Date post: | 14-Jul-2015 |
Category: |
Documents |
Upload: | berny-murville |
View: | 20 times |
Download: | 1 times |
Sealing Arrangements in The Market
Standard Lip Seal Arrangement
Moisture and impuri/es creep under lips of the seal through channels created by corrosion of the sha7
Sealing Arrangements in The Market
Standard Labyrinth Seal Arrangement
Moisture and impuri/es move through the fins of the seal , aided by the centrifugal force of the spinning roller.
Sealing Arrangements in The Market
MegaRoller 4Lip Sealing Arrangement
Lips run on Polyethylene bush which cannot corrode thereby preven/ng moisture and impuri/es from
reaching the bearing
Megaroller Bearing Housing
Belt Friendliness
• In the event of a bearing failure, the HDPE material will not destroy the belt.
• Doesn’t cause a “pizza cuCer” affect.
• Lesser material build-‐up from carry-‐back.
Megaroller Bearing Housing
Bearing ProtecIon • Sealing Arrangement • Eliminates miss-‐Alignment • Concentric design &
balanced Roller • Less VibraIon • Light weight strong
construcIon
Occupational Health And Safety
Very Low Noise Pollu/on
25dB Quieter than
Steel
Guaranteed Lifespan
Min. condi/onal warranty applies
No
Maintenance
Lightweight
40% Lighter than steel
Environmental Friendly
Recyclable Material
Reduced Mass
Reduced Power
ConsumpIon Extended
Life
Reduced Noise
PolluIon
Megaroller Steering Frames
q Megaroller’s unique MulI-‐steer conveyor belt steering frames are Ø the key to effecIve conveyor belt management Ø Designed to reduce movement on the belt and prevent misalignment, Ø Megaroller MulI-‐steer Steering Frames extend the longevity of conveyor belts
and minimize idler damage.
q Main advantages Ø Designed and tested to operate in the hosIle environments Ø Prevents belt misalignment without the need for side guide rollers Ø Require no maintenance as the mulIple pivot mechanism is greased and sealed for life Ø Made from high quality materials for a long lifespan Ø Reduces damage to conveyor belts caused by misalignment Ø Ensure even, centred distribuIon of weight on the belt Ø Prevents structural damage to rollers Ø Prevents material spillage