· Product will be available in a 24-inch clear opening. ... • Gray cast iron meets ASTM A48...

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com

DESCRIPTIoN PRoDuCT NuMBER

24" REXuS DI MH F & C - Plain 62114 24 P24" REXuS DI MH F & C - Sewer 62114 24 S24" REXuS DI MH F & C - Drain 62114 24 D24" REXuS DI MH F & C - Water 62114 24 WTR24" REXuS DI CB F & Grate 62114 CB3RREXuS Pent Lock with Key 62132 P32 01REXuS Pent Lock without Key 62132 P32 02

Rexus Ductile Iron

Frame & Cover

REXuS manhole covers feature a unique spring bar locking mechanism and a spline located in the hinge hous-ing for improved security; additional locking options are available to further deter unauthorized access and theft. Made from ductile iron — an engineered material that of-fers many advantages over traditional cast iron — REXuS covers deliver excellent performance in all the key areas of concern to municipal engineers.

speCifiCaTions:Manhole cover and frame shall be called REXuS or ap-proved equal. Cover and frame shall be manufactured from Ductile Iron and be 3rd party certified and ISo 9000 approved. Covers shall be hinged and incorporate a 90-degree blocking system to prevent accidental closure. Covers shall be one-man operable using standard tools and shall be capable of withstanding a test load of 100,000 lbs. The cover shall incorporate a spring bar locking system, which automatically activates when the cover is closed. Additional security features to include a device to prevent the cover from being completely removed from the frame. This device shall be capable of being deacti-vated if required. Frames shall be circular, incorporate a seating ring, and have a nominal 24-inch clear opening. Frame depth shall not exceed 4 inches, and the flange shall incorporate bedding slots and bolt holes.

Highlights:Ductile iron•Spring bar locking•Available in 24" opening•Hinged cover•Cover with 90° blocking mechanism•Exceeds H20 loading•optional locking features•Independently certified•

Rexus Frame & Grate

Rexus Frame & Grate In Open Position Showing Hinged Grate

REXUS Anti-Theft Cover Locks

Pent Locking Kit:¼• turn lock actuated by an asymmetrical five-sided bolt head.on-site installation takes five minutes:•

Punch out the center of the locking bolt area.1. Install the kit in compliance with the instructions 2. supplied.

Lock must be operated with the handling key (supplied •with the kit; can be purchased separately).

noTe: See page L-2 for the SCS locking device for Rexus and Pamrex.

Manhole CastingsL-1

L-1

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637 www.ejprescott.com

Pamrex Ductile Iron

Frame & Cover

Designed to handle the rigors of modern traffic condi-tions, PAMREX, with a load bearing strength of 120,000 lbs. is far stronger than traditional castings meeting the AASHTo H20 loading requirement. The superior perfor-mance is achieved through use of ductile iron. The unit is designed with an elastomer gasket which ensures that the unit is silent and stable in use and provides infiltration resistance from surface water run-off. The design features a hinge which enables all covers to be one man operable with standard tools eliminating the risk of serious injury associated with traditional designs. Covers are available in 24", 28" and 32" clear opening and can be fitted with locks for enhanced security.

Features:Ductile iron•Available in 24", 28" and 32" opening•Hinged cover•optional locking features•Independently tested and certified•

noTe: 36" Pamrex with gas arm is available. Contact your local EJP sales office for more information.

PAMREX In Open Position

SCS Locking Device for Pamrex and Rexus


24" PAMREX DI MH F&C - Plain 6211324" PAMREX DI MH F&C - Sewer 62113 124" PAMREX DI MH F&C - Drain 62113 224" PAMREX DI CB Grate 62113 632" PAMREX DI MH F&C - Drain 62113 32 D32" PAMREX DI MH F&C - Plain 62113 32 P32" PAMREX DI MH F&C - Sewer 62113 32 S24" SCS Lock without Key 62132 S24 0224" SCS Lock Key only 62132 S24 0332" SCS Lock with Key 62132 S32 0132" SCS Lock without Key 62132 S32 02

speCifiCaTions:Manhole cover and frame shall be called PAMREX or approved equal. Cover and frame shall be manufactured from Ductile Iron and be 3rd party certified and ISo 9000 approved. Product shall be fully tested in road conditions for a period of at least 2 years. Product design will re-quire that covers are hinged and incorporate a 90-degree blocking system to prevent accidental closure. Cover will allow automatic release of back pressure. Frame shall come complete with an open hinge box and a hinge infiltration plug. Covers shall be one-man operable using standard tools and shall be capable of withstanding a test load of 120,000 lbs. Frames shall be circular and shall incorporate a seating ring capable of withstanding surface water inflow and absorbing shock from routine traffic. Product will be available in a 24-inch clear opening. The frame depth shall not exceed 4 inches, and the flange shall incorporate bedding slots and bolt holes.

0 0

ModelLock only Reference

Key only Reference

Lock And Key Reference

Pamrex 24"/28" C8 C18 C7

Pamrex 32"/ Rexus 24" C18 C18 C15

noTe: 28" size also available. Call for information.

Manhole CastingsL-2

L-2

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com

Pamtight Ductile Iron

Frame & Cover

PAMTIGHT manhole covers are the optimum choice for applications where air- and watertightness are required. Made from ductile iron — an engineered material that offers many advantages over traditional cast iron — PAMTIGHT covers deliver all the benefits of pressure tightness, resis-tance to traffic shock and enhanced ergonomics, providing advanced solutions for today’s public works departments, engineers and maintenance personnel.

speCifiCaTions:Manhole cover and frame shall be called PAMTIGHT or approved equal. Cover and frame shall be manufactured from Ductile Iron. The PAMTIGHT is 3rd party certified and is ISo 9000 approved. Covers shall be fastened to the frame by six clamping claws held by stainless steel bolts. Covers shall incorporate a sealed handling box and be one-man operable using standard tools, and shall be capable of withstanding a test load of 100,000 lbs. Frames shall be circular and be available in a 24-inch clear opening. The frame depth shall not exceed 4 inches, and the flange shall incorporate bedding slots and bolt holes. Cover and frame shall incorporate a seating ring to prevent the ingress and escape of air and water to 14 psi (1 bar) positive or negative. Cover and frame shall be black coated.

Detail of Sealing and Locking Systems

Features:Available in 24" opening•Two rings:•

•Elastomersealingring•Rubberseatingringfastenedby6boltsand

clamping clawsDuctile iron•Class D 400 EN 124•Exceeds H20, AASHTo loading•Closed handling box•


24" x 4" PAMTIGHT DI MH F&C - Sewer 62115 SWR24" x 4" PAMTIGHT DI MH F&C - Plain 62115 PL

PAMTIGHT manhole covers are designed to prevent the infiltration or escape of air and water to a 14-psi (1-bar) positive or negative pressure rating.

Elastomer sealing ring ensures watertightness (con-•firmed during seven-day trial in hydraulic laboratory).Design incorporating both stainless steel bolts (6) and •clamping claws allows higher performance sealing.After opening, cover can be put back in any orientation •and remain pressure tight.

Manhole CastingsL-3

L-3


Maine & Vermont Casting

24" Manhole Frame & Cover

Features:3" lettering•Covers available plain or marked SEWER, DRAIN, •WATER or ELECTRICNonrocking cover•Round grate available•

Specifications:Fully machined frame and cover•Bituminous coated•Diamond pattern on cover•H-20 load rated•Gray cast iron meets ASTM A48 Class 30•Weights:•

6" Frame & Cover ........310 lbs. 8" Frame & Cover ........325 lbs.

24" Catch Basin Frame & GrateSame as above where applicable.

Weights:•6" Frame & Grate .........295 lbs. 8" Frame & Grate .........310 lbs.

DESCRIPTIoN WT. (lbs.)

PRoDuCT NuMBER

24" x 8" MH Frame C-29 205 62091 60024" x 6" MH Frame C-29 190 62092 60024" MH Cover - Sewer C-29 120 62093 60024" MH Cover - Plain C-29 120 62094 60024" MH Cover - Drain C-29 120 62095 60024" MH Cover - Water C-29 120 62097 60024" MH Grate - Round C-29 105 62096 600

Manhole CastingsL-4

L-4

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com

Maine & Vermont Casting


Features:3" lettering•Covers available plain or marked SEWER, DRAIN, •WATER or ELECTRICNonrocking cover•Diamond surface design•Round grate available•

Specifications:Fully machined frame and cover•Type A Frame — Plain vertical walls with flange at •bottomH-20 load rated•Gray cast iron meets ASTM A48 Class 30•Weights:•

6" Frame & Cover ........370 lbs. 8" Frame & Cover ........400 lbs.

24" Catch Basin Frame & GrateSame as above where applicable.

DESCRIPTIoNPRoDuCT NuMBER

LEBARoN24" x 6" Manhole Frame LA246 6504124" x 8" Manhole Frame LA248-1 6504824" Manhole Cover - Sewer L24C1 6510024" Manhole Cover - Plain L24C1 6505024" Manhole Cover - Drain L24C1 6507724" CB Round Grate L24G1 65039

Manhole CastingsL-5

L-5


New Hampshire Standard

32" Manhole Frame & CoverNew Hampshire maintains a clear opening designation

of 30" for its manhole casting. The style shown on this page is used throughout the state.

Features:3" lettering•Covers available plain or marked SEWER, DRAIN or •WATERNonrocking cover•Diamond surface design•Round grate available•

Specifications:Fully machined frame and cover•H-20 load rated•Gray cast iron meets ASTM A48 Class 30•QWP casting is water base asphalt paint coated•Weight:•

Frame ............................235 lbs.Cover ............................220 lbs.Total ..............................455 lbs.

SEWER

30"391/4"

32"

333/4"

13/4"

43/

4 "

313/4"


QWP #3232" x 6" Manhole Frame 62140 60032" Manhole Cover - Sewer 62150 60032" Manhole Cover - Plain 62156 60032" Manhole Cover - Drain 62160 60032" Manhole Cover - Water 62170 60032" Manhole Grate - Round 62171 600

LEBARoN LA326-432" x 6" Manhole Frame 65067 1032" Manhole Cover - Sewer 65068 132" Manhole Cover - Plain 65068 232" Manhole Cover - Drain 65069 132" Manhole Cover - Water 65069 232" Manhole Grate - Round 65070

Manhole CastingsL-6

L-6

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com

Massachusetts Casting

26" Manhole Frame & CoverThe QWP 40-600 has the same dimensions and is made

of the same high-grade material as the “State D.o.T Standard” casting but is an economical alternative.

Features:Economical alternative to DoT standard•3" lettering•Nonrocking cover•Covers available plain or marked SEWER or DRAIN•

Specifications:Fully machined frame and cover•Bituminous coated•State “A” style frame•Diamond pattern on cover•Gray cast iron meets ASTM A48 Class 30•H-20 load rated•Weight: Frame & Cover - 375 lbs.•


26 ¼" x 8" MH Frame #40 62062 60026" MH Cover-Sewer #40 62068 60026" MH Cover-Plain #40 62073 60026" MH Cover-Drain #40 62081 600

noTe: Heavy model castings available upon request.

Manhole CastingsL-7

L-7


Massachusetts Standard

26" Manhole Frame & CoverMassachusetts standard manhole frame and cover has

a clear opening of 24". The manhole casting represented on this page meets the requirements of the state in relation to the specifications of a Type A frame and cover.

Features:3" lettering•Nonrocking cover•Covers available plain or marked SEWER, DRAIN, •WATER or ELECTRICDiamond surface design•

Specifications:Fully machined frame and cover•H-20 load rated•Gray cast iron meets ASTM A48 Class 30•Clear 24" opening•Weight:•

Frame ............................265 lbs.Cover ............................210 lbs.Total ..............................475 lbs.


LEBARoN26" x 8" MH Frame LK110 6505126" MH Cover - Sewer L26C2 6530526" MH Cover - Plain L26C2 6506526" MH Cover - Electric L26C2 65065 126" MH Cover - Drain L26C2 6530626" MH Cover - Water L26C2 65065 15

Manhole CastingsL-8

L-8

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com

Massachusetts Casting

Watertight Manhole Frame & Cover

This is a watertight frame and cover to be used wher-ever there is a need for special precautions against water infiltration into a manhole.

Features:3" lettering•Covers available plain or marked SEWER, DRAIN, •WATER or ELECTRICNonrocking cover•

Specifications:Watertight frame and cover•Fully machined frame and cover•A diamond pattern on the cover•H-20 load rated•Gray cast iron meets ASTM A48 Class 30•Bolts are stainless steel. A • 1⁄8" rubber gasket is used under the cover.Weight:•

Frame & Cover .............475 lbs.

26"11/8"

81/8"

11/8"261/4"

28"

24"

34"

Drill & Tap for 5/8"SS Bolt - 4 Holes

SEWER


QWP26" x 8" MH F&C WT Sewer 62061 1 600

LEBARoN LBB268-326" x 8" MH F&C WT Sewer 65089 1

Manhole CastingsL-9

L-9


Maine, Mass & Vermont Catch Basin

Heavy Duty Catch Basin with 2" Square Openings

The QWP 45-600 2" Square opening Catch Basin offers the same high-grade material as the “State DoT Standard” casting but is an economical alternative. Weight is reduced by removing material in noncritical areas of the casting.

Features:Reduced excess weight•Economical alternative to DoT standard•High strength casting•Nonrocking grate•Solid covers are available•

Specifications:Quality cast frame and grate•Bituminous coated•Nonrocking grate•2" square opening pattern on grate•Gray cast iron meets ASTM A48 Class 30•H-20 load rated•Frame available in 4", 6" and 8" heights, with 3 or 4 •flanges

AA

291/4"

253/4"

241/4"

E

A

B

D

2"

C

2" SQ. Grate Openings

3 an

d 4

Fla

ng

e A

vaila

ble


PRoDuCT NuMBER

QWP 45-60024" x 4" CB Frame 3 Flg. #45 115 62056 60024" x 4" CB Frame 4 Flg. #45 140 62057 60024" x 6" CB Frame 3 Flg. #45 180 62067 60024" x 6" CB Frame 4 Flg. #45 205 62065 60024" x 8" CB Frame 3 Flg. #45 205 62064 60024" x 8" CB Frame 4 Flg. #45 230 62063 600 24" x 2" CB Sq. Grate #45 190 62104 600

FRAMEDIMENSIoNS (inches)

A B C D E4" 22 33¼ 4 2 246" 22 33¼ 6 2 248" 22 33¼ 8 2 24

Manhole CastingsL-10

L-10

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com

Heavy Duty Catch Basin with 2" Square Openings

Specifications:Nonrocking grate•2" square opening pattern on grate•Gray cast iron meets ASTM A48 Class 30•H-20 load rated•Frame available in 4", 6" and 8" heights, with 3 or 4 •flangesWeights: • 3 Flange 4 Flange

Frame-4" .......................205 lbs. ...........235 lbs.Grate .............................185 lbs. ...........185 lbs.Total ..............................390 lbs. ...........420 lbs.Frame-6" .......................200 lbs. ...........215 lbs.Grate .............................185 lbs. ...........185 lbs.Total ..............................385 lbs. ...........400 lbs.Frame-8" .......................265 lbs. ...........295 lbs.Grate .............................185 lbs. ...........185 lbs.Total ..............................450 lbs. ...........480 lbs.

Maine, Mass & Vermont Catch Basin


LEBARoN24" x 4" CB Frame 3 Flg. LF244 6517224" x 4" CB Frame 4 Flg. LF244 NS24" x 6" CB Frame 3 Flg. LF246 6517524" x 6" CB Frame 4 Flg. LF246 6517724" x 8" CB Frame 3 Flg. LF248-2 NS24" x 8" CB Frame 4 Flg. LF248-2 6518424" x 2" CB Sq. Grate L24SG1 65183

CASTINGDIMENSIoNS (inches)

H Io

3 FLG. 4 FLG.LF244 4 22 29" x 32" 32" x 32"LF 246 6 22 29½" x 33" 33" x 33"LF248-2 8 22 30" x 33½" 33½" x 33½"


L-11


MA, ME, NH & VT Heavy Catch Basin

AA

SECTION A-A

7⁄8"23 2"

4"

SQ.

GU

TTER

SID

E

FLOW

22" SQ.

33" SQ.

2"

8"

241⁄4" SQ.253⁄4" SQ.

Bar Type Catch BasinThe QWP 45-600 Bar Type Catch Basin offers the same

weight and the same high-grade material as the “State DoT Standard” casting but is an economical alternative.

Features:Economical alternative to DoT standard•High strength casting•Nonrocking grate•

Specifications:Quality cast frame and grate•Bituminous coated•Nonrocking grate•Bar grate pattern•Gray cast iron meets ASTM A48 Class 30•H-20 load rated•8" frame available with 3 or 4 flanges•


PRoDuCT NuMBER

QWP 45-60024" x 8" CB Frame 3 Flg. #45 205 62064 60024" x 8" CB Frame 4 Flg. #45 230 62063 60024" CB Bar Grate CI #45 210 62103 600


L-12

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com

MA, ME, NH & VT Standard

Catch Basin

24"

H

I

O

2"

Maine Type A & B, Vermont & New Hampshire Type A and Massachusetts

StandardsBar Type Catch Basin

Specifications:Nonrocking grate•Gray cast iron meets ASTM A48 Class 30•H-20 load rated•Frame available in 4", 6" and 8" heights•Available in 3 or 4 flange style•Weights: • 3 Flange 4 Flange



LEBARoN24" x 4" CB Frame 3 Flg. LK125 6517124" x 4" CB Frame 4 Flg. LK125 6517324" x 6" CB Frame 3 Flg. LF246 6517524" x 6" CB Frame 4 Flg. LF246 6517724" x 8" CB Frame 3 Flg. LK120 6526424" x 8" CB Frame 4 Flg. LK121 6526724" Bar Grate L24SG7 65270

CASTINGDIMENSIoNS (inches)

H Io

3 FLG. 4 FLG.LK125 4 22 29" x 32" 32" x 32"LF 246 6 22 29½" x 33" 33" x 33"LK120 8 22 30" x 33" —LK121 8 22 — 33½" x 33½"


L-13


Cascade Catch Basin Frame & Grate

The QWP 45-600 Cascade Catch Basin offers the same high-grade material as the “State DoT Standard” casting but is an economical alternative. Weight is reduced by remov-ing material in noncritical areas of the casting. The cascade grate combines the excellent water handling abilities of the “cascade” principal with safety for bicycle and foot traffic. Wherever sloped roads normally dictate parallel bars and bicycle or foot traffic is expected, this “cascade catch basin” should be used.

Features:Reduced excess weight•Economical alternative to DoT standard•High strength casting•Nonrocking grate•Solid covers are available•

Specifications:Quality cast frame and grate•Bituminous coated•Nonrocking grate•Gray cast iron meets ASTM A48 Class 30•H-20 load rated•Frame available in 4", 6" and 8" heights, with 3 or 4 •flanges

MA, ME, NH & VT

Catch Basin

H

B or BB

22"

241/4"

241/4" SQ.251/2" SQ.

24" SQ.

2"

2"

H1

Details of grate indicate water flow is from left to right

FRAME STyLE

B 3 FLG.

BB 4 FLG.

H (inches)

H1 (inches)

4" x 3 Flange 29¼" —4 13⁄8

4" x 4 Flange — 32¾"6" x 3 Flange 29¼" —

6 33⁄86" x 4 Flange — 32¾"8" x 3 Flange 29¼" —

8 53⁄88" x 4 Flange 32¾"


PRoDuCT NuMBER

QWP 45-60024" x 4" CB Frame 3 Flg #45 115 62056 60024" x 4" CB Frame 4 Flg #45 140 62057 60024" x 6" CB Frame 3 Flg #45 180 62067 60024" x 6" CB Frame 4 Flg #45 205 62065 60024" x 8" CB Frame 3 Flg #45 205 62064 60024" x 8" CB Frame 4 Flg #45 230 62063 60024" Cascade Grate R-L #45 235 62102 600


L-14

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com

MA, ME, NH & VT Standard

Catch Basin

Cascade Catch Basin Frame & Grate

The cascade grate combines the excellent water handling abilities of the “cascade” principal with safety for bicycle and foot traffic. Wherever sloped roads nor-mally dictate parallel bars and bicycle or foot traffic is expected, this “cascade catch basin” should be used.

Specifications:Nonrocking grate•Gray cast iron meets ASTM A48 Class 30•H-20 load rated•Frame available in 4", 6" and 8" heights•Available in 3 or 4 flange style•The LeBaron cascade grate must be ordered either left •or right depending on the direction of flowWeights: • 3 Flange 4 Flange


8"

237/8"

2"

O

CASTINGDIMENSIoN (inches)

o3 FLG. 4 FLG.

LK125 29" x 32" 32" x 32"LF 246 29½" x 33" 33" x 33"LK120 30" x 33" —LK121 — 33½" x 33½"


LEBARoN24" x 4" CB Frame 3 Flg LK125 6517124" x 4" CB Frame 4 Flg LK125 6517324" x 6" CB Frame 3 Flg LF246 6517524" x 6" CB Frame 4 Flg LF246 6517724" x 8" CB Frame 3 Flg LK120 6526424" x 8" CB Frame 4 Flg LK121 65267Cascade Grate oR L24SG14-R 65240Cascade Grate oL L24SG14-L 65241Cascade Grate L24SG18 MDoT 65242


L-15


New Hampshire & Vermont Standard

Catch Basin

Vermont Type B & New Hampshire Type ECascade Type Catch Basin

Frame & GrateThe cascade frame and grate has excellent water

handling capabilities and is used wherever sloped roads dictate parallel bars. Not designed for use in areas subject to bicycle or foot traffic.

Specifications:Nonrocking grate•Gray cast iron meets ASTM A48 Class 30•H-20 load rated•The cascade grate is a bar type design•Weights:•

Frame ............................215 lbs.Grate .............................215 lbs.Total ..............................430 lbs.61/4" 5"

301/2" x 291/2"

205/8" x 231/2"231/4" x 24"


LEBARoN LK45024" Cascade CB Frame LK450 6520624" Cascade CB Grate L2422G1 65207


L-16

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com

New Hampshire Standard

Catch Basin

New Hampshire Type B Standard Catch Basin Frame

with Galvanized Steel or Cast Iron Grate

Specifications:Bicycle and foot traffic safe•Galvanized steel grate standard•H-20 load rated•Gray cast iron meets ASTM A48 Class 30•Weights: • Frame with Steel Grate

3 Flange ........................240 lbs.4 Flange ........................257 lbs.

8"

W x 29"

21/2"

23" x 21"

201/2"x 223/4"

CASTING DIMENSIoN WLK420-3 28½"LK420-4 31¼"


QWP23" x 8" NH B Frame 3 Flg. LK420-3 6218623" x 8" NH B Frame 4 Flg. LK420-4 6218823" x 21" NH B Galvanized Grate —23" x 21" NH B CI Grate L2123G 62187

LEBARoN23" x 8" NH B Frame 3 Flg. LK420-3 6528423" x 8" NH B Frame 4 Flg. LK420-4 6528623" x 21" NH B Galvanized Grate 6530323" x 21" NH B CI Grate L2123G 65299


L-17


Midwest Castings Indiana, Ohio


R-1642 Manhole Frame & Solid Lid

Specifications:Heavy duty•Total weight: 380 lbs.•

R-1642 Manhole Frame, Solid Lid



Specifications:Heavy duty•Total weight:•

R-1772 ..........................250 lbs.

R-1772 - Manhole Frame & Solid Lids


26" x 7" MH Frame R-1642 6609026" MH Cover Sewer R-1642 66091


23" x 7" MH Frame & Cover R-1772 6609323" x 7" MH Frame R-1772 6609623" MH Cover w/gasket R-1772 66096 123" MH Cover w/gasket Sewer R-1772 66096 223" MH Cover w/gasket Storm R-1772 66096 323" MH Cover Solid R-1772 66097


L-18

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com




Specifications:Total weight: 325 lbs.•Furnished with 6-¾" bolt holes on 29¾" bolt circle.•




22" x 4" MH Frame R-1647 6572322" MH Cover Solid R-1668 65734


22" x 6" MH Frame R-1712 68795 122" MH Cvr. Indianapolis San. Swr. -R1712 68795 222" MH Cvr. Indianapolis Storm -R1712 68796 3

Indianapolis Spec.




L-19


Catch Basin Frame & Grate

R-2560 Series Beehive Grates with Frames

Specifications:Suitable for drainage in circumstances where clogging •of a flat grating is a problem. Excellent for roadside or earth ditch catch basins.

R-2560 Beehive Grate with Frame



26" x 7" Beehive Frame & Grate 2560E1 65718


22" x 6" Beehive Grate R-4351-D 65717

CATALoG No.

DIMENSIoNS (inches) WT. lbs.A B C D E F G

R-2560 E-1 25¾ 7⁄8 241⁄8 26½ 35½ 7 6 285

R-4351-D Beehive Grates

Specifications:Total weight: 80 lbs.•For bell of 18" tile or concrete bell and spigot pipe. •Since pipe is made under many specifications, there is a wide variation in dimensions. Check the grate size as shown on the drawing to be sure it will fit the pipe you are using.

R-4351-D Beehive Grate


L-20

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com


Catch Basin Frames & Grates

R-3010 Curb Inlet Frame, Grate, Curb Box

Specifications:Heavy duty•Total weight: 400 lbs.•Available with grate Type A, Type D,* Type L or Types •DR or DL Reversible. Also available with curb boxes in open or barred style, 1½" vertical radius, Type D, semi-roll 3" radius or roll type 6" radius designs.* Type D grate not recommended for bicycle traffic.•

Ordering Info:Specify grate type, if other than standard type shown.•Specify curb box style, if other than standard style •shown.






24" x 33" Curb Inlet F&G R-3246 65719


20" x 24" Curb Inlet F&G w/Box R-3010 6572024" x 24" Curb Inlet Frame R-3010 6606224" x 24" Inlet Grate R-3010 66062 02


L-21



Catch Basin Frame & Grates

R-3405 Gutter Inlet Frames & Grates

R-3501-TR Inlet For Roll Type Curb

Specifications:Heavy duty•Dump No Waste•Drains to Fresh Water •Total weight: 385 lbs.•

R-3501-TR Inlet For Roll Type CurbIllustrating R-3501-TR (flow right). If flow left is required,

order R-3501-TL.

Square Drainage Grates


23" x 7" Gutter Inlet F&G R-3405 62059 2


24" x 24" CB Grate R-4871 6606324" x 24" CB Grate R-4859-C 66063 1

CAT. No.

DIMENSIoNS (inches) WT. lbs.A B C D E F G H

R-3404

25¾

x 2

5¾

1½ 201⁄8 x 201⁄8

25¾

x 2

5¾

25¾

x 2

5¾

51⁄8 2 x 2 15⁄16 275

R-3405 1½ 22 x 22 6 21⁄8 x 21⁄8 1 345

R-3405-A 2 22 x 22 61⁄8 2¼ x 2¼ 17⁄16 460

R-3405-B 2 22 x 22 61⁄8 2¼ x 2¼ 17⁄16 440

R-3405 Gutter Inlet Frames & Grates



L-22

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com

Midwest Castings Ohio

1000 Frame & CoverFeatures:

Heavy Duty•Machined Bearing Surfaces•

Options:SolidorVentedCovers •ClassicLogoCovers•SpecialLetteredCovers •WatertiteAssembly•AdjustingRings •GasketSealCovers•Type E outer Cover and Type F 8" Dia. Inner Cover•

All 1000 covers and grates can be used with the following frames.


Heavy Duty•Machined Bearing Surfaces•Accepts 1000 covers and grates•

Options:Watertite Assembly•Adjusting Rings•Gasket Seal Covers•

TABLE oF ASSEMBLED WEIGHTS

CAT. No.

CoVER GRATE TyPEBASE

FLANGE DIA. (in.)

FRAME HGT. (in.)

TyPE A, B oR C

(lbs.)

M FLAT (lbs.)

N oVAL (lbs.)

01 BEEHIVE

(lbs.)

1000 300 250 255 260 32¼ 7

1010 440 390 395 400 32¼ 7

1070 365 315 320 325 32¼ 7

Type A Solid Cover1½" dia. flat bosses on cover face

Type B Vented Cover20 - 1¼" diameter holes

Type C Vented Cover2 - 1" diameter holes

Type M Radial Flat GrateApprox. 140 Sq. In. of opening

Type N Oval GrateApprox. 115 sq. in of opening,

height above frame 2¼", Trout Im-age, “Dump No Waste!” lettering

Type 01 Beehive GrateApprox. 140 sq. in. of opening,

Height above frame 5¼", Trout Im-age, “Dump No Waste” lettering

Type 02 Beehive Grate 7" height above frame•Type 03 Beehive Grate 9" height above frame•

23" DIA

25 7/16" DIA

32 1/4" DIA

20 1/4" DIA

7"

1 1/4"

23" DIA

7"

20" DIA

32 1/4" DIA

1 1/4"


L-23





Options:Solid or Vented or Classic Logo Covers•SpecialLetteredCovers •WatertiteAssembly•AdjustingRings •GasketSealCovers•


CAT. No.

GRATE TyPE

M1 FLAT (lbs.)

M2 FLAT (lbs.)

M3 ADA (lbs.)

N oVAL (lbs.)

01 BEEHIVE

(lbs.)

P CoNCAVE

(lbs.)

1037 275 275 285 245 245 2601880 345 345 355 315 315 335

2996 290 290 300 235 230 250

1020 290 290 300 260 260 280

1022-1 270 270 280 240 240 255

1022-2 310 310 320 285 280 300

1022-3 375 375 385 345 345 360

1550 300 300 310 270 270 285

1076 325 325 335 295 290 310

1077 285 285 295 255 255 275

1051 390 390 400 360 355 375

1050Z1 310 310 320 280 280 300

1050Z 510 510 520 480 480 500


CAT. No.

CoVER TyPEBASE

FLANGE DIA. (in.)

FRAME HGT. (in.)

EXTRA HEAVy DuTy (lbs.)

HEAVy DuTy (lbs.)

MEDIuM DuTy (lbs.)

1037 300 265 250 34 41880 375 335 310 32½ 4

2996 290 250 230 34 TF 4½

1020 315 280 255 34 6

1022-1 295 250 235 34 7

1022-2 340 300 280 34 7

1022-3 400 365 340 36 7

1550 330 290 270 34 8

1076 350 315 290 36½ 8

1077 310 275 250 36½ 8

1051 415 375 355 34 9

1050Z1 335 300 275 34 9

1050Z 535 500 475 36 9

Type A Solid Cover

Type M1 Radial Flat GrateApprox. 120 sq. in. of opening, Trout Image, “Dump No Waste!” lettering

Type M2 Flat Bar GrateApprox. 150 sq. in. of opening

Type M3 ADA GrateApprox. 120 sq. in. of opening

Type N Oval GrateApprox. 135 sq. in of opening,

height above frame 2½"

Type P Concave GrateApprox. 150 sq. in of opening,

Depth of concave 5⁄8"

Type 01 Beehive GrateApprox. 115 sq. in. of opening,

Height above frame 4"

All 1020 covers and grates can be used with the following units.

Type 02 Beehive Grate 7" height above frame•Type 03 Beehive Grate 9" height above frame•


EJ1022 Frame 65747 2EJ1022 Sanitary Lid 65747EJ1022 Storm Lid 65747 1

22 3/4" DIA

20 13/16" DIA

34" DIA

25 1/8" DIA

6"

1 3/4"


L-24

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com



Heavy Duty•90 lbs. (41 kg.) Total Weight•

Options:WatertiteAssembly •CamLockCover•Lug Lock Cover•



1566 Monument BoxFeatures:


Options:Bolted Assembly•



Options:SpecialLetteredCovers •LockLugCover•


Heavy Duty•60 lbs. (27 kg.) Total Weight•Accepts 2965 Covers•

Options:SpecialLetteredCovers •BoltedAssembly•


L-25




HeavyDuty • MachinedBearingSurfaces•

Options:Solid or Vented Covers•Gasket Seal Covers•



Options:SolidorVentedCovers •SpecialLetteredCovers•Grates •WatertiteAssembly•Adjusting Rings•4" Height Reversible Frame - 3020•


CoVER GRATE

A - SoLID B - VENTED (lbs.)

M FLAT HEAVy DuTy (lbs.)

295 270

Type M Flat GrateApprox. 140 sq. in. of opening

Type M Flat GrateApprox. 175 sq. in. of opening


FRAME TyPE

CoVER TyPE GRATE TyPEFRAME HEIGHT

(in.)A - SoLID

B - VENTED (lbs.)

M FLAT HEAVy DuTy

(lbs.)

1600Z 380 320 7¼

1600Z1 340 285 7¼

3020 Rev. 300 240 4


EJ1590 Frame 66230EJ1590 Sanitary Lid 66235EJ1590 Storm Lid 66236


L-26

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com


V-1610/V-1810 Frames & Covers

Features:Heavy Duty•Machined Bearing Surfaces•Reversible Frame (TF = V-1610, BF = V-1810•

Options:Same as V-1600/V-1800 •Grates (see V-3610/V-3810)•

CATALoG NuMBER

PIPE SIZE (in.)*

A C EToTAL

WEIGHT (lbs.)

CoVER DIA. (in.)

CLEAR oPEN.

(in.)

FLG. DIA. (in.)

V-1610-1 12 10¼ 8½ 14½ 65V-1610-2 15 13¼ 11½ 175⁄8 85V-1610-3 18 16¼ 143⁄8 20½ 105V-1610-4 24 217⁄8 20¼ 265⁄8 185V-1610-5 30 277⁄8 263⁄8 32½ 250V-1610-6 36 34 32 38½ 355V-1610-7 42 395⁄8 38¼ 44½ 595V-1610-8 48 45¾ 43¾ 50½ 870

V-1600/V-1800 Frames & Covers

Features:Heavy Duty•Machined Bearing Surfaces•Reversible Frame (TF = V-1600, BF = V-1800•

Options:Solid or Vented and Special Lettered Covers •Logo Covers•Bolted Assemblies•Grates (see V-3600/V-3800)•

Illustrating V-1600-4

CAT.. No.

A B C E FToTAL

WEIGHT (lbs.)

CoVER DIA. (in.)

CoVER THICK.

(in.)

CLEAR oPEN.

(in.)

FLG. DIA. (in.)

HT. (in.)

V-1600-1 19¼ 1½ 18¼ 24 4 150V-1600-2 23½ 1½ 22 28½ 4 215V-1600-3 25¼ 1½ 24 321⁄8 4 235V-1600-4 317⁄8 13⁄8 30 38 4 430V-1600-5 38 2 35¾ 46 6 680V-1600-6 50¼ 2 48 56½ 6 1070

*To Be Used With Vertical Pipe See Table to Left


L-27



5110 Catch Basin InletFeatures:

Heavy Duty•With Type M1 - “Dump No Waste!” lettering•Light Duty Flat Grate (Non-Traffic)•Not Suitable for Bicycle Traffic•Approximately 360 sq. in. of opening•


Heavy Duty•With 5115 Type M2 Flat Grate•Approximately 300 sq. in. of opening•uses 5115 Grates •

Type M4 Medium DutyFlat Grate, Approx. 295 sq. in. of

opening

Type M5 Heavy DutyADA Grate, Approx. 150 sq. in.

of opening

Type M2 Medium DutyFlat Grate, Not suitable for Bicycle Traffic. Approx. 340 sq. in. of open-

ing. “Dump No Waste!” lettering

Type M3 Heavy DutySinusoidal Grate, Approx. 300 sq. in. of opening. “Dump No

Waste!” lettering


GRATE TyPE

M1 LIGHT

M2 HEAVy

M3 “S”

M4 MEDIuM

M5 ADA HEAVy

160 lbs. 185 lbs. 205 lbs. 190 lbs. 235 lbs.


M1 MEDIuM DuTy

M2 HEAVy DuTy

205 lbs. 295 lbs.


EJ15110M3 Catch Basin Inlet 66105 5


L-28

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com



Heavy Duty•Catch Basin Inlet for Roll Type Curb•Approximately 148 sq. in. of opening•395 lbs. (179 kg) Total Weight •


Heavy Duty•Adjustable Assembly•Front Adjusts From 16½" to 18½"•Back Adjusts From 17½" to 19½"•uses 5105 Grates•uses 1795 Base Flange•Approximately 175 sq. in. of opening•745 lbs. (336 kg) Total Weight•


L-29




Heavy Duty•Approximately 200 sq. in. of opening•300 lbs. (138 kg) Total Weight•

Options:8" High Frame - 5235•4" High Frame - V-5622•ADA Grate - V-5622-80•Solid Cover - V-6622•


EJ5250 Catch Basin Inlet 65710


Heavy Duty•Concave Inlet•Approximately 200 sq. in. of opening•630 lbs. (286 kg) Total Weight •


Heavy Duty•Approximately 185 sq. in. of opening•450 lbs. (204 kg) Total Weight•


L-30

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com



Heavy Duty•uses 5344 Grate•Approximately 175 sq. in. of opening•590 lbs. (268 kg) Total Weight•

Options:6" High Reversible Frame - 5370•


Heavy Duty•Double 5342•Approximately 350 sq. in. of opening•990 lbs. (450 kg) Total Weight•


L-31



7022 Catch Basin Curb InletFeatures:

Heavy Duty•With Tpe M1 Grate and T1 Back•Approximately 195 sq. in. of opening•Curb Back Height Adjusts from 5½" to 8½"•Accepts 7020 Grates and Backs•

noTe: See 7020 Table for Assembled Weights

7020 Catch Basin Curb InletFeatures:

Heavy Duty•With Tpe M1 Grate and T1 Back•Approximately 195 sq. in. of opening•Curb Back Height Adjusts from 5½" to 8½"•“Dump No Waste!” Lettering and Fish Image on Back•


BACK TyPE

GRATE TyPEM1

FLATM2 “S”

M3 “S”

T1 400 lbs. 420 lbs. 440 lbs.T2 405 lbs. 425 lbs. 445 lbs.T4 410 lbs. 430 lbs. 450 lbs.T5 410 lbs. 430 lbs. 450 lbs.

Type M2 Sinusoidal GrateApprox. 140 sq. in. of opening

7022 Catch Basin Curb Inlet

Type T4 Back10" Curb Radius, Height Adjusts

from 3" to 7"


from 5" to 11"

Type M3 Sinusoidal GrateApprox. 170 sq. in. of opening, Grate has break-off section so

that curb back can be added when curb is installed

DESCRIPTIoN PRoDuCT NuMBEREJ7022 Catch Basin Curb Inlet 66224


from 5½" to 8"


L-32

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com


7030 Catch Basin Curb InletsFeatures:

Heavy Duty•Type M2 Grate and T1 Back•260 sq. in. of opening•Curb Back Height Adjusts from 3¼" to 9"•“Dump No Waste” Lettering and Fish Image•

Type M4 Vane GrateApprox. 260 sq. in of opening

Type M3 Diagonal Bar GrateApprox. 315 sq. in of opening, 21⁄8" Wide opening Between Bars, Not

Suitable for Bicycle Traffic

Type M5 Diagonal Bar GrateApprox. 225 sq. in of opening,

1¼" Wide openings Between Bars, Not Suitable for Bicycle Traffic

Type M6 Vane GrateApprox. 260 sq. in. of opening


From 4" to 9"

Type T4 Back3" Curb Radius Height Adjusts

From 6" to 11", “Dump No Waste!” Lettering and Fish Image

Type T3 Back12" Concave Curb Radius, No

Curb Adjustment

Type T5 BackNo Curb Radius, Height Adjusts

From 4½" to 8"

Type T6 BackLight Weight Back, 3" (76mm),

Curb Radius, Height Adjusts From 6" to 10", “Dump No

Waste” Lettering and Fish Image


BACK TyPE

GRATE TyPE

M2 FLAT

M3 DIAG.

M4 VANE

M5 DIAG.

M6 VANE

T1 505 lbs. 465 lbs. 495 lbs. 495 lbs. 465 lbs.T2 490 lbs. 450 lbs. 480 lbs. 480 lbs. 450 lbs.T3 470 lbs. 430 lbs. 460 lbs. 460 lbs. 430 lbs.T4 525 lbs. 485 lbs. 515 lbs. 515 lbs. 485 lbs.T5 440 lbs. 400 lbs. 430 lbs. 430 lbs. 400 lbs.T6 470 lbs. 430 lbs. 460 lbs. 460 lbs. 430 lbs.


L-33


Manhole Casting

Accessories

Q-RapManhole Cover Cushion

Q-Rap is designed to reduce noise, Wear and infiltra-tion. It can also be used as a wrap/seal for E-Z Rise and other adjustable valve box risers (see Section E).

Materials:½" Poly-Cotton Jute impregnated with petroleum based •tar of sufficient viscosity to prevent degradation of consistency or shape.½" Cellulose Jute Wadding is to be continuously and •uniformly cross-wrapped with .625 lb. polyfilament wire to maintain shape and allow compression up to approximately 85 to 95% at normal installation tem-peratures.

Packaging:Q-Rap is plastic bag packaged in standard 84" lengths; •enough for one 24" manhole or about 5 valve box risers. other lengths available upon request.

Installation:Clean loose debris from the frame seat and seating ring •on the cover.Place Q-Rap flat on seat, overlap ends by about 2".•Replace cover without disturbing the position of the •Q-Rap.

Flow Direction Catch Basin Liner

Catch Basin Liners are used to direct the flow of water away from the catch basin walls. This helps to eliminate erosion of the walls and extends the life of the catch basin structure.

The Catch Basin Liner is installed under the catch basin frame.


Flow Direction Catch Basin Liner 68896


Q-Rap Cover Cushion 84" 69360Q-Rap Cover Cushion 96" 69360 1


L-34

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com

Manhole Adjusting

Rings

HDPE Recycled Plastic Manhole Adjusting Rings

Lightweight HDPE Manhole Adjusting Rings are manufactured from 100% polyethylene recycled plastic. This makes them easy to lift, transport and place. In return, they also reduce on-the-job injury, lower installation costs and promote high production rates. Improve your infra-structure by using the rings that are made from everyday post-consumer plastic waste.

Features & Benefits:Cost effective• — Saves city/town and contractors life cycle costs. Because of their lightweight (approximately 6 lbs.) installation costs are reduced.Lightweight• — No heavy handling equipment re-quired. Jobs are finished faster with less cost and fewer injuries.High Load Capacity/impact Resistant• — Exceed ASSHTo HS 25 specifications. The rings absorbs tire impact vibration thus slowing deterioration of the con-crete manhole or catch basin.interlocking Design• — Self-aligning and stackable. Easy to store, transport and install. Prevents infiltration and inflow.non-Corrosive• — Will not deteriorate from exposure to sewer gases, road salts or chemicals. Will not add to ground pollution.Varied sizes/slope Rings available• — Made in several manhole sizes. Rings heights available allow matching grade within ¼", two or more rings can be stacked and indexed to match any grade angle. System maintains integrity in uniform transfer of load.Mortarless assembly• — No motar required. Simply apply an approved (ASTM C-990 and AASHTo M-198) butyl rubber sealant between the adjusting rings. The butyl rubber prevents infiltration and inflow.UV & Heat Resistant • — Performance is not compro-mised when exposed to sun or hot asphalt.

MANHoLE SIZE

ADJuSTMENT HEIGHT

PRoDuCT NuMBER

24"

1¼" Q2-24R1251½" Q2-24R1502" Q2-24R2004" Q2-24R400¾" to 1½" Q2-24S150

27"

1¼" Q2-27R1251½" Q2-27R1502" Q2-27R2004" Q2-27R400¾" to 1½" Q2-27S150

30"

1½" Q2-30F1502¼" Q2-30F2254" Q2-30F4001½" to 2¼" Q2-30S225

32"2" Q2-32F2003" Q2-32F3001¼" to 2¼" Q2-32S225

34"2" Q2-34F2003" Q2-34F3001¼" to 2¼" Q2-34S225

24" x 24" Square

Catch Basin

1½" Q2-2424F1502" Q2-2424F2002¾" Q2-2424F2751¼" to 2¾" Q2-2424S275

4" x 50' Waterproof Tape Q3-LS4X506" x 50' Waterproof Tape Q3-LS6X50EZ Stick Roll 3⁄8" x 15' Gasket Q3-EZRoLLEZ Stick Caulk Tube Sealant Q3-EZTuBE

Manhole Frame & Cover Installed After HDPE Adjusting Rings Are Added

HDPE Adjusting Rings Are Added To Bring The Manhole To The Proper Grade


L-35


Round & Square Extension Rings

Extension rings are designed to raise the height of the manhole cover or grate without having to raise the frame. one man can quickly install an extension ring, adjust it and replace the cover.

Benefits:Saves time and money•Lightweight and easy to install•Adjustable for tight fit and close tolerance•Available in 1", 1½" and 2" heights•

Fabricated Steel Specs:Risers are manufactured of A-36 steel.•All welding to American Welding Society specifications.•upper sections are • 3⁄8" thick, lower sections are ¾" thick, continuously welded.Adjustment device is solid ¾" Type 304 stainless steel. •Not plated mild steel nuts, which quickly deteriorate after installation.Adjustment nus are solid 1" x 1¾" C1010 steel.•Coated with black asphalt paint.•

Ordering Info:Various designs to meet all street situations. For best •possible fit, please supply the following information:Cover diameter•Cover thickness•Frame seat inside diameter•The height of rise•


QWP23.75-24.25 x 1 MH Riser Ring 62004 600 123.75-24.25 x 1.5 MH Riser Ring 62004 600 1523.75-24.25 x 2 MH Riser Ring 62004 600 225.75-26.25 x 1 MH Riser Ring 62006 600 125.75-26.25 x 1.5 MH Riser Ring 62006 600 1525.75-26.25 x 2 MH Riser Ring 62006 600 231.75-32.25 x 1 MH Riser Ring 62009 600 131.75-32.25 x 1.5 MH Riser Ring 62009 600 1531.75-32.25 x 2 MH Riser Ring 62009 600 2


LEBARoN24" x 1" Square MH Riser LES2410-3 6610224" x 1.5" Square MH Riser LES2415-3 66102 124" x 2" Square MH Riser LES2420-3 66102 226" x 1" MH Riser Ring LER2610-3 6610326" x 1.5" MH Riser Ring LER2615-5 66103 126" x 2" MH Riser Ring LER2620-5 66103 232" x 1" MH Riser Ring LER3210-3 6610432" x 1.5" MH Riser Ring LER3215-3 66104 132" x 2" MH Riser Ring LER3220-5 66104 2


L-36

Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637

L

www.ejprescott.com

Manhole Rehabilitation

Products

Prescott Plug Prescott Plug is a hydraulic cement material designed

to set in 30 to 45 seconds to stop flowing water through holes and cracks in concrete structures. It may be used indoors or outdoors, above or below grade.

Advantages:Fast setting•

Sets underwater•

Stops running water•

Inexpensive to use•

Sulphate resistant•


Prescott Plug 87025


Prescott Seal Plus 69181

Prescott Seal Plus A one component sealant used in joints, cracks and

holes in concrete, masonry, brick, marble and granite.

Advantages: Adhesion to wet or oily surfaces •

Sticks underwater •

Stretches more then 500% •

Resists ultraviolet light •

Never hardens or cracks •

Stops leaks immediately•


L-37

Date post:	04-Aug-2018
Category:	Documents
Upload:	tranquynh
View:	221 times
Download:	0 times

· Product will be available in a 24-inch clear opening. ... • Gray cast iron meets ASTM A48...

Documents