com website at no extra charge. And your classified ad will be linked back to your website, providing immediate results.
Mold Mart AdvertisingMold Mart appears in each issue of Rubber & Plastics News. Mold equipment manufacturers and suppliers can purchase one column inch ads to list their com-panies and services under any header they choose in molding.
Effective Jan. 1, 2019
Boldface: $150 extraLogo: $200 extraBilled on first insertion.
Ad Close12 Noon EST, 10 calendar days prior to issue date.
20 Rubber & Plastics News • September 17, 2018 www.rubbernews.com
COMPRESS PRESSES
BUILD AWARENESS With frequency in Rubber & Plastics News and Rubbernews.com
Call about our New Advertiser discount program that maximize your exposure!
CALL 330-865-6117 • EMAIL [email protected]
PRESSES
CUSTOM MANUFACTURING
DEFLASHINGHELP WANTED HELP WANTED
ClassifiedsBrooke StenderClassified Sales Manager
Phone: 330-865-6117Email: [email protected] our website at: www.rubbernews.com
M The Rubber Industry’s SOURCE for Molding Equipment & SuppliesVisit our web site at: www.rubbernews.comMoldMART
Visit us at: rubbernews.com
HELP YOUR BUSINESS GROWIN 2018
Advertise in RPN Classifieds
Contact: Brooke Stendertel: 330-865-6117 or [email protected]
MOLD RELEASES MOLD RELEASES MOLD RELEASESHYDRALIC PRESSES
TRANSFER PRESSES
Custom Calendering Uncured Rubber/Coated Fabric - Knit, Woven, Tire Cord
Custom Rubber Molding We Specialize in Rubber to Metal/Fabric Bonding
Engineers/Chemist on Staff to Assist in Your Needs
www.longwoodindustries.com Contact (276) 595-1801
Wytheville, VA
HYDRAULIC & INDUSTRIAL HOSE & FITTING ENGINEERSBridgestone HosePower is currently seeking Hydraulic & Industrial Hose & Fitting Engineers.
North Florida & Phoenix, AZ. Excellent pay and benefits.
NORTH FLORIDA/PHOENIX, AZCome Work with a GREAT TEAM!!
PH: 904-264-1267 EXT10116 FAX: 904-621-0960EMAIL: [email protected] • WWW.HOSEPOWER.COM
SEEKING ENGINEERS
RECLAIMED RUBBER
SBR • NR • EPDM • BUTYL
• Lower compound costs• Get Consistent properties
Contact us for reclaimed rubber
com
Custom Molding Solutions937-773-3420
(800) 262 5823
LubricationTechnology
McLubeTMMcLube.com
PROCESS ASSISTANCE AND FREE SAMPLES
CONSULTATIVE SALES ENGINEERfor Custom Rubber Products
Aero Rubber is looking for a consultative sales engineer to assist in growing our custom rubber part business. This is not a telemarketing position. It is a 95% inside non commission position, salaried with potential performance bonus. The position will focus on new and existing customers to clearly understand their needs and quote to the customer’s requirements.
THIS POSITION EXPANDS OUR CURRENT SALES STAFF
BENEFITS Medical Dental/Vision 401K Top Salary Performance Bonus Relocation Package
ABOUT AERO Located in SW Suburb of Chicago 45 Years Strong ISO 9001:2015
QUALIFICATIONS • 5 years minimum successful
B2B industrial sales experience• Rubber sales experience a plus
(molded, extruded & fabricated parts)
• ISO and/or QS quality system experience a plus
• Ability to work closely with production & quality control personnel
TO APPLY:Send cover letter and
resume to:[email protected]
8100 W. 185th StreetTinley Park, IL 60487
www.aerorubber.com 800.662.1009“Our Customers De�ne Quality – We Make It Happen”
Mold Mart MAXIMIZES your exposure with print ads and online posting on RubberNews.com Call or email forintroductory special rates:
330-865-6117 [email protected]
Exciting new opportunityIncrease your Help wanted ads visibility
by being featured in our Most Read Stories of the Past Week newsletter.
For more information contact Brooke Stendertel: 330-865-6117 or [email protected]
Don’t Miss Your Chance to Advertise in These Upcoming Issues
Contact Brooke Stender 330-865-6117 or [email protected]
October 1International
Elastomer Conference
Closes: September 19
October 29Laboratory and Testing
Equipment Annual ReportCloses: October 17
November 12Rubber in Automotive
Special Report #2
Closes: October 31
December 102018 Year in Review/Executive of the Year
Closes: November 28
November 26Belting
Annual Report
Closes: November 13
October 15Hose Manufacturing
Annual Report
Closes: October 3
rubbernews.com
Classified/Mold Mart Advertising
Classified AdvertisingReach 12,000+ readers every two weeks in the rubber industry's newspaper.Run the same classified ad on the RPN website expanding your reach globally (at no additional charge).Add color to your classified ad for high impact
Effective Jan. 1, 2019Black and White Rates (gross)
ContactBrooke Stender, classified sales manager330-865-6117 or [email protected]
1 Month 3 Months 6 Months 12 MonthsInterstitial (640x480 pixels) (on mobile 300x100 pixels) $2,000 (net) $4,500 (net) $8,520 (net) $15,000 (net)
Leaderboard Set (728x90 pixels) (on mobile 300x50 pixels) Same ad at the top of the page and at the bottom of the page
$3,857 (net) $5,781 (net) $7,728 (net) $12,852 (net)
Large Tower (300x600 pixels) Second and third positions, right side $2,605 (net) $4,044 (net) $5,460 (net) $9,048 (net)
Large Rectangle (300x250 pixels) (on mobile 300x50 pixels) Top position, right side**
$1,933 (net) $2,964 (net) $3,900 (net) $6,456(net)
Rich Media-Video, Webinars, Breaking News Alerts are also available Contact your sales representative
ContactBrent Weaversales [email protected]
Pete McNeildisplay sales [email protected]
** If rich media-video ad is sold, large rectangle ad will move below video ad Fixed positions on each page and window frameAll ads rotate per view
File Size 640x480, 728x90, 300x250, 300x600, initial 40K, gif, animated gif or jpg.
Mobile ad: 300x50, 15K, static gif or jpg. 300x100, 30K, static gif or jpg.
If providing animated ads, please send a single frame of the most pertinent information from the ad to serve to users who do not have Flash.
RubberNews.com RatesEffective Jan. 1, 2019
total visitors: 90,704*unique visitors: 67,330*
RubberNews.comRubber product manufacturers turn to RubberNews.com as the online destination for all their information needs. Rubber & Plastics News' website, RubberNews.com, has news updated daily and an extensive online archive as well as statistics and rankings. RPN's website houses the rubber industry's most comprehensive offering of web-based news products.
RubberNews.com’s attention-grabbing online ad units offer you the most cost-effective way to strengthen your brand and drive traffic to your company’s site.
Leaderboards are “supersized” banners that appear at the top of the page, directly within the user’s view and adjacent to important site tools such as the search box and primary navigation.
Large tower ads, large rectangle ads and banner ads are power-ful options for your campaign and give your company exposure throughout the prime areas of the RubberNews.com’s website.
*SOURCE: Omniture, for September 2018
rubbernews.com
RubberNews.com Advertising
ContactBrent Weaversales [email protected]
Pete McNeildisplay sales [email protected]
Per Day Per WeekLeaderboard Set (728x90 pixels) (on mobile 300x50 pixels) Ad at the top of the page and bottom of the page
$666 (net) $1,945 (net)
Large Rectangle (300x250 pixels) (on mobile 300x50 pixels) $473 (net) $1,363 (net)
Daily NewsmailRubber & Plastics News' Daily Newsmail is sent to subscribers around the world. All web-based ads on any of the pages accessed are linked directly to each advertiser's website for immediate accountability.The easy-to-read format is the perfect way for busy industry professionals to stay on top of the ever-changing rubber industry.Banner ads appear after every third headline.The skyscraper ad offers great visibility and week long exposure.
RubberNews.com's daily newsmail ratesEffective Jan. 1, 2019
File Size 40K MAX. Static gif or jpg preferred. No flash (it will not work). Static images are preferred because several programs, such as Outlook 2007, will truncate the banner after the first frame. If advertiser chooses to animate, make sure all pertinent information is included in the first frame. Large files sizes are restricted/refused as they can be eliminated or flagged as spam in an email.
subscribers: 8,962*
subscribers: 5,945*
*SOURCE: Omniture, for September 2018
1 Month 12 MonthsLeaderboard Set (728x90 pixels) (on mobile 300x50 pixels) $849 (net) $9,288 (net)
Large Rectangle (300x250 pixels) (on mobile 300x50 pixels) $3,924 (net)
Rubber in Automotive eMailRubber in Automotive, a weekly newsletter, delivers some of the latest auto industry news, with an emphasis on auto component and tire suppliers, along with industry trends. The news mail format is housed as a separate website, updated daily, providing double exposure for advertisers.
Rubber in Automotive email ratesEffective Jan. 1, 2019
rubbernews.com
Newsmail & email Advertising
1 Month 12 MonthsLeaderboard Set (728x90 pixels) (on mobile 300x50 pixels) $849 (net) $9,290 (net)
Large Rectangle (300x250 pixels) (on mobile 300x50 pixels) $4,308 (net)
1 Month 12 MonthsLeaderboard Set (728x90 pixels) (on mobile 300x50 pixels) $849 (net) $9,288 (net)
Large Rectangle (300x250 pixels) (on mobile 300x50 pixels) $3,924 (net)
ContactBrent Weaversales [email protected]
Pete McNeildisplay sales [email protected]
SiliconeNews eMailRubberNews.com's SiliconeNews is delivered by email every other week to subscrib-ers in the silicone industry. It contains news about the natural and synthetic silicone markets published by Rubber & Plastics News and other news sources the previous two weeks. The news mail format is housed as a separate website, updated daily, providing double exposure for advertisers.
SiliconeNews ratesEffective Jan. 1, 2019
LatexNews eMailLatexNews is a free monthly e-newsletter specifically designed for rubber manufacturing firms that specialize in latex and latex products. It contains news about the global natural and synthetic markets published by Rubber & Plastics News and other news sources the previous month. The news mail format is housed as a separate website, updated daily, providing double exposure for advertisers.
LatexNews ratesEffective Jan. 1, 2019
File Size 40K MAX. Static gif or jpg preferred. No flash (it will not work). Static images are preferred because several programs, such as Outlook 2007, will truncate the banner after the first frame. If advertiser chooses to animate, make sure all pertinent information is included in the first frame. Large files sizes are restricted/refused as they can be eliminated or flagged as spam in an email.
subscribers: 3,040*
subscribers: 6,017*
*SOURCE: Omniture, for September 2018
rubbernews.com
email Advertising
Rubber & Plastics News' Custom WebinarsRubber & Plastics News' custom webinars are powerful tools to reach "about-to-buy" prospects, designed to generate qualified leads. RPN webinars are ideal for promoting a sponsor as a leader and authority on current and complex issues or in connection with a product or service.
Formatl Up to 300 live participants.l 60 minutes for live, interactive presentation includes live text Q&A and up to 2 live audience polls.l 3 months of hosted on-demand archive - registration required.l Detailed tracking of registrant data including full contact information.
Sponsor Benefitsl Sponsor's logo will be included on ads promoting the event in RPN.l Sponsor's logo will be included on e-vites (email invitations) to the RPN and sponsor's databases.l Sponsor's logo will be included on RPN's electronic promotion on RPN's website. RPN will provide the same link for the sponsor to use on its website. This link would be up on the RPN website for 3 months after the event where the content will be available in an on-demand basis.l Sponsor will be permitted to make a 60-second introduction.l Sponsor's logo will be displayed on the window format of the presentation for the live content and the on-demand basis.l Sponsor's logo will be included on thank you confirmation emails after a user has registered and an email follow-up reminding users to mark their calendar.l Each attendee will be required to provide demographic information (as determined by RPN and sponsor).l Sponsor will receive all the collected registrations as well as the on-demand archived registrations.l Sponsor may provide up to 3 qualifying questions.
Contact your sales representative for rate information.
ContactBrent Weaversales manager330-865-6119 or [email protected]
Pete McNeildisplay sales representative330-865-6109 or [email protected]
rubbernews.com
Custom Webinars
White Paper Lead Generation A white paper is a powerful B2B offer that can stimulate high click-through rates, result in successful lead generation, and influence purchases. You will receive qualified leads from a brand that is already engaged with the audience you are trying to reach.
How it worksYou provide us with a report, white paper, or other document. We place it on our website and notify our readers via email that the resource is available (your logo on the eblast to 24,000 recipients, as well as weekly promotion on our daily enewsletters for one month). When our readers click through to access the white paper, they answer a few customizable questions before downloading it, and you receive all of the information. The white paper (with your logo) will be housed on RubberNews.com for a minimum of one year.
4 Basic Steps1. Readers receive a promotion about your white paper and click on a link taking them to a registration page.2. Readers register to access your white paper, and also answer up to five questions of your choice.3. After registering, readers are given access to your materials.4. You receive an Excel file with detailed registrant contact information and the responses to your questions.
Benefitsl Easily measure ROI and follow up quickly on hot leads.l Use up to five custom questions for research as well as lead qualification.l Promotional support across our website, enewsletters, and through dedicated email campaigns in order to maximize the number of leads.l White paper will be archived on our website for a year.l General promotion of white paper library in print and online.l Further establish your brand as a thought leader in the industry.
Sponsor receives a minimum of one eblast and four ads in daily enewsletter from RubberNews.com.
Rates
ContactBrent Weaversales manager330-865-6119 or [email protected]
Pete McNeildisplay sales representative330-865-6109 or [email protected]
1 Month Program 3 Month Program
$4,700 net $11,004 net
minimum one eblast and four ads in daily enewsletter from RubberNews.com
rubbernews.com
White Papers
2020 Rubber Directory & Buyers GuidePrinted December 30, 2019
The Rubber Directory & Buyers Guide is where your customers look for:l Suppliers of raw materials and ingredientsl Materials and ingredients suppliersl Custom or special services available to the rubber industryl Machinery and equipment suppliersl Laboratory and testing equipment suppliersl Services offered by consultants and testing organizations
Take advantage of advertising in the product category index sections where your customers are looking for products or services you provide.Advertising in the 2020 Rubber Directory & Buyers Guide will be included as part of your print frequency program in Rubber & Plastics News.
Ad closing for the 2020 Rubber Directory & Buyers Guide is November 5, 2019.
Added ValueAdvertisers in the 2020 Rubber Directory & Buyers Guide are included in the online version of RubberNews.com's Rubber Directory & Buyers Guide at no additional cost.l Tab Divider and Special Position advertisers receive a Leaderboard ad*, 728x90, run of site.l All other size advertisers receive a vertical rectangle ad*, 300x250, run of site.l All advertisers receive 300x250 space next to their exclusive listing.
PLUSl All web ads will link to the advertiser's website.l Advertisers' company name will be at the top of searches for products and services they provide.
*Ads rotate per page view
Rubber Directory & Buyers Guide Online Ad Specs
Online Ads Size
Leaderboard 728x90 pixels
Vertical Rectangle 300x250 pixels
Print Ad Size
Image 7-1/2” x 10”
Trim 8-1/4“ x 10-7/8”
Bleed 8-1/2” x 11-1/8”
Rubber Directory & Buyers Guide
Search the directory online at www.rubbernews.com
42nd Edition
• 900+ Rubber Product Manufacturers in the U.S. and Canada Companies manufacturing products from rubber and rubber-like materials.
Listing of more than 300 rubber products cross-referenced to the companies that manufacture them.
• 1,000+ Suppliers to Rubber Product Manufacturers Listings of products or services cross-referenced to the suppliers that handle them.
20192019
246 RPN Rubber Directory and Buyer’s Guide246 RPN Rubber Directory and Buyer’s GuideVystar Corporation2484 Briarcliff Rd NE, #22 Atlanta, GA 30329 (866) 674-5238E-mail: [email protected] Founded: 2001.Publicly Held.
Material and Ingredients: Natural rubber (NR)-latex
W
Wacker Chemical Corporation3301 Sutton Rd. Adrian, MI 49221-9397 (517) 264-8500(888) 922-5374 Fax: (517) 264-8246E-mail: [email protected] Founded: 1914.Publicly Held.
Key Personnel: Vice President ��������������������� Axel SchmidtVice President, Finance ����Tobias BrandisDirector-SILMIXR California � Kim LiberatoDirector-SilmixR Ohio ��������� Silje Gridsvag
Material and Ingredients: Adhesion promoters, Compounds-polymers, Compounds-silicone, Crosslinking agents, Elastomers (other), Extenders & fillers, Fluorosilicone rubbers, Heat transfer oils, Mold releases, Reinforcing agents-general, Resins-general, Sealants & encapsulants, Silane coupling agents, Silica, Silicone rubber (Q), Silicone rubber (Q)-bases, Silicone rubber (Q)-compounds, Silicone rubber (Q)-gums, Silicone rubber (Q)-liquids, Thermoplastic elastomers, Thermoplastic elastomers-polyamide blocks
Warwick Mills, Inc.301 Turnpike Rd. New Ipswich, NH 03071 (603) 291-1000(603) 878-1565 Fax: (603) 878-4306E-mail: [email protected] Founded: 1888.Privately Held.
Key Personnel: President, Chief
Engineer ��������������� Charles A� HowlandVice President, Business
Development �����������������Jenny Houston
Markets Served: Aerospace, Apparel, Automation, Automotive, Automotive aftermarket, Automotive original equipment, Aviation/aerospace, Industrial, Irrigation, Medical, Military, Mining, Oil and gas, Safety, Sport/hobby, Textile�
Machinery Used: Calenders, Coaters, Cutters-Sonic, Cutting, Cutting-Slitter Rewinders, Cutting-Sonic, Laminators, Spreaders�
Products: Safety items, Textiles�
Material and Ingredients: Coated fabrics & coatings, Processing aids, Textiles & fabrics, Treated fabrics & liners
Wego Chemical & Mineral Corporation
239 Great Neck Rd. Great Neck, NY 11021 (516) 487-3510Fax: (516) 487-3794E-mail: [email protected] Founded: 1978.Privately Held.
Material and Ingredients: Coloring agents-internal/pigments, Com-pounds-chemical, Dessicants, Pigments, Resins-general, Silica gels, Stearic acids, Titanium dioxide, UV light absorbers, Zinc Oxide
Weir Minerals Linatex3459 South 700 W. Salt Lake City, Utah 84119 (801) 574-2100Fax: (801) 261-5587E-mail: [email protected]
Key Personnel:Marketing Communications
Manager ����������������������������Lori Masters
Material and Ingredients: Com-pounds-polymers, Latexes, Natural rubber (NR)-latex, Natural rubber (NR)-other, Nitrile rubber, Polyurethane rubber
Western Reserve Chemical Corporation
4837 Darrow Rd. Stow, OH 44224 (330) 650-2244(800) 321-2676 Fax: (330) 650-2255E-mail: [email protected] Founded: 1976.Privately Held.
Key Personnel:President ��������������������Ronald F� AndersonVice President, Business
Development ��������������������������Tony HallCustomer Service
Manager ��������������������Maria BaughmanPurchasing
Manager ��������� Betsy Fackelman SmithRegional Sales Manager ����������Dave KellyRegional Sales Manager ���������Doug Ruch
Material and Ingredients: Accelera-tors-curing agents, Accelerators-vul-canization, Antiblocking agents, Antioxidants, antiozonants, Antistatic agents, Blowing agents, Com-pounds-latex & specialty, Crosslinking agents, Cure activators, Curing agents-accelerators, Curing agents-peroxides, Curing agents-res-ins, Curing agents-sulfur, Dessicants, Dispersing agents, Dispersions-chem-ical, Dispersions-latex, Disper-sions-polymeric, Emulsifiers-latex, Emulsifiers-polymerization, Extenders & fillers, Homogenizing agents, Latex chemicals-general, Latex chemi-cals-stabilizers & thickeners, Lubricants-internal, Magnesium oxide, Natural rubber (NR)-dry (bale, crumb), Peptizers, Peroxides, Plasticizers & softeners, Processing aids, Resins-adhesion, Resins-reinforce-ment, Resins-tack, Retarders-flame, Retarders-vulcanization, Rubber (General-Not Classified), Rubber (General-Not Classified)-ground rubber, Stearic acids, Styrene-butadi-ene rubber (SBR), Styrene-butadiene rubber (SBR)-synthetic rubber resins (high styrene, vinyl, other), Surfactants, UV light absorbers,
Vulcanizing & curing agents, Waxes, Zinc Oxide
Westwood Plastics, Inc.1880 Broken Lance Ln. Rockwall, TX 75032 (972) 840-2424(800) 972-6855 Fax: (972) 840-2525E-mail: [email protected] Founded: 1999.Privately Held.
Key Personnel:President �����������������������������Dan BrecheenInside Sales �������������������� Karen Brecheen
Material and Ingredients: Batch inclusion bags, Film & sheet, Release papers, Treated fabrics & liners
Whitford Corporation47 Park Ave. Elverson, PA 19520 (610) 286-3500Fax: (610) 286-3510E-mail: [email protected] Founded: 1969.Privately Held.
Key Personnel:President ����������������������������� Anne S� WillisCOO ����������������������������������������Rich HobbsCFO ������������������������������������� Tom SheehanLab Manager �������������������������� Kurt MecrayPurchasing Manager ����������������Jill Schultz
Factories:Elverson, PA 19520
Material and Ingredients: Accelera-tors-curing agents, Adhesion promoters, Adhesives, cements, bonding agents, Coated fabrics & coatings, Finishes, paints, coatings, Finishing materials, Lubricants-gener-al, Mold releases, Treated fabrics & liners
Custom or Special Services: Mixing-black, Mixing-colors
ZZeon Chemicals L.P.4111 Bells Ln. Louisville, KY 40211 (502) 775-2000(800) 735-3388 Fax: (502) 775-2055E-mail: [email protected] Founded: 1989.Privately Held.
Key Personnel:CEO/President, Vice President/General
Manager, Elastomers �������� Bob BarlowVP, Sales & Marketing ��������������� Brian CailVP, Corporate Technology ���Mike RecchioDirector of International Sales ���� Tony LuftDirector of Sales �����������������Eric SaundersBusiness Manager, Zetpol
HNBR ������������������������David RosbottomBusiness Manager,
Hydrin ECO ����������������������������Zhiyi BaoBusiness Manager,
Nipol NBR �������������������������� Josh KelleyBusiness Manager, HyTemp
ACM ������������������������������Aaron BresslerAutomotive Industry Manager ���� Jim EddyAccount Manager�����������������Danny CarrollAccount Manager��������������������� Darrin RoeAccount Manager���������������� Joseph FieldsAccount Manager��������������Ward Campbell
Factories:4100 Bells Ln�Louisville, KY 40211
11235 Choate Rd�Pasadena, TX 775071301 W� 7th St�Hattiesburg, MS 39401
Material and Ingredients: Accelera-tors-curing agents, Acrylonitrile-buta-diene rubber (NBR), Acrylonitrile-buta-diene rubber (NBR)-carbon black masterbatches, Acrylonitrile-butadiene rubber (NBR)-latex, emulsion, Acrylonitrile-butadiene rubber (NBR)-solid, dry, bales, crumb, slabs, Adhesives, cements, bonding agents, Compounds-polymers, Curing agents-accelerators, Elastomers (other), Epichlorohydrin rubbers (CO & ECO), Latexes, Modifiers, polymeriza-tion, Nitrile Hydrogenated (HNBR), Nitrile rubber, Plastics, Polyacrylate (PA), Polyisoprene rubber (synthetic polisoprene) (IR), Resins-tack, Rubber (General-Not Classified), Rubber (General-Not Classified)-carbon black masterbatches (with or without oil), Rubber (General-Not Classi-fied)-crumb rubber, Rubber (General-Not Classified)-ground rubber, Styrene-butadiene rubber (SBR), Styrene-butadiene rubber (SBR)-synthetic rubber resins (high styrene, vinyl, other), Synthetic polyac-rylate rubber (ACM), Thermoplastic elastomers, Thermoplastic elastomers-thermoplastic vulcaniza-tes, Vulcanizing & curing agents
Zinc Oxide LLC600 Printwood Dr. Dickson, TN 37055 (615) 446-8791Fax: (615) 446-8789E-mail: [email protected] Founded: 2013.Privately Held.
Key Personnel:Vice President ����������������������������� Ed Smith
Material and Ingredients: Zinc Oxide
Custom or Special Services: Pelletizing
Zochem, Inc.1 Tilbury Ct. P.O. Box 1120 Brampton, ON L6V 2L8 (905) 453-4100(800) 324-1806 Fax: (905) 453-2920E-mail: [email protected] Founded: 1933.
Key Personnel:General Manager ������������� Joshua BelczykInside Sales
Coordinator ������������� Jawanda Jaspreet
Material and Ingredients: Accelera-tors-curing agents, Accelerators-gen-eral, Accelerators-vulcanization, Pigments, Stabilizers, heat, UV light absorbers, Vulcanizing & curing agents, Zinc Oxide
246 RPN Rubber Directory and Buyer’s Guide246 RPN Rubber Directory and Buyer’s GuideVystar Corporation2484 Briarcliff Rd NE, #22 Atlanta, GA 30329 (866) 674-5238E-mail: [email protected] Founded: 2001.Publicly Held.
Material and Ingredients: Natural rubber (NR)-latex
W
Wacker Chemical Corporation3301 Sutton Rd. Adrian, MI 49221-9397 (517) 264-8500(888) 922-5374 Fax: (517) 264-8246E-mail: [email protected] Founded: 1914.Publicly Held.
Key Personnel: Vice President ��������������������� Axel SchmidtVice President, Finance ����Tobias BrandisDirector-SILMIXR California � Kim LiberatoDirector-SilmixR Ohio ��������� Silje Gridsvag
Material and Ingredients: Adhesion promoters, Compounds-polymers, Compounds-silicone, Crosslinking agents, Elastomers (other), Extenders & fillers, Fluorosilicone rubbers, Heat transfer oils, Mold releases, Reinforcing agents-general, Resins-general, Sealants & encapsulants, Silane coupling agents, Silica, Silicone rubber (Q), Silicone rubber (Q)-bases, Silicone rubber (Q)-compounds, Silicone rubber (Q)-gums, Silicone rubber (Q)-liquids, Thermoplastic elastomers, Thermoplastic elastomers-polyamide blocks
Warwick Mills, Inc.301 Turnpike Rd. New Ipswich, NH 03071 (603) 291-1000(603) 878-1565 Fax: (603) 878-4306E-mail: [email protected] Founded: 1888.Privately Held.
Key Personnel: President, Chief
Engineer ��������������� Charles A� HowlandVice President, Business
Development �����������������Jenny Houston
Markets Served: Aerospace, Apparel, Automation, Automotive, Automotive aftermarket, Automotive original equipment, Aviation/aerospace, Industrial, Irrigation, Medical, Military, Mining, Oil and gas, Safety, Sport/hobby, Textile�
Machinery Used: Calenders, Coaters, Cutters-Sonic, Cutting, Cutting-Slitter Rewinders, Cutting-Sonic, Laminators, Spreaders�
Products: Safety items, Textiles�
Material and Ingredients: Coated fabrics & coatings, Processing aids, Textiles & fabrics, Treated fabrics & liners
Wego Chemical & Mineral Corporation
239 Great Neck Rd. Great Neck, NY 11021 (516) 487-3510Fax: (516) 487-3794E-mail: [email protected] Founded: 1978.Privately Held.
Material and Ingredients: Coloring agents-internal/pigments, Com-pounds-chemical, Dessicants, Pigments, Resins-general, Silica gels, Stearic acids, Titanium dioxide, UV light absorbers, Zinc Oxide
Weir Minerals Linatex3459 South 700 W. Salt Lake City, Utah 84119 (801) 574-2100Fax: (801) 261-5587E-mail: [email protected]
Key Personnel:Marketing Communications
Manager ����������������������������Lori Masters
Material and Ingredients: Com-pounds-polymers, Latexes, Natural rubber (NR)-latex, Natural rubber (NR)-other, Nitrile rubber, Polyurethane rubber
Western Reserve Chemical Corporation
4837 Darrow Rd. Stow, OH 44224 (330) 650-2244(800) 321-2676 Fax: (330) 650-2255E-mail: [email protected] Founded: 1976.Privately Held.
Key Personnel:President ��������������������Ronald F� AndersonVice President, Business
Development ��������������������������Tony HallCustomer Service
Manager ��������������������Maria BaughmanPurchasing
Manager ��������� Betsy Fackelman SmithRegional Sales Manager ����������Dave KellyRegional Sales Manager ���������Doug Ruch
Material and Ingredients: Accelera-tors-curing agents, Accelerators-vul-canization, Antiblocking agents, Antioxidants, antiozonants, Antistatic agents, Blowing agents, Com-pounds-latex & specialty, Crosslinking agents, Cure activators, Curing agents-accelerators, Curing agents-peroxides, Curing agents-res-ins, Curing agents-sulfur, Dessicants, Dispersing agents, Dispersions-chem-ical, Dispersions-latex, Disper-sions-polymeric, Emulsifiers-latex, Emulsifiers-polymerization, Extenders & fillers, Homogenizing agents, Latex chemicals-general, Latex chemi-cals-stabilizers & thickeners, Lubricants-internal, Magnesium oxide, Natural rubber (NR)-dry (bale, crumb), Peptizers, Peroxides, Plasticizers & softeners, Processing aids, Resins-adhesion, Resins-reinforce-ment, Resins-tack, Retarders-flame, Retarders-vulcanization, Rubber (General-Not Classified), Rubber (General-Not Classified)-ground rubber, Stearic acids, Styrene-butadi-ene rubber (SBR), Styrene-butadiene rubber (SBR)-synthetic rubber resins (high styrene, vinyl, other), Surfactants, UV light absorbers,
Vulcanizing & curing agents, Waxes, Zinc Oxide
Westwood Plastics, Inc.1880 Broken Lance Ln. Rockwall, TX 75032 (972) 840-2424(800) 972-6855 Fax: (972) 840-2525E-mail: [email protected] Founded: 1999.Privately Held.
Key Personnel:President �����������������������������Dan BrecheenInside Sales �������������������� Karen Brecheen
Material and Ingredients: Batch inclusion bags, Film & sheet, Release papers, Treated fabrics & liners
Whitford Corporation47 Park Ave. Elverson, PA 19520 (610) 286-3500Fax: (610) 286-3510E-mail: [email protected] Founded: 1969.Privately Held.
Key Personnel:President ����������������������������� Anne S� WillisCOO ����������������������������������������Rich HobbsCFO ������������������������������������� Tom SheehanLab Manager �������������������������� Kurt MecrayPurchasing Manager ����������������Jill Schultz
Factories:Elverson, PA 19520
Material and Ingredients: Accelera-tors-curing agents, Adhesion promoters, Adhesives, cements, bonding agents, Coated fabrics & coatings, Finishes, paints, coatings, Finishing materials, Lubricants-gener-al, Mold releases, Treated fabrics & liners
Custom or Special Services: Mixing-black, Mixing-colors
ZZeon Chemicals L.P.4111 Bells Ln. Louisville, KY 40211 (502) 775-2000(800) 735-3388 Fax: (502) 775-2055E-mail: [email protected] Founded: 1989.Privately Held.
Key Personnel:CEO/President, Vice President/General
Manager, Elastomers �������� Bob BarlowVP, Sales & Marketing ��������������� Brian CailVP, Corporate Technology ���Mike RecchioDirector of International Sales ���� Tony LuftDirector of Sales �����������������Eric SaundersBusiness Manager, Zetpol
HNBR ������������������������David RosbottomBusiness Manager,
Hydrin ECO ����������������������������Zhiyi BaoBusiness Manager,
Nipol NBR �������������������������� Josh KelleyBusiness Manager, HyTemp
ACM ������������������������������Aaron BresslerAutomotive Industry Manager ���� Jim EddyAccount Manager�����������������Danny CarrollAccount Manager��������������������� Darrin RoeAccount Manager���������������� Joseph FieldsAccount Manager��������������Ward Campbell
Factories:4100 Bells Ln�Louisville, KY 40211
11235 Choate Rd�Pasadena, TX 775071301 W� 7th St�Hattiesburg, MS 39401
Material and Ingredients: Accelera-tors-curing agents, Acrylonitrile-buta-diene rubber (NBR), Acrylonitrile-buta-diene rubber (NBR)-carbon black masterbatches, Acrylonitrile-butadiene rubber (NBR)-latex, emulsion, Acrylonitrile-butadiene rubber (NBR)-solid, dry, bales, crumb, slabs, Adhesives, cements, bonding agents, Compounds-polymers, Curing agents-accelerators, Elastomers (other), Epichlorohydrin rubbers (CO & ECO), Latexes, Modifiers, polymeriza-tion, Nitrile Hydrogenated (HNBR), Nitrile rubber, Plastics, Polyacrylate (PA), Polyisoprene rubber (synthetic polisoprene) (IR), Resins-tack, Rubber (General-Not Classified), Rubber (General-Not Classified)-carbon black masterbatches (with or without oil), Rubber (General-Not Classi-fied)-crumb rubber, Rubber (General-Not Classified)-ground rubber, Styrene-butadiene rubber (SBR), Styrene-butadiene rubber (SBR)-synthetic rubber resins (high styrene, vinyl, other), Synthetic polyac-rylate rubber (ACM), Thermoplastic elastomers, Thermoplastic elastomers-thermoplastic vulcaniza-tes, Vulcanizing & curing agents
Zinc Oxide LLC600 Printwood Dr. Dickson, TN 37055 (615) 446-8791Fax: (615) 446-8789E-mail: [email protected] Founded: 2013.Privately Held.
Key Personnel:Vice President ����������������������������� Ed Smith
Material and Ingredients: Zinc Oxide
Custom or Special Services: Pelletizing
Zochem, Inc.1 Tilbury Ct. P.O. Box 1120 Brampton, ON L6V 2L8 (905) 453-4100(800) 324-1806 Fax: (905) 453-2920E-mail: [email protected] Founded: 1933.
Key Personnel:General Manager ������������� Joshua BelczykInside Sales
Coordinator ������������� Jawanda Jaspreet
Material and Ingredients: Accelera-tors-curing agents, Accelerators-gen-eral, Accelerators-vulcanization, Pigments, Stabilizers, heat, UV light absorbers, Vulcanizing & curing agents, Zinc Oxide
AD SPACE CLOSING:November 5, 2019
Rubber Directory & Buyers Guide Full Page Print Specs
Fractional sizes also available, contact your sales representative for details.
rubbernews.com
2020 Rubber Directory & Buyers Guide
ContactBrent Weaver, sales manager330-865-6119 or [email protected]
Pete McNeil, display sales representative330-865-6109 or [email protected]
The Online 2019 Rubber Directory & Buyers GuidePowered by RubberNews.comThe web version of the Rubber & Plastics News 2019 Rubber Directory & Buyers Guide is extremely comprehensive and incredibly user-friendly providing outstanding web-based advertising opportunities to reach your customers when they are online looking for your products and services.
Take advantage of advertising in the searchable product category index sections where your customers are looking for products or services you provide:l Suppliers of raw materials and ingredients for use in processing rubber into finished productsl A comprehensive listing of the various custom or special services available to the rubber industryl An alphabetical listing of the wide variety of machinery and equipment handled by suppliersl An alphabetical listing of laboratory and testing equipment from aging apparatus to X-ray inspection machinesl An alphabetical listing of the types of services offered by consultants and testing organizations, including services such as financial, management and technical
Added Value:l Web-based ads are linked to advertiser's websitel Advertiser's company name and website will be at the top of category searches for product or servicesl Advertiser's receive 300x250 space next to their exclusive listing with a link to their website
Leaderboard Ad Position* Large Rectangle Ad Position*728x90 pixels 300x250 pixels
By product category
*Web-based ads rotate per view
By product category
*Web-based ads rotate per view
Per supplier product category index selected Per supplier product category index selected
$2,249 per year $1,687 per year
$3,374 for 2 Leaderboard ads $1,576 for 2 Vertical Rectangle ads
$1,350 each for 3 or more Leaderboard ads $958 each for 3 or more Vertical Rectangle ads
Effective Jan. 1, 2019
Product Category Selectionsl Consultants and Testing Servicesl Custom or Special Servicesl Laboratory and Testing Equipmentl Machinery and Equipmentl Material and Ingredients
File Size 728x90, 300x250 --- initial 40K, gif, animated gif or jpg.
If providing animated ads, please send a single frame of the most pertinent information from the ad to serve to users who do not have Flash.
rubbernews.com
Online 2019 Rubber Directory & Buyers Guide
ContactBrent Weaver, sales manager330-865-6119 or [email protected]
Pete McNeil, display sales representative330-865-6109 or [email protected]
Maximize your company message with an ad in the Rubber & Plastics News 2020 Industry CalendarThe 2020 Rubber Industry Calendar will be poly-bagged with the December 16 issue of RPN and mailed to over 12,000 subscribers throughout North America, the largest circulation in the industry. Each month will feature just one sponsor, so your message or ad will be extremely visible during an entire month - or more with multiple sponsorships!The 2020 Rubber Industry Calendar will include important industry dates for conferences, events, meetings and holidays. Have a compa-ny anniversary or important event in a specific month? Sponsors can also indicate those dates on the calendar in the months they sponsor.2019 sponsors will also have right of first refusal for future RPN cal-endars – so be sure to take advantage of this brand new marketing opportunity to reach RPN’s vast manufacturing audience.
SpecsStandard/JR Page 4C Ad (7.5” width x 10” depth image area)
Space Reservation Deadline is October 23
Contact your sales representative for available months/rates.
ContactBrent Weaversales manager330-865-6119 or [email protected]
Pete McNeildisplay sales representative330-865-6109 or [email protected]
SUNDAY MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY
Call or email your sales representative to reserve your advertising space.
Brent WeaverSales [email protected]
Pete McNeilSales [email protected]
Brooke StenderClassified/Mold Mart [email protected]
28
4
11
18
25
29
5
12
19
26
30
6
13
20
27
31
7
14
21
28
1
8
15
22
1
2
9
16
23
2
3
10
17
24
3
FEBRUARY 2018
MD&M West ShowAnaheim, Calif.
Tire Technology Expo
Deutsche Messe, Hannover, Germany
Tire Technology Expo
Deutsche Messe, Hannover, Germany
Tire Technology Expo
Deutsche Messe, Hannover, Germany
MD&M West ShowAnaheim, Calif.
MD&M West ShowAnaheim, Calif.
Valentine’s Day
President’s Day
S M T W T F S 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
JANUARY 2018 S M T W T F S 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
MARCH 2018
rubbernews.com
2020 Industry Calendar
2018 Rubber Industry Calendar
RubberNews.comRubberNews.com
Announce New Talent in Rubber & Plastics News
People on the Move Options
Text and Photol Ad will run on special People on the Move page in Rubber & Plastics News print and digital editionsl Approximately 100 words of text and one head shot photol Last name will be highlighted with industry headerl 10% discount for multiple listings purchased at once Rate$205 net
Premium Placement Optionl Ad will run in Premier People on the Move page in Rubber & Plastics News print and digital editionsl 10% discount for multiple listings purchased at onceRate$255 net
Rubber & Plastics News is the perfect place to announce all of your promotions, appointments and new hires to the rubber industry! With People on the Move, you have the opportunity to place your listing with a photo and 100 words of text describing your achievement in Rubber & Plastics News in the next available issue.
Secure your People on the Move space today!
ContactBrent Weaversales manager330-865-6119 or [email protected]
The Rubber Industry ’s International Newspaper $99 per year. $4.50 per copyJune 11, 2018
Crain Communications Inc
Entire contents © 2017by Crain Communications Inc.
Entire contents © 2018by Crain Communications Inc.
Registration Open 2018 ITEC TIRE MANUFACTURING SEPT. 11-13, 2018 AKRON, OH, USA ITEC-TIRESHOW.COM
Autonomous vehicles pushing the industry toward new technologies
Cars long have been considered a symbol of freedom, and soon that freedom will extend to the driver.
A future where electric-powered, autonomous vehicles are the norm has forced the automotive industry into rapid change. Suppliers already are re-aligning themselves to prepare for these game changing technologies, and some say they may begin to manifest within the next 10 years.
But there certainly is caution among industry stakehold-ers, with many hurdles to overcome before this dream world of self-driving cars becomes a reality. For starters, less than 1 percent of the global fleet consists of electric vehicles, which are basically a prerequisite to self-driving cars.
“Electric vehicles and autonomous vehicles go hand-in-hand,” said Shashank Modi, research engineer at the Center for Automotive Re-search. “Electric platforms enable a lot of au-tonomous features because you already have those wiring harnesses in place.”
Hurdles aside, Matt Chapman—vice president global marketing and E-mobili-ty, automotive sales, at Freudenberg-NOK Sealing Technologies—said the adoption of electric vehicles is inevitable. CAR
Group, which studies the automotive industry, outlined that fully autonomous vehicles will account for less than 4 percent of new sales by 2030, increasing to more than 50 percent by 2040. As for EVs, those will only comprise 8 percent of the market by 2030, but will grow rapidly beyond that.
Tesla is the best-known brand currently on the EV mar-ket, but OEMs like Ford, General Motors, Honda, Volvo and Daimler A.G. have funneled billions toward new elec-tric models to join the fray in the coming years.
“It’s got to be one of the most substantial technology shifts in the last 20 years,” said Chris Couch, vice president of innovation and product groups at Cooper Standard Auto-motive Inc., which produces such rubber products as seals
and hoses.“I think it’s a great time to be in our business because it’s a chance to bring some material sci-
ence to this problem. There’s huge opportunity, and that is to make lighter parts, which you need for EVs because every ounce counts in terms of the vehicle range, and it’s got to be
quiet. Those two things can be contra-dictory with the old materials we used to use. We need new and better materi-als to achieve those.”
Changing the game
This Game Changing Technology spe-cial report is a joint project between Rubber & Plastics News and sister Crain Communications publications Tire Busi-ness and European Rubber Journal.
It takes an in-depth look at how new technologies will affect the tire and rubber industries, beginning with the many hurdles autonomous and electric vehicles face before they be-come prevalent. Page 9.
Regulations still need to be out-
lined and developed fully for these emerging technologies. Page 10.
Tire industry stakeholders share their views on autonomous and elec-tric vehicles, and what the industry is doing to prepare. Pages 11-13.
Freudenberg-NOK heat shields help protect electric batteries. Page 14.
ContiTech A.G.’s global Fluid Sys-tems business shows how digitaliza-tion can be applied throughout the hose industry. Page 16.
A Penn State research team uses 3D printing to improve the cell adhe-sion and strength of a silicone polymer. Page 17.
Industry experts weigh in on the im-pact of these new vehicle technologies. Pages 18-19.
More viewpoints and subsequent re-ports will be included online at www.rubbernews.com.
Pictured above: GM’s autonomous concept car interior.
By Chris SweeneyRubber & Plastics News Staff
AI
MORE INSIDE, ONLINE:See Technology, page 20
Latest round of steel tariffs could lead to retaliation by allies
WASHINGTON—President Trump’s decision to levy tariffs against steel and aluminum imported from Canada, Mexico and the European Union was met with dismay from nearly every sector and promises of retaliation from the affected countries.
Representatives of the tire and auto parts indus-tries expressed grave concerns about the presi-dent’s actions, and even the United Steelworkers union, which generally supports all measures to protect American workers, said steel and alumi-num tariffs against Canada were “unacceptable.”
The USW also has a substantial membership base in Canada.
Trump issued two proclamations May 31, going into effect the next day, ending the suspension of 25 percent tariffs on steel and 10 percent tariffs on aluminum imported from Canada, Mexico and Europe.
The administration originally issued the tariffs March 8 under Section 232 of the Trade Expansion Act, which allows remedial action against imports deemed to present a national security threat.
“Measures are in place to address the impair-ment to the national security threatened by im-ports of steel and aluminum from Argentina, Bra-zil and Australia,” a May 31 White House statement said. “At this time, similar measures are not in place with respect to steel or aluminum imports from Mexico, Canada or the European Union.”
The statement said the Trump administration will continue discussions on trade with Canada, Mexico and Europe, but left no doubt the adminis-tration considers the tariffs necessary.
“The Section 232 steel and aluminum tariffs
By Miles MooreRubber & Plastics News Staff
See Tariffs, page 5
Canadian Prime Minister Justin Trudeau watch-es as President Donald Trump speaks.
Andy SobottaChief Information Security Officer (CISO)Bridgestone Americas
CISO
MOVEMOVEONTHEPEOPLE
ADVERTISING
Eric ThomasSenior Technical ConsultantACE Products and Consulting
Senior Technical Consultant
Rubber & Plastics News is the perfect place to announce all of your promotions, appointments and new hires to the rubber industry! With People on the Move, you have the opportunity to place your listing with a photo and 100 words of text describing your achievement in the next available issue of Rubber & Plastics News.
Secure your People on the Move space today! Contact Brent Weaver Sales manager 330-865-6119 or [email protected]
Ravenna OH, May 16, 2018 – ACE Prod-ucts and Consulting is pleased to announce the hiring of Eric Thomas as senior technical consultant. Thomas’ impressive career is long and varied in the rubber industry and includes lead roles at DuPont in the develop-ment of high-performance elastomers. In his new role at ACE, he will be responsible for providing greater returns to clients and cus-tomers and to help the ACE team grow their brand in testing and consulting services to the rubber industry. Erick Sharp, president, and CEO of ACE Products and Consulting, made the announcement.
Thomas’ career includes work as Techni-cal Director for Industrial Electronic Rubber Co., a privately held manufacturer of pre-cision rubber products, where he served in several technical assignments including work with the Fluorocarbon’s IER Division at the time of acquisition in 1985. He then worked to provide technical support and develop-ment for DuPont’s Akron Lab (Stow, OH) in 1987 for Viton® fluoroelastomer and other portfolio elastomers to OEM’s, tier suppliers and sealing product manufacturers serving the automotive, commercial vehicle, off-high-way, and aerospace/aircraft markets. His vast experience also includes work in advanced manufacturing for Kalrez® perfluoroelasto-mer parts serving the electronics, chemical processing, energy, pharmaceutical and aerospace/aircraft markets.
About ACE Products and ConsultingACE Products and Consulting, located in
Northeast Ohio – the rubber capital of the world - is a leader in the rubber and silicone industries. ACE operates a world-class, in-dependent laboratory that provides labora-tory testing, research and development and product development services. ACE also provides consulting expertise and services for new product launches, process improve-ments, supply sourcing and on-site technical support. For more information about ACE call 330-577-4088 or visit the company’s website at www.aceprodcon.com.
NASHVILLE, Tenn. (May 15, 2018) – Bridge-stone Americas, Inc. (Bridgestone) today an-nounced Andy Sobotta has been named Chief Information Security Officer (CISO) for Bridge-stone Americas, effective May 21. Sobotta will be based in Nashville and will report to Stefano Mezzabotta, Chief Information Officer, Bridge-stone Americas, with dotted-line reporting to Chris Karbowiak, Chief Administrative Officer and Chief Risk Officer and Executive Vice Presi-dent, Bridgestone Americas.
In his new role, Sobotta will oversee the protec-tion of the company’s information technology as-sets, ensuring robust IT security architecture, op-erations and compliance throughout the Americas.
Sobotta joins Bridgestone with more than 20 years of experience as an information security executive, including nearly 10 years in the auto-motive industry. He most recently served as Chief Information Security Officer at Sensata Technol-ogies, Inc., after four years as Associate Execu-tive Director of Global Information Security with Procter & Gamble. Sobotta also served as Chief Information Security Officer for Elavon/US Bank and was Chief Information Security Officer for Volkswagen of America.
About Bridgestone Americas, Inc.:Nashville, Tennessee-based Bridgestone
Americas, Inc. (BSAM) is the U.S. subsidiary of Bridgestone Corporation, the world’s largest tire and rubber company. BSAM and its subsidiaries develop, manufacture and market a wide range of Bridgestone, Firestone and associate brand tires to address the needs of a broad range of customers, including consumers, automotive and commercial vehicle original equipment man-ufacturers, and those in the agricultural, forestry and mining industries. The companies are also engaged in retreading operations throughout the Western Hemisphere and produce air springs, roofing materials, and industrial fibers and tex-tiles. The BSAM family of companies also oper-ates the world’s largest chain of automotive tire and service centers. Guided by its One Team, One Planet message, the company is dedicat-ed to achieving a positive environmental impact in all of the communities it calls home. For more company news, visit BridgestoneAmericas.com.
Brad WurstTire Engineering ConsultantSmithers Rapra
Tire Engineering Consultant
(Akron, OH) – May 15, 2018 – Smithers Rapra, a world leader in rubber, plastics and compos-ites testing expertise, announced today the ad-dition of Brad Wurst as Tire Engineering Consul-tant. He brings extensive tire industry expertise to the technical consulting group focused on providing specific guidance and solutions that address clients’ development and quality-relat-ed challenges. Wurst will also help clients in de-veloping a plan of action to implement solutions for their tire design needs.
This hire supports Smithers Rapra’s strategy to continuously expand services to the global tire industry. Smithers is in the midst of an expansion of its Tire & Wheel Testing Laboratory in Raven-na, OH to accommodate a new Flat-Trac CT Plus system. The new machinery allows Smithers to test most passenger car and light truck tires on the market with accurate and repeatable mea-surements of tire force and moment properties under steady-state and dynamic conditions. In addition, Smithers has recently expanded their tire testing capacity at their Suzhou, China Tire and Wheel testing laboratory by 35% and added new testing areas and an event center at its win-ter proving grounds in Brimley, MI.
Wurst has almost 30 years of experience in tire engineering, with expertise in tire development, project planning and management, product per-formance enhancement, and the enhancement of product performance prediction tools. Most recently, he worked as a senior engineer of com-mercial tire development at a major tire manu-facturer where he developed an on-vehicle test to duplicate tire conditions from the field. Wurst holds a Bachelor of Science degree in Mechani-cal Engineering from the University of Akron.
About The Smithers GroupHeadquartered in Akron, Ohio, The Smithers
Group includes Smithers Apex, Smithers Avan-za, Smithers Pira, Smithers Quality Assessments, Smithers Rapra, and Smithers Viscient. Each Smithers Group company provides technolo-gy-based services focused on a defined market. As a group, the diversity of market sectors and technologies provides stability and a platform for long-term growth. By integrating science, technology and business expertise, Smithers’ goal is to add value throughout the lifecycle of our clients’ products, by utilizing testing, consult-ing, information, and compliance services. All Smithers companies are known by their clients as Trusted Providers of Innovative Solutions. For more information, visit www.smithers.com.
MOVEMOVEONTHEPEOPLE
rubbernews.com
People on the Move
Ad Size Image Area Trim Bleed
Tab Spread 108" - 8 Columns x 131/2" 21" x 131/2" 213/4" x 141/2" 22" x 143/4"
Tab 54" - 4 Columns x 131/2" 101/8" x 131/2" 107/8" x 141/2" 111/8" x 143/4"
½ Tab 27" - 4 Columns x 63/4" 101/8" x 63/4" 107/8" x 73/8" 111/8" x 75/8"
Junior Spread 60" - 6 Columns x 10" 153/4" x 10" 153/4" x 101/2" 153/4" x 103/4"
Standard or Junior 30" - 3 Columns x 10" 71/2" x 10" 77/8" x 101/2" 81/8" x 103/4"
Ad Size Image Area
2/3 page (20") 47/8" x 10"
2/3 page (20") 101/8" x 5"
1/2 page (15") 71/2" x 5"
1/2 page (15") 47/8" x 71/2"
1/3 page (10") 25/16" x 10"
1/3 page (10") 47/8" x 5"
1/4 page (71/2") 25/16" x 71/2"
1/4 page (71/2") 71/2" x 21/2"
1/6 page (5") 25/16" x 5"
1/6 page (5") 47/8" x 21/2"
Display Column Widths
1 column 25/16"
2 columns 47/8"
3 columns 71/2"
4 columns 101/8"
Live area Tab Page (54”) Live area 1/2 Tab Pg. (27”) Live area Stnd. Jr. Pg. (30”) Live area 2/3 Page (20”) Live area 2/3 Page (20”)
Live area 1/2 Page (15”) Live area 1/3 Page (10”) Live area 1/4 Page (7½”) Live area 1/6 Page (5”)
Questions? Contact:Scott MerryweatherMedia Services Manager [email protected]
rubbernews.com
Print Specifications
Publisher's Protective ClauseBy issuance of this rate card, Publisher offers, subject to the terms and conditions herein, to accept insertion orders for advertising to be published in Rubber & Plastics News and by their tendering such insertion order the advertiser or agency shall indemnify and hold Publisher, its employees, agents and its subcontractors free and harmless from any expenses, damages and costs (including reason-able attorney fees) resulting in any way from Publisher's compliance with such insertion order (including but not by way of limitation, from claims of libel, violation of privacy, copyright infringement or otherwise) and Publisher shall have full right to settle any such claim and to control any litigation or arbitration as to which it may be a party all at the cost of the agency and the advertiser who shall be deemed joint and several indemnitors and agency warrants that it is authorized to bind, advertiser to such indemnity jointly and sever-ally with agency. Publisher reserves the right in its sole discretion to discontinue publication or circulation of any issue or of the tendered advertising, shall not be liable for any failure to print, publish or circulate all of any portion of an issue or of the tendered advertis-ing, because of labor disputes involving the Publisher, the printer or others, transportation delays or embargoes, errors or omissions of employees or subcontractors, or circumstances beyond its control. Publisher's sole obligation as to any failure or default on its part shall
be limited to a refund of its charges which may have been paid to it, at its option, to publish the tendered advertising in the next available issue. The Publisher reserves the right to reject or omit any advertis-ing for any reason. No advertising will be accepted which simulates Rubber & Plastics News editorial.
Payment TermsContract advertisers are protected for life of annual contract. Adver-tisers are short-rated if within a 12-months period from date of first insertion they do not use amount of space contracted for. Advertisers are rebated if, within a 12-month period from date of first insertion, they use space to warrant lower rate than contracted for. Rebates will expire if not used within six months after they are earned.Invoices are dated as of the issue date in print or first appearance on the online products and are due and payable upon receipt in U.S. funds drawn on a U.S. bank. Publisher looks to the agency and the advertiser jointly and severely liable for the monies due and payable to the Publisher, and the agency warrants by submitting the insertion order that it and the advertiser have accepted this responsibility. Publisher will not be bound by conditions, printed or otherwise, on contracts, order blanks or instructions when such conditions conflict with its policies.
rubbernews.com
Mechanical Requirements & Ad Submission
Printed Web Offset on Coated StockTrim size: 107/8" x 14½"Gutter: ¾"Number of columns: 4Binding method: saddle-stitched
Print Production SpecificationsAll print advertising should be provided as PDFx1a files. For further instructions on how to prepare and upload your digital ad please visit rubberandplasticsnews.sendmyad.com.
Color, Images and FontsFour-color ads must be converted to CMYK. Two-color ads must be produced using the CMYK mode. All PMS or pre-mixed inks require dedicated print units and will be billed at the Matched Color Rate.Please refer to the current rate card for rates. Black and white ads need to be converted to grayscale. All images must be embedded. Image manipulation (resizing, color-mode changes and rotating) should be done in the application the image was generated with before import-ing it into a page make-up program. Image resolution should be at a minimum of 300 dpi.Fonts must be embedded or converted to outlines and must be Post-script Type 1. Reverse lettering in four color ads should be spread with dominate color forming shapes of letters. Thin lines, serifs, small- and medium-size lettering should be restricted to one color only. Maxi-mum density in any one area, all colors, should not exceed 300%.
Crop MarksCrop marks, registration marks and file identification names should not be included in the digital file. This information should be on the proof only.
ProofsAds supplied to Crain without an acceptable color proof will be print-ed to SWOP standards. The printer and/or Publisher cannot be held liable for color complaints when files are submitted without an ac-ceptable color proof. Preferred proofs are Kodak Approval or another
SWOP-approved proof prepared 5-7% heavier than the file to simulate press gains and ink coverage to our web offset press. Color lasers or low quality ink jet prints are not acceptable color guidance.
InsertsSubmit samples of the content to the production department (elec-tronic or hard copy). Also include specified paper stock trimmed to size. This ensures that the insert meets mechanical requirements and postal regulations.
Print ad delivery instructionsUpload print ad material to: https://rubberandplasticsnews.sendmyad.com Email ad material to: [email protected]
For more information regarding technical specifications and shipping instructions, please contact: Scott Merryweather, Media Services Manager 330-865-6104 or [email protected]
Online ad material by email:File names are not to exceed eight characters followed by a three-character extension. One attachment per email. Compress multiple files into SIT or ZIP files. File attachments should not exceed 8MB.
Email to your sales representative:Brent Weaver, sales manager330-865-6119 or [email protected] McNeil, display sales representative330-865-6109 or [email protected]
For more information regarding technical online specifications and shipping instructions please contact:Lori DiFrancesco, advertising sales assistant330-865-6121 or ldifrancesco@crain