+ All Categories
Home > Documents >  · performance CCTV standards for a fully networked environment. ... Technical Specifications ......

 · performance CCTV standards for a fully networked environment. ... Technical Specifications ......

Date post: 26-Aug-2018
Category:
Upload: docong
View: 217 times
Download: 0 times
Share this document with a friend
2
Enabling customers invested in analog surveillance and security cameras to cost-effectively migrate to an IP-video environment, the Vigilant™ NetStream IP encoders line of products plays an essential role in today’s increasingly digitized IP surveillance systems. NetStream converts the output of analog cameras into high resolution, highly efficient real-time MPEG-4 video and audio streams, and delivers them over the IP network to a network- based recording solution such as the Vigilant NetVR™ to an IP control room solution such as the Vigilant NetView™. Offering one of the industry’s broadest channels-per-chassis range, the NetStream series starts with a single channel, wall- mounted solution, and scales up to 40 channels encoding rack- mounted platform, equipped with redundant fans and power supply modules. The NetStream, together with NetVR, creates a unique, state-of- the-art IP surveillance solution, which complies with today’s high- performance CCTV standards for a fully networked environment. Both are hybrid solutions and fully compatible with all of Vigilant’s line of products. Features Highly efficient H.264 / MPEG-4 video & audio compression Full performance per channel, CIF/4CIF/D1, with up to 25 (PAL) and 30 (NTSC) fps Internal basic video analysis per channel – VMD & signal loss Supports serial communication and IN/OUT digital alarms per channel Wireless LAN support (NetStream 2901) Wall-mounted or blade-based, rack-mounted platforms Power over Ethernet (PoE) Low power consumption NetStream™ Series Powerful Video Surveillance IP Encoders Edge Devices NetStream2901B NetStream 2901 www.vglnt.com NetStream 2312/2912 NetStream 2340/2940 NetStream 2301 NetStream 2302 Key Benefits Retains investment made in analog cameras Leverages existing TCP/IP infrastructure to transmit video streams, with minimal bandwidth overload Improves delivery, identification, and storage of real- time video and audio streams over an IP network Enables ‘Surveillance by exception’ through built-in video analytics Embedded analytics on the edge (NetStream 2900 Series) Advanced tracking algorithms Intuitive web interface for simple analytics configuration Real-time, on-screen display of data tracking and events Intuitive web interface for simple analytics configuration Scales to support unlimited number of channels Seamlessly integrates with the complete Vigilant solutions suite to ensure long-term investment retention
Transcript
Page 1:  · performance CCTV standards for a fully networked environment. ... Technical Specifications ... 12 & 24 Kbp Metrics Dimensions 10.3(W) x 3.8(H) x

Enabling customers invested in analog surveillance and security

cameras to cost-effectively migrate to an IP-video environment,

the Vigilant™ NetStream IP encoders line of products plays an

essential role in today’s increasingly digitized IP surveillance

systems. NetStream converts the output of analog cameras into

high resolution, highly efficient real-time MPEG-4 video and audio

streams, and delivers them over the IP network to a network-

based recording solution such as the Vigilant NetVR™ to an IP

control room solution such as the Vigilant NetView™.

Offering one of the industry’s broadest channels-per-chassis

range, the NetStream series starts with a single channel, wall-

mounted solution, and scales up to 40 channels encoding rack-

mounted platform, equipped with redundant fans and power

supply modules.

The NetStream, together with NetVR, creates a unique, state-of-

the-art IP surveillance solution, which complies with today’s high-

performance CCTV standards for a fully networked environment.

Both are hybrid solutions and fully compatible with all of Vigilant’s

line of products.

Features

Highly efficient H.264 / MPEG-4 video & audio

compression

Full performance per channel, CIF/4CIF/D1, with up to

25 (PAL) and 30 (NTSC) fps

Internal basic video analysis per channel – VMD &

signal loss

Supports serial communication and IN/OUT digital

alarms per channel

Wireless LAN support (NetStream 2901)

Wall-mounted or blade-based, rack-mounted platforms

Power over Ethernet (PoE)

Low power consumption

NetStream™ SeriesPowerful Video Surveillance IP Encoders

Edge Devices

NetStream2901BNetStream 2901

www.vglnt.com

NetStream 2312/2912 NetStream 2340/2940

NetStream 2301 NetStream 2302

Key Benefits Retains investment made in analog cameras

Leverages existing TCP/IP infrastructure to transmit

video streams, with minimal bandwidth overload

Improves delivery, identification, and storage of real-

time video and audio streams over an IP network

Enables ‘Surveillance by exception’ through built-in

video analytics

Embedded analytics on the edge • (NetStream 2900 Series)

Advanced tracking algorithms•

Intuitive web interface for simple analytics configuration•

Real-time, on-screen display of data tracking and events

Intuitive web interface for simple analytics configuration

Scales to support unlimited number of channels

Seamlessly integrates with the complete Vigilant

solutions suite to ensure long-term investment retention

Page 2:  · performance CCTV standards for a fully networked environment. ... Technical Specifications ... 12 & 24 Kbp Metrics Dimensions 10.3(W) x 3.8(H) x

Technical Specifications

NetStream 2901 NetStream 2901B NetStream 2301 NetStream 2302NetStream 2312/2912

NetStream 2340/2940

General Specifications

DescriptionWall-mounted 1 ch.

IP Video Encoder

Wall-mounted, 1 ch. IP Video

Encoder

Wall-mounted, 2 ch. IP Video

Encoder

Rack-mounted, 12 ch. IP Video

Encoder

Rack-mounted, 40 ch. IP Video

EncoderForm factor 1U 4U

Channels 1 1 1 2Up to 12

(4 channels per blade)Up to 40

(4 channels per blade)

Network

Interface Ethernet 10/100 Base-T Ethernet 10/100 Base-T Ethernet 10/100 Base-T per blade

Connector type RJ-45

Protocols Transport: RTP/IP, UDP/IP, TCP/IP, IP multicast. Others: DNS, NTP, HTTP, FTP, and DHCP client. Security SSL-based authenticationVideo Compression

Input 1Vpp into 75 Ohms

Resolution & FR PAL Scalable from QCIF (176x144) to D1 (720x576) up to 25 fps

Resolution & FR NTSC Scalable from QCIF (176x120) to D1 (720x480) up to 30 fps

Compression standard H.264 / MPEG-4 dual codec MPEG-4 ISO/IEC 14496 MPEG-4 (23xx series)/H.264 (29xx) series

Audio Compression

Output 1.43Vpp into 39 KΩ 1Vpp into 75 Ohms

Compression standardITU G.711

(μLaw, aLaw)/PCMTU 722.1 FM quality, 12 & 24 Kbp

Metrics

Dimensions 10.3(W) x 3.8(H) x

14.1(D) cm9.5(W) x 2.6(H) x

10.7(D) cm

11.7 (W) x 35 (H) x

14.1 (D) cm

11.7 (W) x 35 (H) x

14.1 (D) cm

48.2 (W) x 28.6 (H) x

14.4 (D) cm

48.2 (W) x 28.6 (H) x

17.7 (D) cmTemperature range (Operating)

0 – 60 ºC (32 – 140 ºF)

0 – 50 ºC (32 – 122 ºF)

0°C ~ 50°C (32°F ~ 122°F)

Humidity (Non condensing)

85% 95%

Other

Serial port RS-485/232C RS 232C

Power over Ethernet (PoE) Standard Optional

Certifications FCC Part 15, CE, UL

Ordering InformationModel Part# Description

NetStream 2901 710-06301 D1/Full Rate, dual stream; 1 channel IP video Encoder (Wall-mounted); Analytics on the edge

NetStream 2901B 710-06301 D1/Full Rate, dual stream; 1 channel IP video Encoder (Wall-mounted); Analytics on the edge

NetStream 2301 700-06203 D1/Full Rate, 1 channel video Encoder (Wall-mounted)

NetStream 2302 700-06202 D1/Full Rate, 2 channels IP video Encoder (Wall-mounted)

NetStream 2312-4/-8/-12 700-06242/43/44 12 Channels Video Encoder Chassis (19’’ Rack-mounted); Supports up to 3 NetStream 2304H blades

NetStream 2304H 700-06205 D1/Full Rate; 4 Channels Blade Module for NetStream 2312

NetStream 2912-4/-8/-12 12 Channels Video Encoder Chassis (19’’ Rack-mounted); Supports up to 3 NetStream 2904H blades

NetStream 2904H D1/Full Rate; 4 Channels Blade Module for NetStream 2912

NetStream 2340-16/-24/-32/-40 700-06240/45/46/47 40 Channels Video Encoder Chassis (19’’ Rack-mounted); Supports up to 10 NetStream 2304R blades

NetStream 2340R 700-06204 D1/Full Rate, 4 Channels Blade Module for NetStream 2340

NetStream 2940-16/-24/-32/-40 40 Channels Video Encoder Chassis (19’’ Rack-mounted); Supports up to 10 NetStream 2904R blades

NetStream 2940R D1/Full Rate, 4 Channels Blade Module for NetStream 2940

International Office

Tel Aviv Israel

Tel: +972-3-649-1110

Fax: +972-3-648-8849

e-mail: [email protected]

North America Office

Mansfield MA USA

Tel: 1-800-708-0169

Fax: 1-866-580-0160

e-mail: [email protected]

UK Office

Middlesex UK

Tel: +44-1932-73-8780

Fax: +44-1932-73-8781

e-mail: [email protected]

APAC Office

Singapore

Tel: +65 62243112

Fax:+65 62205848

e-mail: [email protected] over Converged Networks

Notice: The information and/or data in this document are confidential in nature and may contain trade secrets and/or privileged confidential technical,

commercial or financial information. Such information and/or data are copyrighted to Vigilant Technology Ltd. and should be used only for evaluation

purposes. It should not be copied or distributed without written permission of Vigilant Technology Ltd. All denoted product names are trademarks or

registered trademarks of their respective owners.

© 2000-2010 Vigilant Technology Ltd. All rights reserved.

Document VGLNT-MD-ENG-102-04-10-EXH

www.vglnt.comFollow us on twitter.com/vglnt


Recommended