HYDRAULIC AND MANUAL TOOLS HYDRAULIC TOOLS Spec-01141 C EQUIPMENT PROTECTION SUBJECT TO CHANGE WITHOUT NOTICE POWER AND GROUNDING CONNECTIVITY 1 POWER AND GROUNDING CONNECTIVITY HYDRAULIC AND MANUAL TOOLS HYDRAULIC TOOLS HYDRAULIC FLEXIBLE/NON-FLEXIBLE BUSBAR WORK CENTER, 115 V FEATURES • Mobile workbench for cutting, bending and punching copper busbars or ERIFLEX FLEXIBAR • Includes hydraulic punch, hydraulic busbar cutter, hydraulic ERIFLEX FLEXIBAR shearing tool, hydraulic bender with programmable angle controller, hydraulic pump with foot controller, calibrated gauge and stop, and two ejection stops • Large stainless steel work surface with collapsible extensions support large copper busbars or ERIFLEX FLEXIBAR • Built-in storage cabinet with lockable door and four drawers for storing accessories • Four-way directional valve makes it possible to quickly switch between tools without disconnecting and reconnecting tools • Includes an additional hydraulic hose and 6 m (19.69’) power cord to connect an additional hydraulic tool • Scrap storage bins under work surface • Forklift rail, locking directional wheels and built-in handles provide easy mobility • Protected by an electrical panel control with circuit breaker : / $ + Catalog Number Height H (in.) Length L (in.) Width W (in.) A (in.) Power Supply Voltage (V) Unit Weight (lb.) Qty. HYDRWC115V 57.68 57.68 30.32 54.33 115 857 1
Transcript
Hydraulic and Manual Tools Hydraulic Tools
Spec-01141 CEQUIPMENT PROTECTIONSUBJECT TO CHANGE WITHOUT NOTICEPower and GroundinG connecTiviTy1
Spec-01141c763.422.2211763.422.2600
Power and GroundinG connecTiviTyHydraulic and Manual ToolsHydraulic Tools
Hydraulic Flexible/non-Flexible busbar work cenTer, 115 v
FeaTures• Mobile workbench for cutting, bending and punching copper
busbars or ERIFLEX FLEXIBAR• Includes hydraulic punch, hydraulic busbar cutter, hydraulic
ERIFLEX FLEXIBAR shearing tool, hydraulic bender with programmable angle controller, hydraulic pump with foot controller, calibrated gauge and stop, and two ejection stops
• Large stainless steel work surface with collapsible extensions support large copper busbars or ERIFLEX FLEXIBAR
• Built-in storage cabinet with lockable door and four drawers for storing accessories
• Four-way directional valve makes it possible to quickly switch between tools without disconnecting and reconnecting tools
• Includes an additional hydraulic hose and 6 m (19.69’) power cord to connect an additional hydraulic tool
• Scrap storage bins under work surface• Forklift rail, locking directional wheels and built-in handles
provide easy mobility• Protected by an electrical panel control with circuit breaker
Catalog Number Height H (in.)
Length L (in.)
Width W (in.) A (in.) Power Supply
Voltage (V) Unit Weight (lb.) Qty.
HYDRWC115V 57.68 57.68 30.32 54.33 115 857 1
Hydraulic and Manual Tools Hydraulic Tools
Spec-01141 CPH763.422.2211••FAX763.422.2600••PentAirProtect.comEQUIPMENT PROTECTION Power and GroundinG connecTiviTy 2
Hydraulic Flexible/non-Flexible busbar bender
FeaTures• Works with copper or aluminum busbar and ERIFLEX FLEXIBAR• Multi-function tool creates “V” or “Z” bends and straightens
busbar for corrections• Removable top plate allows for multiple bends on a busbar• Bottom plate is etched to indicate a 90° bend• Includes steel bar supports for bending busbar when tool is
not fixed to the Hydraulic ERIFLEX FLEXIBAR and Busbar Work Center
• RoHS compliant
Catalog Number Busbar Width (in.) Busbar Thickness (in.)
Bending Angle
Bending Radius (in.)
Depth D (in.)
Height H (in.)
Width W (in.)
Unit Weight(lb.) Qty.
HYDRBBBEN 8 Max 0.50 Max 100° Max 0.50 19.69 10.28 9.06 112.44 1
Spec-01141 CEQUIPMENT PROTECTIONSUBJECT TO CHANGE WITHOUT NOTICEPower and GroundinG connecTiviTy3
Hydraulic Flexible/non-Flexible busbar PuncHer
FeaTures• Works with copper or aluminum busbar and ERIFLEX FLEXIBAR• Punches flat and clean hole edges• Punch pip to adjust the hole position• Quick setup with interchangeable punch and die system• Large range of round and oval punches and dies available• Can be tilted at a 45° angle for easier punching of formed busbar• Calibrated side and depth gauge and stop• Strong mechanical assembly• RoHS compliant• operatingPressure:10,000psi
Catalog Number BusbarThickness (in.)
Depth D (in.)
Height H (in.)
Width W (in.) A (in.) Unit Weight
(lb.) Qty.
HYDRBBPUN 0.50 Max 12.00 18.50 4.72 5.12 119.05 1
Hydraulic and Manual Tools Hydraulic Tools
Spec-01141 CPH763.422.2211••FAX763.422.2600••PentAirProtect.comEQUIPMENT PROTECTION Power and GroundinG connecTiviTy 4
Hydraulic busbar cuTTer
FeaTures• Works with copper or aluminum busbar• Produces a flat and clean cut edge• Clear plastic shields allow for visual inspection of cutting position• Strong mechanical assembly• Replacement blade available• Easy access for blade maintenance• RoHS compliant
Catalog Number BusbarWidth (in.)
BusbarThickness (in.)
Depth D (in.)
Height H (in.)
Width W (in.)
Unit Weight(lb.) Qty.
HYDRBBCUT 5.00 Max 0.50 Max 9.45 15.55 11.26 90.39 1
Hydraulic Busbar Cutter• Provides support for ERIFLEX FLEXIBAR or busbar while using
hydraulic cutting tools• Includes calibrated end stop• RoHS compliant
Catalog Number Height H (in.)
Length L (in.)
Width W (in.)
UnitWeight (lb.) Qty.
HFSTR 5.04 39.37 11.22 22 1
Hydraulic and Manual Tools Hydraulic Tools
Spec-01141 CPH763.422.2211••FAX763.422.2600••PentAirProtect.comEQUIPMENT PROTECTION Power and GroundinG connecTiviTy 6
Hydraulic eriFlex Flexibar sHearinG Tool
FeaTures• Cuts ERIFLEX FLEXIBAR quickly and accurately without burrs or deformation• Cuts through the insulation without damaging it• Works with all sizes of ERIFLEX FLEXIBAR• Clear plastic shields allow for visual inspection of cutting position• Strong mechanical assembly• Replacement blade available• RoHS compliant
Catalog Number Depth D (in.)
Height H (in.)
Width W (in.)
Unit Weight (lb.) Qty.
HYDRFLEXST 9.45 13.43 11.02 75 1
Do not use to cut solid busbar.
HFsT-b eriFlex Flexibar sHearinG Tool Guide
FeaTures• AttachestotheHydrauliceriFLeXFLeXiBArShearingtool• Use to align ERIFLEX FLEXIBAR with the center of the shearing
tool blade• Increases the life of the shearing tool blade• Works with all sizes of ERIFLEX FLEXIBAR• RoHS compliant
Hydraulic and Manual Tools Bd crimP and drill Tool
Spec-01141 CEQUIPMENT PROTECTIONSUBJECT TO CHANGE WITHOUT NOTICEPower and GroundinG connecTiviTy11
Bd criMP and drill Tool
bd criMP and drill ToolFeaTures• For crimping and drilling of braid terminals• UsewithFrcBFlatBraidincoil,PlaincopperandFtcBFlat
Braidincoil,tinnedcopper• Includes guide and drill bit
Catalog Number Cross Section Drill Bit Diameter Screw Diameter Unit Weight (lb.) Qty.
BD16 31.57 kcmil 6.5 mm M6 1.44 1
BD168 31.57 kcmil 8.5 mm M8 1.44 1
BD25 49.30 kcmil 11.0 mm M10 1.49 1
BD50 98.68 kcmil 12.5 mm M12 1.57 1
Hydraulic and Manual Tools eriFleX FleXiBar Folding Tools
Spec-01141 CPH763.422.2211••FAX763.422.2600••PentAirProtect.comEQUIPMENT PROTECTION Power and GroundinG connecTiviTy 12
eriFleX FleXiBar Folding Tools
MFF eriFlex Flexibar FoldinG Tool sTarTer kiTFeaTures• Kit includes folding tool, fixed vice, rail and clamps• Folds all sizes of ERIFLEX FLEXIBAR without damaging the
insulation• Kit allows for L-shape and Z-shape folds• Additional folding tool components available for making U-shape
folds and folding long pieces of ERIFLEX FLEXIBAR• Easy to reproduce many shapes and sizes• Significantly reduce ERIFLEX FLEXIBAR scrap• Limits heavy ERIFLEX FLEXIBAR handling• Quick and easy setup• toolcanbeeasilytransportedtothejobsiteorremainfixedina
workshop
Catalog Number Height (in.) Length (in.) Width (in.) Unit Weight (lb.) Qty.
MFF 12.00 23.62 12.00 44.00 1
MFFu eriFlex Flexibar FoldinG Tool u-sHaPeFeaTures• For use with folding tool starter kit to create U-shape folds• Intended for use with ERIFLEX FLEXIBAR
sPeciFicaTions• material:Steel
Catalog Number Height (in.) Length (in.) Width (in.) Unit Weight (lb.) Qty.
MFFU 8.07 13.98 12.00 19.80 1
MFFv eriFlex Flexibar FoldinG Tool Fixed viceFeaTures• Attaches to folding tool rail to provide support for long ERIFLEX
FLEXIBAR
sPeciFicaTions• material:Steel
Catalog Number Height (in.) Length (in.) Width (in.) Unit Weight (lb.) Qty.
Spec-01141 CPH763.422.2211••FAX763.422.2600••PentAirProtect.comEQUIPMENT PROTECTION Power and GroundinG connecTiviTy 16
MdrcPT-2 Manual din rail cuTTinG and PuncHinG ToolFeaTures• PunchesslotsandcutsDinrailwithoutburrsordeformation• Punches horizontal and vertical slots• WorkswithfivedifferenttypesofDinrailandm6threadedrod• Includes ruler, guide and end stops• RoHS compliant
sPeciFicaTions• material:Aluminum,Steel
Catalog Number Slot Size (in.) Depth (in.) Height (in.) Length (in.) Unit Weight (lb.) Qty.
MDRCPT2 0.26 x 0.37 6.50 7.87 3.94 28.66 1
Horizontal slots must be punched a minimum of 8 mm (0.315 in.) from the edge of the DIN rail. Vertical slots must be punched a minimum of 12 mm (0.472 in.) from the edge of the DIN rail.
MFbT-2 eriFlex Flexibar Manual bendinG ToolFeaTures• Allows the user to bend ERIFLEX FLEXIBAR into custom shapes
for an efficient installation• Easy-to-use tool bends all sizes of ERIFLEX FLEXIBAR quickly
without damage to the insulation• Long handle to apply force during ERIFLEX FLEXIBAR bending up
to 10x120x1/12x100x1• twobendingradiuses:4mmand8mm(0.16and0.32)• Allows for adjustment of the bending angle for repetitive bending• Robust blue aluminum base with three fixing points• Adjustable length setting for ERIFLEX FLEXIBAR• Quick ERIFLEX FLEXIBAR locking system with no tools required• RoHS compliant
sPeciFicaTions• material:Aluminum,Steel
Catalog Number Conductor Width (in.) Bending Radius (in.) Bending Angle Depth (in.) Height (in.) Width (in.) Unit Weight (lb.) Qty.
Spec-01141 CEQUIPMENT PROTECTIONSUBJECT TO CHANGE WITHOUT NOTICEPower and GroundinG connecTiviTy17
MFsHT-2 eriFlex Flexibar Manual sHearinG ToolFeaTures• Cuts ERIFLEX FLEXIBAR quickly and accurately without burrs or
deformation• Cuts through the insulation without damaging it• Maximum ERIFLEX FLEXIBAR shearing 5x32x1• Adjustable abutment for identical and repetitive cuttings• Abutment and indicator allow for easy cutting of 45° chamfers• Elastomer edge near the blade helps to prevent jamming from
